- 23 Sep, 2020 39 commits
-
-
Oliver Neukum authored
commit 9cdabcb3 upstream. read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 325b0087 upstream. The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ff ("USB: Add UAS driver") Signed-off-by:
-
Penghao authored
commit bcea6daf upstream. Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by:
Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.comSigned-off-by:
-
Yu Kuai authored
[ Upstream commit 0680a622 ] if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f268 ("drm/mediatek: Add HDMI support") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yu Kuai authored
[ Upstream commit 64c194c0 ] mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit b959b978 ] On A20R machines the interrupt pending bits in cause register need to be updated by requesting the chipset to do it. This needs to be done to find the interrupt cause and after interrupt service. In commit 0b888c7f ("MIPS: SNI: Convert to new irq_chip functions") the function to do after service update got lost, which caused spurious interrupts. Fixes: 0b888c7f ("MIPS: SNI: Convert to new irq_chip functions") Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit ec0972ad ] syzbot is reporting OOB read at fbcon_resize() [1], for commit 39b3cffb ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") is by error using registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains zero for that display). We could remove tricky userfont flag [2], for we can determine it by comparing address of the font data and addresses of built-in font data. But since that commit is failing to fix the original OOB read [3], this patch keeps the change minimal in case we decide to revert altogether. [1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920 [2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000 [3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9Reported-by:
syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 39b3cffb ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") Cc: George Kennedy <george.kennedy@oracle.com> Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jpSigned-off-by:
-
Namhyung Kim authored
[ Upstream commit d26383dc ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f956 ("perf tests: Move pmu tests into separate object") Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 564c836f ] Commit 930beb5a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non coherent DMA because of a wrong allocation alignment. Fixes: 930beb5a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 8a39e8c4 ] When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1c ("perf test: Improve bp_signal") Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Michael Kelley authored
[ Upstream commit 911e1987 ] vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message coming from Hyper-V. But if the message isn't found for some reason, the panic path gets hung forever. Add a timeout of 10 seconds to prevent this. Fixes: 41571916 ("Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()") Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/1600026449-23651-1-git-send-email-mikelley@microsoft.comSigned-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit 3c27ea23 ] On Linux 5.9-rc1 I get the following warning with apq8016-sbc: WARNING: CPU: 2 PID: 69 at sound/core/init.c:207 snd_card_new+0x36c/0x3b0 [snd] CPU: 2 PID: 69 Comm: kworker/2:1 Not tainted 5.9.0-rc1 #1 Workqueue: events deferred_probe_work_func pc : snd_card_new+0x36c/0x3b0 [snd] lr : snd_card_new+0xf4/0x3b0 [snd] Call trace: snd_card_new+0x36c/0x3b0 [snd] snd_soc_bind_card+0x340/0x9a0 [snd_soc_core] snd_soc_register_card+0xf4/0x110 [snd_soc_core] devm_snd_soc_register_card+0x44/0xa0 [snd_soc_core] apq8016_sbc_platform_probe+0x11c/0x140 [snd_soc_apq8016_sbc] This warning was introduced in commit 81033c6b ("ALSA: core: Warn on empty module"). It looks like we are supposed to set card->owner to THIS_MODULE. Fix this for all the qcom ASoC drivers. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 79119c79 ("ASoC: qcom: Add Storm machine driver") Fixes: bdb052e8 ("ASoC: qcom: add apq8016 sound card support") Fixes: a6f933f6 ("ASoC: qcom: apq8096: Add db820c machine driver") Fixes: 6b1687bf ("ASoC: qcom: add sdm845 sound card support") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200820154511.203072-1-stephan@gerhold.netSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit e9c006bc ] A new warning in Clang points out that the initialization of mux_pll_src_4plls_p appears incorrect: ../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation] PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ , ../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses around the string literal to silence warning PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ 1 warning generated. Given the name of the variable and the same variable name in rv1108, it seems that this should have been four distinct elements. Fix it up by adding the comma as suggested. Fixes: 307a2e9a ("clk: rockchip: add clock controller for rk3228") Link: https://github.com/ClangBuiltLinux/linux/issues/1123Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200810044020.2063350-1-natechancellor@gmail.comReviewed-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 3dabfa2b ] 'sizeof(*pllen)' should be used in place of 'sizeof(*pllout)' to avoid a small over-allocation. Fixes: 2d172691 ("clk: davinci: New driver for davinci PLL clocks") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200809144959.747986-1-christophe.jaillet@wanadoo.frReviewed-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Huacai Chen authored
[ Upstream commit 15e9e35c ] MIPS defines two kvm types: #define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1 In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform. I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html So I define like this: #define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2 Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Gustav Wiklander authored
[ Upstream commit b59a7ca1 ] In the prepare_message callback the bus driver has the opportunity to split a transfer into smaller chunks. spi_map_msg is done after prepare_message. Function spi_res_release releases the splited transfers in the message. Therefore spi_res_release should be called after spi_map_msg. The previous try at this was commit c9ba7a16 which released the splited transfers after spi_finalize_current_message had been called. This introduced a race since the message struct could be out of scope because the spi_sync call got completed. Fixes this leak on spi bus driver spi-bcm2835.c when transfer size is greater than 65532: Kmemleak: sg_alloc_table+0x28/0xc8 spi_map_buf+0xa4/0x300 __spi_pump_messages+0x370/0x748 __spi_sync+0x1d4/0x270 spi_sync+0x34/0x58 spi_test_execute_msg+0x60/0x340 [spi_loopback_test] spi_test_run_iter+0x548/0x578 [spi_loopback_test] spi_test_run_test+0x94/0x140 [spi_loopback_test] spi_test_run_tests+0x150/0x180 [spi_loopback_test] spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test] spi_drv_probe+0x84/0xe0 Signed-off-by:
Gustav Wiklander <gustavwi@axis.com> Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.comSigned-off-by:
-
Evan Nimmo authored
[ Upstream commit 0a355aeb ] If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip. Signed-off-by:
Evan Nimmo <evan.nimmo@alliedtelesis.co.nz> Reviewed-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Gabriel Krisman Bertazi authored
[ Upstream commit 20d0a107 ] Reading past end of file returns EOF for aligned reads but -EINVAL for unaligned reads on f2fs. While documentation is not strict about this corner case, most filesystem returns EOF on this case, like iomap filesystems. This patch consolidates the behavior for f2fs, by making it return EOF(0). it can be verified by a read loop on a file that does a partial read before EOF (A file that doesn't end at an aligned address). The following code fails on an unaligned file on f2fs, but not on btrfs, ext4, and xfs. while (done < total) { ssize_t delta = pread(fd, buf + done, total - done, off + done); if (!delta) break; ... } It is arguable whether filesystems should actually return EOF or -EINVAL, but since iomap filesystems support it, and so does the original DIO code, it seems reasonable to consolidate on that. Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Sahitya Tummala authored
[ Upstream commit e2cab031 ] If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero. Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block. Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Reviewed-by:
-
David Milburn authored
[ Upstream commit 925dd04c ] Cancel async event work in case async event has been queued up, and nvme_rdma_submit_async_event() runs after event has been freed. Signed-off-by:
David Milburn <dmilburn@redhat.com> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
David Milburn authored
[ Upstream commit e126e821 ] Cancel async event work in case async event has been queued up, and nvme_fc_submit_async_event() runs after event has been freed. Signed-off-by:
-
Stafford Horne authored
[ Upstream commit 3ae90d76 ] I found this when compiling a kbuild random config with GCC 11. The config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS -fno-inline-functions-called-once. This causes the call to cache_loop in cache.c to not be inlined causing the below compile error. In file included from arch/openrisc/mm/cache.c:13: arch/openrisc/mm/cache.c: In function 'cache_loop': ./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ ./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm' 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1 The asm constraint "K" requires a immediate constant argument to mtspr, however because of no inlining a register argument is passed causing a failure. Fix this by using __always_inline. Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit d2b86100 ] Enabling a whole subsystem from a single driver 'select' is frowned upon and won't be accepted in new drivers, that need to use 'depends on' instead. Existing selection of DMAENGINES will then cause circular dependencies. Replace them with a dependency. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 8c6b6c79 ] Since p points at raw xdr data, there's no guarantee that it's NULL terminated, so we should give a length. And probably escape any special characters too. Reported-by:
Zhi Li <yieli@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 644c9f40 ] If a write delegation isn't available, the Linux NFS client uses a zero-stateid when performing a SETATTR. NFSv4.0 provides no mechanism for an NFS server to match such a request to a particular client. It recalls all delegations for that file, even delegations held by the client issuing the request. If that client happens to hold a read delegation, the server will recall it immediately, resulting in an NFS4ERR_DELAY/CB_RECALL/ DELEGRETURN sequence. Optimize out this pipeline bubble by having the client return any delegations it may hold on a file before it issues a SETATTR(zero-stateid) on that file. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 837ba18d ] The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when len=131071 and rx_offset >= 5: spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE ... with iteration values: len = 131071, tx_off = 0, rx_off = 3 with iteration values: len = 131071, tx_off = 0, rx_off = 4 with iteration values: len = 131071, tx_off = 0, rx_off = 5 loopback strangeness - rx changed outside of allowed range at: ...a4321000 spi_msg@ffffffd5a4157690 frame_length: 131071 actual_length: 131071 spi_transfer@ffffffd5a41576f8 len: 131071 tx_buf: ffffffd5a4340ffc Note that rx_offset > 3 can only occur if the SPI controller driver sets ->dma_alignment to a higher value than 4, so most SPI controller drivers are not affect. The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132 KiB (assuming 4 KiB pages). This test uses an initial offset into the rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB, which is also the end of the allocated buffer. But the code which verifies the content of the buffer reads a byte beyond the allocated buffer and spuriously fails because this out-of-bounds read doesn't return the expected value. Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid testing sizes which cause out-of-bounds reads. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.comSigned-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 59ae97a7 ] If the zero duty cycle doesn't correspond to any voltage in the voltage table, the PWM regulator returns an -EINVAL from get_voltage_sel() which results in the core erroring out with a "failed to get the current voltage" and ending up not applying the machine constraints. Instead, return -ENOTRECOVERABLE which makes the core set the voltage since it's at an unknown value. For example, with this device tree: fooregulator { compatible = "pwm-regulator"; pwms = <&foopwm 0 100000>; regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2250000>; regulator-name = "fooregulator"; regulator-always-on; regulator-boot-on; voltage-table = <2250000 30>; }; Before this patch: fooregulator: failed to get the current voltage(-22) After this patch: fooregulator: Setting 2250000-2250000uV fooregulator: 2250 mV Signed-off-by:
-
James Smart authored
[ Upstream commit 7b08e89f ] The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI. In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops. Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr. Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.comCo-developed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Javed Hasan authored
[ Upstream commit 5a5b80f9 ] Fix for '&fp->skb' double free. Link: https://lore.kernel.org/r/20200825093940.19612-1-jhasan@marvell.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit ea403fde ] When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cnAcked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Olga Kornievskaia authored
[ Upstream commit 3d7a9520 ] A client should be able to handle getting an ERR_DELAY error while doing a LOCK call to reclaim state due to delegation being recalled. This is a transient error that can happen due to server moving its volumes and invalidating its file location cache and upon reference to it during the LOCK call needing to do an expensive lookup (leading to an ERR_DELAY error on a PUTFH). Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
Haiyang Zhang authored
commit 4d820543 upstream. When using vf_ops->ndo_select_queue, the number of queues of VF is usually bigger than the synthetic NIC. This condition may happen often. Remove "unlikely" from the comparison of ndev->real_num_tx_queues. Fixes: b3bf5666 ("hv_netvsc: defer queue selection to VF") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Miaohe Lin authored
commit eabe8618 upstream. pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear(). we should handle this correctly or we would get wrong sk_buff. Fixes: 6fa01ccd ("skbuff: Add pskb_extract() helper function") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Naresh Kumar PBS authored
commit 847b9788 upstream. Some adapters report more than 256 gid entries. Restrict it to 256 for now. Fixes: 1ac5a404("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1598292876-26529-6-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Bob Peterson authored
commit cbcc89b6 upstream. Since transactions may be freed shortly after they're created, before a log_flush occurs, we need to initialize their ail1 and ail2 lists earlier. Before this patch, the ail1 list was initialized in gfs2_log_flush(). This moves the initialization to the point when the transaction is first created. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by:
-
Quinn Tran authored
commit 0aca7784 upstream. - Reduce sess_lock holding to prevent CPU Lock up. sess_lock was held across fc_port registration and deletion. These calls can be blocked by upper layer. Sess_lock is also being accessed by interrupt thread. - Reduce number of loops in processing work_list to prevent kernel complaint of CPU lockup or holding sess_lock. Reported-by:
Zhengyuan Liu <liuzhengyuan@kylinos.cn> Tested-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Quinn Tran authored
commit cd4ed6b4 upstream. Currently, the rport registration is being called from a single work element that is used to process QLA internal "work_list". This work_list is meant for quick and simple task (ie no sleep). The Rport registration process sometime can be delayed by upper layer. This causes back pressure with the internal queue where other jobs are unable to move forward. This patch will schedule the registration process with a new work element (fc_port.reg_work). While the RPort is being registered, the current state of the fcport will not move forward until the registration is done. If the state of the fabric has changed, a new field/next_disc_state will record the next action on whether to 'DELETE' or 'Reverify the session/ADISC'. Signed-off-by:
-
Quinn Tran authored
commit cb873ba4 upstream. Rename rscn_rcvd field to scan_needed to be more meaningful. Signed-off-by:
-
Daniel Mack authored
commit 1ed9ec9b upstream. The driver for Marvell switches puts all ports in IGMP snooping mode which results in all IGMP/MLD frames that ingress on the ports to be forwarded to the CPU only. The bridge code in the kernel can then interpret these frames and act upon them, for instance by updating the mdb in the switch to reflect multicast memberships of stations connected to the ports. However, the IGMP/MLD frames must then also be forwarded to other ports of the bridge so external IGMP queriers can track membership reports, and external multicast clients can receive query reports from foreign IGMP queriers. Currently, this is impossible as the EDSA tagger sets offload_fwd_mark on the skb when it unwraps the tagged frames, and that will make the switchdev layer prevent the skb from egressing on any other port of the same switch. To fix that, look at the To_CPU code in the DSA header and make forwarding of the frame possible for trapped IGMP packets. Introduce some #defines for the frame types to make the code a bit more comprehensive. This was tested on a Marvell 88E6352 variant. Signed-off-by:
Daniel Mack <daniel@zonque.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
- 17 Sep, 2020 1 commit
-
-
Greg Kroah-Hartman authored
Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
