- 20 Jun, 2017 40 commits
-
-
Sachin Prabhu authored
commit 4214ebf4 upstream. Fix memory leaks introduced by the patch Fs/cifs: make share unaccessible at root level mountable Also move allocation of cifs_sb->prepath to cifs_setup_cifs_sb(). Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Tested-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Acked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Benjamin Poirier authored
commit 277964e1 upstream. vmxnet3_reset_work() expects tx queues to be stopped (via vmxnet3_quiesce_dev -> netif_tx_disable). However, this races with the netif_wake_queue() call in netif_tx_timeout() such that the driver's start_xmit routine may be called unexpectedly, triggering one of the BUG_ON in vmxnet3_map_pkt with a stack trace like this: RIP: 0010:[<ffffffffa00cf4bc>] vmxnet3_map_pkt+0x3ac/0x4c0 [vmxnet3] [<ffffffffa00cf7e0>] vmxnet3_tq_xmit+0x210/0x4e0 [vmxnet3] [<ffffffff813ab144>] dev_hard_start_xmit+0x2e4/0x4c0 [<ffffffff813c956e>] sch_direct_xmit+0x17e/0x1e0 [<ffffffff813c96a7>] __qdisc_run+0xd7/0x130 [<ffffffff813a6a7a>] net_tx_action+0x10a/0x200 [<ffffffff810691df>] __do_softirq+0x11f/0x260 [<ffffffff81472fdc>] call_softirq+0x1c/0x30 [<ffffffff81004695>] do_softirq+0x65/0xa0 [<ffffffff81069b89>] local_bh_enable_ip+0x99/0xa0 [<ffffffffa031ff36>] destroy_conntrack+0x96/0x110 [nf_conntrack] [<ffffffff813d65e2>] nf_conntrack_destroy+0x12/0x20 [<ffffffff8139c6d5>] skb_release_head_state+0xb5/0xf0 [<ffffffff8139d299>] skb_release_all+0x9/0x20 [<ffffffff8139cfe9>] __kfree_skb+0x9/0x90 [<ffffffffa00d0069>] vmxnet3_quiesce_dev+0x209/0x340 [vmxnet3] [<ffffffffa00d020a>] vmxnet3_reset_work+0x6a/0xa0 [vmxnet3] [<ffffffff8107d7cc>] process_one_work+0x16c/0x350 [<ffffffff810804fa>] worker_thread+0x17a/0x410 [<ffffffff810848c6>] kthread+0x96/0xa0 [<ffffffff81472ee4>] kernel_thread_helper+0x4/0x10 Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Trond Myklebust authored
commit 809fd143 upstream. If the OPEN rpc call to the server fails with an ENOENT call, nfs_atomic_open will create a negative dentry for that file, however it currently fails to call nfs_set_verifier(), thus causing the dentry to be immediately revalidated on the next call to nfs_lookup_revalidate() instead of following the usual lookup caching rules. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Fabien Parent authored
commit 43849785 upstream. Read access to the SPI flash are broken on da850-evm, i.e. the data read is not what is actually programmed on the flash. According to the datasheet for the M25P64 part present on the da850-evm, if the SPI frequency is higher than 20MHz then the READ command is not usable anymore and only the FAST_READ command can be used to read data. This commit specifies in the DTS that we should use FAST_READ command instead of the READ command. Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Fabien Parent <fparent@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Mark Rutland authored
commit ddc37832 upstream. On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an undefined instruction trap within write_wb_reg. This is because Scorpion CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if the core is not powered down. When DBGPRSR.SPD is set, breakpoint and watchpoint registers are treated as undefined. It's possible to trigger similar crashes later on from userspace, by requesting the kernel to install a breakpoint or watchpoint, as we can go idle at any point between the reset of the debug registers and their later use. This has always been the case. Given that this has always been broken, no-one has complained until now, and there is no clear workaround, disable hardware breakpoints and watchpoints on Scorpion to avoid these issues. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Quinn Tran authored
commit fc1ffd6c upstream. During code inspection, while investigating following stack trace seen on one of the test setup, we found out there was possibility of memory leak becuase driver was not unwinding the stack properly. This issue has not been reproduced in a test environment or on a customer setup. Here's stack trace that was seen. [1469877.797315] Call Trace: [1469877.799940] [<ffffffffa03ab6e9>] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx] [1469877.806980] [<ffffffffa03ac50a>] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx] [1469877.814013] [<ffffffff813b6d01>] ? __pm_runtime_resume+0x51/0xa0 [1469877.820265] [<ffffffff8157c1f5>] ? _raw_spin_lock_irqsave+0x25/0x90 [1469877.826776] [<ffffffff8157cd2d>] ? _raw_spin_unlock_irqrestore+0x6d/0x80 [1469877.833720] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.839885] [<ffffffff8157cd0c>] ? _raw_spin_unlock_irqrestore+0x4c/0x80 [1469877.846830] [<ffffffff81319b9c>] local_pci_probe+0x4c/0xb0 [1469877.852562] [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100 [1469877.858727] [<ffffffff81319c89>] pci_call_probe+0x89/0xb0 Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch description ] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 89e9f7bc upstream. Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606Reported-by:
Martin Burnicki <martin.burnicki@meinberg.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Niklas Söderlund authored
commit 5d7400c4 upstream. Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if the operation get_bias() is implemented but the pin is not handled by the get_bias() implementation. In that case the output will state that "input bias disabled" indicating that this pin has bias control support. Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also solves the issue where SoC specific implementations print error messages if their particular implementation of {set,get}_bias() is called with a pin it does not know about. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Akinobu Mita authored
commit 802c0388 upstream. The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Augusto Mecking Caringi authored
commit c8a6a09c upstream. In ca91cx42_slave_get function, the value pointed by vme_base pointer is set through: *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); So it must be dereferenced to be used in calculation of pci_base: *pci_base = (dma_addr_t)*vme_base + pci_offset; This bug was caught thanks to the following gcc warning: drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’: drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] *pci_base = (dma_addr_t)vme_base + pci_offset; Signed-off-by:
Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-By:
Martyn Welch <martyn@welchs.me.uk> Signed-off-by:
-
Vlad Tsyrklevich authored
commit 30f939fe upstream. i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by:
Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Dmitry Torokhov authored
commit 7c5bb4ac upstream. Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by:
Paweł Bylica <chfast@gmail.com> Tested-by:
Ed Bordin <edbordin@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by:
-
Akinobu Mita authored
commit 9723ddc8 upstream. This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by:
-
Akinobu Mita authored
commit 08fea55e upstream. This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by:
-
Maxime Ripard authored
commit 259b77ef upstream. The TCA8418 might be used using different interrupt triggers on various boards. This is not working so far because the current code forces a falling edge trigger. The device tree already provides a trigger type, so let's use whatever it sets up, and since we can be loaded without DT, keep the old behaviour for the non-DT case. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Raphael Assenat authored
commit 45536d37 upstream. Postpone axis initialization to the first open instead of doing it in joydev_connect. This is to make sure the generated startup events are representative of the current joystick state rather than what it was when joydev_connect() was called, potentially much earlier. Once the first user is connected to joydev node we'll be updating joydev->abs[] values and subsequent clients will be getting correct initial states as well. This solves issues with joystick driven menus that start scrolling up each time they are started, until the user moves the joystick to generate events. In emulator menu setups where the menu program is restarted every time the game exits, the repeated need to move the joystick to stop the unintended scrolling gets old rather quickly... Signed-off-by:
Raphael Assenat <raph@raphnet.net> Signed-off-by:
-
Johan Hovold authored
commit cb1b4946 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 59cf8bed upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Signed-off-by:
-
Kai-Heng Feng authored
commit 45838660 upstream. The aux port does not get detected without noloop quirk, so external PS/2 mouse cannot work as result. The PS/2 mouse can work with this quirk. BugLink: https://bugs.launchpad.net/bugs/1591053Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Pavel Rojtberg authored
commit b6fc513d upstream. currently the controllers get the same product id as the wireless receiver. However the controllers actually have their own product id. The patch makes the driver expose the same product id as the windows driver. This improves compatibility when running applications with WINE. see https://github.com/paroj/xpad/issues/54Signed-off-by:
Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 1ebb7114 upstream. Make sure we have enough of a report structure to validate before looking at it. Reported-by:
Benoit Camredon <benoit.camredon@airbus.com> Tested-by:
-
Michal Tesar authored
commit 7ababb78 upstream. 5.2. Action on Reception of a Query When a system receives a Query, it does not respond immediately. Instead, it delays its response by a random amount of time, bounded by the Max Resp Time value derived from the Max Resp Code in the received Query message. A system may receive a variety of Queries on different interfaces and of different kinds (e.g., General Queries, Group-Specific Queries, and Group-and-Source-Specific Queries), each of which may require its own delayed response. Before scheduling a response to a Query, the system must first consider previously scheduled pending responses and in many cases schedule a combined response. Therefore, the system must be able to maintain the following state: o A timer per interface for scheduling responses to General Queries. o A per-group and interface timer for scheduling responses to Group- Specific and Group-and-Source-Specific Queries. o A per-group and interface list of sources to be reported in the response to a Group-and-Source-Specific Query. When a new Query with the Router-Alert option arrives on an interface, provided the system has state to report, a delay for a response is randomly selected in the range (0, [Max Resp Time]) where Max Resp Time is derived from Max Resp Code in the received Query message. The following rules are then used to determine if a Report needs to be scheduled and the type of Report to schedule. The rules are considered in order and only the first matching rule is applied. 1. If there is a pending response to a previous General Query scheduled sooner than the selected delay, no additional response needs to be scheduled. 2. If the received Query is a General Query, the interface timer is used to schedule a response to the General Query after the selected delay. Any previously pending response to a General Query is canceled. --8<-- Currently the timer is rearmed with new random expiration time for every incoming query regardless of possibly already pending report. Which is not aligned with the above RFE. It also might happen that higher rate of incoming queries can postpone the report after the expiration time of the first query causing group membership loss. Now the per interface general query timer is rearmed only when there is no pending report already scheduled on that interface or the newly selected expiration time is before the already pending scheduled report. Signed-off-by:
Michal Tesar <mtesar@redhat.com> Signed-off-by:
-
Reiter Wolfgang authored
commit 3b48ab22 upstream. Final nlmsg_len field update must reflect inserted net_dm_drop_point data. This patch depends on previous patch: "drop_monitor: add missing call to genlmsg_end" Signed-off-by:
Reiter Wolfgang <wr0112358@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Reiter Wolfgang authored
commit 4200462d upstream. Update nlmsg_len field with genlmsg_end to enable userspace processing using nlmsg_next helper. Also adds error handling. Signed-off-by:
-
stephen hemminger authored
commit a50af86d upstream. Hyper-V (and Azure) support using NVGRE which requires some extra space for encapsulation headers. Because of this the largest allowed TSO packet is reduced. For older releases, hard code a fixed reduced value. For next release, there is a better solution which uses result of host offload negotiation. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Thomas Gleixner authored
commit c1a9eeb9 upstream. When a disfunctional timer, e.g. dummy timer, is installed, the tick core tries to setup the broadcast timer. If no broadcast device is installed, the kernel crashes with a NULL pointer dereference in tick_broadcast_setup_oneshot() because the function has no sanity check. Reported-by:
Mason <slash.tmp@free.fr> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Richard Cochran <rcochran@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Sebastian Frias <sf84@laposte.net> Cc: Thibaud Cornic <thibaud_cornic@sigmadesigns.com> Cc: Robin Murphy <robin.murphy@arm.com> Link: http://lkml.kernel.org/r/1147ef90-7877-e4d2-bb2b-5c4fa8d3144b@free.frSigned-off-by:
-
Paul Burton authored
commit 2f5281ba upstream. cpmac_start_xmit() used the max() macro on skb->len (an unsigned int) and ETH_ZLEN (a signed int literal). This led to the following compiler warning: In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/net/ethernet/ti/cpmac.c:19: drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max' len = max(skb->len, ETH_ZLEN); ^ On top of this, it assigned the result of the max() macro to a signed integer whilst all further uses of it result in it being cast to varying widths of unsigned integer. Fix this up by using max_t to ensure the comparison is performed as unsigned integers, and for consistency change the type of the len variable to unsigned int. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0335695d upstream. The current_user_ns() macro currently returns &init_user_ns when user namespaces are disabled, and that causes several warnings when building with gcc-6.0 in code that compares the result of the macro to &init_user_ns itself: fs/xfs/xfs_ioctl.c: In function 'xfs_ioctl_setattr_check_projid': fs/xfs/xfs_ioctl.c:1249:22: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (current_user_ns() == &init_user_ns) This is a legitimate warning in principle, but here it isn't really helpful, so I'm reprasing the definition in a way that shuts up the warning. Apparently gcc only warns when comparing identical literals, but it can figure out that the result of an inline function can be identical to a constant expression in order to optimize a condition yet not warn about the fact that the condition is known at compile time. This is exactly what we want here, and it looks reasonable because we generally prefer inline functions over macros anyway. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: David Howells <dhowells@redhat.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt authored
commit 8329e818 upstream. Matt Fleming reported seeing crashes when enabling and disabling function profiling which uses function graph tracer. Later Namhyung Kim hit a similar issue and he found that the issue was due to the jmp to ftrace_stub in ftrace_graph_call was only two bytes, and when it was changed to jump to the tracing code, it overwrote the ftrace_stub that was after it. Masami Hiramatsu bisected this down to a binutils change: 8dcea93252a9ea7dff57e85220a719e2a5e8ab41 is the first bad commit commit 8dcea93252a9ea7dff57e85220a719e2a5e8ab41 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri May 15 03:17:31 2015 -0700 Add -mshared option to x86 ELF assembler This patch adds -mshared option to x86 ELF assembler. By default, assembler will optimize out non-PLT relocations against defined non-weak global branch targets with default visibility. The -mshared option tells the assembler to generate code which may go into a shared library where all non-weak global branch targets with default visibility can be preempted. The resulting code is slightly bigger. This option only affects the handling of branch instructions. Declaring ftrace_stub as a weak call prevents gas from using two byte jumps to it, which would be converted to a jump to the function graph code. Link: http://lkml.kernel.org/r/20160516230035.1dbae571@gandalf.local.homeReported-by:
Matt Fleming <matt@codeblueprint.co.uk> Reported-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Al Viro authored
commit 128394ef upstream. Both damn things interpret userland pointers embedded into the payload; worse, they are actually traversing those. Leaving aside the bad API design, this is very much _not_ safe to call with KERNEL_DS. Bail out early if that happens. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Geoff Levand authored
commit 6dff5b67 upstream. GCC 5 generates different code for this bootwrapper null check that causes the PS3 to hang very early in its bootup. This check is of limited value, so just get rid of it. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Al Viro authored
commit c0cf3ef5 upstream. What matters when deciding if we should make a page uptodate is not how much we _wanted_ to copy, but how much we actually have copied. As it is, on architectures that do not zero tail on short copy we can leave uninitialized data in page marked uptodate. Signed-off-by:
-
Ilya Dryomov authored
commit 5c056fdc upstream. After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b), the client gets back a ceph_x_authorize_reply, which it is supposed to verify to ensure the authenticity and protect against replay attacks. The code for doing this is there (ceph_x_verify_authorizer_reply(), ceph_auth_verify_authorizer_reply() + plumbing), but it is never invoked by the the messenger. AFAICT this goes back to 2009, when ceph authentication protocols support was added to the kernel client in 4e7a5dcd ("ceph: negotiate authentication protocol; implement AUTH_NONE protocol"). The second param of ceph_connection_operations::verify_authorizer_reply is unused all the way down. Pass 0 to facilitate backporting, and kill it in the next commit. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Gerald Schaefer authored
commit 5457e03d upstream. The buffer for iucv_message_receive() needs to be below 2 GB. In __iucv_message_receive(), the buffer address is casted to an u32, which would result in either memory corruption or an addressing exception when using addresses >= 2 GB. Fix this by using GFP_DMA for the buffer allocation. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin K. Petersen authored
commit 7c856152 upstream. We previously made sure that the reported disk capacity was less than 0xffffffff blocks when the kernel was not compiled with large sector_t support (CONFIG_LBDAF). However, this check assumed that the capacity was reported in units of 512 bytes. Add a sanity check function to ensure that we only enable disks if the entire reported capacity can be expressed in terms of sector_t. Reported-by:
Steve Magnani <steve.magnani@digidescorp.com> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
commit a00a7862 upstream. Kefeng Wang discovered that old versions of the QEMU CD driver would return mangled mode data causing us to walk off the end of the buffer in an attempt to parse it. Sanity check the returned mode sense data. Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
Anton Blanchard authored
commit 85e8a239 upstream. We see lpfc devices regularly fail during kexec. Fix this by adding a shutdown method which mirrors the remove method. Signed-off-by:
Anton Blanchard <anton@samba.org> Reviewed-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Tested-by:
-
Nicholas Bellinger authored
commit a04e54f2 upstream. The following fixes a divide by zero OOPs with TYPE_TAPE due to pscsi_tape_read_blocksize() failing causing a zero sd->sector_size being propigated up via dev_attrib.hw_block_size. It also fixes another long-standing bug where TYPE_TAPE and TYPE_MEDIMUM_CHANGER where using pscsi_create_type_other(), which does not call scsi_device_get() to take the device reference. Instead, rename pscsi_create_type_rom() to pscsi_create_type_nondisk() and use it for all cases. Finally, also drop a dump_stack() in pscsi_get_blocks() for non TYPE_DISK, which in modern target-core can get invoked via target_sense_desc_format() during CHECK_CONDITION. [js] cast max_sectors to unsigned to avoid warnings Reported-by:
Malcolm Haak <insanemal@gmail.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Long Li authored
commit 40630f46 upstream. On I/O errors, the Windows driver doesn't set data_transfer_length on error conditions other than SRB_STATUS_DATA_OVERRUN. In these cases we need to set data_transfer_length to 0, indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN, data_transfer_length is set by the Windows driver to the actual data transferred. Reported-by:
Shiva Krishna <Shiva.Krishna@nimblestorage.com> Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Long Li authored
commit bba5dc33 upstream. When sense message is present on error, we should pass along to the upper layer to decide how to deal with the error. This patch fixes connectivity issues with Fiber Channel devices. Signed-off-by:
-
