- 11 Dec, 2010 3 commits
-
-
Jon Mason authored
Move function locations to remove the need for internal declarations and other misc clean-ups. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Arpit Patel <arpit.patel@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The nf_pre_routing functions in bridging have collected two distinct ways of returning NF_DROP over the years, inline and via goto. There is no reason for preferring either one. So this patch arbitrarily picks the inline variant and converts the all the gotos. Also removes a redundant comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Dec, 2010 33 commits
-
-
Ben Hutchings authored
Various drivers are using implementations of ethtool_ops::get_link that are equivalent to the default ethtool_op_get_link(). Change them to use that instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
While an interface is down, many implementations of ethtool_ops::get_link, including the default, ethtool_op_get_link(), will report the last link state seen while the interface was up. In general the current physical link state is not available if the interface is down. Define ETHTOOL_GLINK to reflect whether the interface *and* any physical port have a working link, and consistently return 0 when the interface is down. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds support in enic 802.1Qbh port profile provisioning code to use the mac address set by IFLA_VF_MAC. For now we handle this mac as a special case for a VM mac address sent to us by libvirt. The VM mac address is sent to the switch along with the rest of the port profile provisioning data. This patch also adds calls to register and deregister the mac address during port profile association/deassociation. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch implements the ndo_set_vf_mac netdev operation for enic dynamic devices. It treats the mac address set by IFLA_VF_MAC as a special case to use it in the port profile provisioning data. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
Add ndo_set_rx_mode support to register unicast and multicast address filters for enic devices Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Junchang Wang authored
We know for sure pktgen is going to write skb->data right after *_alloc_skb, causing unnecessary cache misses. Idea is to add a prefetchw() call to prefetch the first cache line indicated by skb->data. On systems with Adjacent Cache Line Prefetch, it's probably two cache lines are prefetched. With this patch, pktgen on Intel SR1625 server with two E5530 quad-core processors and a single ixgbe-based NIC went from 8.63Mpps to 9.03Mpps, with 4.6% improvement. Signed-off-by: Junchang Wang <junchangwang@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
This driver now uses Generic Receive Offload, not the older LRO. Change references to LRO in names and comments. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Willi authored
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Willi authored
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Willi authored
The XFRMA_TFCPAD attribute for XFRM state installation configures Traffic Flow Confidentiality by padding ESP packets to a specified length. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
rq and tq are both protected by tx queue lock, so we can simply use the lockless variants of skb_queue. skb_queue_splice_tail_init() is used instead of the open coded and slow one. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
These debug stats are not exported, and become useless. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jan Glauber authored
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
OSA l3 mode is hw accelerated VLAN only for IPv4. Take care we add the vlan hdr to a passthru frame in the device driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Einar Lueck authored
Only work through the IP adddress to do list if the card is UP or SOFTSETUP. Enables to configure VIPA add/del in offline mode. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Einar Lueck authored
Function qeth_l3_arp_query now queries for IPv6 addresses, too, if QETH_QARP_WITH_IPV6 is passed as parameter to the ioctl. HiperSockets and GuestLAN in HiperSockets mode provide corresponding entries. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
skb1 should be passed as parameter to sk_rcvqueues_full() here. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We accidently set it to "true" for the case where we are using a route bound peer. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
If br_multicast_new_group returns NULL, we would return 0 (no error) to the caller of br_multicast_add_group, which is not what we want. Instead br_multicast_new_group should return ERR_PTR(-ENOMEM) in this case. Also propagate the error number returned by br_mdb_rehash properly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
-
Shan Wei authored
Remove macros which have been unused since the initial implementation (commit 7c657876, [DCCP]: Initial implementation from Tue Aug 9 20:14:34 2005 -0700). Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
-
Vladislav Zolotarov authored
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
bnx2x_src_init_t2() is used only when BCM_CNIC is defined. So, to avoid a compilation warning, we won't define it unless BCM_CNIC is defined. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Make the LSO code work on BE platforms: parsing_data field of a parsing BD (PBD) for 57712 was improperly composed which made FW read wrong values for TCP header's length and offset and, as a result, the corresponding PCI device was performing bad DMA reads triggering EEH. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
__load_pointer() checks data we fetch from skb is included in head portion, but assumes we fetch one byte, instead of up to four. This wont crash because we have extra bytes (struct skb_shared_info) after head, but this can read uninitialized bytes. Fix this using size of the data (1, 2, 4 bytes) in the test. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jozsef Kadlecsik authored
The current jhash.h implements the lookup2() hash function by Bob Jenkins. However, lookup2() is outdated as Bob wrote a new hash function called lookup3(). The patch replaces the lookup2() implementation of the 'jhash*' functions with that of lookup3(). You can read a longer comparison of the two and other hash functions at http://burtleburtle.net/bob/hash/doobs.html. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Followup of commit b178bb3d (net: reorder struct sock fields) Optimize INET input path a bit further, by : 1) moving sk_refcnt close to sk_lock. This reduces number of dirtied cache lines by one on 64bit arches (and 64 bytes cache line size). 2) moving inet_daddr & inet_rcv_saddr at the beginning of sk (same cache line than hash / family / bound_dev_if / nulls_node) This reduces number of accessed cache lines in lookups by one, and dont increase size of inet and timewait socks. inet and tw sockets now share same place-holder for these fields. Before patch : offsetof(struct sock, sk_refcnt) = 0x10 offsetof(struct sock, sk_lock) = 0x40 offsetof(struct sock, sk_receive_queue) = 0x60 offsetof(struct inet_sock, inet_daddr) = 0x270 offsetof(struct inet_sock, inet_rcv_saddr) = 0x274 After patch : offsetof(struct sock, sk_refcnt) = 0x44 offsetof(struct sock, sk_lock) = 0x48 offsetof(struct sock, sk_receive_queue) = 0x68 offsetof(struct inet_sock, inet_daddr) = 0x0 offsetof(struct inet_sock, inet_rcv_saddr) = 0x4 compute_score() (udp or tcp) now use a single cache line per ignored item, instead of two. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Dec, 2010 2 commits
-
-
David S. Miller authored
Use helper functions to hide all direct accesses, especially writes, to dst_entry metrics values. This will allow us to: 1) More easily change how the metrics are stored. 2) Implement COW for metrics. In particular this will help us put metrics into the inetpeer cache if that is what we end up doing. We can make the _metrics member a pointer instead of an array, initially have it point at the read-only metrics in the FIB, and then on the first set grab an inetpeer entry and point the _metrics member there. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
-
David S. Miller authored
drivers/net/can/slcan.c: In function 'slcan_open': drivers/net/can/slcan.c:568: error: dereferencing pointer to incomplete type Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Dec, 2010 2 commits
-
-
David S. Miller authored
Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
-
Eric Dumazet authored
Make sure sysctl_tcp_cookie_size is read once in tcp_cookie_size_check(), or we might return an illegal value to caller if sysctl_tcp_cookie_size is changed by another cpu. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: William Allen Simpson <william.allen.simpson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-