- 02 Sep, 2018 3 commits
-
-
David S. Miller authored
Ioana Radulescu says: ==================== dpaa2-eth: Move DPAA2 Ethernet driver The Freescale/NXP DPAA2 Ethernet driver was first included in drivers/staging, due to its dependencies on two components located there at the time of its initial submission: * the fsl-mc bus driver, which was moved to drivers/bus in kernel 4.17 * the dpio driver, which was moved to drivers/soc/fsl in kernel 4.18 More information on the DPAA2 architecture and the interactions between the fsl-mc bus and the objects present on it can be found in: Documentation/networking/dpaa2/overview.rst For easier review, the patch is generated without the -M option, although the driver files are moved without any code changes. changes since v1[1]: * remove RFC label, since dependencies have been merged on net-next * add patch fixing a possible race at probe (reported by Andrew Lunn) [1] https://lore.kernel.org/patchwork/patch/971333/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
The DPAA2 Ethernet driver supports Freescale/NXP SoCs with DPAA2 (DataPath Acceleration Architecture v2). The driver manages network objects discovered on the fsl-mc bus. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Ioana Radulescu authored
Only call netdev_register() at the end of the probe function, once all other necessary bits and pieces are properly initialized. We keep the rest of the netdevice initialization code in place, at the earlier point of the probing sequence, including the settings previously done in ndo_init. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 01 Sep, 2018 9 commits
-
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Marek Behún authored
On some boards the interrupt can be shared between multiple devices. For example on Turris Mox the interrupt is shared between all switches. Signed-off-by:
Marek Behun <marek.behun@nic.cz> Signed-off-by:
-
David Ahern authored
nl_net is set on entry to ip6_route_info_create. Only devices within that namespace are considered so no need to reset it before returning. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Make IPv4 consistent with IPv6 and return an extack message that the ONLINK flag requires a nexthop device. Signed-off-by:
-
Yuchung Cheng authored
Currently a Linux IPv6 TCP sender will change the flow label upon timeouts to potentially steer away from a data path that has gone bad. However this does not help if the problem is on the ACK path and the data path is healthy. In this case the receiver is likely to receive repeated spurious retransmission because the sender couldn't get the ACKs in time and has recurring timeouts. This patch adds another feature to mitigate this problem. It leverages the DSACK states in the receiver to change the flow label of the ACKs to speculatively re-route the ACK packets. In order to allow triggering on the second consecutive spurious RTO, the receiver changes the flow label upon sending a second consecutive DSACK for a sequence number below RCV.NXT. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Cong Wang authored
According to the new locking rule, we have to take tcf_lock for both ->init() and ->dump(), as RTNL will be removed. However, it is missing for act_connmark. Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Michael Walle authored
Provide a software TX timestamp as well as the ethtool query interface and report the software timestamp capabilities. Tested with "ethtool -T" and two linuxptp instances each bound to a tunnel endpoint. Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
Cong Wang authored
This reverts commit 331a9295 ("net: sched: act: add extack for lookup callback"). This extack is never used after 6 months... In fact, it can be just set in the caller, right after ->lookup(). Cc: Alexander Aring <aring@mojatatu.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-09-01 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP zero-copy support for i40e driver (!), from Björn and Magnus. 2) BPF verifier improvements by giving each register its own liveness chain which allows to simplify and getting rid of skip_callee() logic, from Edward. 3) Add bpf fs pretty print support for percpu arraymap, percpu hashmap and percpu lru hashmap. Also add generic percpu formatted print on bpftool so the same can be dumped there, from Yonghong. 4) Add bpf_{set,get}sockopt() helper support for TCP_SAVE_SYN and TCP_SAVED_SYN options to allow reflection of tos/tclass from received SYN packet, from Nikita. 5) Misc improvements to the BPF sockmap test cases in terms of cgroup v2 interaction and removal of incorrect shutdown() calls, from John. 6) Few cleanups in xdp_umem_assign_dev() and xdpsock samples, from Prashant. ==================== Signed-off-by:
-
- 31 Aug, 2018 9 commits
-
-
Magnus Karlsson authored
This commit gets rid of the structure xdp_umem_props. It was there to be able to break a dependency at one point, but this is no longer needed. The values in the struct are instead stored directly in the xdp_umem structure. This simplifies the xsk code as well as af_xdp zero-copy drivers and as a bonus gets rid of one internal header file. The i40e driver is also adapted to the new interface in this commit. Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Magnus Karlsson authored
With certain gcc versions, it was possible to get the warning "'tx_desc' may be used uninitialized in this function" for the i40e_xmit_zc. This was not possible, however this commit simplifies the code path so that this warning is no longer emitted. Signed-off-by:
-
Nikita V. Shirokov authored
adding selftest for feature, introduced in commit 9452048c79404 ("bpf: add TCP_SAVE_SYN/TCP_SAVED_SYN options for bpf_(set|get)sockopt"). Signed-off-by:Nikita V. Shirokov <tehnerd@fb.com> Signed-off-by:
-
Prashant Bhole authored
- xsks_map size was fixed to 4, changed it MAX_SOCKS - Remove redundant definition of MAX_SOCKS in xdpsock_user.c - In dump_stats(), add NULL check for xsks[i] Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
Prashant Bhole authored
Since xdp_umem_query() was added one assignment of bpf.command was missed from cleanup. Removing the assignment statement. Fixes: 84c6b868 ("xsk: don't allow umem replace at stack level") Signed-off-by:
-
Nikita V. Shirokov authored
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example: bpf program which is doing TOS/TCLASS reflection (server would reply with a same TOS/TCLASS as client). Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Nikita V. Shirokov authored
Adding support for two new bpf get/set sockopts: TCP_SAVE_SYN (set) and TCP_SAVED_SYN (get). This would allow for bpf program to build logic based on data from ingress SYN packet (e.g. doing tcp's tos/ tclass reflection (see sample prog)) and do it transparently from userspace program point of view. Signed-off-by:
-
Colin Ian King authored
Variable 'headroom' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: variable ‘headroom’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-08-30 This series contains updates to i40e, i40evf and virtchnl. Jake implements helper functions to use an array to handle the queue stats which reduces the boiler plate code as well as keep the complexity localized to a few functions. Paweł adds the ability to change a VF's MAC address from the host side without having to reload the VF driver on the guest side. Paul adds a check to ensure that the number of queues that the PF sends to the VF is equal to or less than the maximum number of queues the VF can support. Mitch fixes an issue caught by GCC 8, where we need to not include the terminating null in the length of the string for strncpy(). Lihong fixes a VF issue to ensure that it does not enter into promiscuous mode when macvlan is added to the VF. Fixed a potential crash after a VF is removed, since the workqueue sync for the adminq task was not being cancelled. Harshitha fixes the type for field_flags in the virtchnl_filter struct. Martyna removes an unnecessary check in a conditional if statement. Björn fixes an issue reported by Jesper Dangaard Brouer, where the driver was reporting incorrect statistics when XDP was enabled. Jan fixes the potential reporting of incorrect speed settings. Patryk fixed an issue where the flag I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING was getting set when any offload is set via ethtool. Resolved by only setting this flag when VLAN offload is enabled. Also ensure we hold the rtnl lock when we are clearing the interrupt scheme. Added a check when deleting the MAC address from the VF to ensure that the MAC address was not set by the PF and if it was, do not delete it. v2: updated patch 2 in the series based on community feedback from David Miller to inline a function ==================== Signed-off-by:
-
- 30 Aug, 2018 19 commits
-
-
Patryk Małek authored
To prevent VF from deleting MAC address that was assigned by the PF we need to check for that scenario when we try to delete a MAC address from a VF. Signed-off-by:
Patryk Małek <patryk.malek@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Lihong Yang authored
If a VF is being removed, there is no need to continue with the workqueue sync for the adminq task, thus cancel it. Without this call, when VFs are created and removed right away, there might be a chance for the driver to crash with events stuck in the adminq. Signed-off-by:
Lihong Yang <lihong.yang@intel.com> Tested-by:
-
Patryk Małek authored
Hold the rtnl lock when we're clearing interrupt scheme in i40e_shutdown and in i40e_remove. Signed-off-by:
-
Patryk Małek authored
With current implementation of i40evf_set_features when user sets any offload via ethtool we set I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING as a required aq which triggers driver to call i40evf_enable_vlan_stripping. This shouldn't take place. This patches fixes it by setting the flag only when VLAN offload is turned on. Signed-off-by:
-
Jan Sokolowski authored
If our card has been put in an unstable state due to other drivers interacting with it, speed settings might be incorrect. If incorrect, forcefully reset them on open to known default values. Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Tested-by:
-
Björn Töpel authored
When XDP is enabled, the driver will report incorrect statistics. Received frames will reported as transmitted frames. This commits fixes the i40e implementation of ndo_get_stats64 (struct net_device_ops), so that iproute2 will report correct statistics (e.g. when running "ip -stats link show dev eth0") even when XDP is enabled. Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Fixes: 74608d17 ("i40e: add support for XDP_TX action") Signed-off-by:
-
Martyna Szapar authored
Static analysis tools report a problem from original driver submission. Removing unnecessary check in condition. Signed-off-by:
Martyna Szapar <martyna.szapar@intel.com> Tested-by:
-
Harshitha Ramamurthy authored
The virtchnl_filter struct has a field called field_flags. A previous commit mistakenly had the type to be a __u8. What we want is for the field to be an unsigned 8 bit value, so let's just use the existing kernel type u8 for that. Signed-off-by:
Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by:
-
Lihong Yang authored
Set IFF_UNICAST_FLT flag for the VF to prevent it from entering promiscuous mode when macvlan is added to the VF. Signed-off-by:
-
Mitch Williams authored
Caught by GCC 8. When we provide a length for strncpy, we should not include the terminating null. So we must tell it one less than the size of the destination buffer. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Paul M Stillwell Jr authored
A PF can send any number of queues to the VF and the VF may not be able to support that many. Check to see that the number of queues is less than or equal to the max number of queues the VF can have. Signed-off-by:
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by:
-
Paweł Jabłoński authored
Add possibility to change a VF mac address from host side without reloading the VF driver on the guest side. Without this patch it is not possible to change the VF mac because executing i40evf_virtchnl_completion function with VIRTCHNL_OP_GET_VF_RESOURCES opcode resets the VF mac address to previous value. Signed-off-by:
Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by:
-
Jacob Keller authored
Fix a bug in the way we handled VF queues, by always showing stats for the maximum number of queues, even if they aren't allocated. It is not safe to change the number of strings reported to ethtool, as grabbing statistics occurs over multiple ethtool ops for which the rtnl_lock() cannot be held the entire time. Avoid this by always reporting queue stats for the maximum number of queues in the netdevice. Share some of the helper functionality for adding stats with the PF code in i40e_ethtool_stats.h This should reduce the chance of potential future bugs, and make adding new statistics easier. Note for the queue stats, unlike the PF driver we do not keep an array of queue pointers, but an array of queues, so care must be taken to avoid accessing queue memory that hasn't yet been allocated. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
Move the boiler plate structures and helper functions we recently added into their own header file, so that the complete collection is located together. Signed-off-by:
-
Jacob Keller authored
Use an i40e_stats array to handle the queue stats, instead of coding similar functionality separately. Because of how the queue stats are accessed on some kernels, we can't easily use i40e_add_ethtool_stats. Instead, implement a separate helper, i40e_add_queue_stats, which we'll use instead. This helper will correctly implement the u64_stats_fetch_begin_irq logic and allow retries until successful. We share the most complex code by re-using i40e_add_one_ethtool_stat. This logic additionally easily supports skipping disabled rings by using a ternary operator before calling the u64_stats_fetch_begin_irq() function, so that we correctly zero-out the stats values without having to perform two separate sections of code. This significantly reduces the boiler plate code in i40e_get_ethtool_stats, and helps keep the complex logic contained to as few functions as possible. With this patch, we've finally converted all the statistics to use the helpers and the i40e_stats function. Signed-off-by:
-
Björn Töpel authored
Previously, the AF_XDP (XDP_DRV/XDP_SKB copy-mode) ingress logic did not include XDP meta data in the data buffers copied out to the user application. In this commit, we check if meta data is available, and if so, it is prepended to the frame. Signed-off-by:
-
Daniel Borkmann authored
Yonghong Song says: ==================== Commit a26ca7c9 ("bpf: btf: Add pretty print support to the basic arraymap") and Commit 699c86d6 ("bpf: btf: add pretty print for hash/lru_hash maps") added bpffs pretty print for array, hash and lru hash maps. The pretty print gives users a structurally formatted dump for keys/values which much easy to understand than raw bytes. This patch set implemented bpffs pretty print support for percpu arraymap, percpu hashmap and percpu lru hashmap. For complex key/value types, the pretty print here is even more useful due to: . large volumne of data making it even harder to correlate bytes to a particular field in a particular cpu. . kernel rounds the value size for each cpu to multiple of 8. User has to be aware of this otherwise wrong value may be derived from cpu 1/2/... For example, we may have a bpffs pretty print like below: 43602: { cpu0: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO} cpu1: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO} cpu2: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO} cpu3: {43602,0,-43602,0x3,0xaa52,0x3,{43602|[82,170,0,0,0,0,0,0]},ENUM_TWO} } for a percpu map. This patch also added percpu formatted print on bpftool. For example, bpftool may print like below: { "key": 0, "values": [{ "cpu": 0, "value": { "ui32": 0, "ui16": 0, } },{ "cpu": 1, "value": { "ui32": 1, "ui16": 0, } },{ "cpu": 2, "value": { "ui32": 2, "ui16": 0, } },{ "cpu": 3, "value": { "ui32": 3, "ui16": 0, } } ] } Patch #1 implemented bpffs pretty print for percpu arraymap/hash/lru_hash in kernel. Patch #2 added the test case in tools bpf selftest test_btf. Patch #3 added percpu map btf based dump. ==================== Signed-off-by:
-
Yonghong Song authored
The btf pretty print is added to percpu arraymap, percpu hashmap and percpu lru hashmap. For each <key, value> pair, the following will be added to plain/json output: { "key": <pretty_print_key>, "values": [{ "cpu": 0, "value": <pretty_print_value_on_cpu0> },{ "cpu": 1, "value": <pretty_print_value_on_cpu1> },{ .... },{ "cpu": n, "value": <pretty_print_value_on_cpun> } ] } For example, the following could be part of plain or json formatted output: { "key": 0, "values": [{ "cpu": 0, "value": { "ui32": 0, "ui16": 0, } },{ "cpu": 1, "value": { "ui32": 1, "ui16": 0, } },{ "cpu": 2, "value": { "ui32": 2, "ui16": 0, } },{ "cpu": 3, "value": { "ui32": 3, "ui16": 0, } } ] } Signed-off-by:Yonghong Song <yhs@fb.com> Signed-off-by:
-
Yonghong Song authored
The bpf selftest test_btf is extended to test bpffs percpu map pretty print for percpu array, percpu hash and percpu lru hash. Signed-off-by:
-
