- 02 Sep, 2019 2 commits
-
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Changes since v2: Don't invalidate physical address before unregistering the notifier. Signed-off-by:
Dariusz Marcinkiewicz <darekm@google.com> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-7-darekm@google.com
-
Cheng-Yi Chiang authored
In the designware databook, the sequence of enabling audio clock and setting format is not clearly specified. Currently, audio clock is enabled in the end of hw_param ops after setting format. On some monitors, there is a possibility that audio does not come out. Fix this by enabling audio clock in audio_startup ops before hw_param ops setting format. Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190902035435.44463-1-cychiang@chromium.org
-
- 29 Aug, 2019 2 commits
-
-
Sean Paul authored
Spec says[1] Allocated_PBN is 16 bits [1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98 Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Lyude Paul <lyude@redhat.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
-
Laurent Pinchart authored
The ingenic driver supports DPI panels only at the moment, so hardcode their type to DPI instead of Unknown. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190823212353.29369-1-laurent.pinchart@ideasonboard.com # *** extracted tags *** Reviewed-by:
Sam Ravnborg <sam@ravnborg.org>
-
- 28 Aug, 2019 8 commits
-
-
Boris Brezillon authored
This is part of our attempt to make the bridge chain a double-linked list based on the generic list helpers. In order to do that, we must patch all drivers manipulating the encoder->bridge field directly. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-9-boris.brezillon@collabora.com
-
Boris Brezillon authored
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by:
-
Neil Armstrong authored
Add the suspend and resume hooks to: - save and disable the entire DRM driver on suspend - re-init the entire VPU subsystem on resume, to recover CRTC and pixel generator functionnal usage after DDR suspend, then recover DRM driver state Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-3-narmstrong@baylibre.com
-
Neil Armstrong authored
Add the suspend and resume hooks to: - reset the whole HDMI glue and HDMI controller on suspend - re-init the HDMI glue and HDMI controller on resume The HDMI glue init is refactored to be re-used from the resume hook. It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus. Signed-off-by:
-
Stephen Rothwell authored
Fixes: 3e93bc2a ("drm/virtio: make resource id workaround runtime switchable.") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: http://patchwork.freedesktop.org/patch/msgid/20190828185516.22b03da8@canb.auug.org.auSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
Split virtqueue_kick() call into virtqueue_kick_prepare(), which requires serialization, and virtqueue_notify(), which does not. Move the virtqueue_notify() call out of the critical section protected by the queue lock. This avoids triggering a vmexit while holding the lock and thereby fixes a rather bad spinlock contention. Suggested-by:
Chia-I Wu <olvaffe@gmail.com> Signed-off-by:
-
Gerd Hoffmann authored
Make the queue functions return void, none of the call sites checks the return value. Signed-off-by:
-
Gerd Hoffmann authored
Use drm_atomic_helper_check_plane_state() to sanity check the plane state. Signed-off-by:
-
- 27 Aug, 2019 4 commits
-
-
Dariusz Marcinkiewicz authored
Fill in the connector info, allowing userspace to associate the CEC device with the drm connector. Tested on a Raspberry Pi 3B. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Dariusz Marcinkiewicz authored
Pass the connector info to the CEC adapter. This makes it possible to associate the CEC adapter with the corresponding drm connector. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Gerd Hoffmann authored
Also update the comment with a reference to the virglrenderer fix. Signed-off-by:
-
- 26 Aug, 2019 2 commits
-
-
Christophe JAILLET authored
If we don't find any matching components, we should go through the error handling path, in order to free some resources. Fixes: ca5be902 ("drm/mcde: Fix uninitialized variable") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190822211518.5578-1-christophe.jaillet@wanadoo.fr
-
Dan Carpenter authored
This code will likely crash if we try to do a zero byte write. The code looks like this: /* strip trailing whitespace */ for (i = count - 1; i > 0; i--) if (isspace(buf[i])) ... We're writing zero bytes so count = 0. You would think that "count - 1" would be negative one, but because "i" is unsigned it is a large positive numer instead. The "i > 0" condition is true and the "buf[i]" access will be out of bounds. The fix is to make "i" signed and now everything works as expected. The upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so we don't have to worry about it being higher than INT_MAX. Fixes: 02dd95fe ("drm/tinydrm: Add MIPI DBI support") Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> [noralf: Adjust title] Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda
-
- 24 Aug, 2019 2 commits
-
-
Laurent Pinchart authored
Instead of requiring all drivers to set the dev and funcs fields of drm_panel manually after calling drm_panel_init(), pass the data as arguments to the function. This simplifies the panel drivers, and will help future refactoring when adding new arguments to drm_panel_init(). The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection to verify that no call to drm_panel_init() with a single argument still exists. @@ expression panel; expression device; identifier ops; @@ drm_panel_init(&panel + , device, &ops ); ... ( -panel.dev = device; -panel.funcs = &ops; | -panel.funcs = &ops; -panel.dev = device; ) Suggested-by:
-
Laurent Pinchart authored
Panels must be initialised with drm_panel_init(). Add the missing function call in the panel-raspberrypi-touchscreen.c and panel-sitronix-st7789v.c drivers. Signed-off-by:
-
- 23 Aug, 2019 13 commits
-
-
Alyssa Rosenzweig authored
While newer kbase include only the numbers of errata, older kbase releases included one-line descriptions for each errata, which is useful for those working on the driver. Import these descriptions. Most are from kbase verbatim; a few I edited for clarity. v2: Wrote a description for the workaround of an issue whose cause is still unknown (Stephen). Errata which pertain to newer models unsupported by the mainline driver, for which Arm has not yet released errata information, have been removed from the issue list as the kernel need not concern itself with these. v3: Readded errata not yet handled, adding descriptions based on the workarounds in the latest kbase release. Signed-off-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190823155149.7272-1-alyssa.rosenzweig@collabora.com
-
Rob Herring authored
Lockdep reports a circular locking dependency with pages_lock taken in the shrinker callback. The deadlock can't actually happen with current users at least as a BO will never be purgeable when pages_lock is held. To be safe, let's use mutex_trylock() instead and bail if a BO is locked already. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Steven Price <steven.price@arm.com> Acked-by:
-
Rob Herring authored
Lockdep reports a circular locking dependency with pages_lock taken in the shrinker callback. The deadlock can't actually happen with current users at least as a BO will never be purgeable when pages_lock is held. To be safe, let's use mutex_trylock() instead and bail if a BO is locked already. WARNING: possible circular locking dependency detected 5.3.0-rc1+ #100 Tainted: G L ------------------------------------------------------ kswapd0/171 is trying to acquire lock: 000000009b9823fd (&shmem->pages_lock){+.+.}, at: drm_gem_shmem_purge+0x20/0x40 but task is already holding lock: 00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.18+0x34/0x40 fs_reclaim_acquire+0x20/0x28 __kmalloc_node+0x6c/0x4c0 kvmalloc_node+0x38/0xa8 drm_gem_get_pages+0x80/0x1d0 drm_gem_shmem_get_pages+0x58/0xa0 drm_gem_shmem_get_pages_sgt+0x48/0xd0 panfrost_mmu_map+0x38/0xf8 [panfrost] panfrost_gem_open+0xc0/0xe8 [panfrost] drm_gem_handle_create_tail+0xe8/0x198 drm_gem_handle_create+0x3c/0x50 panfrost_gem_create_with_handle+0x70/0xa0 [panfrost] panfrost_ioctl_create_bo+0x48/0x80 [panfrost] drm_ioctl_kernel+0xb8/0x110 drm_ioctl+0x244/0x3f0 do_vfs_ioctl+0xbc/0x910 ksys_ioctl+0x78/0xa8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x90/0x168 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc -> #0 (&shmem->pages_lock){+.+.}: __lock_acquire+0xa2c/0x1d70 lock_acquire+0xdc/0x228 __mutex_lock+0x8c/0x800 mutex_lock_nested+0x1c/0x28 drm_gem_shmem_purge+0x20/0x40 panfrost_gem_shrinker_scan+0xc0/0x180 [panfrost] do_shrink_slab+0x208/0x500 shrink_slab+0x10c/0x2c0 shrink_node+0x28c/0x4d8 balance_pgdat+0x2c8/0x570 kswapd+0x22c/0x638 kthread+0x128/0x130 ret_from_fork+0x10/0x18 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&shmem->pages_lock); lock(fs_reclaim); lock(&shmem->pages_lock); *** DEADLOCK *** 3 locks held by kswapd0/171: #0: 00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40 #1: 00000000ceb37808 (shrinker_rwsem){++++}, at: shrink_slab+0xbc/0x2c0 #2: 00000000f31efa81 (&pfdev->shrinker_lock){+.+.}, at: panfrost_gem_shrinker_scan+0x34/0x180 [panfrost] Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: -
Rob Herring authored
Calling dma_unmap_sg() in drm_gem_shmem_free_object() is too late if the backing pages have already been released by the shrinker. The result is the following abort: Unable to handle kernel paging request at virtual address ffff8000098ed000 Mem abort info: ESR = 0x96000147 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000147 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000002f51000 [ffff8000098ed000] pgd=00000000401f8003, pud=00000000401f7003, pmd=00000000401b1003, pte=00e80000098ed712 Internal error: Oops: 96000147 [#1] SMP Modules linked in: panfrost gpu_sched CPU: 5 PID: 902 Comm: gnome-shell Not tainted 5.3.0-rc1+ #95 Hardware name: 96boards Rock960 (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : __dma_inv_area+0x40/0x58 lr : arch_sync_dma_for_cpu+0x28/0x30 sp : ffff00001321ba30 x29: ffff00001321ba30 x28: ffff00001321bd08 x27: 0000000000000000 x26: 0000000000000009 x25: 0000ffffc1f86170 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000021000 x20: ffff80003bb2d810 x19: 00000000098ed000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800023fd9480 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 00000000fffb9fff x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800023fd9c18 x7 : 0000000000000000 x6 : 00000000ffffffff x5 : 0000000000000000 x4 : 0000000000021000 Purging 5693440 bytes x3 : 000000000000003f x2 : 0000000000000040 x1 : ffff80000990e000 x0 : ffff8000098ed000 Call trace: __dma_inv_area+0x40/0x58 dma_direct_sync_single_for_cpu+0x7c/0x80 dma_direct_unmap_page+0x80/0x88 dma_direct_unmap_sg+0x54/0x80 drm_gem_shmem_free_object+0xfc/0x108 panfrost_gem_free_object+0x118/0x128 [panfrost] drm_gem_object_free+0x18/0x90 drm_gem_object_put_unlocked+0x58/0x80 drm_gem_object_handle_put_unlocked+0x64/0xb0 drm_gem_object_release_handle+0x70/0x98 drm_gem_handle_delete+0x64/0xb0 drm_gem_close_ioctl+0x28/0x38 drm_ioctl_kernel+0xb8/0x110 drm_ioctl+0x244/0x3f0 do_vfs_ioctl+0xbc/0x910 ksys_ioctl+0x78/0xa8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x88/0x150 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Code: 8a230000 54000060 d50b7e20 14000002 (d5087620) Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Rob Herring authored
Calls to panfrost_device_fini() access the h/w, but we already done a pm_runtime_put_sync_autosuspend() beforehand. This only works if the autosuspend delay is long enough. A 0ms delay will hang the system when removing the device. Fix this by moving the pm_runtime_put_sync_suspend() after the panfrost_device_fini() call. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Rob Herring authored
Add Steven Price and Alyssa Rosenzweig as reviewers as they have been the primary reviewers already. Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by:
-
Steven Price authored
When modifying panfrost_devfreq_target() to support a device without a regulator defined I missed the check on the error path. Let's add it. Reported-by:
-
Gerd Hoffmann authored
No need for a home-grown version, the generic helper should work just fine. It also handles vgacon removal these days, see commit 1c74ca7a ("drm/fb-helper: call vga_remove_vgacon automatically."), so that can be removed too. Signed-off-by:
-
Gerd Hoffmann authored
Not needed any more for remove_conflicting_pci_framebuffers calls. Signed-off-by:
-
Gerd Hoffmann authored
Since commit b0e999c9 ("fbdev: list all pci memory bars as conflicting apertures") the parameter was used for some sanity checks only, to make sure we detect any issues with the new approach to just list all memory bars as apertures. No issues turned up so far, so continue to cleanup: Drop the res_id parameter, drop the sanity checks. Also downgrade the logging from "info" level to "debug" level and update documentation. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613115749.GC26335@kroah.comReviewed-by:
-
Jean-Jacques Hiblot authored
Add the following properties for planes: * alpha * pixel blend mode. Only "Pre-multiplied" and "Coverage" are supported Signed-off-by:
Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by:
-
Rob Herring authored
We can't hold the mm_lock spinlock as panfrost_mmu_map() can sleep: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 in_atomic(): 1, irqs_disabled(): 0, pid: 974, name: glmark2-es2-drm 1 lock held by glmark2-es2-drm/974: CPU: 5 PID: 974 Comm: glmark2-es2-drm Tainted: G W L 5.3.0-rc1+ #94 Hardware name: 96boards Rock960 (DT) Call trace: dump_backtrace+0x0/0x130 show_stack+0x14/0x20 dump_stack+0xc4/0x10c ___might_sleep+0x158/0x228 __might_sleep+0x50/0x88 __mutex_lock+0x58/0x800 mutex_lock_interruptible_nested+0x1c/0x28 drm_gem_shmem_get_pages+0x24/0xa0 drm_gem_shmem_get_pages_sgt+0x48/0xd0 panfrost_mmu_map+0x38/0xf8 [panfrost] panfrost_gem_open+0xc0/0xd8 [panfrost] drm_gem_handle_create_tail+0xe8/0x198 drm_gem_handle_create+0x3c/0x50 panfrost_gem_create_with_handle+0x70/0xa0 [panfrost] panfrost_ioctl_create_bo+0x48/0x80 [panfrost] drm_ioctl_kernel+0xb8/0x110 drm_ioctl+0x244/0x3f0 do_vfs_ioctl+0xbc/0x910 ksys_ioctl+0x78/0xa8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x90/0x168 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Fixes: a5efb4c9 ("drm/panfrost: Restructure the GEM object creation") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
- 22 Aug, 2019 2 commits
-
-
Julien Masson authored
This patch introduce new enum which contains all VPU family (GXBB, GXL, GXM and G12A). This enum is used to detect the VPU compatible with the device. We only need to set .data to the corresponding enum in the device table, no need to check .compatible string anymore. Signed-off-by:
Julien Masson <jmasson@baylibre.com> Tested-by:
-
Jani Nikula authored
The module is drm_kms_helper, not drm_kms_firmware. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204549Reported-by:
Göran Uddeborg <goeran@uddeborg.se> Fixes: ac6c35a4 ("drm: add backwards compatibility support for drm_kms_helper.edid_firmware") Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821094312.5514-1-jani.nikula@intel.com
-
- 21 Aug, 2019 5 commits
-
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch renames ade_data to kirin_drm_private, and moves crtc_init and plane_init to kirin drm drv too. Now that they are generic the functions can be shared between the kirin620 and (to be added later) kirin960 specific support code. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by:
Xu YiPing <xuyiping@hisilicon.com> [jstultz: Reworded commit message] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the code via a passed in driver_data pointer, rather than hardcoding them via ade_driver_data variable. This will allow those funcitons to be later moved to the generic kirin_drm_drv.c using alternative driver_data structures that support other hardware. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the alloc/clean_hw_ctx functions to be called via driver_data specific funciton pointers. This will allow the ade_drm_init to later be made generic and moved to kirin_drm_drv.c Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the driver_data value to not be a global variable. Instead the driver_data value is accessed via the of_device_get_match_data() when needed. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the dev->driver_data to point to a drm_device, not ade_data. Thus we set the driver data to drm device after alloc. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
