- 03 Aug, 2024 40 commits
-
-
Nuno Sa authored
Add support for configuring the prbs23 sequence. Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-4-4cb62852f0d0@analog.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Nuno Sa authored
Support ADI specific prb23 sequence that can be used both for calibrating or debugging digital interfaces. Signed-off-by:
-
Nuno Sa authored
This adds a basic debugfs interface for backends. Two new ops are being added: * debugfs_reg_access: Analogous to the core IIO one but for backend devices. * debugfs_print_chan_status: One useful usecase for this one is for testing test tones in a digital interface and "ask" the backend to dump more details on why a test tone might have errors. Signed-off-by:
-
Nuno Sa authored
Instead of only passing the backend ops when calling devm_iio_backend_register(), pass an info like structure that will contains the ops and additional information. Fow now, the backend name is being added as that will be used by the debugFS interface introduced in a later patch. It also opens the door for further customizations passed by backends. All users of devm_iio_backend_register() were updated accordingly. Signed-off-by:
-
Rob Herring (Arm) authored
Use of_property_present() to test for property presence rather than of_find_property(). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Acked-by:
Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://patch.msgid.link/20240731191312.1710417-5-robh@kernel.orgSigned-off-by:
-
Javier Carrasco authored
Drop the manual access to the fwnode of the device to iterate over its child nodes. `device_for_each_child_node` macro provides direct access to the child nodes, and given that they are only required within the loop, the scoped variant of the macro can be used. Use the `device_for_each_child_node_scoped` macro to iterate over the direct child nodes of the device. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by:
-
Julien Stephan authored
The AD7380 family has some compatible single-ended chips: AD7386/7/8(-4). These single-ended chips have a 2:1 multiplexer in front of each ADC. They also include additional configuration registers that allow for either manual selection or automatic switching (sequencer mode), of the multiplexer inputs. Add a section to describe this. Signed-off-by:
Julien Stephan <jstephan@baylibre.com> Reviewed-by:
David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-7-cd63bf05744c@baylibre.comSigned-off-by:
-
Julien Stephan authored
ad7386/7/8(-4) single-ended parts have a 2:1 mux in front of each ADC. >From an IIO point of view, all inputs are exported, i.e ad7386/7/8 export 4 channels and ad7386-4/7-4/8-4 export 8 channels. First inputs of muxes correspond to the first half of IIO channels (i.e 0-1 or 0-3) and second inputs correspond to second half (i.e 2-3 or 4-7) Currently, the driver supports only sampling first half OR second half of the IIO channels. To enable sampling all channels simultaneously, these parts have an internal sequencer that automatically cycles through the mux entries. When enabled, the maximum throughput is divided by two. Moreover, the ADCs need additional settling time, so we add an extra CS toggle to correctly propagate setting, and an additional spi transfer to read the second half. Signed-off-by:
-
Julien Stephan authored
Adding ad7386/7/8 (16/14/12 bits) unsigned, dual simultaneous sampling, single-ended compatible parts, and the corresponding ad7386-4/7-4/8-4 4 channels. These parts have a 2:1 multiplexer in front of each ADC. They also include additional configuration registers that allow for either manual selection or automatic switching (sequencer mode), of the multiplexer inputs. This commit focus on integrating manual selection. Sequencer mode will be implemented later. >From an IIO point of view, all inputs are exported, i.e ad7386/7/8 export 4 channels and ad7386-4/7-4/8-4 export 8 channels. Inputs AinX0 of multiplexers correspond to the first half of IIO channels (i.e 0-1 or 0-3) and inputs AinX1 correspond to second half (i.e 2-3 or 4-7). Example for AD7386/7/8 (2 channels parts): IIO | AD7386/7/8 | +---------------------------- | | _____ ______ | | | | | | voltage0 | AinA0 --|--->| | | | | | | mux |----->| ADCA |--- voltage2 | AinA1 --|--->| | | | | | |_____| |_____ | | | _____ ______ | | | | | | voltage1 | AinB0 --|--->| | | | | | | mux |----->| ADCB |--- voltage3 | AinB1 --|--->| | | | | | |_____| |______| | | | +---------------------------- When switching channel, the ADC require an additional settling time. According to the datasheet, data is valid on the third CS low. We already have an extra toggle before each read (either direct reads or buffered reads) to sample correct data, so we just add a single CS toggle at the end of the register write. Signed-off-by: -
Julien Stephan authored
ad738x family contains single-ended parts that have a 2:1 mux in front of ADC, so the number of IIO channels is different from the number of simultaneous channels that can be sampled. To prepare the support for single-ended parts, introduce a new num_simultaneous_channels variable. For currently supported parts, num_simultaneous_channels is equal to num_channels minus 1 (the timestamps channel) Signed-off-by:
-
Julien Stephan authored
Add missing trailing commas in iio_scan_type structures Signed-off-by:
-
Julien Stephan authored
Add a function to retrieve the index of the active scan mask inside the available scan masks array. As in iio_scan_mask_match and iio_sanity_check_avail_scan_masks, this function does not handle multi-long masks correctly. It only checks the first long to be zero, and will use such mask as a terminator even if there was bits set after the first long. This should be fine since the available_scan_mask has already been sanity tested using iio_sanity_check_avail_scan_masks. See iio_scan_mask_match and iio_sanity_check_avail_scan_masks for more details Signed-off-by:
-
Julien Stephan authored
Adding ad7386/7/8 single-ended compatible parts, and the corresponding ad7386-4/7-4/8-4 4 channels. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Marcelo Schmitt authored
Reviewed-by:
Marcelo Schmitt <marcelo.schmitt@analog.com> Reviewed-by:
-
Marcelo Schmitt authored
Add support for AD4000 series of low noise, low power, high speed, successive approximation register (SAR) ADCs. Reviewed-by:
-
Jonathan Cameron authored
spi: Support MOSI idle configuration Add support for configuring the idle state of the MOSI signal in controllers.
-
Antoniu Miclaus authored
Add separate handling for adf4378 within the driver. The main difference between adf4377 and adf4378 is that adf4378 has only one output which is handled by only one gpio. Signed-off-by:
Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://patch.msgid.link/20240729095047.25040-3-antoniu.miclaus@analog.comSigned-off-by:
-
Antoniu Miclaus authored
The adf4378 provides only one output channel. Therefore there is only one gpio available to enable the output. Reflect that into the bindings using property conditions. Add product link for the adf4378. Signed-off-by:
-
Kaustabh Chakraborty authored
STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite being marketed as a proximity sensor, it also appears to have ambient light sensing capabilities. The part is fully compatible with the existing implementation of the device driver. Add the compatible string of stk3013 to the existing list, with a fallback of stk3310. Signed-off-by:
Kaustabh Chakraborty <kauschluss@disroot.org> Acked-by:
-
Kaustabh Chakraborty authored
Add support for Sensortek's STK3013 in the driver. The part bears the product ID 0x31. As seen in [1], Sensortek lists STK3013 as a proximity sensor. But it has been experimentally observed that they do have ambient light sensing capabilities. Furthermore, [2] implements a proximity and ambient light sensor driver for STK3x1x devices, which is also indicative of the fact that these parts are also ambient light sensors. [1] https://www.sensortek.com.tw/index.php/en/products/optical-sensor/ [2] https://android.googlesource.com/kernel/msm.git/+/e6dfa4641d88201e8019be19ff557e5d2cf4572fSigned-off-by:
-
Kaustabh Chakraborty authored
In order to allow newer devices which are compatible with existing sensors, issuing a warning for an unknown chipid indicates that something has gone wrong with the init process, which isn't ideal. Swap it with a friendlier info message to get things right. Suggested-by:
Conor Dooley <conor@kernel.org> Signed-off-by:
-
David Lechner authored
Use devm_regulator_get_enable_read_voltage() to replace tsc2046_adc_configure_regulator() which does the same thing. Signed-off-by:
-
Petar Stoykov authored
Add myself as a maintainer for Sensirion SDP500 pressure sensor driver Signed-off-by:
Petar Stoykov <pd.pstoykov@gmail.com> Link: https://patch.msgid.link/20240725-mainline_sdp500-v4-3-ea2f5b189958@gmail.comSigned-off-by:
-
Petar Stoykov authored
Sensirion SDP500 is a digital differential pressure sensor. The sensor is accessed over I2C. Signed-off-by:
-
Petar Stoykov authored
Sensirion SDP500 is a digital differential pressure sensor. It provides a digital I2C output. Add devicetree bindings requiring the compatible string and I2C slave address (reg). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://patch.msgid.link/20240725-mainline_sdp500-v4-1-ea2f5b189958@gmail.comSigned-off-by:
-
Matteo Martelli authored
Add support for Microchip PAC1921 Power/Current monitor. Implemented features: * capture of bus voltage, sense voltage, current and power measurements in free-run integration mode * support for both raw and triggered buffer reading * support for overflow events * scale attributes to control voltage and current gains * oversampling ratio attribute to control the number of integration samples * sampling rate attribute that reflects the integration period * userspace attribute and DT parameter to control shunt resistor * simple power management support Limitations: * operation mode fixed to free-run integration * READ/INT pin and OUT pin not supported * no controls for measurement resolutions and filters Signed-off-by:
Matteo Martelli <matteomartelli3@gmail.com> Link: https://patch.msgid.link/20240724-iio-pac1921-v4-3-723698e903a3@gmail.comSigned-off-by:
-
Matteo Martelli authored
Add binging for Microchip PAC1921 Power/Current monitor Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Vasileios Amoiridis authored
By converting it to static, we ensure that this will be placed by the compiler in the read-only area. Signed-off-by:
Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240725231818.615530-1-vassilisamir@gmail.comSigned-off-by:
-
Nuno Sa authored
Avoid unnecessary pollution of the global symbol namespace and move global APIs into a specific namespace. Import that into the places that use them Signed-off-by:
-
David Lechner authored
This makes use of the new devm_regulator_get_enable_read_voltage() helper function to reduce boilerplate code in the MCP3564 ADC driver. The error message is slightly changed since there are fewer error return paths. Setting adc->vref_mv is consolidated into a single place to make the logic easier to follow. A use_internal_vref_attr local variable is added to make it more obvious what the difference between the two iio info structures is. The return value of the "Unknown Vref" dev_err_probe() is hard-coded to -ENODEV instead of ret since it was getting a bit far from where ret was set and logically that is the only value it could have. Signed-off-by:
Marius Cristea <marius.cristea@microchip.com> Link: https://patch.msgid.link/20240723-iio-regulator-refactor-round-3-v2-1-ae9291201785@baylibre.comSigned-off-by:
-
Nuno Sa authored
Now that all users are using the proper accessors, we can mark masklength as __private so that no one tries to write. We also get help from checkers in warning us in case someone does it. To access the private field from IIO core code, we need to use the ACCESS_PRIVATE() macro. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Make use of iio_get_masklength) and iio_for_each_active_channel() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Make use of iio_get_masklength) and iio_for_each_active_channel() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
