- 27 Jul, 2017 40 commits
-
-
Yoshihiro Shimoda authored
commit 59a0879a upstream. This patch fixes an issue that some registers may be not initialized after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise, if a cable is not connected, the driver will not enable INTENB0.VBSE after resume. And then, the driver cannot detect the VBUS. Fixes: ca8a282a ("usb: gadget: renesas_usbhs: add suspend/resume support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit fe855789 upstream. Add device-id entry for DATECS FP-2000 fiscal printer needing the NO_UNION_NORMAL quirk. Reported-by:
Anton Avramov <lukav@lukav.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Colin Ian King authored
commit 446230f5 upstream. When us->extra is null the driver is not initialized, however, a later call to osd200_scsi_to_ata is made that dereferences us->extra, causing a null pointer dereference. The code currently detects and reports that the driver is not initialized; add a return to avoid the subsequent dereference issue in this check. Thanks to Alan Stern for pointing out that srb->result needs setting to DID_ERROR << 16 Detected by CoverityScan, CID#100308 ("Dereference after null check") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Devin Heitmueller authored
commit d90b336f upstream. The recent changes in 4.9 to mandate USB buffers be heap allocated broke this driver, which was allocating the buffers on the stack. This resulted in the device failing at initialization. Introduce dedicated send/receive buffers as part of the state structure, and add a mutex to protect access to them. Note: we also had to tweak the API to mxl111sf_ctrl_msg to pass the pointer to the state struct rather than the device, since we need it inside the function to access the buffers and the mutex. This patch adjusts the callers to match the API change. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Reported-by:
Doug Lung <dlung0@gmail.com> Cc: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Jiahau Chang authored
commit 9da5a109 upstream. When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad performance was manifesting in Web browser use (like download large file such as ISO image). It is known limitation of ASM1042A that is not compatible with driver scheduling, As a workaround we can modify flow control handling of ASM1042A. The register we modify is changes the behavior [use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias] Signed-off-by:
Jiahau Chang <Lars_chang@asmedia.com.tw> Signed-off-by:
Ian Pilcher <arequipeno@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 4b895868 upstream. This off by one in stream_id indexing caused NULL pointer dereference and soft lockup on machines with USB attached SCSI devices connected to a hotpluggable xhci controller. The code that cleans up pending URBs for dead hosts tried to dereference a stream ring at the invalid stream_id 0. ep->stream_info->stream_rings[0] doesn't point to a ring. Start looping stream_id from 1 like in all the other places in the driver, and check that the ring exists before trying to kill URBs on it. Reported-by:
rocko r <rockorequin@gmail.com> Signed-off-by:
-
Mathias Nyman authored
commit a54408d0 upstream. A uncleared PLC (port link change) bit will prevent furuther port event interrupts for that port. Leaving it uncleared caused get_port_status() to timeout after 20000ms while waiting to get the final port event interrupt for resume -> U0 state change. This is a targeted fix for a specific case where we get a port resume event racing with xhci resume. The port event interrupt handler notices xHC is not yet running and bails out early, leaving PLC uncleared. The whole xhci port resuming needs more attention, but while working on it it anyways makes sense to always ensure PLC is cleared in get_port_status before setting a new link state and waiting for its completion. Signed-off-by:
-
Julian Anastasov authored
commit 3c5ab3f3 upstream. We do not check if packet from real server is for NAT connection before performing SNAT. This causes problems for setups that use DR/TUN and allow local clients to access the real server directly, for example: - local client in director creates IPVS-DR/TUN connection CIP->VIP and the request packets are routed to RIP. Talks are finished but IPVS connection is not expired yet. - second local client creates non-IPVS connection CIP->RIP with same reply tuple RIP->CIP and when replies are received on LOCAL_IN we wrongly assign them for the first client connection because RIP->CIP matches the reply direction. As result, IPVS SNATs replies for non-IPVS connections. The problem is more visible to local UDP clients but in rare cases it can happen also for TCP or remote clients when the real server sends the reply traffic via the director. So, better to be more precise for the reply traffic. As replies are not expected for DR/TUN connections, better to not touch them. Reported-by:
Nick Moriarty <nick.moriarty@york.ac.uk> Tested-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Chen Yu authored
commit e60514bd upstream. Currently we saw a lot of "No irq handler" errors during hibernation, which caused the system hang finally: ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) do_IRQ: 31.151 No irq handler for vector According to above logs, there is an interrupt triggered and it is dispatched to CPU31 with a vector number 151, but there is no handler for it, thus this IRQ will not get acked and will cause an IRQ flood which kills the system. To be more specific, the 31.151 is an interrupt from the AHCI host controller. After some investigation, the reason why this issue is triggered is because the thaw_noirq() function does not restore the MSI/MSI-X settings across hibernation. The scenario is illustrated below: 1. Before hibernation, IRQ 34 is the handler for the AHCI device, which is bound to CPU31. 2. Hibernation starts, the AHCI device is put into low power state. 3. All the nonboot CPUs are put offline, so IRQ 34 has to be migrated to the last alive one - CPU0. 4. After the snapshot has been created, all the nonboot CPUs are brought up again; IRQ 34 remains bound to CPU0. 5. AHCI devices are put into D0. 6. The snapshot is written to the disk. The issue is triggered in step 6. The AHCI interrupt should be delivered to CPU0, however it is delivered to the original CPU31 instead, which causes the "No irq handler" issue. Ying Huang has provided a clue that, in step 3 it is possible that writing to the register might not take effect as the PCI devices have been suspended. In step 3, the IRQ 34 affinity should be modified from CPU31 to CPU0, but in fact it is not. In __pci_write_msi_msg(), if the device is already in low power state, the low level MSI message entry will not be updated but cached. During the device restore process after a normal suspend/resume, pci_restore_msi_state() writes the cached MSI back to the hardware. But this is not the case for hibernation. pci_restore_msi_state() is not currently called in pci_pm_thaw_noirq(), although pci_save_state() has saved the necessary PCI cached information in pci_pm_freeze_noirq(). Restore the PCI status for the device during hibernation. Otherwise the status might be lost across hibernation (for example, settings for MSI, MSI-X, ATS, ACS, IOV, etc.), which might cause problems during hibernation. Suggested-by:
Ying Huang <ying.huang@intel.com> Suggested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
-
Shawn Lin authored
commit dc8cca5e upstream. Rockchip's RC has two banks of registers for the root port: a normal bank that is strictly compatible with the PCIe spec, and a privileged bank that can be used to change RO bits of root port registers. When probing the RC driver, we use the privileged bank to do some basic setup work as some RO bits are hw-inited to wrong value. But we didn't change to the normal bank after probing the driver. This leads to a serious problem when the PME code tries to clear the PME status by writing PCI_EXP_RTSTA_PME to the register of PCI_EXP_RTSTA. Per PCIe 3.0 spec, section 7.8.14, the PME status bit is RW1C. So the PME code is doing the right thing to clear the PME status but we find the RC doesn't clear it but actually setting it to one. So finally the system trap in pcie_pme_work_fn() as PCI_EXP_RTSTA_PME is true now forever. This issue can be reproduced by booting kernel with pci=nomsi. Use the normal register bank for the PCI config accessors. The privileged bank is used only internally by this driver. Fixes: e77f847d ("PCI: rockchip: Add Rockchip PCIe controller support") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 13cfc732 upstream. Neither soft poweroff (transition to ACPI power state S5) nor suspend-to-RAM (transition to state S3) works on the Macbook Pro 11,4 and 11,5. The problem is related to the [mem 0x7fa00000-0x7fbfffff] space. When we use that space, e.g., by assigning it to the 00:1c.0 Root Port, the ACPI Power Management 1 Control Register (PM1_CNT) at [io 0x1804] doesn't work anymore. Linux does a soft poweroff (transition to S5) by writing to PM1_CNT. The theory about why this doesn't work is: - The write to PM1_CNT causes an SMI - The BIOS SMI handler depends on something in [mem 0x7fa00000-0x7fbfffff] - When Linux assigns [mem 0x7fa00000-0x7fbfffff] to the 00:1c.0 Port, it covers up whatever the SMI handler uses, so the SMI handler no longer works correctly Reserve the [mem 0x7fa00000-0x7fbfffff] space so we don't assign it to anything. This is voodoo programming, since we don't know what the real conflict is, but we've failed to find the root cause. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=103211 Tested-by: thejoe@gmail.com Signed-off-by:
-
Herbert Xu authored
commit 096f41d3 upstream. The parsing of sadb_x_ipsecrequest is broken in a number of ways. First of all we're not verifying sadb_x_ipsecrequest_len. This is needed when the structure carries addresses at the end. Worse we don't even look at the length when we parse those optional addresses. The migration code had similar parsing code that's better but it also has some deficiencies. The length is overcounted first of all as it includes the header itself. It also fails to check the length before dereferencing the sa_family field. This patch fixes those problems in parse_sockaddr_pair and then uses it in parse_ipsecrequest. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit c6bb0b8d upstream. On radix, the process table entry we want to clear when destroying a context is entry 0, not entry 1. This has no *immediate* consequence on Power9, but it can cause other bugs to become worse. Fixes: 7e381c0f ("powerpc/mm/radix: Add mmu context handling callback for radix") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Oliver O'Halloran authored
commit 2400fd82 upstream. The workaround for the CELL timebase bug does not correctly mark cr0 as being clobbered. This means GCC doesn't know that the asm block changes cr0 and might leave the result of an unrelated comparison in cr0 across the block, which we then trash, leading to basically random behaviour. Fixes: 859deea9 ("[POWERPC] Cell timebase bug workaround") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> [mpe: Tweak change log and flag for stable] Signed-off-by:
-
Anton Blanchard authored
commit 64e756c5 upstream. From POWER4 onwards, mfocrf() only places the specified CR field into the destination GPR, and the rest of it is set to 0. The PowerPC AS from version 3.0 now requires this behaviour. The emulation code currently puts the entire CR into the destination GPR. Fix it. Fixes: 6888199f ("[POWERPC] Emulate more instructions in software") Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
commit 87c4b83e upstream. The mcrf emulation code was using the CR field number directly as the shift value, without taking into account that CR fields are numbered from 0-7 starting at the high bits. That meant it was looking at the CR fields in the reverse order. Fixes: cf87c3f6 ("powerpc: Emulate icbi, mcrf and conditional-trap instructions") Signed-off-by:
-
Michael Ellerman authored
commit 01e6a61a upstream. Although it's not documented anywhere, there is an expectation that atomic64_inc_not_zero() returns a result which fits in an int. This is the behaviour implemented on all arches except powerpc. This has caused at least one bug in practice, in the percpu-refcount code, where the long result from our atomic64_inc_not_zero() was truncated to an int leading to lost references and stuck systems. That was worked around in that code in commit 966d2b04 ("percpu-refcount: fix reference leak during percpu-atomic transition"). To the best of my grepping abilities there are no other callers in-tree which truncate the value, but we should fix it anyway. Because the breakage is subtle and potentially very harmful I'm also tagging it for stable. Code generation is largely unaffected because in most cases the callers are just using the result for a test anyway. In particular the case of fget() that was mentioned in commit a6cf7ed5 ("powerpc/atomic: Implement atomic*_inc_not_zero") generates exactly the same code. Fixes: a6cf7ed5 ("powerpc/atomic: Implement atomic*_inc_not_zero") Noticed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Balbir Singh authored
commit e71ff982 upstream. Once upon a time there were only two PP (page protection) bits. In ISA 2.03 an additional PP bit was added, but because of the layout of the HPTE it could not be made contiguous with the existing PP bits. The result is that we now have three PP bits, named pp0, pp1, pp2, where pp0 occupies bit 63 of dword 1 of the HPTE and pp1 and pp2 occupy bits 1 and 0 respectively. Until recently Linux hasn't used pp0, however with the addition of _PAGE_KERNEL_RO we started using it. The problem arises in the LPAR code, where we need to translate the PP bits into the argument for the H_PROTECT hypercall. Currently the code only passes bits 0-2 of newpp, which covers pp1, pp2 and N (no execute), meaning pp0 is not passed to the hypervisor at all. We can't simply pass it through in bit 63, as that would collide with a different field in the flags argument, as defined in PAPR. Instead we have to shift it down to bit 8 (IBM bit 55). Fixes: e58e87ad ("powerpc/mm: Update _PAGE_KERNEL_RO") Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Simplify the test, rework change log] Signed-off-by:
-
Bart Van Assche authored
commit 9f4ab18a upstream. scsiback_release_cmd() must not dereference se_cmd->se_tmr_req because that memory is freed by target_free_cmd_mem() before scsiback_release_cmd() is called. Fix this use-after-free by inlining struct scsiback_tmr into struct vscsibk_pend. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Cc: xen-devel@lists.xenproject.org Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 138d351e upstream. This patch re-introduces part of a long standing login workaround that was recently dropped by: commit 1c99de98 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Apr 2 13:36:44 2017 -0700 iscsi-target: Drop work-around for legacy GlobalSAN initiator Namely, the workaround for FirstBurstLength ended up being required by Mellanox Flexboot PXE boot ROMs as reported by Robert. So this patch re-adds the work-around for FirstBurstLength within iscsi_check_proposer_for_optional_reply(), and makes the key optional to respond when the initiator does not propose, nor respond to it. Also as requested by Arun, this patch introduces a new TPG attribute named 'login_keys_workaround' that controls the use of both the FirstBurstLength workaround, as well as the two other existing workarounds for gPXE iSCSI boot client. By default, the workaround is enabled with login_keys_workaround=1, since Mellanox FlexBoot requires it, and Arun has verified the Qlogic MSFT initiator already proposes FirstBurstLength, so it's uneffected by this re-adding this part of the original work-around. Reported-by:
Robert LeBlanc <robert@leblancnet.us> Cc: Robert LeBlanc <robert@leblancnet.us> Reviewed-by:
Arun Easi <arun.easi@cavium.com> Signed-off-by:
-
Ewan D. Milne authored
commit f9279c96 upstream. The addition of the STARGET_REMOVE state had the side effect of introducing a race condition that can cause a crash. scsi_target_reap_ref_release() checks the starget->state to see if it still in STARGET_CREATED, and if so, skips calling transport_remove_device() and device_del(), because the starget->state is only set to STARGET_RUNNING after scsi_target_add() has called device_add() and transport_add_device(). However, if an rport loss occurs while a target is being scanned, it can happen that scsi_remove_target() will be called while the starget is still in the STARGET_CREATED state. In this case, the starget->state will be set to STARGET_REMOVE, and as a result, scsi_target_reap_ref_release() will take the wrong path. The end result is a panic: [ 1255.356653] Oops: 0000 [#1] SMP [ 1255.360154] Modules linked in: x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel ghash_clmulni_i [ 1255.393234] CPU: 5 PID: 149 Comm: kworker/u96:4 Tainted: G W 4.11.0+ #8 [ 1255.401879] Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013 [ 1255.410327] Workqueue: scsi_wq_6 fc_scsi_scan_rport [scsi_transport_fc] [ 1255.417720] task: ffff88060ca8c8c0 task.stack: ffffc900048a8000 [ 1255.424331] RIP: 0010:kernfs_find_ns+0x13/0xc0 [ 1255.429287] RSP: 0018:ffffc900048abbf0 EFLAGS: 00010246 [ 1255.435123] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 1255.443083] RDX: 0000000000000000 RSI: ffffffff8188d659 RDI: 0000000000000000 [ 1255.451043] RBP: ffffc900048abc10 R08: 0000000000000000 R09: 0000012433fe0025 [ 1255.459005] R10: 0000000025e5a4b5 R11: 0000000025e5a4b5 R12: ffffffff8188d659 [ 1255.466972] R13: 0000000000000000 R14: ffff8805f55e5088 R15: 0000000000000000 [ 1255.474931] FS: 0000000000000000(0000) GS:ffff880616b40000(0000) knlGS:0000000000000000 [ 1255.483959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1255.490370] CR2: 0000000000000068 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 1255.498332] Call Trace: [ 1255.501058] kernfs_find_and_get_ns+0x31/0x60 [ 1255.505916] sysfs_unmerge_group+0x1d/0x60 [ 1255.510498] dpm_sysfs_remove+0x22/0x60 [ 1255.514783] device_del+0xf4/0x2e0 [ 1255.518577] ? device_remove_file+0x19/0x20 [ 1255.523241] attribute_container_class_device_del+0x1a/0x20 [ 1255.529457] transport_remove_classdev+0x4e/0x60 [ 1255.534607] ? transport_add_class_device+0x40/0x40 [ 1255.540046] attribute_container_device_trigger+0xb0/0xc0 [ 1255.546069] transport_remove_device+0x15/0x20 [ 1255.551025] scsi_target_reap_ref_release+0x25/0x40 [ 1255.556467] scsi_target_reap+0x2e/0x40 [ 1255.560744] __scsi_scan_target+0xaa/0x5b0 [ 1255.565312] scsi_scan_target+0xec/0x100 [ 1255.569689] fc_scsi_scan_rport+0xb1/0xc0 [scsi_transport_fc] [ 1255.576099] process_one_work+0x14b/0x390 [ 1255.580569] worker_thread+0x4b/0x390 [ 1255.584651] kthread+0x109/0x140 [ 1255.588251] ? rescuer_thread+0x330/0x330 [ 1255.592730] ? kthread_park+0x60/0x60 [ 1255.596815] ret_from_fork+0x29/0x40 [ 1255.600801] Code: 24 08 48 83 42 40 01 5b 41 5c 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 [ 1255.621876] RIP: kernfs_find_ns+0x13/0xc0 RSP: ffffc900048abbf0 [ 1255.628479] CR2: 0000000000000068 [ 1255.632756] ---[ end trace 34a69ba0477d036f ]--- Fix this by adding another scsi_target state STARGET_CREATED_REMOVE to distinguish this case. Fixes: f05795d3 ("scsi: Add intermediate STARGET_REMOVE state to scsi_target_state") Reported-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 62e62ffd upstream. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Tested-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by:
James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit a7e2d1bc upstream. of_genpd_remove_last() iterates over list of domains and removes matching element thus it has to use safe version of list iteration. Fixes: 17926551 (PM / Domains: Add support for removing nested PM domains by provider) Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit b556b15d upstream. of_genpd_del_provider() iterates over list of domain provides and removes matching element thus it has to use safe version of list iteration. Fixes: aa42240a (PM / Domains: Add generic OF-based PM domain look-up) Signed-off-by:
-
Krzysztof Kozlowski authored
commit c6e83cac upstream. pm_genpd_remove_subdomain() iterates over domain's master_links list and removes matching element thus it has to use safe version of list iteration. Fixes: f721889f ("PM / Domains: Support for generic I/O PM domains (v8)") Signed-off-by:
-
Satish Babu Patakokila authored
commit 01b8cedf upstream. Currently compress driver hardcodes direction as playback to get substream from the stream. This results in getting the incorrect substream for compressed capture usecase. To fix this, remove the hardcoding and derive substream based on the stream direction. Signed-off-by:
Satish Babu Patakokila <sbpata@codeaurora.org> Signed-off-by:
Banajit Goswami <bgoswami@codeaurora.org> Acked-By:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Matwey V Kornilov authored
commit 440aeca4 upstream. The functions igb_read_phy_reg_gs40g/igb_write_phy_reg_gs40g (which were removed in 2a3cdead) explicitly selected the required page at every phy_reg access. Currently, igb_get_phy_id_82575 relays on the fact that page 0 is already selected. The assumption is not fulfilled for my Lex 3I380CW motherboard with integrated dual i211 based gigabit ethernet. This leads to igb initialization failure and network interfaces are not working: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 igb: probe of 0000:02:00.0 failed with error -2 In order to fix it, we explicitly select page 0 before first access to phy registers. See also: https://bugzilla.suse.com/show_bug.cgi?id=1009911 See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf Fixes: 2a3cdead ("igb: Remove GS40G specific defines/functions") Signed-off-by:
Matwey V Kornilov <matwey@sai.msu.ru> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jan Kara authored
commit b7f8a09f upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __btrfs_set_acl() into btrfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: linux-btrfs@vger.kernel.org CC: David Sterba <dsterba@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Arnd Bergmann authored
commit 4a4274bf upstream. In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 329d8230 upstream. This file is filled with complex cryptography. Thus, the comparisons of MACs and secret keys and curve points and so forth should not add timing attacks, which could either result in a direct forgery, or, given the complexity, some other type of attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Adrian Hunter authored
commit 6a558f12 upstream. Sometimes a FUP packet is associated with a TSX transaction and a flag is set to indicate that. Ensure that flag is cleared on any error condition because at that point the decoder can no longer assume it is correct. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 622b7a47 upstream. The decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Currently the FUP packet is used only in the case of an overflow, however there is no reason for that to be a special case. So just use FUP always when scanning for an IP. Signed-off-by:
-
Adrian Hunter authored
commit f952eace upstream. Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is not updated when a branch target has been suppressed, which is indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so ensure never to set 'last_ip' when packet 'count' is zero. Signed-off-by:
-
Adrian Hunter authored
commit ee14ac0e upstream. Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is considered to be reset to zero whenever there is a synchronization packet (PSB). The decoder wasn't doing that, and was treating the zero value to mean that there was no last IP, whereas compression can be done against the zero value. Fix by setting last_ip to zero when a PSB is received and keep track of have_last_ip. Signed-off-by:
-
Adrian Hunter authored
commit ad7167a8 upstream. A value of zero is used to indicate that there is no IP. Ensure the value is zero when the state is INTEL_PT_STATE_NO_IP. Signed-off-by:
-
Adrian Hunter authored
commit 12b70806 upstream. The return compression stack must be cleared whenever there is a PSB. Fix one case where that was not happening. Signed-off-by:
-
Adrian Hunter authored
commit 3f04d98e upstream. The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. Improve that situation by using the pkt_state to determine when to use the current or previous timestamp. Signed-off-by:
-
Adrian Hunter authored
commit 22c06892 upstream. Move decoder error setting into one condition. Cc'ed to stable because later fixes depend on it. Signed-off-by:
-
Mateusz Jurczyk authored
commit f6a5885f upstream. Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() handlers of the AF_NFC socket. Since the syscall doesn't enforce a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Mateusz Jurczyk authored
commit 608c4adf upstream. Fix the sockaddr length verification in the connect() handler of NFC/LLCP sockets, to compare against the size of the actual structure expected on input (sockaddr_nfc_llcp) instead of its shorter version (sockaddr_nfc). Both structures are defined in include/uapi/linux/nfc.h. The fields specific to the _llcp extended struct are as follows: 276 __u8 dsap; /* Destination SAP, if known */ 277 __u8 ssap; /* Source SAP to be bound to */ 278 char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */; 279 size_t service_name_len; If the caller doesn't provide a sufficiently long sockaddr buffer, these fields remain uninitialized (and they currently originate from the stack frame of the top-level sys_connect handler). They are then copied by llcp_sock_connect() into internal storage (nfc_llcp_sock structure), and could be subsequently read back through the user-mode getsockname() function (handled by llcp_sock_getname()). This would result in the disclosure of up to ~70 uninitialized bytes from the kernel stack to user-mode clients capable of creating AFC_NFC sockets. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
