- 09 Aug, 2024 2 commits
-
-
Matthew Brost authored
The critical section which requires the VM dma-resv is the call xe_lrc_create in __xe_exec_queue_init. Move this lock to __xe_exec_queue_init holding it just around xe_lrc_create. Not only is good practice, this also fixes a locking double of the VM dma-resv in the error paths of __xe_exec_queue_init as xe_lrc_put tries to acquire this too resulting in a deadlock. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240724152831.1848325-1-matthew.brost@intel.com
-
Michal Wajdeczko authored
When validating VF config on the media GT, we may wrongly report that VF is already partially configured on it, as we consider GGTT and LMEM provisioning done on the primary GT (since both GGTT and LMEM are tile-level resources, not a GT-level). This will cause skipping a VF auto-provisioning on the media-GT and in result will block a VF from successfully initialize that GT. Fix that by considering GGTT and LMEM configurations only when checking if a VF provisioning is complete, and omit GGTT and LMEM when reporting empty/partial provisioning. Fixes: 234670ce ("drm/xe/pf: Skip fair VFs provisioning if already provisioned") Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240806180516.618-1-michal.wajdeczko@intel.com
-
- 08 Aug, 2024 2 commits
-
-
Daniele Ceraolo Spurio authored
This WA is applied while initializing the media GT, but it a primary GT WA (because it modifies a register on the primary GT), so the XE_WA macro is returning false even when the WA should be applied. Fix this by using the primary GT in the macro. Note that this WA only applies to PXP and we don't yet support that in Xe, so there are no negative effects to this bug, which is why we didn't see any errors in testing. v2: use the primary GT in the macro instead of marking the WA as platform-wide (Lucas, Matt). Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240807235333.1370915-1-daniele.ceraolospurio@intel.com
-
Julia Filipchuk authored
Enable workarounds for HW bug where render engine reset fails. Given that we're bumping the minimum required GuC version to 70.29, we're guaranteed to always have support for this KLV in the GuC. v2: Enable KLV correctly for either workaround (Lucas) v4: Add check for minimum supported GuC firmware version. Enable w/a for hw version 20.01 too. (Daniele) v5 (Daniele): remove now unneeded fw type and version checks (JohnH) Signed-off-by:
Julia Filipchuk <julia.filipchuk@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
-
- 07 Aug, 2024 3 commits
-
-
Nirmoy Das authored
Check size of the data not size of the pointer. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407300421.IBkAja96-lkp@intel.com/ Fixes: 0fde907d ("drm/xe: Validate user fence during creation") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Apoorva Singh <apoorva.singh@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240806110722.28661-1-nirmoy.das@intel.comSigned-off-by:
Nirmoy Das <nirmoy.das@intel.com>
-
Mika Kuoppala authored
kerneldoc was missing from earlier commit where we exported xe_hw_engine_lookup. Add it. Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: intel-xe@lists.freedesktop.org Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
Dominik Grzegorzek authored
Export hw engine's mmio accessors. This is in preparation to use these from eudebug code. v2: s/hw_engine_mmio/xe_hw_engine_mmio (Matthew) v3: kernel doc (Matthew) Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Dominik Grzegorzek <dominik.grzegorzek@intel.com> Signed-off-by:
-
- 06 Aug, 2024 3 commits
-
-
Julia Filipchuk authored
UAPI version 1.13.4 Signed-off-by:
-
Julia Filipchuk authored
The VF API version for this release is 1.13.4. Bumping the minimum required GuC version just before force-probe removal allows us to set a baseline for what API features are expected to be available. I.e., at this point there is no need for any version checking in the code before using a feature. Of course, if/when the API is extended in future GuC releases, those new features will need API version checks in the code. Bump the recommended GuC versions to match. Also add numerical comparison helpers to simplify the version number checks. v2: Reword commit message and make comparison helpers GuC specific - review feedback from Daniele, done by JohnH Signed-off-by:
-
Shekhar Chauhan authored
Update performance tuning according to the hardware spec. Bspec: 72161 Signed-off-by:
Shekhar Chauhan <shekhar.chauhan@intel.com> Reviewed-by:
Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> Reviewed-by:
Akshata Jahagirdar <akshata.jahagirdar@intel.com> Signed-off-by:
-
- 05 Aug, 2024 2 commits
-
-
Matthew Brost authored
We only set the last fence on user binds, so no need to check last fence kernel issued binds. Will avoid blowing up last fence lockdep asserts. Cc: Francois Dugast <francois.dugast@intel.com> Signed-off-by:
-
Ashutosh Dixit authored
An empty sysctl table entry was inadvertently left behind for observation sysctl. The breaks on 6.11 with the following errors: [ 219.654850] sysctl table check failed: dev/xe/(null) procname is null [ 219.654862] sysctl table check failed: dev/xe/(null) No proc_handler Drop the empty entry. Fixes: 8169b209 ("drm/xe/uapi: Rename xe perf layer as xe observation layer") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2419Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240805062057.3547560-1-ashutosh.dixit@intel.com
-
- 02 Aug, 2024 1 commit
-
-
Akshata Jahagirdar authored
Add Compression Performance Improvement Changes in Xe2 v2: Rebase v3: Rebase, updated as per latest changes on bspec, Removed unnecessary default actions (Matt) formatting nits (Tejas) v4: Formatting nits, removed default set action for bit 14 (Matt) Bspec: 72161 Signed-off-by:
-
- 01 Aug, 2024 5 commits
-
-
Matthew Brost authored
The current algorithm to read out devcoredump is O(N*N) where N is the size of coredump due to usage of the drm_coredump_printer in xe_devcoredump_read. Switch to a O(N) algorithm which prints the devcoredump into a readable format in snapshot work and update xe_devcoredump_read to memcpy from the readable format directly. v2: - Fix double free on devcoredump removal (Testing) - Set read_data_size after snap work flush - Adjust remaining in iterator upon realloc (Testing) - Set read_data upon realloc (Testing) v3: - Kernel doc v4: - Two pass algorithm to determine size (Maarten) v5: - Use scope for reading variables (Johnathan) Reported-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2408 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Matthew Brost authored
We want to determine the size of the devcoredump before writing it out. To that end, we will run the devcoredump printer with NULL data to get the size, alloc data based on the generated offset, then run the devcorecump again with a valid data pointer to print. This necessitates not writing data to the data pointer on the initial pass, when it is NULL. v5: - Better commit message (Jonathan) - Add kerenl doc with examples (Jani) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
Matthew Brost authored
Kernel BO's don't take a ref to the VM, we need the VM for the delayed snapshot, so take a ref to the VM in delayed snapshot. v2: - Check for lrc_bo before taking a VM ref (CI) - Check lrc_bo->vm before taking / dropping a VM ref (CI) - Drop VM in xe_lrc_snapshot_free v5: - Fix commit message wording (Johnathan) Fixes: 47058633 ("drm/xe: Move lrc snapshot capturing to xe_lrc.c") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Karthik Poosa authored
In xe_hwmon_power_max_write, for PL1 disable supported case, instead of returning after PL1 disable, PL1 enable path was also being run. Fixed it by returning after disable. v2: Correct typo and grammar in commit message. (Jonathan) Signed-off-by:
Karthik Poosa <karthik.poosa@intel.com> Fixes: fef6dd12 ("drm/xe/hwmon: Protect hwmon rw attributes with hwmon_lock") Reviewed-by:
-
Pallavi Mishra authored
Enable feature to allow memory reads to take a priority memory path. This will reduce latency on the read path, but may introduce read after write (RAW) hazards as read and writes will no longer be ordered. To avoid RAW hazards, SW can use the MI_MEM_FENCE command or any other MI command that generates non posted memory writes. This will ensure data is coherent in memory prior to execution of commands which read data from memory. RCS,BCS and CCS support this feature. No pattern identified in KMD that could lead to a hazard. v2: Modify commit message, enable priority mem read feature for media, modify version range, modify bspec detail (Matt Roper) v3: Rebase, fix cramped line-wrapping (jcavitt) v4: Rebase v5: Media does not support Priority Mem Read. Modify commit to reflect the same. v6: Rebase Bspec: 60298, 60237, 60187, 60188 Signed-off-by:
Pallavi Mishra <pallavi.mishra@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Acked-by:
Carl Zhang <carl.zhang@intel.com> Signed-off-by:
-
- 31 Jul, 2024 2 commits
-
-
Dominik Grzegorzek authored
Move and export xe_hw_engine lookup. This is in preparation to use this in eudebug code where we want to find active engine. v2: s/tile/gt due to uapi changes (Mika) Signed-off-by:
-
Matthew Brost authored
A chain fence is uninitialized if not installed in a drm sync obj. Thus if xe_sync_entry_cleanup is called and sync->chain_fence is non-NULL the proper cleanup is dma_fence_chain_free rather than a dma-fence put. Reported-by:
-
- 30 Jul, 2024 1 commit
-
-
Geert Uytterhoeven authored
When building with gcc-5: In function ‘decode_oa_format.isra.26’, inlined from ‘xe_oa_set_prop_oa_format’ at drivers/gpu/drm/xe/xe_oa.c:1664:6: ././include/linux/compiler_types.h:510:38: error: call to ‘__compiletime_assert_1336’ declared with attribute error: FIELD_GET: mask is not constant [...] ./include/linux/bitfield.h:155:3: note: in expansion of macro ‘__BF_FIELD_CHECK’ __BF_FIELD_CHECK(_mask, _reg, 0U, "FIELD_GET: "); \ ^ drivers/gpu/drm/xe/xe_oa.c:1573:18: note: in expansion of macro ‘FIELD_GET’ u32 bc_report = FIELD_GET(DRM_XE_OA_FORMAT_MASK_BC_REPORT, fmt); ^ Fixes: b6fd51c6 ("drm/xe/oa/uapi: Define and parse OA stream properties") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
- 29 Jul, 2024 10 commits
-
-
Sai Teja Pottumuttu authored
Add performance tuning changes for Xe2_HPG Bspec: 72161 Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Now that rtp has OR rules, it's not needed to extend it to process OOB WAs. Previously if an entry had no name, it was considered as "a set of rules OR'ed with the last named entry". Instead of generating new entries, add OR rules. The syntax for xe_wa_oob.rules remains the same, with xe_gen_wa_oob generating the slightly different table. Object sizes delta are negligible, but having just one logic makes it easier to maintain: add/remove: 0/0 grow/shrink: 1/2 up/down: 160/-269 (-109) Function old new delta __compound_literal 6104 6264 +160 xe_wa_dump 1839 1810 -29 oob_was 816 576 -240 Total: Before=17257, After=17148, chg -0.63% Reviewed-by:
-
Lucas De Marchi authored
Like commit 512660cd ("drm/xe/rtp: Expand max rules/actions per entry") did, expand the maximum number of actions/rules. That commit was too conservative, just incrementing 2. Other than the ugliness of these macros and additional preprocessor steps when they are used, there are no downsides on increasing the maximum: the tables in which they are used use a sentinel to mark the last element. With rtp processing now supporting OR rules, it's possible to migrate the extension made for OOB WAs that "entries with name are OR'ed in previous entry". For that the maximum number of rules needs to be increased. Just double it. Hopefully 12 is sufficient for longer than 6 was. Reviewed-by:
-
Lucas De Marchi authored
Stop doing the calculation both in rtp_mark_active() and in its caller. The caller easily knows the number of entries to mark, so just pass it forward. That also simplifies rtp_mark_active() since now it doesn't have a special case when handling 1 entry. Reviewed-by:
-
Lucas De Marchi authored
The OOB WAs use xe_rtp_process(), without passing an sr to save result of the actions since there are none. They are also executed in a gt-only context, making it harder to share the implementation. Thus, introduce a new set of tests to check these RTP entries. The only check that can be done is if the entry was marked as active. Before commit fd6797ec ("drm/xe/rtp: Fix off-by-one when processing rules") several of these tests were failing: the processing of OR'ed entries would make the subsequent entry to be inadvertently enabled. Reviewed-by:
-
Lucas De Marchi authored
Those tests check the behavior of xe_rtp_process_to_sr(), so name them accordingly to allow adding tests for xe_rtp_process() later. Reviewed-by:
-
Lucas De Marchi authored
Enabling active tracking in the rtp context and check for all the tests the expected entries become active. Reviewed-by:
-
Lucas De Marchi authored
The RTP tests check both the result of processing the RTP entries and the outcome saved as SR entries. Rename "count" to be explicit about what's being counted. Reviewed-by:
-
Lucas De Marchi authored
Add one variant for BMG to make sure the workarounds do not conflict. This matches the machine with BMG in CI: BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_LPG / Xe2_HPG (20.01) media:Xe2_LPM / Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1 Stepping = (G:A0, M:A1, D:**, B:**) Reviewed-by: -
Matt Roper authored
Although all current Xe2 platforms support FlatCCS, we probably shouldn't assume that will be universally true forever. In the past we've had platforms like PVC that didn't support compression, and the same could show up again at some point in the future. Future-proof the migration code by adding an explicit check for FlatCCS support to the condition that decides whether to use a compressed PAT index for migration. While we're at it, we can drop the IS_DGFX check since it's redundant with the src_is_vram check (only dGPUs have VRAM). Cc: Akshata Jahagirdar <akshata.jahagirdar@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
- 26 Jul, 2024 2 commits
-
-
Lucas De Marchi authored
Gustavo noticed an odd "+ 2" in rtp_mark_active() while processing rtp rules and pointed that it should be "+ 1". In fact, while processing entries without actions (OOB workarounds), if the WA is activated and has OR rules, it will also inadvertently activate the very next workaround. Test in a LNL B0 platform by moving 18024947630 on top of 16020292621, makes the latter become active: $ cat /sys/kernel/debug/dri/0/gt0/workarounds ... OOB Workarounds 18024947630 16020292621 14018094691 16022287689 13011645652 22019338487_display In future a kunit test will be added to cover the rtp checks for entries without actions. Fixes: fe19328b ("drm/xe/rtp: Add support for entries with no action") Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
-
Matthew Brost authored
Ensure we are managing G2H credits correctly. Extra important now that this is tied to PM. Signed-off-by:
-
- 25 Jul, 2024 5 commits
-
-
Gustavo Sousa authored
The implementations for xe_mmio_wait32() and xe_mmio_wait32_not() are almost identical. Let us avoid duplication of logic by having them calling a common __xe_mmio_wait32() function. Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by:
-
Gustavo Sousa authored
The declaration of xe_mmio_probe_vram() became useless since commit 638d1c79 ("drm/xe: Promote VRAM initialization function to own file"). Remove it. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Add the unversioned define for the BMG HuC FW. Signed-off-by:
-
Daniele Ceraolo Spurio authored
As with previous binaries, we match the compatibility version instead of the build number. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Add the unversioned define for the LNL HuC FW. All new binaries are GSC-enabled (and even if they weren't the driver can detect the type of HuC binary), so the new lnl HuC filename doesn't use the _gsc postfix to avoid confusion with the GSC binary. Signed-off-by:
-
- 24 Jul, 2024 2 commits
-
-
Matthew Brost authored
Store xe_device ahead of processing message as message can be free'd in some cases. v2: - Including missing local changes v3: - Resend for CI Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202407231445.rpisd1vA-lkp@intel.com/ Fixes: d930c19f ("drm/xe: Build PM into GuC CT layer") Signed-off-by:
-
Himal Prasad Ghimiray authored
Register SOFTWARE_FLAGS_SPR33 is unused; therefore, delete it. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
