- 13 Mar, 2023 40 commits
-
-
AngeloGioacchino Del Regno authored
Convert apmixedsys clocks to be a platform driver; while at it, also add necessary error handling to the probe function, add a remove callback and provide a MODULE_DESCRIPTION(). This driver is now compatible with an eventual module build. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230306140543.1813621-53-angelogioacchino.delregno@collabora.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org>
-
AngeloGioacchino Del Regno authored
Instead of calling clk_prepare_enable() for clocks that shall stay enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that. Fixes: a8aede79 ("clk: mediatek: Add basic clocks for Mediatek MT8135.") Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for migrating mt8135 clocks to the common simple probe mechanism, move the apmixedsys clocks to a different file. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add a MODULE_DEVICE_TABLE() on all clocks that can be built as modules to allow auto-load at boot. Signed-off-by:
Miles Chen <miles.chen@mediatek.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks Link: https://lore.kernel.org/r/20230306140543.1813621-50-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Bootloaders must in a way setup the SoC to boot Linux: this means that it will be possible to decompress a ramdisk and eventually insert the core clock driver module from there. Allow module build for all MT8192 clocks by switching to tristate. Signed-off-by:
-
AngeloGioacchino Del Regno authored
This is the last man standing in clk-mt8192.c that won't allow us to use the module_platform_driver() macro, and for *no* good reason. Move it to clk-mt8192-apmixedsys.c and while at it, also add a .remove() callback for it. Also, since the need for "clk-mt8192-simple" and "clk-mt8192" was just due to them being in the same file and probing different clocks, and since now there's just one platform_driver struct per file, it seemed natural to rename the `-simple` variant to just "clk-mt8192". Signed-off-by:
-
AngeloGioacchino Del Regno authored
When building clock drivers for MT8186, some may want to build in only some of them to, for example, get CPUFreq up faster, and some may want to leave out some clock drivers entirely as a machine may not need the Warp Engine or the camera ISP (hence, their clock drivers). Split the various clock drivers in their own configuration options, keeping MT8186 configuration options consistent with other MediaTek SoCs. While at it, also allow building the remaining clock drivers as modules by switching COMMON_CLK_MT8186 to tristate. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Most of the MT6797 clock drivers can be built as modules: change them to tristate to allow that. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Most of the MT6765 clock drivers can be built as modules: change them to tristate to allow that. Signed-off-by:
-
AngeloGioacchino Del Regno authored
All MT8183 clocks are platform drivers now! Allow module build for all of them. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Almost all MT8167 clocks have been converted to use the common probe mechanism, moreover, now all of them are platform drivers: allow building as modules. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Now that all drivers are using the simple probe mechanism change the MT7622 clock drivers to tristate in Kconfig to allow module build. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Allow building non boot critical clocks for MT8192 SoC as modules by changing them to tristate. Signed-off-by:
-
AngeloGioacchino Del Regno authored
MT8195 clock drivers were encapsulated in one single (and big) Kconfig option: there's no reason to do that, as it is totally unnecessary to build in all or none of them. Split them out: keep boot-critical clocks as bool and allow choosing non critical clocks as tristate. As a note, the dependencies of VDEC/VENCSYS and CAM/IMG/IPE/WPESYS are not for build-time but rather for runtime, as clocks registered by those have runtime dependencies on either or both VPP and IMGSYS. Signed-off-by:
-
AngeloGioacchino Del Regno authored
All of the mt2712 drivers have been converted to platform drivers! Change the Kconfig options for all MT2712 clocks to tristate to allow building all clock drivers as modules. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In order to successfully build clock drivers as modules it is required to declare a module license: add it where missing. While at it, also change the MODULE_LICENSE text from "GPL v2" to "GPL" (which means the same) on clk-mt7981-eth.c. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Lots of clock drivers have got both .probe() and a .remove() callbacks: switch from builtin_platform_driver() to module_platform_driver() so that we actually register the .remove() callback. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Convert MT8186 MCUSYS clocks to the common mtk_clk_simple_probe(). Signed-off-by:
-
AngeloGioacchino Del Regno authored
Convert this driver to use the common mtk_clk_simple_probe() mechanism. While at it, also remove __initconst annotations (as these structures are used also at runtime). Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20230306140543.1813621-35-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Convert this driver to use the common mtk_clk_simple_probe() mechanism. While at it, also use module_platform_driver() instead, as this driver just gained a .remove() callback during the conversion. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Instead of calling clk_prepare_enable() at probe time, add the PLL_AO flag to CLK_APMIXED_ARMPLL clock: this will set CLK_IS_CRITICAL. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Propagate struct device for divider clocks registered through clk-mtk helpers to be able to get runtime PM support for MTK clocks. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Now that all MT8516 drivers have been converted to platform driver, change the configuration options to tristate. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Convert the MT8516 clock drivers to be platform drivers and use the common probe mechanism. Thanks to the conversion, more error handling was added to the clocks registration. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for migrating mt8516 clocks to the common simple probe mechanism, convert the apmixedsys to be a separated platform driver and move it to clk-mt8516-apmixedsys.c. While at it, also fix some indentation issues. During the conversion, error handling was added to the apmixedsys probe function. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Convert the MT7622 topckgen and pericfg clock drivers to platform drivers and use the simple probe mechanism. This also allows to build these clocks as modules. Thanks to the conversion, more error handling was added to the clocks registration. Signed-off-by:
-
AngeloGioacchino Del Regno authored
The infracfg driver cannot be converted to clk_mtk_simple_probe() as it registers cpumuxes, which is not supported on the common probing mechanism: for this reason, move it to its own file. While at it, also convert it to be a platform driver instead; to do so, also add a .remove() callback for this driver. During the conversion, error handling was added to the infracfg probe function. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add a .remove() callback to the apmixedsys driver to allow full module build; while at it, also change the usage of builtin_platform_driver() to module_platform_driver() to actually make use of the new callback. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for migrating mt7622 clocks to the common simple probe mechanism, move apmixedsys clocks to a different file. While at it, use the builtin_platform_driver() macro for it. During the conversion, error handling was added to the apmixedsys probe function. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Instead of calling clk_prepare_enable() for clocks that shall stay enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that. Fixes: 2fc0a509 ("clk: mediatek: add clock support for MT7622 SoC") Signed-off-by:
-
AngeloGioacchino Del Regno authored
All the various MediaTek clock drivers are, in a way or another, redefining the GATE_MTK() macro with different names: while some are doing that by actually using GATE_MTK(), others are copying it entirely (hence, entirely redefining it). Change all clock drivers to always and consistently use this macro. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Switch to mtk_clk_simple_{probe,remove}() for infracfg and topckgen clocks on MT8183 to allow full module build for clock drivers. Differently from other MediaTek clock drivers, it was necessary to change the name of the `clk13m` clock, as that is already declared in the SoC's devicetree as a "fixed-factor-clock" (with the same name) and redeclaring it here would obviously fail to register the entire clock controller; this clock wasn't dropped only to retain compatibility with older devicetrees As a note, the `clk13m` clock is not mentioned in any parent names array(s) as the correct one (csw_f26m_d2) is already used in place of that. Thanks to the conversion, more error handling was added to the clocks registration. Signed-off-by: -
AngeloGioacchino Del Regno authored
Increase human readability and decrease number of lines by compressing the clock array entries where possible, to a maximum of ~95 columns. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for migrating all other mt8183 clocks to the common mtk_clk_simple_probe(), move apmixedsys clocks to a different file. While at it, use the builtin_platform_driver() macro for it and fix some indentation issues in the PLLs table. During the conversion, error handling was added to the apmixedsys probe function. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Convert topckgen and infracfg clock drivers to use the common mtk_clk_simple_probe() mechanism and change this from the old "static" CLK_OF_DECLARE to be a platform driver, allowing it to eventually be built as a module. Thanks to the conversion, more error handling was added to the clocks registration. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for converting the MT8167 clock drivers to be proper platform_driver(s), drop the __initconst annotation from all of the clock arrays since they will be used not only during init but also during runtime. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for migrating all other MT8167 clocks to the common mtk_clk_simple_probe(), move apmixedsys clocks to a different file. While at it, also migrate away from the legacy CLK_OF_DECLARE and convert this clock driver to be a platform_driver instead. During the conversion, error handling was added to the apmixedsys probe function. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Use the GATE_MTK macro to compress the GATE_TOP{0..5} macros. No functional changes. Signed-off-by: -
AngeloGioacchino Del Regno authored
All clocks in this driver are supported by the common simple probe mechanism and it's now possible to migrate to it. While at it, also switch to using the module_platform_driver() macro. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for migrating this driver to the simple probe mechanism, join the audio gates to the top_misc_mux_gates array of mtk_composite clocks in one top_misc_muxes array. While at it, since the `apll_i2s0_parents` array is for all i2s clocks, rename that to `apll_i2s_parents`. Signed-off-by:
-
