- 21 Sep, 2016 24 commits
-
-
Neal Cardwell authored
Export tcp_mss_to_mtu(), so that congestion control modules can use this to help calculate a pacing rate. Signed-off-by:
Van Jacobson <vanj@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Nandita Dukkipati <nanditad@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
To allow congestion control modules to use the default TSO auto-sizing algorithm as one of the ingredients in their own decision about TSO sizing: 1) Export tcp_tso_autosize() so that CC modules can use it. 2) Change tcp_tso_autosize() to allow callers to specify a minimum number of segments per TSO skb, in case the congestion control module has a different notion of the best floor for TSO skbs for the connection right now. For very low-rate paths or policed connections it can be appropriate to use smaller TSO skbs. Signed-off-by:
-
Neal Cardwell authored
Add the tso_segs_goal() function in tcp_congestion_ops to allow the congestion control module to specify the number of segments that should be in a TSO skb sent by tcp_write_xmit() and tcp_xmit_retransmit_queue(). The congestion control module can either request a particular number of segments in TSO skb that we transmit, or return 0 if it doesn't care. This allows the upcoming BBR congestion control module to select small TSO skb sizes if the module detects that the bottleneck bandwidth is very low, or that the connection is policed to a low rate. Signed-off-by:
-
Yuchung Cheng authored
This commit export two new fields in struct tcp_info: tcpi_delivery_rate: The most recent goodput, as measured by tcp_rate_gen(). If the socket is limited by the sending application (e.g., no data to send), it reports the highest measurement instead of the most recent. The unit is bytes per second (like other rate fields in tcp_info). tcpi_delivery_rate_app_limited: A boolean indicating if the goodput was measured when the socket's throughput was limited by the sending application. This delivery rate information can be useful for applications that want to know the current throughput the TCP connection is seeing, e.g. adaptive bitrate video streaming. It can also be very useful for debugging or troubleshooting. Signed-off-by: -
Soheil Hassas Yeganeh authored
This commit adds code to track whether the delivery rate represented by each rate_sample was limited by the application. Upon each transmit, we store in the is_app_limited field in the skb a boolean bit indicating whether there is a known "bubble in the pipe": a point in the rate sample interval where the sender was application-limited, and did not transmit even though the cwnd and pacing rate allowed it. This logic marks the flow app-limited on a write if *all* of the following are true: 1) There is less than 1 MSS of unsent data in the write queue available to transmit. 2) There is no packet in the sender's queues (e.g. in fq or the NIC tx queue). 3) The connection is not limited by cwnd. 4) There are no lost packets to retransmit. The tcp_rate_check_app_limited() code in tcp_rate.c determines whether the connection is application-limited at the moment. If the flow is application-limited, it sets the tp->app_limited field. If the flow is application-limited then that means there is effectively a "bubble" of silence in the pipe now, and this silence will be reflected in a lower bandwidth sample for any rate samples from now until we get an ACK indicating this bubble has exited the pipe: specifically, until we get an ACK for the next packet we transmit. When we send every skb we record in scb->tx.is_app_limited whether the resulting rate sample will be application-limited. The code in tcp_rate_gen() checks to see when it is safe to mark all known application-limited bubbles of silence as having exited the pipe. It does this by checking to see when the delivered count moves past the tp->app_limited marker. At this point it zeroes the tp->app_limited marker, as all known bubbles are out of the pipe. We make room for the tx.is_app_limited bit in the skb by borrowing a bit from the in_flight field used by NV to record the number of bytes in flight. The receive window in the TCP header is 16 bits, and the max receive window scaling shift factor is 14 (RFC 1323). So the max receive window offered by the TCP protocol is 2^(16+14) = 2^30. So we only need 30 bits for the tx.in_flight used by NV. Signed-off-by: -
Yuchung Cheng authored
This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: -
Neal Cardwell authored
Count the number of packets that a TCP connection marks lost. Congestion control modules can use this loss rate information for more intelligent decisions about how fast to send. Specifically, this is used in TCP BBR policer detection. BBR uses a high packet loss rate as one signal in its policer detection and policer bandwidth estimation algorithm. The BBR policer detection algorithm cannot simply track retransmits, because a retransmit can be (and often is) an indicator of packets lost long, long ago. This is particularly true in a long CA_Loss period that repairs the initial massive losses when a policer kicks in. Signed-off-by:
-
Eric Dumazet authored
Revert to the tcp_skb_cb size check that tcp_init() had before commit b4772ef8 ("net: use common macro for assering skb->cb[] available size in protocol families"). As related commit 744d5a3e ("net: move skb->dropcount to skb->cb[]") explains, the sock_skb_cb_check_size() mechanism was added to ensure that there is space for dropcount, "for protocol families using it". But TCP is not a protocol using dropcount, so tcp_init() doesn't need to provision space for dropcount in the skb->cb[], and thus we can revert to the older form of the tcp_skb_cb size check. Doing so allows TCP to use 4 more bytes of the skb->cb[] space. Fixes: b4772ef8 ("net: use common macro for assering skb->cb[] available size in protocol families") Signed-off-by:
-
Eric Dumazet authored
This commit adds to the fq module a low_rate_threshold parameter to insert a delay after all packets if the socket requests a pacing rate below the threshold. This helps achieve more precise control of the sending rate with low-rate paths, especially policers. The basic issue is that if a congestion control module detects a policer at a certain rate, it may want fq to be able to shape to that policed rate. That way the sender can avoid policer drops by having the packets arrive at the policer at or just under the policed rate. The default threshold of 550Kbps was chosen analytically so that for policers or links at 500Kbps or 512Kbps fq would very likely invoke this mechanism, even if the pacing rate was briefly slightly above the available bandwidth. This value was then empirically validated with two years of production testing on YouTube video servers. Signed-off-by:
-
Neal Cardwell authored
Refactor the TCP min_rtt code to reuse the new win_minmax library in lib/win_minmax.c to simplify the TCP code. This is a pure refactor: the functionality is exactly the same. We just moved the windowed min code to make TCP easier to read and maintain, and to allow other parts of the kernel to use the windowed min/max filter code. Signed-off-by:
-
Neal Cardwell authored
This commit introduces a generic library to estimate either the min or max value of a time-varying variable over a recent time window. This is code originally from Kathleen Nichols. The current form of the code is from Van Jacobson. A single struct minmax_sample will track the estimated windowed-max value of the series if you call minmax_running_max() or the estimated windowed-min value of the series if you call minmax_running_min(). Nearly equivalent code is already in place for minimum RTT estimation in the TCP stack. This commit extracts that code and generalizes it to handle both min and max. Moving the code here reduces the footprint and complexity of the TCP code base and makes the filter generally available for other parts of the codebase, including an upcoming TCP congestion control module. This library works well for time series where the measurements are smoothly increasing or decreasing. Signed-off-by:
-
Soheil Hassas Yeganeh authored
The upcoming change "lib/win_minmax: windowed min or max estimator" introduces a struct called minmax, which is then included in include/linux/tcp.h in the upcoming change "tcp: use windowed min filter library for TCP min_rtt estimation". This would create a compilation error for tcp_cdg.c, which defines its own minmax struct. To avoid this naming conflict (and potentially others in the future), this commit renames the version used in tcp_cdg.c to cdg_minmax. Signed-off-by:
Kenneth Klette Jonassen <kennetkl@ifi.uio.no> Signed-off-by:
-
Sean Wang authored
data_src is unchanged inside the loop, so this patch moves the assignment to outside the loop to avoid unnecessarily assignment Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Vivien Didelot authored
An address can be loaded in the ATU with multiple ports, for instance when adding multiple ports to a Multicast group with "bridge mdb". The current code doesn't allow that. Add an helper to get a single entry from the ATU, then set or clear the requested port, before loading the entry back in the ATU. Note that the required _mv88e6xxx_atu_getnext function is defined below mv88e6xxx_port_db_load_purge, so forward-declare it for the moment. The ATU code will be isolated in future patches. Fixes: 83dabd1f ("net: dsa: mv88e6xxx: make switchdev DB ops generic") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Jamal Hadi Salim authored
With the batch changes that translated transient actions into a temporary list lost in the translation was the fact that tcf_action_destroy() will eventually delete the action from the permanent location if the refcount is zero. Example of what broke: ...add a gact action to drop sudo $TC actions add action drop index 10 ...now retrieve it, looks good sudo $TC actions get action gact index 10 ...retrieve it again and find it is gone! sudo $TC actions get action gact index 10 Fixes: 22dc13c8 ("net_sched: convert tcf_exts from list to pointer array"), Fixes: 824a7e88 ("net_sched: remove an unnecessary list_del()") Fixes: f07fed82 ("net_sched: remove the leftover cleanup_a()") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF direct packet access improvements This set adds write support to the currently available read support for {cls,act}_bpf programs. First one is a fix for affected commit sitting in net-next and prerequisite for the second one, last patch adds a number of test cases against the verifier. For details, please see individual patches. ==================== Signed-off-by: -
Daniel Borkmann authored
Add couple of test cases for direct write and the negative size issue, and also adjust the direct packet access test4 since it asserts that writes are not possible, but since we've just added support for writes, we need to invert the verdict to ACCEPT, of course. Summary: 133 PASSED, 0 FAILED. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b ("bpf: enable direct packet data write for xdp progs") and 6841de8b ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a2 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by:
-
Daniel Borkmann authored
Current contract for the following two helper argument types is: * ARG_CONST_STACK_SIZE: passed argument pair must be (ptr, >0). * ARG_CONST_STACK_SIZE_OR_ZERO: passed argument pair can be either (NULL, 0) or (ptr, >0). With 6841de8b ("bpf: allow helpers access the packet directly"), we can pass also raw packet data to helpers, so depending on the argument type being PTR_TO_PACKET, we now either assert memory via check_packet_access() or check_stack_boundary(). As a result, the tests in check_packet_access() currently allow more than intended with regards to reg->imm. Back in 969bf05e ("bpf: direct packet access"), check_packet_access() was fine to ignore size argument since in check_mem_access() size was bpf_size_to_bytes() derived and prior to the call to check_packet_access() guaranteed to be larger than zero. However, for the above two argument types, it currently means, we can have a <= 0 size and thus breaking current guarantees for helpers. Enforce a check for size <= 0 and bail out if so. check_stack_boundary() doesn't have such an issue since it already tests for access_size <= 0 and bails out, resp. access_size == 0 in case of NULL pointer passed when allowed. Fixes: 6841de8b ("bpf: allow helpers access the packet directly") Signed-off-by: -
Mahesh Bandewar authored
kbuild-build-bot reported that if NETFILTER is not selected, the build fails pointing to netfilter symbols. Fixes: 4fbae7d8 ("ipvlan: Introduce l3s mode") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
pravin shelar authored
since commit commit db74a333 ("openvswitch: use percpu flow stats") flow alloc resets flow-key. So there is no need to reset the flow-key again if OVS is using newly allocated flow-key. Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
pravin shelar authored
There is no need to declare separate key on stack, we can just use sw_flow->key to store the key directly. This commit fixes following warning: net/openvswitch/datapath.c: In function ‘ovs_flow_cmd_new’: net/openvswitch/datapath.c:1080:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-09-19 Here's the main bluetooth-next pull request for the 4.9 kernel. - Added new messages for monitor sockets for better mgmt tracing - Added local name and appearance support in scan response - Added new Qualcomm WCNSS SMD based HCI driver - Minor fixes & cleanup to 802.15.4 code - New USB ID to btusb driver - Added Marvell support to HCI UART driver - Add combined LED trigger for controller power - Other minor fixes here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Alan Cox authored
Dmitry Vyukov wrote: > different runs). Looking at code, the following looks suspicious -- we > limit copy by 512 bytes, but use the original count which can be > larger than 512: > > static void sixpack_receive_buf(struct tty_struct *tty, > const unsigned char *cp, char *fp, int count) > { > unsigned char buf[512]; > .... > memcpy(buf, cp, count < sizeof(buf) ? count : sizeof(buf)); > .... > sixpack_decode(sp, buf, count1); With the sane tty locking we now have I believe the following is safe as we consume the bytes and move them into the decoded buffer before returning. Signed-off-by:Alan Cox <alan@linux.intel.com> Signed-off-by:
-
- 20 Sep, 2016 16 commits
-
-
Jesper Dangaard Brouer authored
Correct drop handling for XDP_TX on TX failure, were recently added in commit 95357907 ("mlx4: fix XDP_TX is acting like XDP_PASS on TX ring full"). The change missed an opportunity for recycling the RX page, instead of going through the page allocator, like the regular XDP_DROP action does. This patch cease the opportunity, by going through the XDP_DROP case. Fixes: 95357907 ("mlx4: fix XDP_TX is acting like XDP_PASS on TX ring full") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
David S. Miller authored
John Crispin says: ==================== net-next: dsa: set_addr should be optional The Marvell driver is the only one that actually sets the switches HW address. All other drivers have an empty stub. fix this by making the callback optional. ==================== Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
John Crispin authored
The set_addr() callback is now optional. Remove the empty stub that qca8k has. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
John Crispin authored
The set_addr() callback is now optional. Remove the empty stub that b53 has. Signed-off-by:
-
John Crispin authored
Only 1 of the 3 drivers currently has a set_addr() operation. Make the set_addr() callback optional to reduce the amount of empty stubs inside the drivers. Signed-off-by:
-
John Crispin authored
commit 83c0afae ("net: dsa: Add new binding implementation") has a duplicate invocation of the set_addr() operation callback. Remove one of them. Signed-off-by:
-
David S. Miller authored
Herbert Xu says: ==================== rhashtable: rhashtable with duplicate objects v3 fixes a bug in the remove path that causes the element count to decrease when it shouldn't, leading to a gigantic hash table when it underflows. v2 contains a reworked insertion slowpath to ensure that the spinlock for the table we're inserting into is taken. This series contains two patches. The first adds the rhlist interface and the second converts mac80211 to use it. If this works out I'll then proceed to convert the other insecure_elasticity users over to this. I've tested the rhlist code with test_rhashtable but I haven't tested the mac80211 conversion. So please give it a go and see if it still works. ==================== Signed-off-by: -
Herbert Xu authored
mac80211 currently uses rhashtable with insecure_elasticity set to true. The latter is because of duplicate objects. What's more, mac80211 walks the rhashtable chains by hand which is broken as rhashtable may contain multiple tables due to resizing or rehashing. This patch fixes it by converting it to the newly added rhltable interface which is designed for use with duplicate objects. With rhltable a lookup returns a list of objects instead of a single one. This is then fed into the existing for_each_sta_info macro. This patch also deletes the sta_addr_hash function since rhashtable defaults to jhash. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
The insecure_elasticity setting is an ugly wart brought out by users who need to insert duplicate objects (that is, distinct objects with identical keys) into the same table. In fact, those users have a much bigger problem. Once those duplicate objects are inserted, they don't have an interface to find them (unless you count the walker interface which walks over the entire table). Some users have resorted to doing a manual walk over the hash table which is of course broken because they don't handle the potential existence of multiple hash tables. The result is that they will break sporadically when they encounter a hash table resize/rehash. This patch provides a way out for those users, at the expense of an extra pointer per object. Essentially each object is now a list of objects carrying the same key. The hash table will only see the lists so nothing changes as far as rhashtable is concerned. To use this new interface, you need to insert a struct rhlist_head into your objects instead of struct rhash_head. While the hash table is unchanged, for type-safety you'll need to use struct rhltable instead of struct rhashtable. All the existing interfaces have been duplicated for rhlist, including the hash table walker. One missing feature is nulls marking because AFAIK the only potential user of it does not need duplicate objects. Should anyone need this it shouldn't be too hard to add. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Vitaly Kuznetsov authored
Small packet loss is reported on complex multi host network configurations including tunnels, NAT, ... My investigation led me to the following check in netback which drops packets: if (unlikely(txreq.size < ETH_HLEN)) { netdev_err(queue->vif->dev, "Bad packet size: %d\n", txreq.size); xenvif_tx_err(queue, &txreq, extra_count, idx); break; } But this check itself is legitimate. SKBs consist of a linear part (which has to have the ethernet header) and (optionally) a number of frags. Netfront transmits the head of the linear part up to the page boundary as the first request and all the rest becomes frags so when we're reconstructing the SKB in netback we can't distinguish between original frags and the 'tail' of the linear part. The first SKB needs to be at least ETH_HLEN size. So in case we have an SKB with its linear part starting too close to the page boundary the packet is lost. I see two ways to fix the issue: - Change the 'wire' protocol between netfront and netback to start keeping the original SKB structure. We'll have to add a flag indicating the fact that the particular request is a part of the original linear part and not a frag. We'll need to know the length of the linear part to pre-allocate memory. - Avoid transmitting SKBs with linear parts starting too close to the page boundary. That seems preferable short-term and shouldn't bring significant performance degradation as such packets are rare. That's what this patch is trying to achieve with skb_copy(). Signed-off-by:Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Raju Lakkaraju authored
All the review comments updated and resending for review. This is MAC interface feature. Microsemi PHY can support RGMII, RMII or GMII/MII interface between MAC and PHY. MAC-IF function program the right value based on Device tree configuration. Tested on Beaglebone Black with VSC 8531 PHY. Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by:
-
Ido Schimmel authored
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Elad Raz authored
Change the RX hash function from XOR to CRC in order to have better distribution of the traffic. Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
-
Rob Swindell authored
bnxt_hwrm_fw_set_time() now returns -EOPNOTSUPP when built for kernel without RTC_LIB. Setting the firmware time is not critical to the successful completion of the firmware update process. Signed-off-by:
Rob Swindell <Rob.Swindell@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Roman Mashak authored
setting conforming action to drop is a valid policy. When it is set we need to at least see the stats indicating it for debugging. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
