GCC assumes that stack is aligned to 16-byte on call sites [1].
Since GCC 8, GCC began using 16-byte aligned SSE instructions to
implement assignments to structs on stack. When
CC_OPTIMIZE_FOR_PERFORMANCE is enabled, this affects
os-Linux/sigio.c, write_sigio_thread:

  struct pollfds *fds, tmp;
  tmp = current_poll;

Note that struct pollfds is exactly 16 bytes in size.
GCC 8+ generates assembly similar to:

  movdqa (%rdi),%xmm0
  movaps %xmm0,-0x50(%rbp)

This is an issue, because movaps will #GP if -0x50(%rbp) is not
aligned to 16 bytes [2], and how rbp gets assigned to is via glibc
clone thread_start, then function prologue, going though execution
trace similar to (showing only relevant instructions):

  sub    $0x10,%rsi
  mov    %rcx,0x8(%rsi)
  mov    %rdi,(%rsi)
  syscall
  pop    %rax
  pop    %rdi
  callq  *%rax
  push   %rbp
  mov    %rsp,%rbp

The stack pointer always points to the topmost element on stack,
rather then the space right above the topmost. On push, the
pointer decrements first before writing to the memory pointed to
by it. Therefore, there is no need to have the stack pointer
pointer always point to valid memory unless the stack is poped;
so the `- sizeof(void *)` in the code is unnecessary.

On the other hand, glibc reserves the 16 bytes it needs on stack
and pops itself, so by the call instruction the stack pointer
is exactly the caller-supplied sp. It then push the 16 bytes of
the return address and the saved stack pointer, so the base
pointer will be 16-byte aligned if and only if the caller
supplied sp is 16-byte aligned. Therefore, the caller must supply
a 16-byte aligned pointer, which `stack + UM_KERN_PAGE_SIZE`
already satisfies.

On a side note, musl is unaffected by this issue because it forces
16 byte alignment via `and $-16,%rsi` in its clone wrapper.
Similarly, glibc i386 is also unaffected because it has
`andl $0xfffffff0, %ecx`.

To reproduce this bug, enable CONFIG_UML_RTC and
CC_OPTIMIZE_FOR_PERFORMANCE. uml_rtc will call
add_sigio_fd which will then cause write_sigio_thread to either go
into segfault loop or panic with "Segfault with no mm".

Similarly, signal stacks will be aligned by the host kernel upon
signal delivery. `- sizeof(void *)` to sigaltstack is
unconventional and extraneous.

On a related note, initialization of longjmp buffers do require
`- sizeof(void *)`. This is to account for the return address
that would have been pushed to the stack at the call site.

The reason for uml to respect 16-byte alignment, rather than
telling GCC to assume 8-byte alignment like the host kernel since
commit d9b0cde9 ("x86-64, gcc: Use
-mpreferred-stack-boundary=3 if supported"), is because uml links
against libc. There is no reason to assume libc is also compiled
with that flag and assumes 8-byte alignment rather than 16-byte.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=40838
[2] https://c9x.me/x86/html/file_module_x86_id_180.htmlSigned-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>

vmalloc() heavy workloads in UML are extremely slow, due to
flushing the entire kernel VM space (flush_tlb_kernel_vm())
on the first segfault.

Implement flush_cache_vmap() to avoid that, and while at it
also add flush_cache_vunmap() since it's trivial.

This speeds up my vmalloc() heavy test of copying files out
from /sys/kernel/debug/gcov/ by 30x (from 30s to 1s.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The generic asm futex implementation emulates atomic access to
memory by doing a get_user followed by put_user. These translate
to two mapping operations on UML with paging enabled in the
meantime. This, in turn may end up changing interrupts,
invoking the signal loop, etc.

This replaces the generic implementation by a mapping followed
by an operation on the mapped segment.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This patch enables the use of optimized xor routines from the x86
tree as well as the necessary fpu api shims so they can work on
UML.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

1. Reflect host cpu flags into the UML instance so they can
be used to select the correct implementations for xor, crypto, etc.

2. Reflect host cache alignment into UML instance. This is
important when running 32 bit on a 64 bit host as 32 bit by
default aligns to 32 while the actual alignment should be 64.
Ditto for some Xeons which align at 128.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

There doesn't seem to be any reason for the rpath being set in
the binaries, at on systems that I tested on. On the other hand,
setting rpath is actually harming binaries in some cases, e.g.
if using nix-based compilation environments where /lib & /lib64
are not part of the actual environment.

Add a new Kconfig option (under EXPERT, for less user confusion)
that allows disabling the rpath additions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The UM virtual PCI devices currently cannot be suspended properly
since the virtio driver already disables VQs well before the PCI
bus's suspend_noirq wants to complete the transition by writing to
PCI config space.

After trying around for a long time with moving the devices on the
DPM list, trying to create dependencies between them, etc. I gave
up and instead added UML specific cross-driver API that lets the
virt-pci code enable not suspending/resuming VQs for its devices.

This then allows the PCI bus suspend_noirq to still talk to the
device, and suspend/resume works properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.

Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.

The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).

Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.

Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

If we happen to get multiple messages while IRQS are already
suspended, we still need to handle them, since otherwise the
simulation blocks.

Remove the "prevent nesting" part, time_travel_add_irq_event()
will deal with being called multiple times just fine.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

We should be able to ndelay() from any context, even from an
interrupt context! However, this is broken (not functionally,
but locking-wise) in time-travel because we'll get into the
time-travel code and enable interrupts to handle messages on
other time-travel aware subsystems (only virtio for now).

Luckily, I've already reworked the time-travel aware signal
(interrupt) delivery for suspend/resume to have a time travel
handler, which runs directly in the context of the signal and
not from the Linux interrupt.

In order to fix this time-travel issue then, we need to do a
few things:

 1) rework the signal handling code to call time-travel handlers
    (only) if interrupts are disabled but signals aren't blocked,
    instead of marking it only pending there. This is needed to
    not deadlock other communication.
 2) rework time-travel to not enable interrupts while it's
    waiting for a message;
 3) rework time-travel to not (just) disable interrupts but
    rather block signals at a lower level while it needs them
    disabled for communicating with the controller.

Finally, since now we can actually spend even virtual time
in interrupts-disabled sections, the delay warning when we
deliver a time-travel delayed interrupt is no longer valid,
things can (and should) now get delayed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This will be necessary in the userspace side to fix the
signal/interrupt handling in time-travel=ext mode, which
is the next patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Use signals_enabled instead of always jumping through
a function call to read it, there's not much point in
that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This function doesn't exist, remove its declaration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Add IO memory emulation that uses callbacks for read/write to
the allocated regions. The callbacks can be registered by the
users using logic_iomem_alloc().

To use, an architecture must 'select LOGIC_IOMEM' in Kconfig
and then include <asm-generic/logic_io.h> into asm/io.h to get
the __raw_read*/__raw_write* functions.

Optionally, an architecture may 'select LOGIC_IOMEM_FALLBACK'
in which case non-emulated regions will 'fall back' to the
various real_* functions that must then be provided.

Cc: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Adjust the kconfig a little to allow disabling NO_IOMEM in UML. To
make an "allyesconfig" with CONFIG_NO_IOMEM=n build, adjust a few
Kconfig things elsewhere and add dummy asm/fb.h and asm/vga.h files.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Correct buffer copying when peeking events

 - Sync cpufeatures/disabled-features.h header with the kernel sources

* tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers cpufeatures: Sync with the kernel sources
  perf session: Correct buffer copying when peeking events

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:

   - Fix use-after-free in nfs4_init_client()

  Bugfixes:

   - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

   - Fix second deadlock in nfs4_evict_inode()

   - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP

   - Fix setting of the NFS_CAP_SECURITY_LABEL capability"

* tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix second deadlock in nfs4_evict_inode()
  NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
  NFS: FMODE_READ and friends are C macros, not enum types
  NFS: Fix a potential NULL dereference in nfs_get_client()
  NFS: Fix use-after-free in nfs4_init_client()
  NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate
  NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Pull SCSI fixes from James Bottomley:
 "Four reasonably small fixes to the core for scsi host allocation
  failure paths.

  The root problem is that we're not freeing the memory allocated by
  dev_set_name(), which involves a rejig of may of the free on error
  paths to do put_device() instead of kfree which, in turn, has several
  other knock on ramifications and inspection turned up a few other
  lurking bugs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Only put parent device if host state differs from SHOST_CREATED
  scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
  scsi: core: Fix failure handling of scsi_add_host_with_dma()
  scsi: core: Fix error handling of scsi_host_alloc()

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of XIP fixes: one to fix alternatives, and one to turn off the
   rest of the features that require code modification

 - A fix to a type that was causing some alternatives to break

 - A build fix for BUILTIN_DTB

* tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix BUILTIN_DTB for sifive and microchip soc
  riscv: alternative: fix typo in macro name
  riscv: code patching only works on !XIP_KERNEL
  riscv: xip: support runtime trap patching

0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 57efa1fe ("mm/gup: prevent gup_fast from
racing with COW during fork").

Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.

From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore

        struct rw_semaphore {
                atomic_long_t count;	/* 8 bytes */
                atomic_long_t owner;	/* 8 bytes */
                struct optimistic_spin_queue osq; /* spinner MCS lock */
                ...

Before commit 57efa1fe adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:

 "and before the addition of the 'write_protect_seq' field, the
  mmap_sem was at offset 120 in 'struct mm_struct'.

  Which meant that count and owner were in two different cachelines,
  and then when you have contention and spend time in
  rwsem_down_write_slowpath(), this is probably *exactly* the kind
  of layout you want.

  Because first the rwsem_write_trylock() will do a cmpxchg on the
  first cacheline (for the optimistic fast-path), and then in the
  case of contention, rwsem_down_write_slowpath() will just access
  the second cacheline.

  Which is probably just optimal for a load that spends a lot of
  time contended - new waiters touch that first cacheline, and then
  they queue themselves up on the second cacheline."

After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.

Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:

  CONFIG_MMU
  CONFIG_MEMBARRIER
  CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES

The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.

Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases.  For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.

Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB fixes from Greg KH:
 "Here are a number of tiny USB fixes for 5.13-rc6.

  There are more than I would normally like, but there's been a bunch of
  people banging on the gadget and dwc3 and typec code recently for I
  think an Android release, which has resulted in a number of small
  fixes. It's nice to see companies send fixes upstream for this type of
  work, a notable change from years ago.

  Anyway, fixes in here are:

   - usb-serial device id updates

   - usb-serial cp210x driver fixes for broken firmware versions

   - typec fixes for crazy charging devices and other reported problems

   - dwc3 fixes for reported problems found

   - gadget fixes for reported problems

   - tiny xhci fixes

   - other small fixes for reported issues.

   - revert of a problem fix found by linux-next testing

  All of these have passed 0-day and linux-next testing with no reported
  problems (the revert for the found linux-next build problem included)"

* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
  Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
  usb: typec: mux: Fix copy-paste mistake in typec_mux_match
  usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
  usb: gadget: fsl: Re-enable driver for ARM SoCs
  usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
  USB: serial: cp210x: fix CP2102N-A01 modem control
  USB: serial: cp210x: fix alternate function for CP2102N QFN20
  usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
  usb: dwc3: ep0: fix NULL pointer exception
  usb: gadget: eem: fix wrong eem header operation
  usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
  usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
  usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
  usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
  usb: fix various gadget panics on 10gbps cabling
  usb: fix various gadgets null ptr deref on 10gbps cabling.
  usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
  usb: f_ncm: only first packet of aggregate needs to start timer
  USB: f_ncm: ncm_bitrate (speed) is unsigned
  MAINTAINERS: usb: add entry for isp1760
  ...

Pull serial driver fix from Greg KH:
 "A single 8250_exar serial driver fix for a reported problem with a
  change that happened in 5.13-rc1.

  It has been in linux-next with no reported problems"

* tag 'tty-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_exar: Avoid NULL pointer dereference at ->exit()

Pull staging driver fixes from Greg KH:
 "Two tiny staging driver fixes:

   - ralink-gdma driver authorship information fixed up

   - rtl8723bs driver fix for reported regression

  Both have been in linux-next for a while with no reported problems"

* tag 'staging-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ralink-gdma: Remove incorrect author information
  staging: rtl8723bs: Fix uninitialized variables

Merge tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "A single debugfs fix for 5.13-rc6, fixing a bug in
  debugfs_read_file_str() that showed up in 5.13-rc1.

  It has been in linux-next for a full week with no
  reported problems"

* tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Fix debugfs_read_file_str()

Pull char/misc driver fixes from Greg KH:
 "Here are some small misc driver fixes for 5.13-rc6 that fix some
  reported problems:

   - Tiny phy driver fixes for reported issues

   - rtsx regression for when the device suspended

   - mhi driver fix for a use-after-free

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
  bus: mhi: pci-generic: Fix hibernation
  bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
  bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
  phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
  phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
  phy: ti: Fix an error code in wiz_probe()
  phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
  phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
  phy: usb: Fix misuse of IS_ENABLED

Pull pin control fixes from Linus Walleij:

 - Fix some documentation warnings for Allwinner

 - Fix duplicated GPIO groups on Qualcomm SDX55

 - Fix a double enablement bug in the Ralink driver

 - Fix the Qualcomm SC8180x Kconfig so the driver can be selected.

* tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Make it possible to select SC8180x TLMM
  pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled
  pinctrl: qcom: Fix duplication in gpio_groups
  pinctrl: aspeed: Fix minor documentation error

Pull block fixes from Jens Axboe:
 "A few fixes that should go into 5.13:

   - Fix a regression deadlock introduced in this release between open
     and remove of a bdev (Christoph)

   - Fix an async_xor md regression in this release (Xiao)

   - Fix bcache oversized read issue (Coly)"

* tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
  block: loop: fix deadlock between open and remove
  async_xor: check src_offs is not NULL before updating it
  bcache: avoid oversized read request in cache missing code path
  bcache: remove bcache device self-defined readahead

Pull io_uring fixes from Jens Axboe:
 "Just an API change for the registration changes that went into this
  release. Better to get it sorted out now than before it's too late"

* tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
  io_uring: add feature flag for rsrc tags
  io_uring: change registration/upd/rsrc tagging ABI

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes:

   - Fix performance regression caused by lack of intended batching of
     RCU callbacks by over-eager NOHZ-full code.

   - Fix cgroups related corruption of load_avg and load_sum metrics.

   - Three fixes to fix blocked load, util_sum/runnable_sum and util_est
     tracking bugs"

* tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
  sched/pelt: Ensure that *_sum is always synced with *_avg
  tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
  sched/fair: Make sure to update tg contrib for blocked load
  sched/fair: Keep load_avg and load_sum synced

Pull perf fixes from Ingo Molnar:
 "Misc fixes:

   - Fix the NMI watchdog on ancient Intel CPUs

   - Remove a misguided, NMI-unsafe KASAN callback from the NMI-safe
     irq_work path used by perf.

   - Fix uncore events on Ice Lake servers.

   - Someone booted maxcpus=1 on an SNB-EP, and the uncore driver
     emitted warnings and was probably buggy. Fix it.

   - KCSAN found a genuine data race in the core perf code. Somewhat
     ironically the bug was introduced through a recent race fix. :-/
     In our defense, the new race window was much more narrow. Fix it"

* tag 'perf-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
  irq_work: Make irq_work_queue() NMI-safe again
  perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server
  perf/x86/intel/uncore: Fix a kernel WARNING triggered by maxcpus=1
  perf: Fix data race between pin_count increment/decrement

Pull objtool fixes from Ingo Molnar:
 "Two objtool fixes:

   - fix a bug that corrupts the code by mistakenly rewriting
     conditional jumps

   - fix another bug generating an incorrect ELF symbol table
     during retpoline rewriting"

* tag 'objtool-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Only rewrite unconditional retpoline thunk calls
  objtool: Fix .symtab_shndx handling for elf_create_undef_symbol()

Fix BUILTIN_DTB config which resulted in a dtb that was actually not
built into the Linux image: in the same manner as Canaan soc does,
create an object file from the dtb file that will get linked into the
Linux image.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull tracing fixes from Steven Rostedt:

 - Fix the length check in the temp buffer filter

 - Fix build failure in bootconfig tools for "fallthrough" macro

 - Fix error return of bootconfig apply_xbc() routine

* tag 'trace-v5.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Correct the length check which causes memory corruption
  ftrace: Do not blindly read the ip address in ftrace_bug()
  tools/bootconfig: Fix a build error accroding to undefined fallthrough
  tools/bootconfig: Fix error return code in apply_xbc()

Pull clang LTO fix from Kees Cook:
 "Clang 13 fixed some IR behavior for LTO, but this broke work-arounds
  used in the kernel.

  Handle changes to needed LTO flags in Clang 13 (Tor Vic)"

* tag 'clang-features-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  x86, lto: Pass -stack-alignment only on LLD < 13.0.0

Pull gpio fix from Bartosz Golaszewski:
 "Fix a shift-out-of-bounds error in gpio-wcd934x"

* tag 'gpio-fixes-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: wcd934x: Fix shift-out-of-bounds error

Pull drm fixes from Dave Airlie:
 "Another week of fixes, nothing too crazy, but a few all over the
  place.

  Two locking fixes in the core/ttm area, a couple of small driver fixes
  (radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes
  each, mostly for smaller things, though the msm has a DSI fix for a
  black screen.

  I haven't seen any intel fixes this week so they may have a few that
  may or may not wait for next week.

  drm:
   - auth locking fix

  ttm:
   - locking fix

  amdgpu:
   - Use kvzmalloc in amdgu_bo_create
   - Use drm_dbg_kms for reporting failure to get a GEM FB
   - Fix some register offsets for Sienna Cichlid
   - Fix fall-through warning

  radeon:
   - memcpy_to/from_io fixes

  msm:
   - NULL ptr deref fix
   - CP_PROTECT reg programming fix
   - incorrect register shift fix
   - DSI blank screen fix

  sun4i:
   - hdmi output probing fix

  mcde:
   - DSI pipeline calc fix

  vc4:
   - out of bounds fix"

* tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm:
  drm/msm/dsi: Stash away calculated vco frequency on recalc
  drm: Lock pointer access in drm_master_release()
  drm/mcde: Fix off by 10^3 in calculation
  drm/msm/a6xx: avoid shadow NULL reference in failure path
  drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
  drm/msm/a6xx: update/fix CP_PROTECT initialization
  radeon: use memcpy_to/fromio for UVD fw upload
  drm/amd/pm: Fix fall-through warning for Clang
  drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid
  drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB
  drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create
  drm/msm: Init mm_list before accessing it for use_vram path
  drm: Fix use-after-free read in drm_getunique()
  drm/vc4: fix vc4_atomic_commit_tail() logic
  drm/ttm: fix deref of bo->ttm without holding the lock v2
  drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device

Pull devicetree fix from Rob Herring:
 "A single fix for broken media/renesas,drif.yaml binding schema"

* tag 'devicetree-fixes-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  media: dt-bindings: media: renesas,drif: Fix fck definition

Pull MD related fix from Song.

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  async_xor: check src_offs is not NULL before updating it

Pull ACPI fixes from Rafael Wysocki:
 "These revert a problematic recent commit and fix a regression
  introduced during the 5.12 development cycle.

  Specifics:

   - Revert recent commit that attempted to fix the FACS table reference
     counting but introduced a problem with accessing the hardware
     signature after hibernation (Zhang Rui).

   - Fix regression in the _OSC handling that broke the loading of ACPI
     tables on some systems (Mika Westerberg)"

* tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: Pass the same capabilities to the _OSC regardless of the query flag
  Revert "ACPI: sleep: Put the FACS table after using it"