- 13 Aug, 2013 2 commits
-
-
Mark Brown authored
Ensure that the definition of ax88172a_info matches the declaration seen by users and silence sparse warnings about symbols without declarations in the global namespace by moving the declaration into the shared header asix.h. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Brown authored
Make functions that are only referenced from ops structures static, they do not need to be in the global namespace and sparse complains about this. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Aug, 2013 2 commits
-
-
Eric Dumazet authored
commit e370a723 ("af_unix: improve STREAM behavior with fragmented memory") added a bug on large send() because the skb_copy_datagram_from_iovec() call always start from the beginning of iovec. We must instead use the @sent variable to properly skip the already processed part. Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonas Jensen authored
The MOXA UC-711X hardware(s) has an ethernet controller that seem to be developed internally. The IC used is "RTL8201CP". Since there is no public documentation, this driver is mostly the one published by MOXA that has been heavily cleaned up / ported from linux 2.6.9. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Aug, 2013 3 commits
-
-
Eric Dumazet authored
Adding paged frags skbs to af_unix sockets introduced a performance regression on large sends because of additional page allocations, even if each skb could carry at least 100% more payload than before. We can instruct sock_alloc_send_pskb() to attempt high order allocations. Most of the time, it does a single page allocation instead of 8. I added an additional parameter to sock_alloc_send_pskb() to let other users to opt-in for this new feature on followup patches. Tested: Before patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 46861.15 After patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 57981.11 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
unix_stream_sendmsg() currently uses order-2 allocations, and we had numerous reports this can fail. The __GFP_REPEAT flag present in sock_alloc_send_pskb() is not helping. This patch extends the work done in commit eb6a2481 ("af_unix: reduce high order page allocations) for datagram sockets. This opens the possibility of zero copy IO (splice() and friends) The trick is to not use skb_pull() anymore in recvmsg() path, and instead add a @consumed field in UNIXCB() to track amount of already read payload in the skb. There is a performance regression for large sends because of extra page allocations that will be addressed in a follow-up patch, allowing sock_alloc_send_pskb() to attempt high order page allocations. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
Encrypt the cookie with both server and client IPv4 addresses, such that multi-homed server will grant different cookies based on both the source and destination IPs. No client change is needed since cookie is opaque to the client. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Aug, 2013 17 commits
-
-
stephen hemminger authored
callid_sock array is referenced via rcu_dereference and sparse rcu checks complains about address space mismatch. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Andrew Gallatin <gallatin@myri.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: netdev@vger.kernel.org Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit cda5f98e. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
With the restructuring of the lksctp.org site, we only allow bug reports through the SCTP mailing list linux-sctp@vger.kernel.org, not via SF, as SF is only used for web hosting and nothing more. While at it, also remove the obvious statement that bugs will be fixed and incooperated into the kernel. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Get rid of the last module parameter for SCTP and make this configurable via sysctl for SCTP like all the rest of SCTP's configuration knobs. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Manley authored
Adds the new procfs knobs: /proc/sys/net/ipv4/conf/*/igmpv2_unsolicited_report_interval /proc/sys/net/ipv4/conf/*/igmpv3_unsolicited_report_interval Which will allow userspace configuration of the IGMP unsolicited report interval (see below) in milliseconds. The defaults are 10000ms for IGMPv2 and 1000ms for IGMPv3 in accordance with RFC2236 and RFC3376. Background: If an IGMP join packet is lost you will not receive data sent to the multicast group so if no data arrives from that multicast group in a period of time after the IGMP join a second IGMP join will be sent. The delay between joins is the "IGMP Unsolicited Report Interval". Prior to this patch this value was hard coded in the kernel to 10s for IGMPv2 and 1s for IGMPv3. 10s is unsuitable for some use-cases, such as IPTV as it can cause channel change to be slow in the presence of packet loss. This patch allows the value to be overridden from userspace for both IGMPv2 and IGMPv3 such that it can be tuned accoding to the network. Tested with Wireshark and a simple program to join a (non-existent) multicast group. The distribution of timings for the second join differ based upon setting the procfs knobs. igmpvX_unsolicited_report_interval is intended to follow the pattern established by force_igmp_version, and while a procfs entry has been added a corresponding sysctl knob has not as it is my understanding that sysctl is deprecated[1]. [1]: http://lwn.net/Articles/247243/Signed-off-by: William Manley <william.manley@youview.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Manley authored
The procfs knob /proc/sys/net/ipv4/conf/*/force_igmp_version allows the IGMP protocol version to use to be explicitly set. As a side effect this caused the routing cache to be flushed as it was declared as a DEVINET_SYSCTL_FLUSHING_ENTRY. Flushing is unnecessary and this patch makes it so flushing does not occur. Requested by Hannes Frederic Sowa as he was reviewing other patches adding procfs entries. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: William Manley <william.manley@youview.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Manley authored
If an IGMP join packet is lost you will not receive data sent to the multicast group so if no data arrives from that multicast group in a period of time after the IGMP join a second IGMP join will be sent. The delay between joins is the "IGMP Unsolicited Report Interval". Previously this value was hard coded to be chosen randomly between 0-10s. This can be too long for some use-cases, such as IPTV as it can cause channel change to be slow in the presence of packet loss. The value 10s has come from IGMPv2 RFC2236, which was reduced to 1s in IGMPv3 RFC3376. This patch makes the kernel use the 1s value from the later RFC if we are operating in IGMPv3 mode. IGMPv2 behaviour is unaffected. Tested with Wireshark and a simple program to join a (non-existent) multicast group. The distribution of timings for the second join differ based upon setting /proc/sys/net/ipv4/conf/eth0/force_igmp_version. Signed-off-by: William Manley <william.manley@youview.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
nikolay@redhat.com authored
In case of bond_add_vlan() failure currently we'll have the vlan's refcnt bumped up in all slaves, but it will never go down because it failed to get added to the bond, so properly unwind the added vlan if bond_add_vlan fails. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
nikolay@redhat.com authored
Now we have vlan_vids_add/del_by_dev() which serve the same purpose as bond's bond_add/del_vlans_on_slave() with the good side effect of reverting the changes if one of the additions fails. There's only 1 change in the behaviour of enslave: if adding of the vlans to the slave fails, we'll fail the enslaving because otherwise we might delete some vlan that wasn't added by the bonding. The only way this may happen is with ENOMEM currently, so we're in trouble anyway. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
With GRO/LRO processing, there is a problem because Ip[6]InReceives SNMP counters do not count the number of frames, but number of aggregated segments. Its probably too late to change this now. This patch adds four new counters, tracking number of frames, regardless of LRO/GRO, and on a per ECN status basis, for IPv4 and IPv6. Ip[6]NoECTPkts : Number of packets received with NOECT Ip[6]ECT1Pkts : Number of packets received with ECT(1) Ip[6]ECT0Pkts : Number of packets received with ECT(0) Ip[6]CEPkts : Number of packets received with Congestion Experienced lph37:~# nstat | egrep "Pkts|InReceive" IpInReceives 1634137 0.0 Ip6InReceives 3714107 0.0 Ip6InNoECTPkts 19205 0.0 Ip6InECT0Pkts 52651828 0.0 IpExtInNoECTPkts 33630 0.0 IpExtInECT0Pkts 15581379 0.0 IpExtInCEPkts 6 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Aug, 2013 1 commit
-
-
David S. Miller authored
This reverts commits: 0f75b09c cbd89acb c483e026 Amongst other things, it's modifies the SKB header to pull the ethernet headers off via eth_type_trans() on the output path which is bogus. It's causing serious regressions for people. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Aug, 2013 15 commits
-
-
Jingoo Han authored
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/net/phy/mdio-mux-mmioreg.c:51:27: warning: incorrect type in initializer (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:51:27: expected void *p drivers/net/phy/mdio-mux-mmioreg.c:51:27: got void [noderef] <asn:2>* drivers/net/phy/mdio-mux-mmioreg.c:57:21: warning: incorrect type in argument 1 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:57:21: expected void const volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:57:21: got void *p drivers/net/phy/mdio-mux-mmioreg.c:60:25: warning: incorrect type in argument 2 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:60:25: expected void volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:60:25: got void *p drivers/net/phy/mdio-mux-mmioreg.c:64:25: warning: incorrect type in argument 1 (different address spaces) drivers/net/phy/mdio-mux-mmioreg.c:64:25: expected void volatile [noderef] <asn:2>*addr drivers/net/phy/mdio-mux-mmioreg.c:64:25: got void *p Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
ksz8873mll_read_status() is used only in this file. Fix the following sparse warning: drivers/net/phy/micrel.c:147:5: warning: symbol 'ksz8873mll_read_status' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Use skb_copy_datagram_from_iovec() to avoid code duplication and make it easy to be read. Also we can do the skipping inside the zero-copy loop. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
To reduce the duplicated codes. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
To let it be reused and reduce code duplication. Also document this function. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
To let it be reused and reduce code duplication. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The IP tunnel hash heads can be embedded in the per-net structure since it is a fixed size. Reduce the size so that the total structure fits in a page size. The original size was overly large, even NETDEV_HASHBITS is only 8 bits! Also, add some white space for readability. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Pravin B Shelar <pshelar@nicira.com>. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
and update copyright year. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
WoL and power state changes will now be done in the shutdown handler. open/close/ethtool will no longer change the power state. NVRAM operations can now be permitted whether the device is up or down. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
This simplifies the suspend/resume code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Separate MAC and PHY WoL setup code into a separate function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Simple API changes with no functional changes. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
by closing the device if necessary. Otherwise, since NAPI state is already disabled, a subsequent close will hang the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-