Fix NULL pointer dereference in ptp_clock_register. The argument
"parent" of ptp_clock_register may be NULL pointer.

Fixes: 73f37068 ("ptp: support ptp physical/virtual clocks conversion")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment
routine even if the fragment contains only the ethernet FCS.

Fixes: 039fbc47 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an UDP packet enters the GRO engine but is not eligible
for aggregation and is not targeting an UDP tunnel,
udp_gro_receive() will not set the flush bit, and packet
could delayed till the next napi flush.

Fix the issue ensuring non GROed packets traverse
skb_gro_flush_final().
Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de>
Fixes: 18f25dc3 ("udp: skip L4 aggregation for UDP tunnel packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dacce2be ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the inner
offload capability is to be restricted to UDP tunnels with default
Vxlan and Geneve ports.

This patch fixes the issue for tunnels with non-default ports using
features check capability and filtering appropriate features for such
tunnels.

Fixes: dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
small tc conntrack fixes

Louis Peens says:

The first patch makes sure that any callbacks registered to
the ct->nf_tables table are cleaned up before freeing.

The second patch removes what was effectively a workaround
in the nfp driver because of the missing cleanup in patch 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current location of the callback delete can lead to a race
condition where deleting the callback requires a write_lock on
the nf_table, but at the same time another thread from netfilter
could have taken a read lock on the table before trying to offload.
Since the driver is taking a rtnl_lock this can lead into a deadlock
situation, where the netfilter offload will wait for the cls_flower
rtnl_lock to be released, but this cannot happen since this is
waiting for the nf_table read_lock to be released before it can
delete the callback.

Solve this by completely removing the nf_flow_table_offload_del_cb
call, as this will now be cleaned up by act_ct itself when cleaning
up the specific nf_table.

Fixes: 62268e78 ("nfp: flower-ct: add nft callback stubs")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work
there is no guarantee that the callback list, added to by
nf_flow_table_offload_add_cb, is empty. This means that it is
possible that the flow_block_cb memory allocated will be lost.

Fix this by iterating the list and freeing the flow_block_cb entries
before freeing the nf_table entry (via freeing ct_ft).

Fixes: 978703f4 ("netfilter: flowtable: Add API for registering to flow table events")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 2796d0c6 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.

Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.

Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.

Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some tests are failing, John bisected the issue to a recent commit.

sock_set_timestamp() parameters should be :

1) sk
2) optname
3) valbool

Fixes: 371087aa ("sock: expose so_timestamp options for mptcp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.

Fixes: 563d34d0 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The confirm operation should be checked. If there are any failed,
the packet should be dropped like in ovs and netfilter.

Fixes: b57dc7c1 ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The prefetch is incorrectly using the dma address instead of the virtual
address.

It's supposed to be:
prefetch((char *)buf_state->page_info.page_address +
	 buf_state->page_info.page_offset)

However, after correcting this mistake, there is no evidence of
performance improvement.

Fixes: 9b8dd5e5 ("gve: DQO: Add RX path")
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.

Fixes: 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I have checked that the IEEE standard 802.1Q-2018 section 8.6.9.4.5
is called AdminGateStates.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

Add a wrapping struct to serve as the memcpy() source so the compiler
can perform appropriate bounds checking, avoiding this future warning:

In function '__fortify_memcpy',
    inlined from 'iucv_message_pending' at net/iucv/iucv.c:1663:4:
./include/linux/fortify-string.h:246:4: error: call to '__read_overflow2_field' declared with attribute error: detected read beyond size of field (2nd parameter)
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If 'gve_probe()' fails, we should propagate the error code, instead of
hard coding a -ENXIO value.
Make sure that all error handling paths set a correct value for 'err'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the 'register_netdev() call fails, we must release the resources
allocated by the previous 'gve_init_priv()' call, as already done in the
remove function.

Add a new label and the missing 'gve_teardown_priv_resources()' in the
error handling path.

Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-07-01

This series contains updates to igb, igc, ixgbe, e1000e, fm10k, and iavf
drivers.

Vinicius fixes a use-after-free issue present in igc and igb.

Tom Rix fixes the return value for igc_read_phy_reg() when the
operation is not supported for igc.

Christophe Jaillet fixes unrolling of PCIe error reporting for ixgbe,
igc, igb, fm10k, e10000e, and iavf.

Alex ensures that q_vector array is not accessed beyond its bounds for
igb.

Jedrzej moves ring assignment to occur after bounds have been checked in
igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add stmmac_fpe_stop_wq() in stmmac_suspend() to terminate FPE workqueue
during suspend. So, in suspend mode, there will be no FPE workqueue
available. Without this fix, new additional FPE workqueue will be created
in every suspend->resume cycle.

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geert Uytterhoeven says:

====================
sms911x: DTS fixes and DT binding to json-schema conversion

This patch series converts the Smart Mixed-Signal Connectivity (SMSC)
LAN911x/912x Controller Device Tree binding documentation to
json-schema, after fixing a few issues in DTS files.

Changed compared to v1[1]:
  - Dropped applied patches,
  - Add Reviewed-by,
  - Drop bogus double quotes in compatible values,
  - Add comment explaining why "additionalProperties: true" is needed.

[1] [PATCH 0/5] sms911x: DTS fixes and DT binding to json-schema conversion
    https://lore.kernel.org/r/cover.1621518686.git.geert+renesas@glider.be
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x
Controller Device Tree binding documentation to json-schema.

Document missing properties.
Make "phy-mode" not required, as many DTS files do not have it, and the
Linux drivers falls back to PHY_INTERFACE_MODE_NA.
Correct nodename in example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

make dtbs_check:

    ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
    ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'

There is no "smsc,irq-active-low" property, as active low is the
default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Accesses to unix_sk(sk)->gso_size are lockless.
Add READ_ONCE()/WRITE_ONCE() around them.

BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg

write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1:
 udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696
 udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630
 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265
 __sys_setsockopt+0x18f/0x200 net/socket.c:2104
 __do_sys_setsockopt net/socket.c:2115 [inline]
 __se_sys_setsockopt net/socket.c:2112 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0:
 udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2337
 ___sys_sendmsg net/socket.c:2391 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2477
 __do_sys_sendmmsg net/socket.c:2506 [inline]
 __se_sys_sendmmsg net/socket.c:2503 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000 -> 0x0005

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MPTCP receive path is hooked only into the TCP slow-path.
The DSS presence allows plain MPTCP traffic to hit that
consistently.

Since commit e1ff9e82 ("net: mptcp: improve fallback to TCP"),
when an MPTCP socket falls back to TCP, it can hit the TCP receive
fast-path, and delay or stop triggering the event notification.

Address the issue explicitly disabling the header prediction
for MPTCP sockets.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200
Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get,
but this symbol is not provided anywhere in the kernel tree.  Remove
this driver given that it is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

kernel-doc for TIPC is too simple, we need to add more information for it.

This patch is to extend the abstract, and add the Features and Links items.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Normally, if a reset fails due to failover or other communication error
there is another reset (eg: FAILOVER) in the queue and we would process
that reset. But if we are unable to communicate with PHYP or VIOS after
H_FREE_CRQ, there would be no other resets in the queue and the adapter
would be in an undefined state even though it was in the OPEN state
earlier. While starting the reset we set the carrier to off state so
we won't even get the timeout resets.

If the last queued reset fails, retry it as a hard reset (after the
usual 60 second settling time).
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yangbo Lu says:

====================
ptp: support virtual clocks and timestamping

Current PTP driver exposes one PTP device to user which binds network
interface/interfaces to provide timestamping. Actually we have a way
utilizing timecounter/cyclecounter to virtualize any number of PTP
clocks based on a same free running physical clock for using.
The purpose of having multiple PTP virtual clocks is for user space
to directly/easily use them for multiple domains synchronization.

user
space:     ^                                  ^
           | SO_TIMESTAMPING new flag:        | Packets with
           | SOF_TIMESTAMPING_BIND_PHC        | TX/RX HW timestamps
           v                                  v
         +--------------------------------------------+
sock:    |     sock (new member sk_bind_phc)          |
         +--------------------------------------------+
           ^                                  ^
           | ethtool_get_phc_vclocks          | Convert HW timestamps
           |                                  | to sk_bind_phc
           v                                  v
         +--------------+--------------+--------------+
vclock:  | ptp1         | ptp2         | ptpN         |
         +--------------+--------------+--------------+
pclock:  |             ptp0 free running              |
         +--------------------------------------------+

The block diagram may explain how it works. Besides the PTP virtual
clocks, the packet HW timestamp converting to the bound PHC is also
done in sock driver. For user space, PTP virtual clocks can be
created via sysfs, and extended SO_TIMESTAMPING API (new flag
SOF_TIMESTAMPING_BIND_PHC) can be used to bind one PTP virtual clock
for timestamping.

The test tool timestamping.c (together with linuxptp phc_ctl tool) can
be used to verify:

  # echo 4 > /sys/class/ptp/ptp0/n_vclocks
  [  129.399472] ptp ptp0: new virtual clock ptp2
  [  129.404234] ptp ptp0: new virtual clock ptp3
  [  129.409532] ptp ptp0: new virtual clock ptp4
  [  129.413942] ptp ptp0: new virtual clock ptp5
  [  129.418257] ptp ptp0: guarantee physical clock free running
  #
  # phc_ctl /dev/ptp2 set 10000
  # phc_ctl /dev/ptp3 set 20000
  #
  # timestamping eno0 2 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC
  # timestamping eno0 2 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC
  # timestamping eno0 3 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC
  # timestamping eno0 3 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC

Changes for v2:
	- Converted to num_vclocks for creating virtual clocks.
	- Guranteed physical clock free running when using virtual
	  clocks.
	- Fixed build warning.
	- Updated copyright.
Changes for v3:
	- Supported PTP virtual clock in default in PTP driver.
	- Protected concurrency of ptp->num_vclocks accessing.
	- Supported PHC vclocks query via ethtool.
	- Extended SO_TIMESTAMPING API for PHC binding.
	- Converted HW timestamps to PHC bound, instead of previous
	  binding domain value to PHC idea.
	- Other minor fixes.
Changes for v4:
	- Used do_aux_work callback for vclock refreshing instead.
	- Used unsigned int for vclocks number, and max_vclocks
	  for limitiation.
	- Fixed mutex locking.
	- Dynamically allocated memory for vclock index storage.
	- Removed ethtool ioctl command for vclocks getting.
	- Updated doc for ethtool phc vclocks get.
	- Converted to mptcp_setsockopt_sol_socket_timestamping().
	- Passed so_timestamping for sock_set_timestamping.
	- Fixed checkpatch/build.
	- Other minor fixed.
Changes for v5:
	- Fixed checkpatch/build/bug reported by test robot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add entry for PTP virtual clock driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support binding PHC of PTP vclock for timestamping.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to support hardware timestamp conversion to
PHC bound. This applies to both RX and TX since their skb
handling (for TX, it's skb clone in error queue) all goes
through __sock_recv_timestamp.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.

This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.

This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split timestamping handling into a new function
mptcp_setsockopt_sol_socket_timestamping().
This is preparation for extending SO_TIMESTAMPING
for PHC binding, since optval will no longer be
integer.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add kernel API ptp_convert_timestamp() to convert raw hardware timestamp
to a specified ptp vclock time.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an interface for getting PHC (PTP Hardware Clock)
virtual clocks, which are based on PHC physical clock
providing hardware timestamp to network packets.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add kernel API ptp_get_vclocks_index() to get all ptp
vclocks index on pclock.

This is preparation for supporting ptp vclocks info query
through ethtool.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Track available ptp vclocks information. Record index values
of available ptp vclocks during registering and unregistering.

This is preparation for supporting ptp vclocks info query
through ethtool.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support ptp physical/virtual clocks conversion via sysfs.
There will be a new attribute n_vclocks under ptp physical
clock sysfs.

- In default, the value is 0 meaning only ptp physical clock
  is in use.
- Setting the value can create corresponding number of ptp
  virtual clocks to use. But current physical clock is guaranteed
  to stay free running.
- Setting the value back to 0 can delete virtual clocks and back
  use physical clock again.

Another new attribute max_vclocks control the maximum number of
ptp vclocks.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add ptp virtual clock driver framework
utilizing timecounter/cyclecounter.

The patch just exports two essential APIs for PTP driver.

- ptp_vclock_register()
- ptp_vclock_unregister()
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>