- 30 May, 2007 7 commits
-
-
Stephen Hemminger authored
Driver was not correctly setting up transmit descriptor when doing VLAN tag insertion with checksum offload. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
This code inherited from the sk98lin driver is incorrect on the Yukon2. The GPHY_CTRL register values are specific to the internal PHY of the chip and the values used were leftovers. Driver was setting bit 13 which is now the INT polarity for the PHY! Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
Matt Mackall authored
Add data from zero-entropy random_writes directly to output pools to avoid accounting difficulties on machines without entropy sources. Tested on lguest with all entropy sources disabled. Signed-off-by: Matt Mackall <mpm@selenic.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Mackall authored
Fix cast error in entropy extraction. Add comments explaining the magic 16. Remove extra confusing loop variable. Signed-off-by: Matt Mackall <mpm@selenic.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix last allocated object tracking in bitmap allocator IB/cm: Fix stale connection detection IPoIB/cm: Fix performance regression on Mellanox IB/mthca: Fix handling of send CQE with error for QPs connected to SRQ
-
Thomas Gleixner authored
get_next_timer_interrupt() returns a delta of (LONG_MAX > 1) in case there is no timer pending. On 64 bit machines this results in a multiplication overflow in tick_nohz_stop_sched_tick(). Reported by: Dave Miller <davem@davemloft.net> Make the return value a constant and limit the return value to a 32 bit value. When the max timeout value is returned, we can safely stop the tick timer device. The max jiffies delta results in a 12 days timeout for HZ=1000. In the long term the get_next_timer_interrupt() code needs to be reworked to return ktime instead of jiffies, but we have to wait until the last users of the original NO_IDLE_HZ code are converted. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 May, 2007 33 commits
-
-
Roland Dreier authored
Set last allocated object to the object after the one just allocated before ORing in the extra top bits. Also handle the case where this wraps around. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Sean Hefty authored
The ib_cm can incorrectly detect a stale connection (a new connection request for a QPN that is already connected) as a duplicate connection request. Separate the handling of potential duplicate REQs from stale connections. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
commit 518b1646 ("IPoIB/cm: Fix SRQ WR leak") introduced a severe performance regression on Mellanox cards, because keeping a QP in the error state for extended periods of time moves hardware to the slow path (until the QP is destroyed). For example, MPI latency goes from ~3 usecs to ~7 usecs. Fix this by posting a send WR on one of the QPs that are being flushed, instead of using a separate drain QP that is kept in the error state. This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=636>, reported and bisected by Scott Weitzenkamp at Cisco and debugged by Sasha Mikheev at Voltaire. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
mthca_free_err_wqe() currently treats both send and receive CQEs identically if a QP is using an SRQ. But for Tavor hardware, send CQEs with error can be chained together even if the RQ is part of SRQ, so we may miss some CQEs. Fix by following the WQE chain for all send CQEs even for non-SRQ QPs. This fixes crashes in IPoIB CM: <https://bugs.openfabrics.org//show_bug.cgi?id=604> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fill holes in hypervisor APIs and fix KTSB registry. [SPARC64]: Fix two bugs wrt. kernel 4MB TSB. [SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM. [SPARC]: Emulate cmpxchg like parisc [SPARC64]: Fix _PAGE_EXEC_4U check in sun4u I-TLB miss handler. [SPARC]: Linux always started with 9600 8N1 [SPARC64]: arch/sparc64/time.c doesn't compile on Ultra 1 (no PCI) [SPARC64]: Eliminate NR_CPUS limitations. [SPARC64]: Use machine description and OBP properly for cpu probing. [SPARC64]: Negotiate hypervisor API for PCI services. [SPARC64]: Report proper system soft state to the hypervisor. [SPARC64]: Fix typo in sun4v_hvapi_register error handling. [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp [SCSI] jazz_esp: Converted to use esp_core. [SPARC64]: PCI device scan is way too verbose by default. [SERIAL] sunzilog: section mismatch fix [SPARC32]: Removes mismatch section warnigs in sparc time.c file [SPARC64]: Don't be picky about virtual-dma values on sun4v. [SPARC64]: Kill unused DIE_PAGE_FAULT enum value. [SCSI] pluto: Use wait_for_completion_timeout.
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fix return code firewire: prefix modules with firewire- instead of fw- firewire: Add missing byteswapping for receive DMA programs. ieee1394: raw1394: Fix async send ieee1394: eth1394: bring back a parent device ieee1394: eth1394: handle tlabel exhaustion ieee1394: eth1394: remove bogus netif_wake_queue ieee1394: sbp2: include workqueue.h
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon/applesmc: Handle name file creation error and deletion hwmon/applesmc: Simplify dependencies hwmon-vid: Don't spam the logs when VRM version is missing hwmon/w83627hf: Be quiet when no chip is found hwmon/coretemp: Add more safety checks hwmon/ds1621: Fix swapped temperature limits
-
Linus Torvalds authored
* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix Kconfig warning [PPC] Fix modpost warning [POWERPC] Fix modpost warning [POWERPC] Fix Section mismatch warnings [POWERPC] QE: fix Kconfig 'select' warning with UCC_FAST [POWERPC] 52xx: unbreak lite5200 dts (_pic vs. -pic) [PPC] Remove duplicate export of __div64_32. [PPC] Fix COMMON symbol warnings
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] megaraid_sas: intercept cmd timeout and throttle io [SCSI] fusion: Fix |/|| confusion [SCSI] aic94xx: asd_clear_nexus should fail if the cleared task does not complete [SCSI] aic7xxx: fix aicasm build failure with gcc-3.4.6 [SCSI] aacraid: apply commit config for reset_devices flag [SCSI] sd: fix refcounting regression in suspend/resume routines [SCSI] aacraid: fix panic on short Inquiry [SCSI] aacraid: Correct sa platform support. (Was: [Bug 8469] Bad EIP value on pentium3 SMP kernel-2.6.21.1) [SCSI] NCR53C9x: correct spelling mistake in deprecation notice [SCSI] tgt: fix a rdma indirect transfer error bug [SCSI] MegaRAID: Update MAINTAINERS email-id [SCSI] stex: minor cleanup and version update [SCSI] stex: fix reset recovery for console device [SCSI] stex: extend hard reset wait time [SCSI] stex: fix id mapping issue [SCSI] ipr: Proper return codes for eh_dev_reset for SATA devices [SCSI] zfcp: IO stall after deleting and path checker changes after reenabling zfcp devices [SCSI] zfcp: avoid clutter in erp_dbf
-
Alan Stern authored
This patch (as912) replaces a couple of calls to flush_workqueue() with cancel_sync_work() and cancel_rearming_delayed_work(). Using a more directed approach allows us to avoid some nasty deadlocks. The prime example occurs when a first-level device (the parent is a root hub) is removed while at the same time the root hub gets a remote wakeup request. khubd would try to flush the autosuspend workqueue while holding the root-hub's lock, and the remote-wakeup workqueue routine would be waiting to lock the root hub. The patch also reorganizes the power management portion of usb_disconnect(), separating it out into its own routine. The autosuspend workqueue entry is cancelled immediately instead of waiting for the device's release routine. In addition, synchronization with the autosuspend thread is carried out even for root hubs (an oversight in the original code). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Cc: Mark Lord <lkml@rtr.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Brandon Craig Rhodes authored
When hostap_tx_encrypt() tries to allocate enough headroom and tailroom for ieee80211 encryption, it only makes enough room for the "mpdu" phase of the operation, but forgets about the "msdu" phase. (For TKIP, these two phases require, respectively, 4 and 8 bytes of tailroom, per the "ieee80211_crypt_tkip" structure at the bottom of net/ieee80211/ieee80211_crypt_tkip.c.) Signed-off-by: Brandon Craig Rhodes <brandon@rhodesmill.org> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Akinobu Mita authored
This patch adds missing NULL check and trims a line longer than 80 columns. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joe Jezak <josejx@gentoo.org> Cc: Daniel Drake <dsd@gentoo.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Akinobu Mita authored
Fix error message: Unable to network device. --> Unable to allocate network device. Cc: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Björn Steinbrink authored
Manually set the device of a skb for prism54 cards that are in monitor mode as we never call eth_type_trans in that case. Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David S. Miller authored
Several interfaces were missing and others misnumbered or improperly documented. Also, make sure to check the return value when registering the kernel TSBs with the hypervisor. This helped to find the 4MB kernel TSB alignment bug fixed in a previous changeset. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
1) The TSB lookup was not using the correct hash mask. 2) It was not aligned on a boundary equal to it's size, which is required by the sun4v Hypervisor. wasn't having it's return value checked, and that bug will be fixed up as well in a subsequent changeset. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Habets authored
The DRM code depends on an atomic version of cmpxchg(), which is not available on sparc32. Since other platforms besides sparc32 have this issue a KCONFIG option is added for it. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kyle McMartin authored
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
It was using an immediate _PAGE_EXEC_4U value in an 'and' instruction to perform the test. This doesn't work because the immediate field is signed 13-bit, this the mask being tested against the PTE was 0x1000 sign-extended to 32-bits instead of just plain 0x1000. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
The Linux kernel ignored the PROM's serial settings (115200,n,8,1 in my case). This was because mode_prop remained "ttyX-mode" (expected: "ttya-mode") due to the constness of string literals when used with "char *". Since there is no "ttyX-mode" property in the PROM, Linux always used the default 9600. [ Investigation of the suncore.s assembler reveals that gcc optimizied away the stores, yet did not emit a warning, which is a pretty anti-social thing to do and is the only reason this bug lived for so long -DaveM ] Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Horst H. von Brand authored
This is bug 8540 on bugzilla.kernel.org arch/sparc64/time.c contains references to assorted bq4802 stuff if CONFIG_PCI is not set, and compile fails. I #ifdef'ed out everything that looks PCI-ish in that file. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Cheetah systems can have cpuids as large as 1023, although physical systems don't have that many cpus. Only three limitations existed in the kernel preventing arbitrary NR_CPUS values: 1) dcache dirty cpu state stored in page->flags on D-cache aliasing platforms. With some build time calculations and some build-time BUG checks on page->flags layout, this one was easily solved. 2) The cheetah XCALL delivery code could only handle a cpumask with up to 32 cpus set. Some simple looping logic clears that up too. 3) thread_info->cpu was a u8, easily changed to a u16. There are a few spots in the kernel that still put NR_CPUS sized arrays on the kernel stack, but that's not a sparc64 specific problem. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Bogendoerfer authored
Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
These messages were very useful when bringing up the OBP based PCI device scan code, but it's just a lot of noise every bootup now especially on big machines. The messages can be re-enabled via 'ofpci_debug=1' on the kernel command line. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Helt authored
This patch fixes section mismatch warnings in the sunzilog driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Helt authored
This patch removes mismatch section warnings in the sparc/kernel/time.c file. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Handle arbitrary base and length values as long as they are multiples of IO_PAGE_SIZE. Bug found by Arun Kumar Rao. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
sparc64 got rid of the pagefault notifiers, so the enum value for them can go away aswell. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-