The optional variants for the gpiod_get() family of functions return NULL
if the GPIO in question is not associated with this device. They return
ERR_PTR() on any other error. NULL descriptors are graciously handled by
GPIOLIB and can be safely passed to any of the GPIO consumer interfaces
as they will return 0 and act as if the function succeeded. If one is
using the optional variant, then there's no point in checking for NULL.

Fixes: 68456671 ("Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Firmware sequencer (FSEQ) is a common code shared across Bluetooth
and Wifi. Printing FSEQ will help to debug if there is any mismatch
between Bluetooth and Wifi FSEQ.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

While waiting for hci_dev_lock the hci_conn object may be cleanup
causing the following trace:

BUG: KASAN: slab-use-after-free in hci_connect_le_scan_cleanup+0x29/0x350
Read of size 8 at addr ffff888001a50a30 by task kworker/u3:1/111

CPU: 0 PID: 111 Comm: kworker/u3:1 Not tainted
6.8.0-rc2-00701-g8179b15ab3fd-dirty #6418
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38
04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x21/0x70
 print_report+0xce/0x620
 ? preempt_count_sub+0x13/0xc0
 ? __virt_addr_valid+0x15f/0x310
 ? hci_connect_le_scan_cleanup+0x29/0x350
 kasan_report+0xdf/0x110
 ? hci_connect_le_scan_cleanup+0x29/0x350
 hci_connect_le_scan_cleanup+0x29/0x350
 create_le_conn_complete+0x25c/0x2c0

Fixes: 881559af ("Bluetooth: hci_sync: Attempt to dequeue connection attempt")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Fixes the following trace where hci_acl_create_conn_sync attempts to
call hci_abort_conn_sync after timeout:

BUG: KASAN: slab-use-after-free in hci_abort_conn_sync
(net/bluetooth/hci_sync.c:5439)
Read of size 2 at addr ffff88800322c032 by task kworker/u3:2/36

Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38
04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:26
./arch/x86/include/asm/irqflags.h:67 ./arch/x86/include/asm/irqflags.h:127
lib/dump_stack.c:107)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:488)
? preempt_count_sub (kernel/sched/core.c:5889)
? __virt_addr_valid (./arch/x86/include/asm/preempt.h:103 (discriminator 1)
./include/linux/rcupdate.h:865 (discriminator 1)
./include/linux/mmzone.h:2026 (discriminator 1)
arch/x86/mm/physaddr.c:65 (discriminator 1))
? hci_abort_conn_sync (net/bluetooth/hci_sync.c:5439)
kasan_report (mm/kasan/report.c:603)
? hci_abort_conn_sync (net/bluetooth/hci_sync.c:5439)
hci_abort_conn_sync (net/bluetooth/hci_sync.c:5439)
? __pfx_hci_abort_conn_sync (net/bluetooth/hci_sync.c:5433)
hci_acl_create_conn_sync (net/bluetooth/hci_sync.c:6681)

Fixes: 45340097 ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Since commit aed65af1 ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the bt_type and
bnep_type variables to be constant structures as well, placing it into
read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use devm_kstrdup() instead of hand-writing it.
It is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use strreplace() instead of hand-writing it.
It is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds functions to queue, dequeue and lookup into the cmd_sync
list.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the UAF on __hci_acl_create_connection_sync caused by
connection abortion, it uses the same logic as to LE_LINK which uses
hci_cmd_sync_cancel to prevent the callback to run if the connection is
abort prematurely.

Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com
Fixes: 45340097 ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This aligns the use socket sk_timeo as conn_timeout when initiating a
connection and then use it when scheduling the resulting HCI command,
that way the command is actually aborted synchronously thus not
blocking commands generated by hci_abort_conn_sync to inform the
controller the connection is to be aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Commit cec9f3c5561d ("Bluetooth: Remove BT_HS") removes config BT_HS, but
misses two "ifdef BT_HS" blocks in hci_event.c.

Remove this dead code from this removed config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.

hci_conn_check_pending() was used to trigger this retry, we can remove it
now.

Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.

This is somewhat reverting commit 4c67bc74 ("[Bluetooth] Support
concurrent connect requests").

With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.

With commit 4c67bc74 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.

This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).

We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.

This is very similar to what we're already doing for establishing LE
connections, and it works well there.

Note that this causes a test failure in mgmt-tester (test "Pair Device
- Power off 1") because the hci_abort_conn_sync() changes the error we
return on timeout of the "Create Connection". We'll fix this on the
mgmt-tester side by adjusting the expected error for the test.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

BIG Sync (aka. Broadcast sink) requires to inform that the device is
connected when a data path is active otherwise userspace could attempt
to free resources allocated to the device object while scanning.

Fixes: 1d11d70d ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377 ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If hci_cmd_sync_complete() is triggered and skb is NULL, then
hdev->req_skb is NULL, which will cause this issue.

Reported-and-tested-by: syzbot+830d9e3fa61968246abd@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add VID 13d3 & PID 3602 for MediaTek MT7925 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3602 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Ulrik Strid <ulrik@strid.tech>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If command has timed out call __hci_cmd_sync_cancel to notify the
hci_req since it will inevitably cause a timeout.

This also rework the code around __hci_cmd_sync_cancel since it was
wrongly assuming it needs to cancel timer as well, but sometimes the
timers have not been started or in fact they already had timed out in
which case they don't need to be cancel yet again.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

We have error defines already, so let's use them.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The "pending connections" feature was originally introduced with commit
4c67bc74 ("[Bluetooth] Support concurrent connect requests") and
6bd57416 ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975 ("Bluetooth: Cancel Inquiry before
Create Connection").

With commit a9de9248 ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.

This refactoring commit also snuck in two more calls to
hci_conn_check_pending():

- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".

- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.

Fixes: a9de9248 ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

On a lot of platforms (at least the MS Surface devices, M1 macbooks, and
a few ThinkPads) firmware doesn't do its job when rfkilling a device
and the bluetooth adapter is not actually shut down properly on rfkill.
This leads to connected devices remaining in connected state and the
bluetooth connection eventually timing out after rfkilling an adapter.

Use the rfkill hook in the HCI driver to go through the full power-off
sequence (including stopping scans and disconnecting devices) before
rfkilling it, just like MGMT_OP_SET_POWERED would do.

In case anything during the larger power-off sequence fails, make sure
the device is still closed and the rfkill ends up being effective in
the end.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add a new state HCI_POWERING_DOWN that indicates that the device is
currently powering down, this will be useful for the next commit.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Queuing of power_off work was introduced in these functions with commits
8b064a3a ("Bluetooth: Clean up HCI state when doing power off") and
c9910d0f ("Bluetooth: Fix disconnecting connections in non-connected
states") in an effort to clean up state and do things like disconnecting
devices before actually powering off the device.

After that, commit a3172b7e ("Bluetooth: Add timer to force power off")
introduced a timeout to ensure that the device actually got powered off,
even if some of the cleanup work would never complete.

This code later got refactored with commit cf75ad8b ("Bluetooth:
hci_sync: Convert MGMT_SET_POWERED"), which made powering off the device
synchronous and removed the need for initiating the power_off work from
other places. The timeout mentioned above got removed too, because we now
also made use of the command timeout during power on/off.

These days the power_off work still exists, but it only seems to only be
used for HCI_AUTO_OFF functionality, which is why we never noticed
those two leftover places where we queue power_off work. So let's remove
that code.

Fixes: cf75ad8b ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

With commit cf75ad8b ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED"),
the power off sequence got refactored so that this timeout was no longer
necessary, let's remove the leftover define from the header too.

Fixes: cf75ad8b ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.

Test procedure using bash script:
<load btnxpuart.ko>
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
    hciconfig hci0 leadv
    sleep 2
    hciconfig hci0 noleadv
    sleep 2
done

Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
Can't set advertise mode on hci0: Connection timed out (110)
Bluetooth: hci0: command 0x200a tx timeout

When the power save mechanism turns on UART break, and btnxpuart_tx_work()
is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE,
which prevents the psdata->work from being scheduled, which is responsible
to turn OFF UART break.

This issue is fixed by adding a ps_lock mutex around UART break on/off as
well as around ps_state read/write.
btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is
PS_STATE_SLEEP, it will first schedule psdata->work, and then it will
reschedule itself once UART break has been turned off and ps_state is
PS_STATE_AWAKE.

Tested above script for 50,000 iterations and TX timeout error was not
observed anymore.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add the support for RTL8852BT/RTL8852BE-VT BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  8 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=8520 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.

This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tools: ynl: add --dbg-small-recv for easier kernel testing

When testing netlink dumps I usually hack some user space up
to constrain its user space buffer size (iproute2, ethtool or ynl).
Netlink will try to fill the messages up, so since these apps use
large buffers by default, the dumps are rarely fragmented.

I was hoping to figure out a way to create a selftest for dump
testing, but so far I have no idea how to do that in a useful
and generic way.

Until someone does that, make manual dump testing easier with YNL.
Create a special option for limiting the buffer size, so I don't
have to make the same edits each time, and maybe others will benefit,
too :)

Example:

  $ ./cli.py [...] --dbg-small-recv >/dev/null
  Recv: read 3712 bytes, 29 messages
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
    [...]
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
  Recv: read 3968 bytes, 31 messages
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
    [...]
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
  Recv: read 532 bytes, 5 messages
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
    [...]
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
     nl_len = 20 (4) nl_flags = 0x2 nl_type = 3

Now let's make the DONE not fit in the last message:

  $ ./cli.py [...] --dbg-small-recv 4499 >/dev/null
  Recv: read 3712 bytes, 29 messages
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
    [...]
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
  Recv: read 4480 bytes, 35 messages
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
    [...]
     nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
  Recv: read 20 bytes, 1 messages
     nl_len = 20 (4) nl_flags = 0x2 nl_type = 3

A real test would also have to check the messages are complete
and not duplicated. That part has to be done manually right now.

Note that the first message is always conservatively sized by the kernel.
Still, I think this is good enough to be useful.

v2:
 - patch 2:
   - move the recv_size setting up
   - change the default to 0 so that cli.py doesn't have to worry
     what the "unset" value is
v1: https://lore.kernel.org/all/20240301230542.116823-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Most "production" netlink clients use large buffers to
make dump efficient, which means that handling of dump
continuation in the kernel is not very well tested.

Add an option for debugging / testing handling of dumps.
It enables printing of extra netlink-level debug and
lowers the recv() buffer size in one go. When used
without any argument (--dbg-small-recv) it picks
a very small default (4000), explicit size can be set,
too (--dbg-small-recv 5000).

Example:

$ ./cli.py [...] --dbg-small-recv
Recv: read 3712 bytes, 29 messages
   nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
 [...]
   nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
   nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
 [...]
   nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
   nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
 [...]
   nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
   nl_len = 20 (4) nl_flags = 0x2 nl_type = 3

(the [...] are edits to shorten the commit message).

Note that the first message of the dump is sized conservatively
by the kernel.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tools: ynl: clean up make clean

First change renames the clean target which removes build results,
to a more common name. Second one add missing .PHONY targets.
Third one ensures that clean deletes __pycache__.

v2: add patch 2
v1: https://lore.kernel.org/all/20240301235609.147572-1-kuba@kernel.org/

====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-04 (ice)

This series contains updates to ice driver only.

Jake changes the driver to use relative VSI index for VF VSIs as the VF
driver has no direct use of the VSI number on ice hardware. He also
reworks some Tx/Rx functions to clarify their uses, cleans up some style
issues, and utilizes kernel helper functions.

Maciej removes a redundant call to disable Tx queues on ifdown and
removes some unnecessary devm usages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Niklas Söderlund says:

====================
ravb: Align Rx descriptor setup and maintenance

When RZ/G2L support was added the Rx code path was split in two, one to
support R-Car and one to support RZ/G2L. One reason for this is that
R-Car uses the extended Rx descriptor format, while RZ/G2L uses the
normal descriptor format.

In many aspects this is not needed as the extended descriptor format is
just a normal descriptor with extra metadata (timestamsp) appended. And
the R-Car SoCs can also use normal descriptors if hardware timestamps
were not desired. This split has led to RZ/G2L gaining support for
split descriptors in the Rx path while R-Car still lacks this.

This series is the first step in trying to merge the R-Car and RZ/G2L Rx
paths so features and bugs corrected in one will benefit the other.

The first patch in the series clarifies that the driver now supports
either normal or extended descriptors, not both at the same time by
grouping them in a union. This is the foundation that later patches will
build on the aligning the two Rx paths.

Patches 2-5 deals with correcting small issues in the Rx frame and
descriptor sizes that either were incorrect at the time they were added
in 2017 (my bad) or concepts built on-top of this initial incorrect
design.

While finally patch 6 merges the R-Car and RZ/G2L for Rx descriptor
setup and maintenance.

When this work has landed I plan to follow up with more work aligning
the rest of the Rx code paths and hopefully bring split descriptor
support to the R-Car SoCs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>