- 23 Mar, 2019 40 commits
-
-
Gustavo A. R. Silva authored
commit e2477233 upstream. Fix boolean expressions by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 4fa084af ("ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> [krzk: Fix -Wparentheses warning] Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit 9bf3d3c4 upstream. Today's message is useless: [ 42.253267] Kernel stack overflow in process (ptrval), r1=c65500b0 This patch fixes it: [ 66.905235] Kernel stack overflow in process sh[356], r1=c65560b0 Fixes: ad67b74d ("printk: hash addresses printed with %p") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Use task_pid_nr()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Christophe Leroy authored
commit 0bbea75c upstream. Looks like book3s/32 doesn't set RI on machine check, so checking RI before calling die() will always be fatal allthought this is not an issue in most cases. Fixes: b96672dd ("powerpc: Machine check interrupt is a non-maskable interrupt") Fixes: daf00ae7 ("powerpc/traps: restore recoverability of machine_check interrupts") Signed-off-by:
-
Aneesh Kumar K.V authored
commit 35f2806b upstream. We added runtime allocation of 16G pages in commit 4ae279c2 ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") That was done to enable 16G allocation on PowerNV and KVM config. In case of KVM config, we mostly would have the entire guest RAM backed by 16G hugetlb pages for this to work. PAPR do support partial backing of guest RAM with hugepages via ibm,expected#pages node of memory node in the device tree. This means rest of the guest RAM won't be backed by 16G contiguous pages in the host and hence a hash page table insertion can fail in such case. An example error message will look like hash-mmu: mm: Hashing failure ! EA=0x7efc00000000 access=0x8000000000000006 current=readback hash-mmu: trap=0x300 vsid=0x67af789 ssize=1 base psize=14 psize 14 pte=0xc000000400000386 readback[12260]: unhandled signal 7 at 00007efc00000000 nip 00000000100012d0 lr 000000001000127c code 2 This patch address that by preventing runtime allocation of 16G hugepages in LPAR config. To allocate 16G hugetlb one need to kernel command line hugepagesz=16G hugepages=<number of 16G pages> With radix translation mode we don't run into this issue. This change will prevent runtime allocation of 16G hugetlb pages on kvm with hash translation mode. However, with the current upstream it was observed that 16G hugetlbfs backed guest doesn't boot at all. We observe boot failure with the below message: [131354.647546] KVM: map_vrma at 0 failed, ret=-4 That means this patch is not resulting in an observable regression. Once we fix the boot issue with 16G hugetlb backed memory, we need to use ibm,expected#pages memory node attribute to indicate 16G page reservation to the guest. This will also enable partial backing of guest RAM with 16G pages. Fixes: 4ae279c2 ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
commit ca6d5149 upstream. GCC 8 warns about the logic in vr_get/set(), which with -Werror breaks the build: In function ‘user_regset_copyin’, inlined from ‘vr_set’ at arch/powerpc/kernel/ptrace.c:628:9: include/linux/regset.h:295:4: error: ‘memcpy’ offset [-527, -529] is out of the bounds [0, 16] of object ‘vrsave’ with type ‘union <anonymous>’ [-Werror=array-bounds] arch/powerpc/kernel/ptrace.c: In function ‘vr_set’: arch/powerpc/kernel/ptrace.c:623:5: note: ‘vrsave’ declared here } vrsave; This has been identified as a regression in GCC, see GCC bug 88273. However we can avoid the warning and also simplify the logic and make it more robust. Currently we pass -1 as end_pos to user_regset_copyout(). This says "copy up to the end of the regset". The definition of the regset is: [REGSET_VMX] = { .core_note_type = NT_PPC_VMX, .n = 34, .size = sizeof(vector128), .align = sizeof(vector128), .active = vr_active, .get = vr_get, .set = vr_set }, The end is calculated as (n * size), ie. 34 * sizeof(vector128). In vr_get/set() we pass start_pos as 33 * sizeof(vector128), meaning we can copy up to sizeof(vector128) into/out-of vrsave. The on-stack vrsave is defined as: union { elf_vrreg_t reg; u32 word; } vrsave; And elf_vrreg_t is: typedef __vector128 elf_vrreg_t; So there is no bug, but we rely on all those sizes lining up, otherwise we would have a kernel stack exposure/overwrite on our hands. Rather than relying on that we can pass an explict end_pos based on the sizeof(vrsave). The result should be exactly the same but it's more obviously not over-reading/writing the stack and it avoids the compiler warning. Reported-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Mathieu Malaterre <malat@debian.org> Cc: stable@vger.kernel.org Tested-by:
-
Mark Cave-Ayland authored
commit fe1ef6bc upstream. Commit 8792468d "powerpc: Add the ability to save FPU without giving it up" unexpectedly removed the MSR_FE0 and MSR_FE1 bits from the bitmask used to update the MSR of the previous thread in __giveup_fpu() causing a KVM-PR MacOS guest to lockup and panic the host kernel. Leaving FE0/1 enabled means unrelated processes might receive FPEs when they're not expecting them and crash. In particular if this happens to init the host will then panic. eg (transcribed): qemu-system-ppc[837]: unhandled signal 8 at 12cc9ce4 nip 12cc9ce4 lr 12cc9ca4 code 0 systemd[1]: unhandled signal 8 at 202f02e0 nip 202f02e0 lr 001003d4 code 0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reinstate these bits to the MSR bitmask to enable MacOS guests to run under 32-bit KVM-PR once again without issue. Fixes: 8792468d ("powerpc: Add the ability to save FPU without giving it up") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by:
-
Paul Mackerras authored
commit 19f8a5b5 upstream. Commit 24be85a2 ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug", 2017-07-21) added two calls to opal_slw_set_reg() inside pnv_cpu_offline(), with the aim of changing the LPCR value in the SLW image to disable wakeups from the decrementer while a CPU is offline. However, pnv_cpu_offline() gets called each time a secondary CPU thread is woken up to participate in running a KVM guest, that is, not just when a CPU is offlined. Since opal_slw_set_reg() is a very slow operation (with observed execution times around 20 milliseconds), this means that an offline secondary CPU can often be busy doing the opal_slw_set_reg() call when the primary CPU wants to grab all the secondary threads so that it can run a KVM guest. This leads to messages like "KVM: couldn't grab CPU n" being printed and guest execution failing. There is no need to reprogram the SLW image on every KVM guest entry and exit. So that we do it only when a CPU is really transitioning between online and offline, this moves the calls to pnv_program_cpu_hotplug_lpcr() into pnv_smp_cpu_kill_self(). Fixes: 24be85a2 ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Christophe Leroy authored
commit 36da5ff0 upstream. The 83xx has 8 SPRG registers and uses at least SPRG4 for DTLB handling LRU. Fixes: 2319f123 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround") Cc: stable@vger.kernel.org Signed-off-by:
-
Jordan Niethe authored
commit 7b62f9bd upstream. Currently the opal log is globally readable. It is kernel policy to limit the visibility of physical addresses / kernel pointers to root. Given this and the fact the opal log may contain this information it would be better to limit the readability to root. Fixes: bfc36894 ("powerpc/powernv: Add OPAL message log interface") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Reviewed-by:
Stewart Smith <stewart@linux.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Christophe Leroy authored
commit 6d183ca8 upstream. 'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400d ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by:
Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by:
-
Christophe Leroy authored
commit 9580b71b upstream. Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order to avoid confusing stacktrace like the one below. Call Trace: [c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180 [c0e9dd10] [c0895130] memchr+0x24/0x74 [c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4 --- interrupt: c0e9df00 at 0x400f330 LR = init_stack+0x1f00/0x2000 [c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable) [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 With this patch the trace becomes: Call Trace: [c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180 [c0e9dd10] [c0895150] memchr+0x24/0x74 [c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4 [c0e9de80] [c00ae3e4] printk+0xa8/0xcc [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 Cc: stable@vger.kernel.org Signed-off-by:
-
J. Bruce Fields authored
commit 3815a245 upstream. In the case when we're reusing a superblock, selinux_sb_clone_mnt_opts() fails to set set_kern_flags, with the result that nfs_clone_sb_security() incorrectly clears NFS_CAP_SECURITY_LABEL. The result is that if you mount the same NFS filesystem twice, NFS security labels are turned off, even if they would work fine if you mounted the filesystem only once. ("fixes" may be not exactly the right tag, it may be more like "fixed-other-cases-but-missed-this-one".) Cc: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Fixes: 0b4d3452 "security/selinux: allow security_sb_clone_mnt_opts..." Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Xin Long authored
commit 292c997a upstream. As does in __sctp_connect(), when checking addrs in a while loop, after get the addr len according to sa_family, it's necessary to do the check walk_size + af->sockaddr_len > addrs_size to make sure it won't access an out-of-bounds addr. The same thing is needed in selinux_sctp_bind_connect(), otherwise an out-of-bounds issue can be triggered: [14548.772313] BUG: KASAN: slab-out-of-bounds in selinux_sctp_bind_connect+0x1aa/0x1f0 [14548.927083] Call Trace: [14548.938072] dump_stack+0x9a/0xe9 [14548.953015] print_address_description+0x65/0x22e [14548.996524] kasan_report.cold.6+0x92/0x1a6 [14549.015335] selinux_sctp_bind_connect+0x1aa/0x1f0 [14549.036947] security_sctp_bind_connect+0x58/0x90 [14549.058142] __sctp_setsockopt_connectx+0x5a/0x150 [sctp] [14549.081650] sctp_setsockopt.part.24+0x1322/0x3ce0 [sctp] Cc: stable@vger.kernel.org Fixes: d452930f ("selinux: Add SCTP support") Reported-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
zhangyi (F) authored
commit 01215d3e upstream. The jh pointer may be used uninitialized in the two cases below and the compiler complain about it when enabling JBUFFER_TRACE macro, fix them. In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here struct journal_head *jh; ^ In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here struct journal_head *jh; ^ Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
zhangyi (F) authored
commit 904cdbd4 upstream. Now, we capture a data corruption problem on ext4 while we're truncating an extent index block. Imaging that if we are revoking a buffer which has been journaled by the committing transaction, the buffer's jbddirty flag will not be cleared in jbd2_journal_forget(), so the commit code will set the buffer dirty flag again after refile the buffer. fsx kjournald2 jbd2_journal_commit_transaction jbd2_journal_revoke commit phase 1~5... jbd2_journal_forget belongs to older transaction commit phase 6 jbddirty not clear __jbd2_journal_refile_buffer __jbd2_journal_unfile_buffer test_clear_buffer_jbddirty mark_buffer_dirty Finally, if the freed extent index block was allocated again as data block by some other files, it may corrupt the file data after writing cached pages later, such as during unmount time. (In general, clean_bdev_aliases() related helpers should be invoked after re-allocation to prevent the above corruption, but unfortunately we missed it when zeroout the head of extra extent blocks in ext4_ext_handle_unwritten_extents()). This patch mark buffer as freed and set j_next_transaction to the new transaction when it already belongs to the committing transaction in jbd2_journal_forget(), so that commit code knows it should clear dirty bits when it is done with the buffer. This problem can be reproduced by xfstests generic/455 easily with seeds (3246 3247 3248 3249). Signed-off-by:
-
Jay Dolan authored
serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup() commit 78d3820b upstream. The four port Pericom chips have the fourth port at the wrong address. Make use of quirk to fix it. Fixes: c8d19242 ("serial: 8250: added acces i/o products quad and octal serial cards") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jay Dolan <jay.dolan@accesio.com> Signed-off-by:
-
Jay Dolan authored
commit b896b03b upstream. Have the correct number of ports created for ACCES serial cards. Two port cards show up as four ports, and four port cards show up as eight. Fixes: c8d19242 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by:
-
Lubomir Rintel authored
commit f4817843 upstream. There are two other drivers that bind to mrvl,mmp-uart and both of them assume register shift of 2 bits. There are device trees that lack the property and rely on that assumption. If this driver wins the race to bind to those devices, it should behave the same as the older deprecated driver. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: stable@vger.kernel.org Signed-off-by:
-
Anssi Hannula authored
commit 7abab160 upstream. If RX is disabled while there are still unprocessed bytes in RX FIFO, cdns_uart_handle_rx() called from interrupt handler will get stuck in the receive loop as read bytes will not get removed from the RX FIFO and CDNS_UART_SR_RXEMPTY bit will never get set. Avoid the stuck handler by checking first if RX is disabled. port->lock protects against race with RX-disabling functions. This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty: xuartps: Fix RX hang, and TX corruption in termios call") which fixed a similar issue in cdns_uart_set_termios(). The behavior can also be easily verified by e.g. setting CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the following loop will then get stuck. Resetting the FIFO using RXRST would not set RXEMPTY either so simply issuing a reset after RX-disable would not work. I observe this frequently on a ZynqMP board during heavy RX load at 1M baudrate when the reader process exits and thus RX gets disabled. Fixes: 61ec9016 ("tty/serial: add support for Xilinx PS UART") Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Cc: stable@vger.kernel.org Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 4c3024de ] BPF can adjust gso only for tcp bytestreams. Fail on other gso types. But only on gso packets. It does not touch this field if !gso_size. Fixes: b90efd22 ("bpf: only adjust gso_size on bytestream protocols") Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tvrtko Ursulin authored
[ Upstream commit ca22f32a ] Legacy behaviour was to allow non-page-aligned mmap requests, as does the linux mmap(2) implementation by virtue of automatically rounding up for the caller. To avoid breaking legacy userspace relax the newly introduced fix. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 5c4604e7 ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set") Reported-by:
Guenter Roeck <linux@roeck-us.net> Cc: Adam Zabrocki <adamza@microsoft.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.0+ Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit a90e1948) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Marc Kleine-Budde authored
[ Upstream commit 22233f7b ] This patch fixes the following checkpatch warning: | Macro argument 'x' may be better as '(x)' to avoid precedence issues Fixes: cbffaf7a ("can: flexcan: Always use last mailbox for TX") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Mark Walton authored
commit c378b3aa upstream. If a PCA953x gpio was used as an interrupt and then released, the shutdown function was trying to extract the pca953x_chip pointer directly from the irq_data, but in reality was getting the gpio_chip structure. The net effect was that the subsequent writes to the data structure corrupted data in the gpio_chip structure, which wasn't immediately obvious until attempting to use the GPIO again in the future, at which point the kernel panics. This fix correctly extracts the pca953x_chip structure via the gpio_chip structure, as is correctly done in the other irq functions. Fixes: 0a70fe00 ("gpio: pca953x: Clear irq trigger type on irq shutdown") Cc: stable@vger.kernel.org Signed-off-by:
Mark Walton <mark.walton@serialtek.com> Reviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Loic Poulain authored
commit 1d4c41f3 upstream. According to the ov5640 specification (2.7 power up sequence), host can access the sensor's registers 20ms after reset. Trying to access them before leads to undefined behavior and result in sporadic initialization errors. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Adam Ford <aford173@gmail.com> Signed-off-by:
-
Sowjanya Komatineni authored
commit f4e3f4ae upstream. Tegra186 and prior supports maximum 4K bytes per packet transfer including 12 bytes of packet header. This patch fixes max write length limit to account packet header size for transfers. Cc: stable@vger.kernel.org # 4.4+ Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
QiaoChong authored
commit 21698fd5 upstream. In the original code before 181bf1e8 the loop was continuing until it finds the first matching superios[i].io and p->base. But after 181bf1e8 the logic changed and the loop now returns the pointer to the first mismatched array element which is then used in get_superio_dma() and get_superio_irq() and thus returning the wrong value. Fix the condition so that it now returns the correct pointer. Fixes: 181bf1e8 ("parport_pc: clean up the modified while loops using for") Cc: Alan Cox <alan@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
QiaoChong <qiaochong@loongson.cn> [rewrite the commit message] Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Alexander Shishkin authored
commit 9ed3f222 upstream. When an output port driver is removed, also remove references to it from any masters. Failing to do this causes a NULL ptr dereference when configuring another output port: > BUG: unable to handle kernel NULL pointer dereference at 000000000000000d > RIP: 0010:master_attr_store+0x9d/0x160 [intel_th_gth] > Call Trace: > dev_attr_store+0x1b/0x30 > sysfs_kf_write+0x3c/0x50 > kernfs_fop_write+0x125/0x1a0 > __vfs_write+0x3a/0x190 > ? __vfs_write+0x5/0x190 > ? _cond_resched+0x1a/0x50 > ? rcu_all_qs+0x5/0xb0 > ? __vfs_write+0x5/0x190 > vfs_write+0xb8/0x1b0 > ksys_write+0x55/0xc0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x5a/0x140 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: b27a6a3f ("intel_th: Add Global Trace Hub driver") CC: stable@vger.kernel.org # v4.4+ Reported-by:
Ammy Yi <ammy.yi@intel.com> Signed-off-by:
-
Heikki Krogerus authored
commit 2b6e4924 upstream. With string type property entries we need to use sizeof(const char *) instead of the number of characters as the length of the entry. If the string was shorter then sizeof(const char *), attempts to read it would have failed with -EOVERFLOW. The problem has been hidden because all build-in string properties have had a string longer then 8 characters until now. Fixes: a85f4204 ("device property: helper macros for property entry creation") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Zev Weiss authored
commit 8cf7630b upstream. This bug has apparently existed since the introduction of this function in the pre-git era (4500e917 in Thomas Gleixner's history.git, "[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of neighbour sysctls."). As a minimal fix we can simply duplicate the corresponding check in do_proc_dointvec_conv(). Link: http://lkml.kernel.org/r/20190207123426.9202-3-zev@bewilderbeest.netSigned-off-by:
Zev Weiss <zev@bewilderbeest.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> [2.6.2+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Stancek authored
commit fc8efd2d upstream. LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8. This is a stress test, where one thread mmaps/writes/munmaps memory area and other thread is trying to read from it: CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51 Hardware name: IBM 2964 N63 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8) Call Trace: ([<0000000000000000>] (null)) [<00000000001adae4>] lock_acquire+0xec/0x258 [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98 [<000000000012a780>] page_table_free+0x48/0x1a8 [<00000000002f6e54>] do_fault+0xdc/0x670 [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0 [<00000000002fb138>] handle_mm_fault+0x1b0/0x320 [<00000000001248cc>] do_dat_exception+0x19c/0x2c8 [<000000000080e5ee>] pgm_check_handler+0x19e/0x200 page_table_free() is called with NULL mm parameter, but because "0" is a valid address on s390 (see S390_lowcore), it keeps going until it eventually crashes in lockdep's lock_acquire. This crash is reproducible at least since 4.14. Problem is that "vmf->vma" used in do_fault() can become stale. Because mmap_sem may be released, other threads can come in, call munmap() and cause "vma" be returned to kmem cache, and get zeroed/re-initialized and re-used: handle_mm_fault | __handle_mm_fault | do_fault | vma = vmf->vma | do_read_fault | __do_fault | vma->vm_ops->fault(vmf); | mmap_sem is released | | | do_munmap() | remove_vma_list() | remove_vma() | vm_area_free() | # vma is released | ... | # same vma is allocated | # from kmem cache | do_mmap() | vm_area_alloc() | memset(vma, 0, ...) | pte_free(vma->vm_mm, ...); | page_table_free | spin_lock_bh(&mm->context.lock);| <crash> | Cache mm_struct to avoid using potentially stale "vma". [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.comSigned-off-by:
Jan Stancek <jstancek@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Acked-by:
Rafael Aquini <aquini@redhat.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Roman Penyaev authored
commit 401592d2 upstream. When VM_NO_GUARD is not set area->size includes adjacent guard page, thus for correct size checking get_vm_area_size() should be used, but not area->size. This fixes possible kernel oops when userspace tries to mmap an area on 1 page bigger than was allocated by vmalloc_user() call: the size check inside remap_vmalloc_range_partial() accounts non-existing guard page also, so check successfully passes but vmalloc_to_page() returns NULL (guard page does not physically exist). The following code pattern example should trigger an oops: static int oops_mmap(struct file *file, struct vm_area_struct *vma) { void *mem; mem = vmalloc_user(4096); BUG_ON(!mem); /* Do not care about mem leak */ return remap_vmalloc_range(vma, mem, 0); } And userspace simply mmaps size + PAGE_SIZE: mmap(NULL, 8192, PROT_WRITE|PROT_READ, MAP_PRIVATE, fd, 0); Possible candidates for oops which do not have any explicit size checks: *** drivers/media/usb/stkwebcam/stk-webcam.c: v4l_stk_mmap[789] ret = remap_vmalloc_range(vma, sbuf->buffer, 0); Or the following one: *** drivers/video/fbdev/core/fbmem.c static int fb_mmap(struct file *file, struct vm_area_struct * vma) ... res = fb->fb_mmap(info, vma); Where fb_mmap callback calls remap_vmalloc_range() directly without any explicit checks: *** drivers/video/fbdev/vfb.c static int vfb_mmap(struct fb_info *info, struct vm_area_struct *vma) { return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff); } Link: http://lkml.kernel.org/r/20190103145954.16942-2-rpenyaev@suse.deSigned-off-by:
Roman Penyaev <rpenyaev@suse.de> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joe Perches <joe@perches.com> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
zhongjiang authored
commit 46612b75 upstream. When soft_offline_in_use_page() runs on a thp tail page after pmd is split, we trigger the following VM_BUG_ON_PAGE(): Memory failure: 0x3755ff: non anonymous thp __get_any_page: 0x3755ff: unknown zero refcount page type 2fffff80000000 Soft offlining pfn 0x34d805 at process virtual address 0x20fff000 page:ffffea000d360140 count:0 mapcount:0 mapping:0000000000000000 index:0x1 flags: 0x2fffff80000000() raw: 002fffff80000000 ffffea000d360108 ffffea000d360188 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:519! soft_offline_in_use_page() passed refcount and page lock from tail page to head page, which is not needed because we can pass any subpage to split_huge_page(). Naoya had fixed a similar issue in c3901e72 ("mm: hwpoison: fix thp split handling in memory_failure()"). But he missed fixing soft offline. Link: http://lkml.kernel.org/r/1551452476-24000-1-git-send-email-zhongjiang@huawei.com Fixes: 61f5d698 ("mm: re-enable THP") Signed-off-by:
zhongjiang <zhongjiang@huawei.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by:
-
Phuong Nguyen authored
commit d9140a0d upstream. This commit fixes the issue that USB-DMAC hangs silently after system resumes on R-Car Gen3 hence renesas_usbhs will not work correctly when using USB-DMAC for bulk transfer e.g. ethernet or serial gadgets. The issue can be reproduced by these steps: 1. modprobe g_serial 2. Suspend and resume system. 3. connect a usb cable to host side 4. Transfer data from Host to Target 5. cat /dev/ttyGS0 (Target side) 6. echo "test" > /dev/ttyACM0 (Host side) The 'cat' will not result anything. However, system still can work normally. Currently, USB-DMAC driver does not have system sleep callbacks hence this driver relies on the PM core to force runtime suspend/resume to suspend and reinitialize USB-DMAC during system resume. After the commit 17218e00 ("PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"), PM core will not force runtime suspend/resume anymore so this issue happens. To solve this, make system suspend resume explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks. SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC suspended after and initialized before renesas_usbhs." Signed-off-by:
Phuong Nguyen <phuong.nguyen.xw@renesas.com> Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ [shimoda: revise the commit log and add Cc tag] Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Nikolaus Voss authored
commit 8a863a60 upstream. Commit 1a2f474d handles block _reads_ separately with plain-I2C adapters, but the problem described with regmap-i2c not handling SMBus block transfers (i.e. read and writes) correctly also exists with writes. As workaround, this patch adds a block write function the same way 1a2f474d adds a block read function. Fixes: 1a2f474d ("usb: typec: tps6598x: handle block reads separately with plain-I2C adapters") Fixes: 0a4c005b ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by:
Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
Dmitry Osipenko authored
commit 563b9372 upstream. The ChipIdea's platform device need to be unregistered on Tegra's driver module removal. Fixes: dfebb5f4 ("usb: chipidea: Add support for Tegra20/30/114/124") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Paul Cercueil authored
commit 7ca4c922 upstream. The 'div' field does not represent a number of bits used to divide (understand: right-shift) the divider, but a number itself used to divide the divider. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Paul Cercueil authored
commit bc5d922c upstream. Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz. This results in a theorical divider of 41.999993 which is then rounded up to 42. The .round_rate function would then return (180 MHz / 42) as the clock, rounded down, so 4.285714 MHz. Calling clk_set_rate on 4.285714 MHz would round the rate again, and give a theorical divider of 42,0000028, now rounded up to 43, and the rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not what we requested. Fix this by rounding up the divisions. Signed-off-by:
-
Krzysztof Kozlowski authored
commit 785c9f41 upstream. Platform driver driver_override field should not be initialized from const memory because the core later kfree() it. If driver_override is manually set later through sysfs, kfree() of old value leads to: $ echo "new_value" > /sys/bus/platform/drivers/.../driver_override kernel BUG at ../mm/slub.c:3960! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kfree) from [<c058e8c0>] (platform_set_driver_override+0x84/0xac) (platform_set_driver_override) from [<c058e908>] (driver_override_store+0x20/0x34) (driver_override_store) from [<c031f778>] (kernfs_fop_write+0x100/0x1dc) (kernfs_fop_write) from [<c0296de8>] (__vfs_write+0x2c/0x17c) (__vfs_write) from [<c02970c4>] (vfs_write+0xa4/0x188) (vfs_write) from [<c02972e8>] (ksys_write+0x4c/0xac) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) The clk-exynos5-subcmu driver uses override only for the purpose of creating meaningful names for children devices (matching names of power domains, e.g. DISP, MFC). The driver_override was not developed for this purpose so just switch to default names of devices to fix the issue. Fixes: b06a532b ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 5f0b6216 upstream. During initialization of subdevices if platform_device_alloc() failed, returned NULL pointer will be later dereferenced. Add proper error paths to exynos5_clk_register_subcmu(). The return value of this function is still ignored because at this stage of init there is nothing we can do. Fixes: b06a532b ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tony Lindgren authored
commit 5ae51d67 upstream. I noticed that modprobe clk-twl6040 can fail after a cold boot with: abe_cm:clk:0010:0: failed to enable ... Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20 WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24 ... (clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90) (_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244) (_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44) (omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108) (sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8) (__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80) (rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694) (rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84) (__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c) (sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98) After searching around for a similar issue, I came across an earlier fix that never got merged upstream in the Android tree for glass-omap-xrr02. There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata" by Misael Lopez Cruz <misael.lopez@ti.com>. Based on my observations, this fix is also needed when cold booting devices, and not just for deeper idle modes. Since we now have a clock driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare(). Cc: Misael Lopez Cruz <misael.lopez@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
