Support socket option PACKET_VNET_HDR together with PACKET_RX_RING.
When enabled, a struct virtio_net_hdr will precede the data in the
packet ring slots.

Verified with test program at
github.com/wdebruij/kerneltools/blob/master/tests/psock_rxring_vnet.c

  pkt: 1454269209.798420 len=5066
  vnet: gso_type=tcpv4 gso_size=1448 hlen=66 ecn=off
  csum: start=34 off=16
  eth: proto=0x800
  ip: src=<masked> dst=<masked> proto=6 len=5052
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet_snd and packet_rcv support virtio net headers for GSO.
Move this logic into helper functions to be able to reuse it in
tpacket_snd and tpacket_rcv.

This is a straighforward code move with one exception. Instead of
creating and passing a separate gso_type variable, reuse
vnet_hdr.gso_type after conversion from virtio to kernel gso type.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the bonding allows to set ad_actor_system and prio while the
bond device is down, but these are actually applied only if there aren't
any slaves yet (applied to bond device when first slave shows up, and to
slaves at 3ad bind time). After this patch changes are applied immediately
and the new values can be used/seen after the bond's upped so it's not
necessary anymore to release all and enslave again to see the changes.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
bridge: mdb: flag offloaded mdb entries

This patchset extends uapi to let the user know if an mdb entry is offloaded.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Passing the port-group to br_mdb in order to allow direct access to the
structure. br_mdb will later use the structure to reflect HW reflection
status via "state" variable.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change net_bridge_port_group 'state' member to 'flags' and define new set
of flags internal to the kernel.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new bitmask member 'flags' to br_mdb_entry structure. Adding
MDB_FLAGS_OFFLOAD bit which indicates MDB entries is offloaded to hardware.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

remove some redudant brackets, use sizeof(*) instead of sizeof(struct x).
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unintentionally the default was changed to zero, fix
that.

Fixes: 12ed8244 ("ipv4: Namespaceify tcp syncookies sysctl knob")
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Borisov says:

====================
Namespaceify more of the tcp sysctl knobs

This patch series continues making more of the tcp-related
sysctl knobs be per net-namespace. Most of these apply per
socket and have global defaults so should be safe and I
don't expect any breakages.

Having those per net-namespace is useful when multiple
containers are hosted and it is required to tune the
tcp settings for each independently of the host node.

I've split the patches to be per-sysctl but after
the review if the outcome is positive I'm happy
to either send it in one big blob or just.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
This batch of patches includes a number of corrections and
improvements for our kernel-doc. These changes also make sure
that our doc is now properly processed by the kernel-doc
parsing tool.

Other than that you have a patch updating all the copyright
lines to 2016 and another patch switching the URLs in our
readme, Kconfig and MAINTAINERS file from "http" to "https".
Both by Sven Eckelmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
virtio_net: add ethtool get/set settings support

Patch 1 adds ethtool speed/duplex validation functions which check if the
value is defined. Patch 2 adds support for ethtool (get|set)_settings and
uses the validation functions to check the user-supplied values.

v2: split in 2 patches to allow everyone to make use of the validation
functions and allow virtio_net devices to be half duplex
v3: added a check to return error if the user tries to change anything else
besides duplex/speed as per Michael's comment
v4: Set port type to PORT_OTHER
v5: clear diff1.port (ignore port) when checking for changes since we set
it now and ethtool uses it in the set request

Sorry about the pointless iterations, should've all covered now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows the user to set and retrieve speed and duplex of the
virtio_net device via ethtool. Having this functionality is very helpful
for simulating different environments and also enables the virtio_net
device to participate in operations where proper speed and duplex are
required (e.g. currently bonding lacp mode requires full duplex). Custom
speed and duplex are not allowed, the user-supplied settings are validated
before applying.

Example:
$ ethtool eth1
Settings for eth1:
...
	Speed: Unknown!
	Duplex: Unknown! (255)
$ ethtool -s eth1 speed 1000 duplex full
$ ethtool eth1
Settings for eth1:
...
	Speed: 1000Mb/s
	Duplex: Full

Based on a patch by Roopa Prabhu.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functions which check if the speed/duplex are defined.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
sunvnet: perf tracepoint hooks

Added some perf tracepoints to help track and debug sunvnet
descriptor state at run-time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use sunvnet perf trace macros to monitor LDC message exchange state.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add perf event macros for support of tracing and instrumentation
of LDC state machine
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuchung Cheng says:

====================
tcp: congestion control refactoring

This patch set refactors the sequence of congestion control,
loss recovery, and transmission logic in TCP ack processing.

The design goal is to decouple and sequence them in the following order:

  0. ACK accounting: free or tag sent packets [unchanged]

  1. loss recovery: identify lost/ecn packets and update congestion state

  2. congestion control: up/down cwnd and pacing rate based on (1)

  3. transmission: send new or retransmit old based on (1) and (2)

This refactoring makes the cwnd changes more clear because it's done
in one place. The packet accounting is also more robust especially
for connections that do not support SACK. Patch 1-4 and 6 are
refactoring and patch 5 improves TCP performance under reordering.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor and consolidate cwnd and rate updates into a new function
tcp_cong_control().
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change enables congestion control to update cwnd based on
not only packet cumulatively acked but also packets delivered
out-of-order. This makes congestion control robust against packet
reordering because it may raise cwnd as long as packets are being
delivered once reordering has been detected (i.e., it only cares
the amount of packets delivered, not the ordering among them).
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A small refactoring that gets number of packets cumulatively acked
from tcp_clean_rtx_queue() directly.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the accounting of how many packets are
newly acked or sacked when the sender receives an ACK.

The current approach basically computes

   newly_acked_sacked = (prior_packets - prior_sacked) -
                        (tp->packets_out - tp->sacked_out)

   where prior_packets and prior_sacked out are snapshot
   at the beginning of the ACK processing.

The new approach tracks the delivery information via a new
TCP state variable "delivered" which monotically increases
as new packets are delivered in order or out-of-order.

The reason for this change is that the current approach is
brittle that produces negative or inaccurate estimate.

   1) For non-SACK connections, an ACK that advances the SND.UNA
   could reset the DUPACK counters (tp->sacked_out) in
   tcp_process_loss() or tcp_fastretrans_alert(). This inflates
   the inflight suddenly and causes under-estimate or even
   negative estimate. Here is a real example:

                   before   after (processing ACK)
   packets_out     75       73
   sacked_out      23        0
   ca state        Loss     Open

   The old approach computes (75-23) - (73 - 0) = -21 delivered
   while the new approach computes 1 delivered since it
   considers the 2nd-24th packets are delivered OOO.

   2) MSS change would re-count packets_out and sacked_out so
   the estimate is in-accurate and can even become negative.
   E.g., the inflight is doubled when MSS is halved.

   3) Spurious retransmission signaled by DSACK is not accounted

The new approach is simpler and more robust. For SACK connections,
tp->delivered increments as packets are being acked or sacked in
SACK and ACK processing.

For non-sack connections, it's done in tcp_remove_reno_sacks() and
tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered
is incremented by the number of packets ACKed (less the current
number of DUPACKs received plus one packet hole).  Upon receiving
a DUPACK, tp->delivered is incremented assuming one out-of-order
packet is delivered.

Upon receiving a DSACK, tp->delivered is incremtened assuming one
retransmission is delivered in tcp_sacktag_write_queue().
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the cwnd is reduced and increased in various different
places. The reduction happens in various places in the recovery
state processing (tcp_fastretrans_alert) while the increase
happens afterward.

A better sequence is to identify lost packets and update
the congestion control state (icsk_ca_state) first. Then base
on the new state, up/down the cwnd in one central place. It's
more clear to reason cwnd changes.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The retransmission and F-RTO transmission currently happen inside
recovery state processing (tcp_fastretrans_alert) but before
congestion control.  This refactoring moves the logic after both
s.t. we can determine how much to send (cwnd) before deciding what to
send.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove a write-only stack variable from unix_attach_fds(). This is a
left-over from the security fix in:

    commit 712f4aad
    Author: willy tarreau <w@1wt.eu>
    Date:   Sun Jan 10 07:54:56 2016 +0100

        unix: properly account for FDs passed over unix sockets
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allows userspace to have direct access to VRF table association
versus looking up master device and its table.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My recent patch to the Xen Project documents a protocol for 'dynamic
multicast control' in netif.h. This extends the previous multicast control
protocol to not require a shared ring reconnection to turn the feature off.
Instead the backend watches the "request-multicast-control" key in xenstore
and turns the feature off if the key value is written to zero.

This patch adds support for dynamic multicast control in xen-netback.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sriharsha Basavapatna says:

====================
be2net patch-set

v2 changes:
	Patch-4:	Changed a tab to space in be.h
	Patches-6,7,8:	Updated commit log summary line: benet --> be2net

Hi David,

The following patch set contains a few non-critical bug fixes. Please
consider applying this to the net-next tree. Thanks.

Patch-1 fixes be_set_phys_id() ethtool function to return an error code.
Patch-2 fixes a warning when some commands fail for VFs.
Patch-3 fixes be_vlan_rem_vid() to verify vlan being removed is in the list.
Patch-4 improves SRIOV queue distribution logic.
Patch-5 avoids running self test on VFs.
Patch-6 fixes error recovery in Lancer to clean up after moving to ready state.
Patch-7 adds retry logic to error recovery in case of recovery failures
Patch-8 fixes time interval used in eq delay computation routine
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Interrupt moderation parameters need to be recalculated only
after a time interval of 1 ms. Interval calculation is wrong
when there is a rollover of jiffies. Using recommended way of interval
calculation using jiffies to fix this.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Retry error recovery MAX_ERR_RECOVERY_RETRY_COUNT times in case of
failure during error recovery.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After error is detected, wait for adapter to move to ready state
before destroying queues and cleanup of other resources. Also
skip performing any cleanup for non-Lancer chips and move debug
messages to correct routine.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>