We now destroy finished jobs from the worker thread to make sure that
we never destroy a job currently in timeout processing.
By this we avoid holding lock around ring mirror list in drm_sched_stop
which should solve a deadlock reported by a user.

v2: Remove unused variable.
v4: Move guilty job free into sched code.
v5:
Move sched->hw_rq_count to drm_sched_start to account for counter
decrement in drm_sched_stop even when we don't call resubmit jobs
if guily job did signal.
v6: remove unused variable

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109692Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555599624-12285-3-git-send-email-andrey.grodzovsky@amd.com

The 50 ms default timeout waiting for vblanks is too small
for the first vblank from the ST-Ericsson MCDE display
controller over DSI. Presumably this is because the DSI
display is command-mode only and the state machine will
take some time setting up its state for the first display
update, and we hit a timeout. 100 ms makes it pass without
problems.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430093746.26485-1-linus.walleij@linaro.org

David Herrmann removed the last bits of drm_bus in:
commit c5786fe5 ("drm: Goody bye, drm_bus!")

Remove the todo item.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com> [I miss drm_bus!]
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126192732.15263-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190126192732.15263-1-sam@ravnborg.org

Convert vkms to using __drm_atomic_helper_crtc_reset(), instead of
writing its own version. Instead of open coding destroy_state(),
call it directly for freeing the old state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-17-maarten.lankhorst@linux.intel.comReviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>

Convert msm to using __drm_atomic_helper_crtc_reset(), instead of
writing its own version. Instead of open coding
destroy_state(), call it directly for freeing the old state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
[mlankhorst: Remove double assignment of mdp5_cstate in reset (seanpaul)]
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-11-maarten.lankhorst@linux.intel.com

Convert tegra to using __drm_atomic_helper_crtc_reset(), instead of
writing its own version. Instead of open coding destroy_state(),
call it directly for freeing the old state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
[mlankhorst: Keep tegra_crtc_reset at the same place and predeclare
 tegra_crtc_atomic_destroy_state (tagr)]
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-15-maarten.lankhorst@linux.intel.com

Convert rockchip to using __drm_atomic_helper_crtc_reset(), instead of
writing its own version. Instead of open coding
destroy_state(), call it directly for freeing the old state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-14-maarten.lankhorst@linux.intel.com

Convert mali to using __drm_atomic_helper_crtc_reset(), instead of
writing its own version. Instead of open coding
malidp_crtc_destroy_state(), call it directly for freeing the old state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-6-maarten.lankhorst@linux.intel.com

i915 has its own hw readout and doesn't use the reset helpers directly.
Still it has 2 places where it initialises the crtc_state. Fix those
by calling __drm_atomic_helper_crtc_reset().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Not-nacked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-8-maarten.lankhorst@linux.intel.com

The docs state the callback is optional but it is not, make it optional.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329165201.16233-1-afd@ti.com

Other function have inline documentation, a couple still have
theirs at the top of the structure, update the docs and move
them inline.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321200957.16938-2-afd@ti.com

The map_atomic/unmap_atomic callbacks have been removed, remove
the related comments.

Fixes: f664a526 ("dma-buf: remove kmap_atomic interface")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321200957.16938-1-afd@ti.com

The debugfs take reference on fence without dropping them.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206161840.6578-1-jglisse@redhat.com

Add support of DRM_FORMAT_MOD_LINEAR modifier.
Signed-off-by: Mickael Reulier <mickael.reulier@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1554283514-2960-1-git-send-email-yannick.fertre@st.comSigned-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Display controller reset must be done as soon as possible after enable
the clock to avoid partial refresh on screen.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1554283453-2879-1-git-send-email-yannick.fertre@st.com

If the number of layer is greater than LTDC_MAX_LAYER, we can have
memory overflow when reading plane_fpsi[].
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1554283216-2700-1-git-send-email-yannick.fertre@st.com

Plane updates must be synchronized on vblank with the shadow register mechanism
to avoid partial refresh on screen.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1554103457-29595-1-git-send-email-yannick.fertre@st.com

Wrong DISPLAY_FLAGS used to set the data enable polarity.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1553874620-31468-1-git-send-email-yannick.fertre@st.com

Use DRM_WARN() instead of DRM_DEBUG_DRIVER() to better
inform the user in case of fifo underruns or
transfer errors.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1553874548-31366-1-git-send-email-yannick.fertre@st.com

Interrupt register must be disabled before call of
devm_request_threaded_irq function to avoid dummy interruption.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1553874485-31259-1-git-send-email-yannick.fertre@st.com

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-4-maarten.lankhorst@linux.intel.com

We already have __drm_atomic_helper_connector_reset() and
__drm_atomic_helper_plane_reset(), extend this to crtc as well.

This will allow us to set default values in the crtc_state, without
having to do it in each driver separately.

Of all drivers that need conversion, only nouveau is done in this
commit, because it wrote its own __drm_atomic_helper_crtc_reset(),
clashing with the drm core.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-3-maarten.lankhorst@linux.intel.com

Add support the Evervision VGG804821 800x480 5.0" WVGA TFT panel.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416100645.21689-4-m.felsch@pengutronix.de

Add device tree bindings for the Evervision VG804821 800x480 5.0" LCD
TFT parallel panel.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416100645.21689-3-m.felsch@pengutronix.de

Evervision Electronics is a panel manufacturer from Taipei.
http://www.evervisionlcd.com/index.php?lang=enSigned-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416100645.21689-2-m.felsch@pengutronix.de

Add support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.

The datasheet with all specs can be retrieved online:
https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \
Specifications/Active%20Displays/ET035012DM6.pdf
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
[m.felsch@pengutronix.de: adapt commit message]
[m.felsch@pengutronix.de: rm unecessary comments]
[m.felsch@pengutronix.de: correct data_enable polarity]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416101630.3482-2-m.felsch@pengutronix.de

Add support for the ET035012DM6 3.5" QVGA TFT LCD panel. The datasheet
can be retrieved online:

https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \
Specifications/Active%20Displays/ET035012DM6.pdf
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416101630.3482-1-m.felsch@pengutronix.de

Remove duplicate header which is included twice.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555183750-11028-1-git-send-email-jrdr.linux@gmail.com

Add support for Three Five displays TFC S9700RTWV43TR-01B 800x480
panel with resistive touch found on TI's AM335X-EVM.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba4b2c26beec014b7b3c84a27b9413cec7ef2902.1553243203.git.jsarha@ti.com

Add bindign for TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD
panel with resistive touch.

The panel is found on TI AM335x-evm.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24fea39438decd1e17a9c9afa320d49aca03f60d.1553243203.git.jsarha@ti.com

The EDT ETM0430G0DH6 is 4.3" 480x272 panel, which can be
supported by the simple panel driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219140438.17063-2-marex@denx.de

Document the Emerging Display Technology Corp. (EDT) ETM0430G0DH6
display, which is a 480x272 4.3" TFT display.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Jan Tuerk <jan.tuerk@emtrion.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219140438.17063-1-marex@denx.de

In case mipi_dsi_attach() fails remove the registered panel to avoid added
panel without corresponding device.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.com

The panel is similar to OSD101T2045-53TS (which is handled by panel-simple)
with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL
message to be sent from the host to be operational and thus can not be
handled by panel-simple.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-5-peter.ujfalusi@ti.com

This adds the device-tree bindings for the OSD101T2587-53TS 10.1"
1920x1200 panel from One Stop Displays.

Note: the panel is similar to OSD101T2045-53TS, but it needs additional
MIPI_DSI_TURN_ON_PERIPHERAL message from the host.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-4-peter.ujfalusi@ti.com

Add support for the OSD101T2045-53TS 10.1" 1920x1200 panel from One Stop
Displays to the panel-simple driver
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-3-peter.ujfalusi@ti.com

This adds the device-tree bindings for the OSD101T2045-53TS 10.1"
1920x1200 panel from One Stop Displays.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-2-peter.ujfalusi@ti.com

This patch adds Samsung S6E63M0 AMOLED LCD panel driver, connected over
spi. It's based on already removed, non-device-tree S6E63M0 driver and
panel-samsung-ld9040. It can be found for example in some of Samsung
Aries based phones.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222175153.20567-2-pawel.mikolaj.chmiel@gmail.com

This commit adds documentation for Samsung S6E63M0 AMOLED LCD panel
driver.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222175153.20567-1-pawel.mikolaj.chmiel@gmail.com

Add support for the VXT VL050-8048NT-C01 800x480 panel to the
panel-simple driver.

This panel is used on some boards manufactured by TechNexion, such as
imx7d-pico.
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219002706.20077-3-festevam@gmail.com