- 21 Jul, 2008 31 commits
-
-
Alan Cox authored
Fix up the termios of the people who have not yet got with the program Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
Switch cyclades to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Reverse the order of one test and it gets much more readable Signed-off-by:
-
Alan Cox authored
Switch the synclink ports to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch the stallion driver to use the tty_port structure Signed-off-by:
-
Haavard Skinnemoen authored
The tty pointer has been moved into a tty_port field, so we need to use ->info->port.tty instead of just ->info->tty. Fixes these build errors: David Brownell <david-b@pacbell.net> wrote: > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring': > drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma': > drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_startup': > drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty' > make[2]: *** [drivers/serial/atmel_serial.o] Error 1 Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by:
-
Alan Cox authored
Switch the rocketport to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch mxser to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch MOXA to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch istallion to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch isicom to use a tty_port structure for some fields Signed-off-by:
-
Alan Cox authored
Chris Malley posted a patch removing a NULL check in the riscom8 driver. Further analysis shows that even more of the tests are irrelevant so we can delete lots of stuff Signed-off-by:
-
Alan Cox authored
Switch riscom8 to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch drivers using the old "generic serial" driver to use the tty_port structures Signed-off-by:
-
Alan Cox authored
Switch esp to use the new tty_port structures Signed-off-by:
-
Alan Cox authored
Switch the EPCA driver to include and begin using a tty_port structure Signed-off-by:
-
Alan Cox authored
Coding style clean up and white space tidy Signed-off-by:
-
Takashi Iwai authored
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by:
Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by:
-
Jack Steiner authored
Fix compile errors in SGI console drivers caused by changes to the tty_port structures in the linux-next tree. Signed-off-by:
Jack Steiner <steiner@sgi.com> Acked-by:
-
Stephen Rothwell authored
Today's linux-next build (powerpc allyesconfig) failed like this: drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars': drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty' drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty' I applied the patch below (which builds but may, or may not, be correct). -- Cheers, Stephen Rothwell sfr@canb.auug.org.au http://www.canb.auug.org.au/~sfr/Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
Today's linux-next build (sparc64 defconfig) failed like this: drivers/serial/sunhv.c: In function `receive_chars': drivers/serial/sunhv.c:188: error: structure has no member named `tty' drivers/serial/sunsu.c: In function `receive_chars': drivers/serial/sunsu.c:314: error: structure has no member named `tty' drivers/serial/sunsab.c: In function `receive_chars': drivers/serial/sunsab.c:121: error: structure has no member named `tty' I applied the following patch (which, again, may not be correct). Signed-off-by:
-
David Howells authored
Fix MN10300's serial port driver to get at its tty_struct as this moved from struct uart_info into struct tty_port in patch: Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Alan Cox authored
Switch the serial_core based drivers to use the new tty_port structure. We can't quite use all of it yet because of the dynamically allocated extras in the serial_core layer. Signed-off-by:
-
Alan Cox authored
Every tty driver has its own concept of a port structure and because they all differ we cannot extract commonality. Begin fixing this by creating a structure drivers can elect to use so that over time we can push fields into this and create commonality and then introduce common methods. Signed-off-by:
-
Adrian Bunk authored
This patch removes CVS keywords that weren't updated for a long time in comments, printk's and MODULE_DESCRIPTION's (no printk's or MODULE_DESCRIPTION's are completely removed). While doing this I also found and fixed a missing \n in a printk in m32r_sio.c Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
This patch removes ancient VCS tags (either protected by #ifdef SCCS_LABELS or commented out). Signed-off-by:
-
Alan Cox authored
Move the line disciplines towards a conventional ->ops arrangement. For the moment the actual 'tty_ldisc' struct in the tty is kept as part of the tty struct but this can then be changed if it turns out that when it all settles down we want to refcount ldiscs separately to the tty. Pull the ldisc code out of /proc and put it with our ldisc code. Signed-off-by:
-
Jiri Slaby authored
Don't forget to enable and disable PCI devices. The device might be unusable without that. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Haavard Skinnemoen authored
Avoid dumping garbage to the serial port when the tty is flushed. This tends to happen when rebooting from a serial console. Signed-off-by:
-
Haavard Skinnemoen authored
Serial drivers using DMA (like the atmel_serial driver) tend to get very confused when the xmit buffer is flushed and nobody told them. They also tend to spew a lot of garbage since the DMA engine keeps running after the buffer is flushed and possibly refilled with unrelated data. This patch adds a new flush_buffer operation to the uart_ops struct, along with a call to it from uart_flush_buffer() right after the xmit buffer has been cleared. The driver can implement this in order to syncronize its internal DMA state with the xmit buffer when the buffer is flushed. Signed-off-by:
-
Alan Cox authored
Noted by Tony Luck although I've done the patches differently and also removed some other bogus oddments. Signed-off-by:
-
- 17 Jul, 2008 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH] ocfs2: fix oops in mmap_truncate testing configfs: call drop_link() to cleanup after create_link() failure configfs: Allow ->make_item() and ->make_group() to return detailed errors. configfs: Fix failing mkdir() making racing rmdir() fail configfs: Fix deadlock with racing rmdir() and rename() configfs: Make configfs_new_dirent() return error code instead of NULL configfs: Protect configfs_dirent s_links list mutations configfs: Introduce configfs_dirent_lock ocfs2: Don't snprintf() without a format. ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs ocfs2/net: Silence build warnings on sparc64 ocfs2: Handle error during journal load ocfs2: Silence an error message in ocfs2_file_aio_read() ocfs2: use simple_read_from_buffer() ocfs2: fix printk format warnings with OCFS2_FS_STATS=n [PATCH 2/2] ocfs2: Instrument fs cluster locks [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: pcmcia: ide-cs: Remove outdated comment pcmcia: fix cisinfo_t removal pcmcia: fix return value in cm4000_cs.c
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix asm/e820.h for userspace inclusion x86: fix numaq_tsc_disable x86: fix kernel_physical_mapping_init() for large x86 systems
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ftrace: do not trace library functions ftrace: do not trace scheduler functions ftrace: fix lockup with MAXSMP ftrace: fix merge buglet
-
Rusty Russell authored
asm-x86/e820.h is included from userspace. 'x86: make e820.c to have common functions' (b79cd8f1) broke it: make -C Documentation/lguest cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include lguest.c -lz -o lguest In file included from ../../include/asm-x86/bootparam.h:8, from lguest.c:45: ../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘e820_update_range’ ... Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
fix: arch/x86/kernel/numaq_32.c: In function ‘numaq_tsc_disable’: arch/x86/kernel/numaq_32.c:99: warning: ‘return’ with a value, in function returning void Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Ingo Molnar authored
-
Takashi Iwai authored
Fix calls of smp_call_function*() in arch/ia64/kvm for recent API changes. CC [M] arch/ia64/kvm/kvm-ia64.o arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge': arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single' arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick': arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single' Signed-off-by: -
Linus Torvalds authored
Merge branch 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace * 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace: fix dangling zombie when new parent ignores children do_wait: return security_task_wait() error code in place of -ECHILD ptrace children revamp do_wait reorganization
-
