Pull ARM SoC defconfig updates from Olof Johansson:
 "We keep this in a separate branch to avoid cross-branch conflicts, but
  most of the material here is fairly boring -- some new drivers turned
  on for hardware since they were merged, and some refreshed files due
  to time having moved a lot of entries around"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  arm64: defconfig: Enable Broadcom's GENET Ethernet controller
  ARM: multi_v7_defconfig: Enable devfreq thermal integration
  ARM: exynos_defconfig: Enable devfreq thermal integration
  ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
  ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
  arm64: defconfig: Enable Actions Semi specific drivers
  arm64: defconfig: Enable Broadcom's STB PCIe controller
  arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
  ARM: configs: at91: enable config flags for sam9x60 SoC
  ARM: configs: at91: use savedefconfig
  arm64: defconfig: Enable tegra XUDC support
  ARM: defconfig: gemini: Update defconfig
  arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
  arm64: defconfig: enable CONFIG_QCOM_CPR
  arm64: defconfig: Enable HFPLL
  arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
  ARM: imx_v6_v7_defconfig: Select the TFP410 driver
  ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
  arm64: defconfig: Enable ATH10K_SNOC
  ...

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - Nvidia: Fuse support for Tegra194, continued memory controller
     pieces for Tegra30

   - NXP/FSL: Refactorings of QuickEngine drivers to support
     ARM/ARM64/PPC

   - NXP/FSL: i.MX8MP SoC driver pieces

   - TI Keystone: ring accelerator driver

   - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.

   - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
     communication for power management

   - Overall support patch set for cpuidle on more complex hierarchies
     (PSCI-based)

  and misc cleanups, refactorings of Marvell, TI, other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
  drivers: soc: xilinx: Use mailbox IPI callback
  dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
  drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
  MAINTAINERS: Add brcmstb PCIe controller entry
  soc/tegra: fuse: Unmap registers once they are not needed anymore
  soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
  soc/tegra: fuse: Warn if straps are not ready
  soc/tegra: fuse: Cache values of straps and Chip ID registers
  memory: tegra30-emc: Correct error message for timed out auto calibration
  memory: tegra30-emc: Firm up hardware programming sequence
  memory: tegra30-emc: Firm up suspend/resume sequence
  soc/tegra: regulators: Do nothing if voltage is unchanged
  memory: tegra: Correct reset value of xusb_hostr
  soc/tegra: fuse: Add APB DMA dependency for Tegra20
  bus: tegra-aconnect: Remove PM_CLK dependency
  dt-bindings: mediatek: add MT6765 power dt-bindings
  soc: mediatek: cmdq: delete not used define
  memory: tegra: Add support for the Tegra194 memory controller
  memory: tegra: Only include support for enabled SoCs
  memory: tegra: Support DVFS on Tegra186 and later
  ...

Pull ARM Device-tree updates from Olof Johansson:
 "New SoCs:

   - Atmel/Microchip SAM9X60 (ARM926 SoC)

   - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all
     variants of it with different GPU/media IP configurations.

   - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)

   - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of
     db8500)

   - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)

   - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)

  New boards:

   - Allwinner:
      + Emlid Neutis SoM (H3 variant)
      + Libre Computer ALL-H3-IT
      + PineH64 Model B

   - Amlogic:
      + Libretech Amlogic GX PC (s905d and s912-based variants)

   - Atmel/Microchip:
      + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)

   - Marvell:
      + Armada 385-based SolidRun Clearfog GTR

   - NXP:
      + Gateworks GW59xx boards based on i.MX6/6Q/6QDL
      + Tolino Shine 3 eBook reader (i.MX6sl)
      + Embedded Artists COM (i.MX7ULP)
      + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
      + Google Coral Edge TPU (i.MX8MQ)

   - Rockchip:
      + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
      + Radxa Rock Pi N10 (RK3399Pro-based)
      + VMARC RK3399Pro SOM

   - ST:
      + Reference boards for stm32mp15

   - ST Ericsson:
      + Samsung Galaxy S III mini (GT-I8190)
      + HREF520 reference board for DB8520

   - TI OMAP:
      + Gen1 Amazon Echo (OMAP3630-based)

   - Qualcomm:
      + Inforce 6640 Single Board Computer (msm8996-based)
      + SC7180 IDP (SC7180-based)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits)
  dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml
  arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
  arm64: dts: ti: k3-am65-main Add CAL node
  arm64: dts: ti: k3-j721e-main: Add McASP nodes
  arm64: dts: ti: k3-am654-main: Add McASP nodes
  arm64: dts: ti: k3-j721e: DMA support
  arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
  arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
  arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
  arm64: dts: ti: k3-am65: DMA support
  arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
  arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
  ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
  ARM: dts: aspeed: rainier: Switch PSUs to unknown version
  arm64: dts: rockchip: Kill off "simple-panel" compatibles
  ARM: dts: rockchip: Kill off "simple-panel" compatibles
  arm64: dts: rockchip: rename dwmmc node names to mmc
  ARM: dts: rockchip: rename dwmmc node names to mmc
  arm64: dts: exynos: Rename Samsung and Exynos to lowercase
  arm64: dts: uniphier: add reset-names to NAND controller node
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Most of these are smaller fixes that have accrued, and some continued
  cleanup of OMAP platforms towards shared frameworks.

  One new SoC from Atmel/Microchip: sam9x60"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  ARM: OMAP2+: Fix undefined reference to omap_secure_init
  ARM: s3c64xx: Drop unneeded select of TIMER_OF
  ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0
  ARM: s3c24xx: Switch to atomic pwm API in rx1950
  ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers
  ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
  ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
  ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization
  ARM: at91: Documentation: add sam9x60 product and datasheet
  ARM: at91: pm: use of_device_id array to find the proper shdwc node
  ARM: at91: pm: use SAM9X60 PMC's compatible
  ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A
  ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start
  ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume
  ARM: tegra: Modify reshift divider during LP1
  ARM: tegra: Enable PLLP bypass during Tegra124 LP1
  ARM: samsung: Rename Samsung and Exynos to lowercase
  ARM: exynos: Correct the help text for platform Kconfig option
  ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB
  ARM: brcmstb: Add debug UART entry for 7216
  ...

Pull compat-ioctl fix from Arnd Bergmann:
 "One patch in the compat-ioctl series broke 32-bit rootfs for multiple
  people testing on 64-bit kernels. Let's fix it in -rc1 before others
  run into the same issue"

* tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
  compat_ioctl: fix FIONREAD on devices

Pull vfs file system parameter updates from Al Viro:
 "Saner fs_parser.c guts and data structures. The system-wide registry
  of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
  the horror switch() in fs_parse() that would have to grow another case
  every time something got added to that system-wide registry.

  New syntax types can be added by filesystems easily now, and their
  namespace is that of functions - not of system-wide enum members. IOW,
  they can be shared or kept private and if some turn out to be widely
  useful, we can make them common library helpers, etc., without having
  to do anything whatsoever to fs_parse() itself.

  And we already get that kind of requests - the thing that finally
  pushed me into doing that was "oh, and let's add one for timeouts -
  things like 15s or 2h". If some filesystem really wants that, let them
  do it. Without somebody having to play gatekeeper for the variants
  blessed by direct support in fs_parse(), TYVM.

  Quite a bit of boilerplate is gone. And IMO the data structures make a
  lot more sense now. -200LoC, while we are at it"

* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
  tmpfs: switch to use of invalfc()
  cgroup1: switch to use of errorfc() et.al.
  procfs: switch to use of invalfc()
  hugetlbfs: switch to use of invalfc()
  cramfs: switch to use of errofc() et.al.
  gfs2: switch to use of errorfc() et.al.
  fuse: switch to use errorfc() et.al.
  ceph: use errorfc() and friends instead of spelling the prefix out
  prefix-handling analogues of errorf() and friends
  turn fs_param_is_... into functions
  fs_parse: handle optional arguments sanely
  fs_parse: fold fs_parameter_desc/fs_parameter_spec
  fs_parser: remove fs_parameter_description name field
  add prefix to fs_context->log
  ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
  new primitive: __fs_parse()
  switch rbd and libceph to p_log-based primitives
  struct p_log, variants of warnf() et.al. taking that one instead
  teach logfc() to handle prefices, give it saner calling conventions
  get rid of cg_invalf()
  ...

Pull misc vfs updates from Al Viro:

 - bmap series from cmaiolino

 - getting rid of convolutions in copy_mount_options() (use a couple of
   copy_from_user() instead of the __get_user() crap)

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  saner copy_mount_options()
  fibmap: Reject negative block numbers
  fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
  ecryptfs: drop direct calls to ->bmap
  cachefiles: drop direct usage of ->bmap method.
  fs: Enable bmap() function to properly return errors

Merge thundering herd avoidance on pipe IO.

This would have been applied for 5.5 already, but got delayed because of
a user-space race condition in the GNU make jobserver code.  Now that
there's a new GNU make 4.3 release, and most distributions seem to have
at least applied the (almost three year old) fix for the problem, let's
see if people notice.

And it might have been just bad random timing luck on my machine.

If you do hit the race condition, things will still work, but the
symptom is that you don't get nearly the expected parallelism when using
"make -j<N>".

The jobserver bug can definitely happen without this patch too, but
seems to be easier to trigger when we no longer wake up pipe waiters
unnecessarily.

* pipe-exclusive-wakeup:
  pipe: use exclusive waits when reading or writing

This makes the pipe code use separate wait-queues and exclusive waiting
for readers and writers, avoiding a nasty thundering herd problem when
there are lots of readers waiting for data on a pipe (or, less commonly,
lots of writers waiting for a pipe to have space).

While this isn't a common occurrence in the traditional "use a pipe as a
data transport" case, where you typically only have a single reader and
a single writer process, there is one common special case: using a pipe
as a source of "locking tokens" rather than for data communication.

In particular, the GNU make jobserver code ends up using a pipe as a way
to limit parallelism, where each job consumes a token by reading a byte
from the jobserver pipe, and releases the token by writing a byte back
to the pipe.

This pattern is fairly traditional on Unix, and works very well, but
will waste a lot of time waking up a lot of processes when only a single
reader needs to be woken up when a writer releases a new token.

A simplified test-case of just this pipe interaction is to create 64
processes, and then pass a single token around between them (this
test-case also intentionally passes another token that gets ignored to
test the "wake up next" logic too, in case anybody wonders about it):

    #include <unistd.h>

    int main(int argc, char **argv)
    {
        int fd[2], counters[2];

        pipe(fd);
        counters[0] = 0;
        counters[1] = -1;
        write(fd[1], counters, sizeof(counters));

        /* 64 processes */
        fork(); fork(); fork(); fork(); fork(); fork();

        do {
                int i;
                read(fd[0], &i, sizeof(i));
                if (i < 0)
                        continue;
                counters[0] = i+1;
                write(fd[1], counters, (1+(i & 1)) *sizeof(int));
        } while (counters[0] < 1000000);
        return 0;
    }

and in a perfect world, passing that token around should only cause one
context switch per transfer, when the writer of a token causes a
directed wakeup of just a single reader.

But with the "writer wakes all readers" model we traditionally had, on
my test box the above case causes more than an order of magnitude more
scheduling: instead of the expected ~1M context switches, "perf stat"
shows

        231,852.37 msec task-clock                #   15.857 CPUs utilized
        11,250,961      context-switches          #    0.049 M/sec
           616,304      cpu-migrations            #    0.003 M/sec
             1,648      page-faults               #    0.007 K/sec
 1,097,903,998,514      cycles                    #    4.735 GHz
   120,781,778,352      instructions              #    0.11  insn per cycle
    27,997,056,043      branches                  #  120.754 M/sec
       283,581,233      branch-misses             #    1.01% of all branches

      14.621273891 seconds time elapsed

       0.018243000 seconds user
       3.611468000 seconds sys

before this commit.

After this commit, I get

          5,229.55 msec task-clock                #    3.072 CPUs utilized
         1,212,233      context-switches          #    0.232 M/sec
           103,951      cpu-migrations            #    0.020 M/sec
             1,328      page-faults               #    0.254 K/sec
    21,307,456,166      cycles                    #    4.074 GHz
    12,947,819,999      instructions              #    0.61  insn per cycle
     2,881,985,678      branches                  #  551.096 M/sec
        64,267,015      branch-misses             #    2.23% of all branches

       1.702148350 seconds time elapsed

       0.004868000 seconds user
       0.110786000 seconds sys

instead. Much better.

[ Note! This kernel improvement seems to be very good at triggering a
  race condition in the make jobserver (in GNU make 4.2.1) for me. It's
  a long known bug that was fixed back in June 2017 by GNU make commit
  b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to
  avoid hangs.").

  But there wasn't a new release of GNU make until 4.3 on Jan 19 2020,
  so a number of distributions may still have the buggy version. Some
  have backported the fix to their 4.2.1 release, though, and even
  without the fix it's quite timing-dependent whether the bug actually
  is hit. ]

Josh Triplett says:
 "I've been hammering on your pipe fix patch (switching to exclusive
  wait queues) for a month or so, on several different systems, and I've
  run into no issues with it. The patch *substantially* improves
  parallel build times on large (~100 CPU) systems, both with parallel
  make and with other things that use make's pipe-based jobserver.

  All current distributions (including stable and long-term stable
  distributions) have versions of GNU make that no longer have the
  jobserver bug"
Tested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My final cleanup patch for sys_compat_ioctl() introduced a regression on
the FIONREAD ioctl command, which is used for both regular and special
files, but only works on regular files after my patch, as I had missed
the warning that Al Viro put into a comment right above it.

Change it back so it can work on any file again by moving the implementation
to do_vfs_ioctl() instead.

Fixes: 77b90401 ("compat_ioctl: simplify the implementation")
Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull fuse fixes from Miklos Szeredi:

 - Fix a regression introduced in v5.1 that triggers WARNINGs for some
   fuse filesystems

 - Fix an xfstest failure

 - Allow overlayfs to be used on top of fuse/virtiofs

 - Code and documentation cleanups

* tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use true,false for bool variable
  Documentation: filesystems: convert fuse to RST
  fuse: Support RENAME_WHITEOUT flag
  fuse: don't overflow LLONG_MAX with end offset
  fix up iter on short count in fuse_direct_io()

Pull gfs2 fixes from Andreas Gruenbacher:

 - Fix a bug in Abhi Das's journal head lookup improvements that can
   cause a valid journal to be rejected.

 - Fix an O_SYNC write handling bug reported by Christoph Hellwig.

* tag 'gfs2-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: fix O_SYNC write handling
  gfs2: move setting current->backing_dev_info
  gfs2: fix gfs2_find_jhead that returns uninitialized jhead with seq 0

Pull orangefs fix from Mike Marshall:
 "Debugfs fix for orangefs.

  Vasliy Averin noticed that 'if seq_file .next function does not change
  position index, read after some lseek can generate unexpected output'
  and sent in this fix"

* tag 'for-linus-5.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  help_next should increase position index

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Server-to-server copy code from Olga.

     To use it, client and both servers must have support, the target
     server must be able to access the source server over NFSv4.2, and
     the target server must have the inter_copy_offload_enable module
     parameter set.

   - Improvements and bugfixes for the new filehandle cache, especially
     in the container case, from Trond

   - Also from Trond, better reporting of write errors.

   - Y2038 work from Arnd"

* tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits)
  sunrpc: expiry_time should be seconds not timeval
  nfsd: make nfsd_filecache_wq variable static
  nfsd4: fix double free in nfsd4_do_async_copy()
  nfsd: convert file cache to use over/underflow safe refcount
  nfsd: Define the file access mode enum for tracing
  nfsd: Fix a perf warning
  nfsd: Ensure sampling of the write verifier is atomic with the write
  nfsd: Ensure sampling of the commit verifier is atomic with the commit
  sunrpc: clean up cache entry add/remove from hashtable
  sunrpc: Fix potential leaks in sunrpc_cache_unhash()
  nfsd: Ensure exclusion between CLONE and WRITE errors
  nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range()
  nfsd: Update the boot verifier on stable writes too.
  nfsd: Fix stable writes
  nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument
  nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create()
  nfsd: Reduce the number of calls to nfsd_file_gc()
  nfsd: Schedule the laundrette regularly irrespective of file errors
  nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN
  nfsd: Containerise filecache laundrette
  ...

Puyll NFS client updates from Anna Schumaker:
 "Stable bugfixes:
   - Fix memory leaks and corruption in readdir # v2.6.37+
   - Directory page cache needs to be locked when read # v2.6.37+

  New features:
   - Convert NFS to use the new mount API
   - Add "softreval" mount option to let clients use cache if server goes down
   - Add a config option to compile without UDP support
   - Limit the number of inactive delegations the client can cache at once
   - Improved readdir concurrency using iterate_shared()

  Other bugfixes and cleanups:
   - More 64-bit time conversions
   - Add additional diagnostic tracepoints
   - Check for holes in swapfiles, and add dependency on CONFIG_SWAP
   - Various xprtrdma cleanups to prepare for 5.7's changes
   - Several fixes for NFS writeback and commit handling
   - Fix acls over krb5i/krb5p mounts
   - Recover from premature loss of openstateids
   - Fix NFS v3 chacl and chmod bug
   - Compare creds using cred_fscmp()
   - Use kmemdup_nul() in more places
   - Optimize readdir cache page invalidation
   - Lease renewal and recovery fixes"

* tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (93 commits)
  NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewals
  NFSv4: try lease recovery on NFS4ERR_EXPIRED
  NFS: Fix memory leaks
  nfs: optimise readdir cache page invalidation
  NFS: Switch readdir to using iterate_shared()
  NFS: Use kmemdup_nul() in nfs_readdir_make_qstr()
  NFS: Directory page cache pages need to be locked when read
  NFS: Fix memory leaks and corruption in readdir
  SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id()
  NFS: Replace various occurrences of kstrndup() with kmemdup_nul()
  NFSv4: Limit the total number of cached delegations
  NFSv4: Add accounting for the number of active delegations held
  NFSv4: Try to return the delegation immediately when marked for return on close
  NFS: Clear NFS_DELEGATION_RETURN_IF_CLOSED when the delegation is returned
  NFSv4: nfs_inode_evict_delegation() should set NFS_DELEGATION_RETURNING
  NFS: nfs_find_open_context() should use cred_fscmp()
  NFS: nfs_access_get_cached_rcu() should use cred_fscmp()
  NFSv4: pnfs_roc() must use cred_fscmp() to compare creds
  NFS: remove unused macros
  nfs: Return EINVAL rather than ERANGE for mount parse errors
  ...

Pull Documentation fixes from Jonathan Corbet:
 "A handful of small documentation fixes that wandered in"

* tag 'docs-5.6-2' of git://git.lwn.net/linux:
  Allow git builds of Sphinx
  Documentation: changes.rst: update several outdated project URLs
  Documentation: build warnings related to missing blank lines after explicit markups has been fixed
  mailmap: add entry for Tiezhu Yang
  Documentation/ko_KR/howto: Update a broken link
  Documentation/ko_KR/howto: Update broken web addresses
  docs/locking: Fix outdated section names

Pull i2c updates from Wolfram Sang:
 "i2c core:

   - huge improvements and refactorizations of the Linux I2C
     documentation (lots of thanks to Luca for doing it and Jean for the
     careful review)

   - subsystem wide API conversion to i2c_new_client_device()

   - remove obsolete parport-light driver

   - smaller core updates (removal of 'extern', enabling more compile
     testing, use more helper macros)

   - and quite a bunch of driver updates (new IDs, simplifications,
     better PM, support of atomic transfers and other improvements)

  i2c-mux:

   - The main feature is the idle-state rework of the pca954x driver
     from Biwen Li

  at24 driver:

   - minor maintenance: update the license tag, sort headers

   - move support for the write-protect pin into nvmem core

   - add a reference to the new wp-gpios property in nvmem to at25
     bindings

   - add support for regulator and pm_runtime control"

* 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits)
  i2c: cros-ec-tunnel: Fix ACPI identifier
  i2c: cros-ec-tunnel: Fix slave device enumeration
  i2c: stm32f7: add PM_SLEEP suspend/resume support
  i2c: cadence: Fix wording in i2c-cadence driver
  i2c: cadence: Fix power management order of operations
  i2c: cadence: Fix error printing in case of defer
  i2c: cadence: Handle transfer_size rollover
  i2c: i801: Add support for Intel Comet Lake PCH-V
  docs: i2c: writing-clients: properly name the stop condition
  docs: i2c: i2c-protocol: use same wording as smbus-protocol
  docs: i2c: rename sections so the overall picture is clearer
  docs: i2c: old-module-parameters: use monospace instead of ""
  docs: i2c: old-module-parameters: clarify this is for obsolete kernels
  docs: i2c: old-module-parameters: fix internal hyperlink
  docs: i2c: instantiating-devices: use monospace for sysfs attributes
  docs: i2c: instantiating-devices: rearrange static instatiation
  docs: i2c: instantiating-devices: fix internal hyperlink
  docs: i2c: smbus-protocol: improve I2C Block transactions description
  docs: i2c: smbus-protocol: fix punctuation
  docs: i2c: smbus-protocol: fix typo
  ...

Pull more ACPI updates from Rafael Wysocki:
 "Add Hisilicon Hip08-Lite I2C controller clock frequency support to the
  ACPI driver for AMD SoCs (APD) and to the Designware I2C driver
  (Hanjun Guo)"

* tag 'acpi-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  i2c: designware: Add ACPI HID for Hisilicon Hip08-Lite I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip08-Lite I2C controller

Pull more power management updates from Rafael Wysocki:

 - Update the recently merged CPR (Core Power Reduction) support in the
   AVS (Adaptive Voltage Scaling) subsystem (Brendan Higgins, Nathan
   Chancellor, Niklas Cassel)

 - Update the rockchip-io AVS driver (Heiko Stuebner)

 - Add two more module parameters to intel_idle on top of the recently
   merged material (Rafael Wysocki)

 - Clean up a piece of cpuidle documentation and consolidate system
   sleep states documentation (Rafael Wysocki)

* tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: Documentation: Clean up PM QoS description
  Documentation: admin-guide: PM: Update sleep states documentation
  intel_idle: Introduce 'states_off' module parameter
  intel_idle: Introduce 'use_acpi' module parameter
  power: avs: qcom-cpr: Avoid clang -Wsometimes-uninitialized in cpr_scale
  power: avs: qcom-cpr: add unspecified HAS_IOMEM dependency
  PM / AVS: rockchip-io: fix the supply naming for the emmc supply on px30
  power: avs: qcom-cpr: add a printout after the driver has been initialized

Pull drm fixes from Dave Airlie:
 "Just some fixes for this merge window: the tegra changes fix some
  regressions in the merge, nouveau has a few modesetting fixes.

  The amdgpu fixes are bit bigger, but they contain a couple of weeks of
  fixes, and don't seem to contain anything that isn't really a fix.

  Summary:

  tegra:
   - merge window regression fixes

  nouveau:
   - couple of volta/turing modesetting fixes

  amdgpu:
   - EDC fixes for Arcturus
   - GDDR6 memory training fixe
   - Fix for reading gfx clockgating registers while in GFXOFF state
   - i2c freq fixes
   - Misc display fixes
   - TLB invalidation fix when using semaphores
   - VCN 2.5 instancing fixes
   - Switch raven1 gfxoff to a blacklist
   - Coreboot workaround for KV/KB
   - Root cause dongle fixes for display and revert workaround
   - Enable GPU reset for renoir and navi
   - Navi overclocking fixes
   - Fix up confusing warnings in display clock validation on raven

  amdkfd:
   - SDMA fix

  radeon:
   - Misc LUT fixes"

* tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm: (90 commits)
  gpu: host1x: Set DMA direction only for DMA-mapped buffer objects
  drm/tegra: Reuse IOVA mapping where possible
  drm/tegra: Relax IOMMU usage criteria on old Tegra
  drm/amd/dm/mst: Ignore payload update failures
  drm/amdgpu: update default voltage for boot od table for navi1x
  drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage
  drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency
  drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)
  drm/amdgpu: fetch default VDDC curve voltages (v2)
  drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2)
  drm/amdgpu/navi10: add OD_RANGE for navi overclocking
  drm/amdgpu/navi: fix index for OD MCLK
  drm/amd/display: Fix HW/SW state mismatch
  drm/amd/display: Fix a typo when computing dsc configuration
  drm/amd/powerplay: fix navi10 system intermittent reboot issue V2
  drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS mode
  drm/amd/display: Only enable cursor on pipes that need it
  drm/nouveau/kms/gv100-: avoid sending a core update until the first modeset
  drm/nouveau/kms/gv100-: move window ownership setup into modesetting path
  drm/nouveau/disp/gv100-: halt NV_PDISP_FE_RM_INTR_STAT_CTRL_DISP_ERROR storms
  ...

Pull clk fixes from Stephen Boyd:
 "A collection of fixes:

   - Make of_clk.h self contained

   - Fix new qcom DT bindings that just merged to match the DTS files

   - Fix qcom clk driver to properly detect DFS clk frequencies

   - Fix the ls1028a driver to not deref a pointer before assigning it"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  of: clk: Make <linux/of_clk.h> self-contained
  clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks
  clk: qcom: Get rid of the test clock for videocc-sc7180
  dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180
  clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks
  clk: qcom: Get rid of the test clock for gpucc-sc7180
  dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998
  clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks
  clk: qcom: Get rid of the test clock for dispcc-sc7180
  clk: qcom: Get rid of fallback global names for dispcc-sc7180
  dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180
  clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
  clk: ls1028a: fix a dereference of pointer 'parent' before a null check
  dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
  clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()

Pull watchdog updates from Wim Van Sebroeck:

 - add IT8786 chipset ID

 - addition of sam9x60 compatible watchdog

 - da9062 improvements

 - fix UAF in reboot notifier handling in watchdog core code

 - other fixes and small improvements

* tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: da9062: make restart handler atomic safe
  watchdog: mtk_wdt: mt2712: Add reset controller
  watchdog: mtk_wdt: mt8183: Add reset controller
  dt-bindings: mediatek: mt2712: Add #reset-cells
  dt-bindings: mediatek: mt8183: Add #reset-cells
  dt-bindings: watchdog: da9062: add suspend disable option
  watchdog: it87_wdt: add IT8786 ID
  watchdog: dw_wdt: ping watchdog to reset countdown before start
  watchdog: fix UAF in reboot notifier handling in watchdog core code
  watchdog: cadence: Skip printing pointer value
  watchdog: qcom: Use platform_get_irq_optional() for bark irq
  watchdog: da9062: add power management ops
  watchdog: make DesignWare watchdog allow users to set bigger timeout value
  drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
  watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog

Pull virtio updates from Michael Tsirkin:
 "Some bug fixes/cleanups.

  The deprecated scsi passthrough for virtio_blk is removed"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: Fix memory leaks on errors in virtballoon_probe()
  virtio-balloon: Fix memory leak when unloading while hinting is in progress
  virtio_balloon: prevent pfn array overflow
  virtio-blk: remove VIRTIO_BLK_F_SCSI support
  virtio-pci: check name when counting MSI-X vectors
  virtio-balloon: initialize all vq callbacks
  virtio-mmio: convert to devm_platform_ioremap_resource

Pull xtensa updates from Max Filippov:

 - reorganize exception vectors placement

 - small cleanups (drop unused functions/headers/defconfig entries,
   spelling fixes)

* tag 'xtensa-20200206' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: ISS: improve simcall assembly
  xtensa: reorganize vectors placement
  xtensa: separate SMP and XIP support
  xtensa: move fast exception handlers close to vectors
  arch/xtensa: fix Kconfig typos for HAVE_SMP
  xtensa: clean up optional XCHAL_* definitions
  xtensa: drop unused function fast_coprocessor_double
  xtensa: drop empty platform_* functions from platforms
  xtensa: clean up platform headers
  xtensa: drop set_except_vector declaration
  xtensa: configs: Cleanup old Kconfig IO scheduler options

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

called errorfc/infofc/warnfc/invalfc
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Don't bother with "mixed" options that would allow both the
form with and without argument (i.e. both -o foo and -o foo=bar).
Rather than trying to shove both into a single fs_parameter_spec,
allow having with-argument and no-argument specs with the same
name and teach fs_parse to handle that.

There are very few options of that sort, and they are actually
easier to handle that way - callers end up with less postprocessing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The former contains nothing but a pointer to an array of the latter...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... turning it into struct p_log embedded into fs_context.  Initialize
the prefix with fs_type->name, turning fs_parse() into a trivial
inline wrapper for __fs_parse().

This makes fs_parameter_description->name completely unused.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and now errorf() et.al. are never called with NULL fs_context,
so we can get rid of conditional in those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs_parse() analogue taking p_log instead of fs_context.
fs_parse() turned into a wrapper, callers in ceph_common and rbd
switched to __fs_parse().

As the result, fs_parse() never gets NULL fs_context and neither
do fs_context-based logging primitives
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>