- 20 Jul, 2022 1 commit
-
-
Dmitry Torokhov authored
We should not be passing synthetic events (such as autorepeat events) out of order with the events coming from the hardware device, but rather add them to pending events and flush them all at once. This also fixes an issue with timestamps for key release events carrying stale data from the previous autorepeat event. Reviewed-by: Angela Czubak <acz@semihalf.com> Link: https://lore.kernel.org/r/YszNfq4b6MkeoCJC@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 Jul, 2022 1 commit
-
-
Jeff LaBundy authored
Channel events adopt the newly centralized 'linux,code' property; slider events should too. Fixes: 8ac14d2c ("dt-bindings: input: Centralize 'linux,code' definition") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220710024713.17275-1-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 Jul, 2022 1 commit
-
-
Hans de Goede authored
Like on other Acer devices, the wifi, bluetooth and touchpad on/off toggle hotkeys on the Acer AO532 do not send any events when the dritek extensions are not enabled. Add a quirk to enable the dritek extensions on this netbook model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220418200949.6009-1-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 Jul, 2022 12 commits
-
-
Krzysztof Kozlowski authored
Each key device node might have interrupts-extended instead of interrupts property: fsl-ls1028a-kontron-sl28-var1.dtb: buttons0: power-button: 'anyOf' conditional failed, one must be fixed: 'interrupts' is a required property 'gpios' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220705120356.94876-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Krzysztof Kozlowski authored
The original text bindings documented "autorepeat" and "label" properties (in the device node, beside the nodes with keys). DTS use also poll-interval. Reference the input.yaml to get these top-level properties. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220705120356.94876-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Krzysztof Kozlowski authored
The gpio-keys DT schema matches all properties with a wide pattern and applies specific schema to children. This has drawback - all regular properties are also matched and are silently ignored, even if they are not described in schema. Basically this allows any non-object property to be present. Enforce specific naming pattern for children (keys) to narrow the pattern thus do not match other properties. This will require all children to be properly prefixed or suffixed (button, event, switch or key). Removal of "if:" within patternProperties causes drop of one indentation level, but there are no other changes in the affected block. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220705120356.94876-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
Convert the adc-keys binding to DT schema format. The old binding has 'label' as required, but it should never be required given it's just a human readable description. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220608211207.2058487-6-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
Multiple bindings use 'linux,input-type', but there is not a central definition and type. Add 'linux,input-type' to input.yaml and update all the users to use it. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220608211207.2058487-5-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
The common input schema, input.yaml, already defines 'linux,keycodes' property. Update the users to use it. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220608211207.2058487-4-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
Multiple bindings use 'linux,code', but there is not a central definition and type. Add 'linux,code' to input.yaml and update all the users to use it. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Samuel Holland <samuel@sholland.org> Acked-by: Jeff LaBundy <jeff@labundy.com> Acked-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20220608211207.2058487-3-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rob Herring authored
The maximum keycode value for Linux is 0x2ff, not 0xff. There's already users and examples with values greater than 0xff, but the schema is not yet applied in those cases. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220608211207.2058487-2-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mattijs Korpershoek authored
The MediaTek keypad has a total of 6 input rows and 6 input columns. By default, rows/columns 0-2 are enabled. This is controlled by the KP_SEL register: - bits[9:4] control row selection - bits[15:10] control column selection Each bit enables the corresponding row/column number (e.g KP_SEL[4] enables ROW0) Depending on how the keypad is wired, this may result in wrong readings of the keypad state. Program the KP_SEL register to limit the key detection to n_rows, n_cols we retrieve from the device tree. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220707075236.126631-3-mkorpershoek@baylibre.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mattijs Korpershoek authored
The MediaTek keypad has a set of bits representing keys, from KEY0 to KEY77, arranged in 5 chunks of 15 bits split into 5 32-bit registers. In our implementation, we simply decided to use register number as row and offset in the register as column when encoding our "matrix". Because of this, we can have a 5x32 matrix which does not match the hardware at all, which is confusing. Change the row/column calculation to match the hardware. Fixes: f28af984 ("Input: mt6779-keypad - add MediaTek keypad driver") Co-developed-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220707075236.126631-2-mkorpershoek@baylibre.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Werner Sembach authored
A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use. No negative effects could be observed when setting all four. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220708161005.1251929-2-wse@tuxedocomputers.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge with mainline to bring up the latest definition from MFD subsystem needed for Mediatek keypad driver.
-
- 06 Jul, 2022 1 commit
-
-
Andy Shevchenko authored
No need to open code functionality that is provided by the acpi_gpio_get_irq_resource() and acpi_gpio_get_io_resource(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220705180252.963-1-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 03 Jul, 2022 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Looking at the conditional lock acquire functions in the kernel due to the new sparse support (see commit 4a557a5d "sparse: introduce conditional lock acquire function attribute"), it became obvious that the lockref code has a couple of them, but they don't match the usual naming convention for the other ones, and their return value logic is also reversed. In the other very similar places, the naming pattern is '*_and_lock()' (eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the function returns true when the lock is taken. The lockref code is superficially very similar to the refcount code, only with the special "atomic wrt the embedded lock" semantics. But instead of the '*_and_lock()' naming it uses '*_or_lock()'. And instead of returning true in case it took the lock, it returns true if it *didn't* take the lock. Now, arguably the reflock code is quite logical: it really is a "either decrement _or_ lock" kind of situation - and the return value is about whether the operation succeeded without any special care needed. So despite the similarities, the differences do make some sense, and maybe it's not worth trying to unify the different conditional locking primitives in this area. But while looking at this all, it did become obvious that the 'lockref_get_or_lock()' function hasn't actually had any users for almost a decade. The only user it ever had was the shortlived 'd_rcu_to_refcount()' function, and it got removed and replaced with 'lockref_get_not_dead()' back in 2013 in commits 0d98439e ("vfs: use lockred 'dead' flag to mark unrecoverably dead dentries") and e5c832d5 ("vfs: fix dentry RCU to refcounting possibly sleeping dput()") In fact, that single use was removed less than a week after the whole function was introduced in commit b3abd802 ("lockref: add 'lockref_get_or_lock() helper") so this function has been around for a decade, but only had a user for six days. Let's just put this mis-designed and unused function out of its misery. We can think about the naming and semantic oddities of the remaining 'lockref_put_or_lock()' later, but at least that function has users. And while the naming is different and the return value doesn't match, that function matches the whole '{atomic,refcount}_dec_and_test()' pattern much better (ie the magic happens when the count goes down to zero, not when it is incremented from zero). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The kernel tends to try to avoid conditional locking semantics because it makes it harder to think about and statically check locking rules, but we do have a few fundamental locking primitives that take locks conditionally - most obviously the 'trylock' functions. That has always been a problem for 'sparse' checking for locking imbalance, and we've had a special '__cond_lock()' macro that we've used to let sparse know how the locking works: # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) so that you can then use this to tell sparse that (for example) the spinlock trylock macro ends up acquiring the lock when it succeeds, but not when it fails: #define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock)) and then sparse can follow along the locking rules when you have code like if (!spin_trylock(&dentry->d_lock)) return LRU_SKIP; .. sparse sees that the lock is held here.. spin_unlock(&dentry->d_lock); and sparse ends up happy about the lock contexts. However, this '__cond_lock()' use does result in very ugly header files, and requires you to basically wrap the real function with that macro that uses '__cond_lock'. Which has made PeterZ NAK things that try to fix sparse warnings over the years [1]. To solve this, there is now a very experimental patch to sparse that basically does the exact same thing as '__cond_lock()' did, but using a function attribute instead. That seems to make PeterZ happy [2]. Note that this does not replace existing use of '__cond_lock()', but only exposes the new proposed attribute and uses it for the previously unannotated 'refcount_dec_and_lock()' family of functions. For existing sparse installations, this will make no difference (a negative output context was ignored), but if you have the experimental sparse patch it will make sparse now understand code that uses those functions, the same way '__cond_lock()' makes sparse understand the very similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()' annotations. Note that in some cases this will silence existing context imbalance warnings. But in other cases it may end up exposing new sparse warnings for code that sparse just didn't see the locking for at all before. This is a trial, in other words. I'd expect that if it ends up being successful, and new sparse releases end up having this new attribute, we'll migrate the old-style '__cond_lock()' users to use the new-style '__cond_acquires' function attribute. The actual experimental sparse patch was posted in [3]. Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1] Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2] Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3] Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "This fixes some stalling problems and corrects the last of the problems (I hope) observed during testing of the new atomic xattr update feature. - Fix statfs blocking on background inode gc workers - Fix some broken inode lock assertion code - Fix xattr leaf buffer leaks when cancelling a deferred xattr update operation - Clean up xattr recovery to make it easier to understand. - Fix xattr leaf block verifiers tripping over empty blocks. - Remove complicated and error prone xattr leaf block bholding mess. - Fix a bug where an rt extent crossing EOF was treated as "posteof" blocks and cleaned unnecessarily. - Fix a UAF when log shutdown races with unmount" * tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent a UAF when log IO errors race with unmount xfs: dont treat rt extents beyond EOF as eofblocks to be cleared xfs: don't hold xattr leaf buffers across transaction rolls xfs: empty xattr leaf header blocks are not corruption xfs: clean up the end of xfs_attri_item_recover xfs: always free xattri_leaf_bp when cancelling a deferred op xfs: use invalidate_lock to check the state of mmap_lock xfs: factor out the common lock flags assert xfs: introduce xfs_inodegc_push() xfs: bound maximum wait time for inodegc work
-
- 02 Jul, 2022 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Fix NFSD crash during NFSv4.2 READ_PLUS operation - Fix incorrect status code returned by COMMIT operation" * tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix READ_PLUS crasher NFSD: restore EINVAL error translation in nfsd_commit()
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: "Two important fixes for bugs in code which was added in 5.18: - Fix userspace signal failures on 32-bit kernel due to a bug in vDSO - Fix 32-bit load-word unalignment exception handler which returned wrong values" * tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix vDSO signal breakage on 32-bit kernel parisc/unaligned: Fix emulate_ldw() breakage
-
Helge Deller authored
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc signal testcases on a 32-bit kernel. The trampoline code (sigtramp.S) which is mapped into userspace includes an offset to the context data on the stack, which is used by gdb and glibc to get access to registers. In a 32-bit kernel we used by mistake the offset into the compat context (which is valid on a 64-bit kernel only) instead of the offset into the "native" 32-bit context. Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Fixes: df24e178 ("parisc: Add vDSO support") CC: stable@vger.kernel.org # 5.18 Signed-off-by: Helge Deller <deller@gmx.de>
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - BPF program info linear (BPIL) data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. Fix it, Found using -fsanitize=undefined. - Fix 'perf offcpu' build on old kernels wrt task_struct's state/__state field. - Fix perf_event_attr.sample_type setting on the 'offcpu-time' event synthesized by the 'perf offcpu' tool. - Don't bail out when synthesizing PERF_RECORD_ events for pre-existing threads when one goes away while parsing its procfs entries. - Don't sort the task scan result from /proc, its not needed and introduces bugs when the main thread isn't the first one to be processed. - Fix uninitialized 'offset' variable on aarch64 in the unwind code. - Sync KVM headers with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf synthetic-events: Ignore dead threads during event synthesis perf synthetic-events: Don't sort the task scan result from /proc perf unwind: Fix unitialized 'offset' variable on aarch64 tools headers UAPI: Sync linux/kvm.h with the kernel sources perf bpf: 8 byte align bpil data tools kvm headers arm64: Update KVM headers from the kernel sources perf offcpu: Accept allowed sample types only perf offcpu: Fix build failure on old kernels
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t. - Fix virt_addr_valid() when memory is hotplugged above the boot-time high_memory value. - Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly allocate a PMD page at PUD level. - Fix a couple of minor issues found since we enabled KASAN for 64-bit Book3S. Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao. * tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/memhotplug: Add add_pages override for PPC powerpc/bpf: Fix use of user_pt_regs in uapi powerpc/prom_init: Fix kernel config grep powerpc/book3e: Fix PUD allocation size in map_kernel_page() powerpc/xive/spapr: correct bitmap allocation size
-
Namhyung Kim authored
When it synthesize various task events, it scans the list of task first and then accesses later. There's a window threads can die between the two and proc entries may not be available. Instead of bailing out, we can ignore that thread and move on. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220701205458.985106-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
It should not sort the result as procfs already returns a proper ordering of tasks. Actually sorting the order caused problems that it doesn't guararantee to process the main thread first. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220701205458.985106-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ivan Babrou authored
Commit dc2cf4ca ("perf unwind: Fix segbase for ld.lld linked objects") uncovered the following issue on aarch64: util/unwind-libunwind-local.c: In function 'find_proc_info': util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 386 | if (ofs > 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 371 | if (ofs <= 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 363 | if (ofs <= 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ In file included from util/libunwind/arm64.c:37: Fixes: dc2cf4ca ("perf unwind: Fix segbase for ld.lld linked objects") Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: kernel-team@cloudflare.com Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220701182046.12589-1-ivan@cloudflare.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 Jul, 2022 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Vishal Verma: - Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver where accounting for poison blocks to be cleared was off by one, causing a failure to clear the the last badblock in an nvdimm region. * tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Fix badblocks clear off-by-one error
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fix from Rafael Wysocki: "Add a new CPU ID to the list of supported processors in the intel_tcc_cooling driver (Sumeet Pawnikar)" * tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix some issues in cpufreq drivers and some issues in devfreq: - Fix error code path issues related PROBE_DEFER handling in devfreq (Christian Marangi) - Revert an editing accident in SPDX-License line in the devfreq passive governor (Lukas Bulwahn) - Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu devfreq driver (Miaoqian Lin) - Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang) - Fix missing of_node_put for qoriq and pmac32 driver (Liang He) - Fix issues around throttle interrupt for qcom driver (Stephen Boyd) - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno) - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)" * tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: passive: revert an editing accident in SPDX-License line PM / devfreq: Fix kernel warning with cpufreq passive register fail PM / devfreq: Rework freq_table to be local to devfreq struct PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER PM / devfreq: Mute warning on governor PROBE_DEFER PM / devfreq: Fix kernel panic with cpu based scaling to passive gov cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c cpufreq: amd-pstate: Add resume and suspend callbacks
-
Rafael J. Wysocki authored
Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the following one: - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su). * pm-cpufreq: cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c cpufreq: amd-pstate: Add resume and suspend callbacks
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix error handling in ibmaem driver initialization - Fix bad data reported by occ driver after setting power cap - Fix typos in pmbus/ucd9200 driver comments * tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails hwmon: (pmbus/ucd9200) fix typos in comments hwmon: (occ) Prevent power cap command overwriting poll response
-
Yang Yingliang authored
If platform_device_add() fails, it no need to call platform_device_del(), split platform_device_unregister() into platform_device_del/put(), so platform_device_put() can be called separately. Fixes: 8808a793 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Restore TLB invalidation for the 'break-before-make' rule on contiguous ptes (missed in a recent clean-up)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Alexander Gordeev: - Fix purgatory build process so bin2c tool does not get built unnecessarily and the Makefile is more consistent with other architectures. - Return earlier simple design of arch_get_random_seed_long|int() and arch_get_random_long|int() callbacks as result of changes in generic RNG code. - Fix minor comment typos and spelling mistakes. * tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: Fix spelling mistake s390/sclp: Fix typo in comments s390/archrandom: simplify back to earlier design and initialize earlier s390/purgatory: remove duplicated build rule of kexec-purgatory.o s390/purgatory: hard-code obj-y in Makefile s390: remove unneeded 'select BUILD_BIN2C'
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: - Allocate a fattr for _nfs4_discover_trunking() - Fix module reference count leak in nfs4_run_state_manager() * tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4: Add an fattr allocation to _nfs4_discover_trunking() NFS: restore module put when manager exits.
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A ceph filesystem fix, marked for stable. There appears to be a deeper issue on the MDS side, but for now we are going with this one-liner to avoid busy looping and potential soft lockups" * tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client: ceph: wait on async create before checking caps for syncfs
-
Linus Torvalds authored
Merge tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Three fixes for invalid memory accesses discovered by using KASAN while running the lvm2 testsuite's dm-raid tests. Includes changes to MD's raid5.c given the dependency dm-raid has on the MD code" * tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix KASAN warning in raid5_add_disks dm raid: fix KASAN warning in raid5_remove_disk dm raid: fix accesses beyond end of raid member array
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Two minor tweaks: - While we still can, adjust the send/recv based flags to be in ->ioprio rather than in ->addr2. This is consistent with eg accept, and also doesn't waste a full 64-bit field for flags (Pavel) - 5.18-stable fix for re-importing provided buffers. Not much real world relevance here as it'll only impact non-pollable files gone async, which is more of a practical test case rather than something that is used in the wild (Dylan)" * tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block: io_uring: fix provided buffer import io_uring: keep sendrecv flags in ioprio
-