Add an initial device tree for the SM6375 (SD695) SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107120920.12593-3-konrad.dybcio@linaro.org

Add a compatible for Kryo 660 CPUs found in at least Qualcomm SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107120920.12593-1-konrad.dybcio@linaro.org

Update the fingerprint node on Trogdor to match the fingerprint DT
binding. This will allow us to drive the reset and boot gpios from the
driver when it is re-attached after flashing. We'll also be able to boot
the fingerprint processor if the BIOS isn't doing it for us.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107191535.624371-3-swboyd@chromium.org

Update the fingerprint node on Herobrine to match the fingerprint DT
binding. This will allow us to drive the reset and boot gpios from the
driver when it is re-attached after flashing. We'll also be able to boot
the fingerprint processor if the BIOS isn't doing it for us.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107191535.624371-2-swboyd@chromium.org

Downstream sources confirm sm6125 supports CQE, and after fixing the
reg name for this range [1] this feature probes and enables correctly:

    [    0.391950] sdhci_msm 4744000.mmc: mmc0: CQE init: success

[1]: https://lore.kernel.org/all/20221026163646.37433-1-krzysztof.kozlowski@linaro.org/Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107214702.311271-1-marijn.suijten@somainline.org

SM6125 comes with SDCC (SDHCI controller) v5, so the second range of
registers is cqhci, not core.

Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # Sony Xperia 10 II
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026163646.37433-1-krzysztof.kozlowski@linaro.org

The spmi-pmic bindings say that pm8941-coincell should be called
'charger'.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221031175119.939860-3-luca@z3ntu.xyz

Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-12-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-11-konrad.dybcio@linaro.org

Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-10-konrad.dybcio@linaro.org

Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.

Also, trim off downstream regulator properties from comments to prevent
them from accidentally landing into mainline one day..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-9-konrad.dybcio@linaro.org

Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.

Also, fix up some whitespace within comments.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-8-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */.
Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-7-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-6-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */ and fix up the contents of some.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-5-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */ and fix up the contents of some.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-4-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */ and fix up the contents of some.
Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Also, fix up a single raw '2' to PM8994_GPIO_S4 while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-3-konrad.dybcio@linaro.org

Switch '//' comments to C-style /* */ and fix up the contents of some.
Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107145522.6706-2-konrad.dybcio@linaro.org

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104161131.57719-1-krzysztof.kozlowski@linaro.org

Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
harcoding the cell value.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107092930.33325-3-robimarko@gmail.com

Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
harcoding the cell value.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107092930.33325-2-robimarko@gmail.com

Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107092930.33325-1-robimarko@gmail.com

Use my new Linaro address in place of my SoMainline one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107092207.5832-1-konrad.dybcio@linaro.org

Update the USB MP QMP PHY nodes to match the new binding which
specifically includes the missing register regions (e.g. PCS_USB).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107081705.18446-1-johan+linaro@kernel.org

arm64: dts: qcom: sc7280: sort out the "Status" to last property with sc7280-herobrine-audio-rt5682.dtsi

To keep diffs clean, sort out "Status" to last property.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107173954.v11.5.I4c6d97e6f3cf8cdc691d2d4519883c3018dd4372@changeid

add specific 3mic setting as sc7280-herobrine-audio-rt5682-3mic.dtsi,
so we can include sc7280-herobrine-audio-rt5682-3mic.dtsi for evoker
as it uses rt5682 with 3 mics.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107173954.v11.4.I9718ac3622fa550e432209ae5c95c87b873a0f87@changeid

Change touchpad and touchscreen node for evoker
Touchpad: SA461D-1011
Touchscreen: GT7986U
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107173954.v11.3.I3ac715e729f6f9b5a3e3001b155df4f9d14e6186@changeid

evoker have wifi/lte sku, add different dts for each sku.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107173954.v11.2.If03e9e85e63ece4b1599db841c90ed785c47a4be@changeid

Use the node name as now defined in the spmi-pmic bindings.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221031173933.936147-3-luca@z3ntu.xyz

Pass XO and sleep clocks to the GCC controller so it does not have to
find them by matching globaly by name.

If not passed directly, driver maintains backwards compatibility by then
falling back to global lookup.

Since we are here, set cell numbers in decimal instead of hex.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030175703.1103224-3-robimarko@gmail.com

Link dsi1_phy as a clock provider of "dsi1pll" and "dsi1pllbyte" clocks
to the MMCC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030161612.95471-2-dmitry.baryshkov@linaro.org

Link hdmi_phy as a clock provider of "hdmipll" clock to the MMCC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030161612.95471-1-dmitry.baryshkov@linaro.org

When enabling the APPS SMMU the mainline driver reconfigures the SMMU
from its bootloader configuration, losing the stream mapping for (among
which) the SDHCI hardware and breaking its ADMA feature.  This feature
can be disabled with:

    sdhci.debug_quirks=0x40

But it is of course desired to have this feature enabled and working
through the SMMU.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-11-marijn.suijten@somainline.org

Use the generic samsung,s6sy761 touchscreen driver for this device,
together with a few pins and regulators to power it up correctly.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-10-marijn.suijten@somainline.org

Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes
later.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-9-marijn.suijten@somainline.org

Without power the SDCard slot / hardware remains dormant.

Like many other platforms these regulators are used exclusively by
SDHCI, and have their maximum voltage decreased to what downstream sets
on the consumer side.  Additionally the SDHCI driver supports setting a
load, for which the regulator definition is extended much the same.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-8-marijn.suijten@somainline.org

This regulator configuration was adopted from downstream, and is
identical to the sm7225 FairPhone 4 configuration bar pm6350_l8a.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-7-marijn.suijten@somainline.org

Include pm6350 to inherit its GPIO and button configuration, and
configure "resin" to serve as volume up, and gpio2 as volume down.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-6-marijn.suijten@somainline.org

Make pm6350.dtsi self-contained by including input.h, needed for the
KEY_POWER constant used to define the power key.

Fixes: d8a3c775 ("arm64: dts: qcom: Add PM6350 PMIC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-5-marijn.suijten@somainline.org

In addition to the sdc2 pins, set the SD Card Detect pin in a sane state
to be used as an interrupt when an SD Card is slotted in or removed.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-4-marijn.suijten@somainline.org