- 20 May, 2017 17 commits
-
-
Alexey Brodkin authored
commit 3d615964 upstream. DWC3 driver uses of_usb_get_phy_mode() which is implemented in drivers/usb/phy/of.c and in bare minimal configuration it might not be pulled in kernel binary. In case of ARC or ARM this could be easily reproduced with "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. On building all ends-up with: ---------------------->8------------------ Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 5 modules ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 ---------------------->8------------------ Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Romain Izard authored
commit 6e253d0f upstream. With commit bc49d1d1 ("usb: gadget: don't couple configfs to legacy gadgets"),it is possible to build a modular kernel with both built-in configfs support and modular legacy gadget drivers. But when building a kernel without modules, it is also necessary to be able to build with configfs but without any legacy gadget driver. This was a possible configuration when the USB_CONFIGFS was a part of the choice options, but not anymore. Mark the choice for legacy gadget drivers as optional restores this. Fixes: bc49d1d1 ("usb: gadget: don't couple configfs to legacy gadgets") Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 2c930e3d upstream. Add missing continue in switch. Addresses-Coverity-ID: 1248733 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ian Abbott authored
commit 8ec04a49 upstream. The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by checking whether the absolute value of `jiffies` (stored in local variable `now`) is greater than the expected expiry time in jiffy units. This will fail when `jiffies` wraps around. Also, it seems to make sense to handle the expiry one jiffy earlier than the current test. Use `time_after_eq()` to check for expiry. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit 45292be0 upstream. For some reason, the driver does not consider allocation of the subdevice private data to be a fatal error when attaching the COMEDI device. It tests the subdevice private data pointer for validity at certain points, but omits some crucial tests. In particular, `jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and initialize the subdevice private data, but the same function subsequently dereferences the pointer to access the `next_time_min` and `next_time_max` members without checking it first. The other missing test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will crash before it gets that far. Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`. The COMEDI core will subsequently call `jr3_pci_detach()` to clean up. Signed-off-by:
-
Johan Hovold authored
commit b58f45c8 upstream. Make sure to deregister the USB driver before releasing the tty driver to avoid use-after-free in the USB disconnect callback where the tty devices are deregistered. Fixes: 61e12104 ("staging: gdm7240: adding LTE USB driver") Cc: Won Kang <wkang77@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit 12ecd24e upstream. Since 4.9 mandated USB buffers be heap allocated this causes the driver to fail. Since there is a wide range of buffer sizes use kmemdup to create allocated buffer. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 05c0cf88 upstream. Since 4.9 mandated USB buffers to be heap allocated. This causes the driver to fail. Create buffer for USB transfers. Signed-off-by:
-
Bjørn Mork authored
commit 19445816 upstream. This reverts commit 833415a3 ("cdc-wdm: fix "out-of-sync" due to missing notifications") There have been several reports of wdm_read returning unexpected EIO errors with QMI devices using the qmi_wwan driver. The reporters confirm that reverting prevents these errors. I have been unable to reproduce the bug myself, and have no explanation to offer either. But reverting is the safe choice here, given that the commit was an attempt to work around a firmware problem. Living with a firmware problem is still better than adding driver bugs. Reported-by:
Kasper Holtze <kasper@holtze.dk> Reported-by:
Aleksander Morgado <aleksander@aleksander.es> Reported-by:
Daniele Palmas <dnlplm@gmail.com> Fixes: 833415a3 ("cdc-wdm: fix "out-of-sync" due to missing notifications") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Ajay Kaher authored
USB: Proper handling of Race Condition when two USB class drivers try to call init_usb_class simultaneously commit 2f86a96b upstream. There is race condition when two USB class drivers try to call init_usb_class at the same time and leads to crash. code path: probe->usb_register_dev->init_usb_class To solve this, mutex locking has been added in init_usb_class() and destroy_usb_class(). As pointed by Alan, removed "if (usb_class)" test from destroy_usb_class() because usb_class can never be NULL there. Signed-off-by:
Ajay Kaher <ajay.kaher@samsung.com> Acked-by:
-
Marek Vasut authored
commit 31c5d192 upstream. This development kit has an FT4232 on it with a custom USB VID/PID. The FT4232 provides four UARTs, but only two are used. The UART 0 is used by the FlashPro5 programmer and UART 2 is connected to the SmartFusion2 CortexM3 SoC UART port. Note that the USB VID is registered to Actel according to Linux USB VID database, but that was acquired by Microsemi. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Peter Chen authored
commit 6fc091fb upstream. Print correct command ring address using 'val_64'. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
commit 69307ccb upstream. As per [1] issue #4, "The periodic EP scheduler always tries to schedule the EPs that have large intervals (interval equal to or greater than 128 microframes) into different microframes. So it maintains an internal counter and increments for each large interval EP added. When the counter is greater than 128, the scheduler rejects the new EP. So when the hub re-enumerated 128 times, it triggers this condition." This results in Bandwidth error when devices with periodic endpoints (ISO/INT) having bInterval > 7 are plugged and unplugged several times on a TUSB73x0 XHCI host. Workaround this issue by limiting the bInterval to 7 (i.e. interval to 6) for High-speed or faster periodic endpoints. [1] - http://www.ti.com/lit/er/sllz076/sllz076.pdfSigned-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 197b806a upstream. While testing modification of per se_node_acl queue_depth forcing session reinstatement via lio_target_nacl_cmdsn_depth_store() -> core_tpg_set_initiator_node_queue_depth(), a hung task bug triggered when changing cmdsn_depth invoked session reinstatement while an iscsi login was already waiting for session reinstatement to complete. This can happen when an outstanding se_cmd descriptor is taking a long time to complete, and session reinstatement from iscsi login or cmdsn_depth change occurs concurrently. To address this bug, explicitly set session_fall_back_to_erl0 = 1 when forcing session reinstatement, so session reinstatement is not attempted if an active session is already being shutdown. This patch has been tested with two scenarios. The first when iscsi login is blocked waiting for iscsi session reinstatement to complete followed by queue_depth change via configfs, and second when queue_depth change via configfs us blocked followed by a iscsi login driven session reinstatement. Note this patch depends on commit d36ad77f to handle multiple sessions per se_node_acl when changing cmdsn_depth, and for pre v4.5 kernels will need to be included for stable as well. Reported-by:
Gary Guo <ghg@datera.io> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Bart Van Assche authored
commit 59ac9c07 upstream. This patch fixes zero-length READ and WRITE handling in target/FILEIO, which was broken a long time back by: Since: commit d81cb447 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Sep 17 16:36:11 2012 -0700 target: go through normal processing for all zero-length commands which moved zero-length READ and WRITE completion out of target-core, to doing submission into backend driver code. To address this, go ahead and invoke target_complete_cmd() for any non negative return value in fd_do_rw(). Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Nicholas Bellinger authored
commit a71a5dc7 upstream. Following the bugfix for handling non SAM_STAT_GOOD COMPARE_AND_WRITE status during COMMIT phase in commit 9b2792c3, the same bug exists for the READ phase as well. This would manifest first as a lost SCSI response, and eventual hung task during fabric driver logout or re-login, as existing shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref to reach zero. To address this bug, compare_and_write_callback() has been changed to set post_ret = 1 and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE as necessary to signal failure status. Reported-by:
Bill Borsari <wgb@datera.io> Cc: Bill Borsari <wgb@datera.io> Tested-by:
-
Juergen Gross authored
commit 69861e0a upstream. When booted as pv-guest the p2m list presented by the Xen is already mapped to virtual addresses. In dom0 case the hypervisor might make use of 2M- or 1G-pages for this mapping. Unfortunately while being properly aligned in virtual and machine address space, those pages might not be aligned properly in guest physical address space. So when trying to obtain the guest physical address of such a page pud_pfn() and pmd_pfn() must be avoided as those will mask away guest physical address bits not being zero in this special case. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
- 14 May, 2017 23 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit 19b7ccf8 upstream. Commit 25520d55 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> [idryomov@gmail.com: backport to < 4.11: bdi is embedded in queue] Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Nicolai Hähnle authored
commit 3089c1df upstream. The vm fault handler relies on the fact that the VMA owns a reference to the BO. However, once mmap_sem is released, other tasks are free to destroy the VMA, which can lead to the BO being freed. Fix two code paths where that can happen, both related to vm fault retries. Found via a lock debugging warning which flagged &bo->wu_mutex as locked while being destroyed. Fixes: cbe12e74 ("drm/ttm: Allow vm fault retries") Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Maxim Altshul authored
commit e7ee74b5 upstream. This event is used by the Firmware to limit the RX BA win size for a specific link. The event handler updates the new size in the mac's sta->sta struct. BA sessions opened for that link will use the new restricted win_size. This limitation remains until a new update is received or until the link is closed. Signed-off-by:
Maxim Altshul <maxim.altshul@ti.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Maxim Altshul authored
commit 42c7372a upstream. When starting a new BA session, we must pass the win_size to the FW. To do this we take max_rx_aggregation_subframes (BA RX win size) which is stored in ieee80211_sta structure (e.g per link and not per HW) We will use the value stored per link when passing the win_size to firmware through the ACX_BA_SESSION_RX_SETUP command. Signed-off-by:
-
Boris Ostrovsky authored
commit 84d582d2 upstream. Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741) established that commit 72a9b186 ("xen: Remove event channel notification through Xen PCI platform device") (and thus commit da72ff5b ("partially revert "xen: Remove event channel notification through Xen PCI platform device"")) are unnecessary and, in fact, prevent HVM guests from booting on Xen releases prior to 4.0 Therefore we revert both of those commits. The summary of that discussion is below: Here is the brief summary of the current situation: Before the offending commit (72a9b186): 1) INTx does not work because of the reset_watches path. 2) The reset_watches path is only taken if you have Xen > 4.0 3) The Linux Kernel by default will use vector inject if the hypervisor support. So even INTx does not work no body running the kernel with Xen > 4.0 would notice. Unless he explicitly disabled this feature either in the kernel or in Xen (and this can only be disabled by modifying the code, not user-supported way to do it). After the offending commit (+ partial revert): 1) INTx is no longer support for HVM (only for PV guests). 2) Any HVM guest The kernel will not boot on Xen < 4.0 which does not have vector injection support. Since the only other mode supported is INTx which. So based on this summary, I think before commit (72a9b186) we were in much better position from a user point of view. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
-
Jin Qian authored
commit b9dd4618 upstream. F2FS uses 4 bytes to represent block address. As a result, supported size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments. Signed-off-by:
Jin Qian <jinqian@google.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jon Mason authored
[ Upstream commit 922c60e8 ] If an error is encountered in mdio_mux_init(), the error path will call mdiobus_free(). Since mdiobus_register() has been called prior to mdio_mux_init(), the bus->state will not be MDIOBUS_UNREGISTERED. This causes a BUG_ON() in mdiobus_free(). To correct this issue, add an error path for mdio_mux_init() which calls mdiobus_unregister() prior to mdiobus_free(). Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: 98bc865a ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 0d0e5769 ] The patch fixes two things at once: 1) It checks the env->allow_ptr_leaks and only prints the map address to the log if we have the privileges to do so, otherwise it just dumps 0 as we would when kptr_restrict is enabled on %pK. Given the latter is off by default and not every distro sets it, I don't want to rely on this, hence the 0 by default for unprivileged. 2) Printing of ldimm64 in the verifier log is currently broken in that we don't print the full immediate, but only the 32 bit part of the first insn part for ldimm64. Thus, fix this up as well; it's okay to access, since we verified all ldimm64 earlier already (including just constants) through replace_map_fd_with_map_ptr(). Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: cbd35700 ("bpf: verifier (add ability to receive verification log)") Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ac45bd93 ] We have the number of longs, but we need to calculate the number of bytes required. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 242d3a49 ] For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933 ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by:
David Ahern <dsahern@gmail.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 2f460933 ] Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 77ef033b ] IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0. Otherwise libnl3 fails to validate netlink messages with this attribute. "ip -detail a" assumes too that the attribute is NUL-terminated when printing it. It often was, due to padding. I noticed this as libvirtd failing to start on a system with sfc driver after upgrading it to Linux 4.11, i.e. when sfc added support for phys_port_name. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 86f4c90a ] raw_send_hdrinc() and rawv6_send_hdrinc() expect that the buffer copied from the userspace contains the IPv4/IPv6 header, so if too few bytes are copied, parts of the header may remain uninitialized. This bug has been detected with KMSAN. For the record, the KMSAN report: ================================================================== BUG: KMSAN: use of unitialized memory in nf_ct_frag6_gather+0xf5a/0x44a0 inter: 0 CPU: 0 PID: 1036 Comm: probe Not tainted 4.11.0-rc5+ #2455 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x16b/0x1e0 mm/kmsan/kmsan.c:1078 __kmsan_warning_32+0x5c/0xa0 mm/kmsan/kmsan_instr.c:510 nf_ct_frag6_gather+0xf5a/0x44a0 net/ipv6/netfilter/nf_conntrack_reasm.c:577 ipv6_defrag+0x1d9/0x280 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn ./include/linux/netfilter.h:102 nf_hook_slow+0x13f/0x3c0 net/netfilter/core.c:310 nf_hook ./include/linux/netfilter.h:212 NF_HOOK ./include/linux/netfilter.h:255 rawv6_send_hdrinc net/ipv6/raw.c:673 rawv6_sendmsg+0x2fcb/0x41a0 net/ipv6/raw.c:919 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696 SyS_sendto+0xbc/0xe0 net/socket.c:1664 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x436e03 RSP: 002b:00007ffce48baf38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000436e03 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffce48baf90 R08: 00007ffce48baf50 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000401790 R14: 0000000000401820 R15: 0000000000000000 origin: 00000000d9400053 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:362 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:257 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:270 slab_alloc_node mm/slub.c:2735 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4341 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 alloc_skb_with_frags+0x209/0xbc0 net/core/skbuff.c:4678 sock_alloc_send_pskb+0x9ff/0xe00 net/core/sock.c:1903 sock_alloc_send_skb+0xe4/0x100 net/core/sock.c:1920 rawv6_send_hdrinc net/ipv6/raw.c:638 rawv6_sendmsg+0x2918/0x41a0 net/ipv6/raw.c:919 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696 SyS_sendto+0xbc/0xe0 net/socket.c:1664 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== , triggered by the following syscalls: socket(PF_INET6, SOCK_RAW, IPPROTO_RAW) = 3 sendto(3, NULL, 0, 0, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "ff00::", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EPERM A similar report is triggered in net/ipv4/raw.c if we use a PF_INET socket instead of a PF_INET6 one. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8b485ce6 ] Under fuzzer stress, it is possible that a child gets a non NULL fastopen_req pointer from its parent at accept() time, when/if parent morphs from listener to active session. We need to make sure this can not happen, by clearing the field after socket cloning. BUG: Double free or freeing an invalid pointer Unexpected shadow byte: 0xFB CPU: 3 PID: 20933 Comm: syz-executor3 Not tainted 4.11.0+ #306 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x292/0x395 lib/dump_stack.c:52 kasan_object_err+0x1c/0x70 mm/kasan/report.c:164 kasan_report_double_free+0x5c/0x70 mm/kasan/report.c:185 kasan_slab_free+0x9d/0xc0 mm/kasan/kasan.c:580 slab_free_hook mm/slub.c:1357 [inline] slab_free_freelist_hook mm/slub.c:1379 [inline] slab_free mm/slub.c:2961 [inline] kfree+0xe8/0x2b0 mm/slub.c:3882 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline] tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328 inet_child_forget+0xb8/0x600 net/ipv4/inet_connection_sock.c:898 inet_csk_reqsk_queue_add+0x1e7/0x250 net/ipv4/inet_connection_sock.c:928 tcp_get_cookie_sock+0x21a/0x510 net/ipv4/syncookies.c:217 cookie_v4_check+0x1a19/0x28b0 net/ipv4/syncookies.c:384 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1384 [inline] tcp_v4_do_rcv+0x731/0x940 net/ipv4/tcp_ipv4.c:1421 tcp_v4_rcv+0x2dc0/0x31c0 net/ipv4/tcp_ipv4.c:1715 ip_local_deliver_finish+0x4cc/0xc20 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:257 [inline] ip_local_deliver+0x1ce/0x700 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:492 [inline] ip_rcv_finish+0xb1d/0x20b0 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:257 [inline] ip_rcv+0xd8c/0x19c0 net/ipv4/ip_input.c:487 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4210 __netif_receive_skb+0x2a/0x1a0 net/core/dev.c:4248 process_backlog+0xe5/0x6c0 net/core/dev.c:4868 napi_poll net/core/dev.c:5270 [inline] net_rx_action+0xe70/0x18e0 net/core/dev.c:5335 __do_softirq+0x2fb/0xb99 kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:899 </IRQ> do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x1cf/0x1e0 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:931 [inline] ip_finish_output2+0x9ab/0x15e0 net/ipv4/ip_output.c:230 ip_finish_output+0xa35/0xdf0 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f6/0x7b0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x9a8/0x1a10 net/ipv4/ip_output.c:503 tcp_transmit_skb+0x1ade/0x3470 net/ipv4/tcp_output.c:1057 tcp_write_xmit+0x79e/0x55b0 net/ipv4/tcp_output.c:2265 __tcp_push_pending_frames+0xfa/0x3a0 net/ipv4/tcp_output.c:2450 tcp_push+0x4ee/0x780 net/ipv4/tcp.c:683 tcp_sendmsg+0x128d/0x39b0 net/ipv4/tcp.c:1342 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x446059 RSP: 002b:00007faa6761fb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 0000000000446059 RDX: 0000000000000001 RSI: 0000000020ba3fcd RDI: 0000000000000017 RBP: 00000000006e40a0 R08: 0000000020ba4ff0 R09: 0000000000000010 R10: 0000000020000000 R11: 0000000000000282 R12: 0000000000708150 R13: 0000000000000000 R14: 00007faa676209c0 R15: 00007faa67620700 Object at ffff88003b5bbcb8, in cache kmalloc-64 size: 64 Allocated: PID = 20909 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:513 set_track mm/kasan/kasan.c:525 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:616 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2745 kmalloc include/linux/slab.h:490 [inline] kzalloc include/linux/slab.h:663 [inline] tcp_sendmsg_fastopen net/ipv4/tcp.c:1094 [inline] tcp_sendmsg+0x221a/0x39b0 net/ipv4/tcp.c:1139 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed: PID = 20909 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:513 set_track mm/kasan/kasan.c:525 [inline] kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:589 slab_free_hook mm/slub.c:1357 [inline] slab_free_freelist_hook mm/slub.c:1379 [inline] slab_free mm/slub.c:2961 [inline] kfree+0xe8/0x2b0 mm/slub.c:3882 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline] tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328 __inet_stream_connect+0x20c/0xf90 net/ipv4/af_inet.c:593 tcp_sendmsg_fastopen net/ipv4/tcp.c:1111 [inline] tcp_sendmsg+0x23a8/0x39b0 net/ipv4/tcp.c:1139 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 7db92362 ("tcp: fix potential double free issue for fastopen_req") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit 4c54dc02 ] This patch adds support for Telit ME910 PID 0x1100. Signed-off-by:
-
David Ahern authored
[ Upstream commit 6d717134 ] Andrey reported a warning triggered by the rcu code: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289 debug_print_object+0x175/0x210 ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) Modules linked in: CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x192/0x22d lib/dump_stack.c:52 __warn+0x19f/0x1e0 kernel/panic.c:549 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564 debug_print_object+0x175/0x210 lib/debugobjects.c:286 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442 debug_rcu_head_queue kernel/rcu/rcu.h:75 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288 rt6_rcu_free net/ipv6/ip6_fib.c:158 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188 fib6_del_route net/ipv6/ip6_fib.c:1461 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672 ... Andrey's reproducer program runs in a very tight loop, calling 'unshare -n' and then spawning 2 sets of 14 threads running random ioctl calls. The relevant networking sequence: 1. New network namespace created via unshare -n - ip6tnl0 device is created in down state 2. address added to ip6tnl0 - equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1 - DAD is started on the address and when it completes the host route is inserted into the FIB 3. ip6tnl0 is brought up - the new fixup_permanent_addr function restarts DAD on the address 4. exit namespace - teardown / cleanup sequence starts - once in a blue moon, lo teardown appears to happen BEFORE teardown of ip6tunl0 + down on 'lo' removes the host route from the FIB since the dst->dev for the route is loobback + host route added to rcu callback list * rcu callback has not run yet, so rt is NOT on the gc list so it has NOT been marked obsolete 5. in parallel to 4. worker_thread runs addrconf_dad_completed - DAD on the address on ip6tnl0 completes - calls ipv6_ifa_notify which inserts the host route All of that happens very quickly. The result is that a host route that has been deleted from the IPv6 FIB and added to the RCU list is re-inserted into the FIB. The exit namespace eventually gets to cleaning up ip6tnl0 which removes the host route from the FIB again, calls the rcu function for cleanup -- and triggers the double rcu trace. The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably, DAD should not be started in step 2. The interface is in the down state, so it can not really send out requests for the address which makes starting DAD pointless. Since the second DAD was introduced by a recent change, seems appropriate to use it for the Fixes tag and have the fixup function only start DAD for addresses in the PREDAD state which occurs in addrconf_ifdown if the address is retained. Big thanks to Andrey for isolating a reliable reproducer for this problem. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by:
-
Eric Dumazet authored
[ Upstream commit a9f11f96 ] Be careful when comparing tcp_time_stamp to some u32 quantity, otherwise result can be surprising. Fixes: 7c106d7e ("[TCP]: TCP Low Priority congestion control") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit ddc665a4 ] When the instruction right before the branch destination is a 64 bit load immediate, we currently calculate the wrong jump offset in the ctx->offset[] array as we only account one instruction slot for the 64 bit load immediate although it uses two BPF instructions. Fix it up by setting the offset into the right slot after we incremented the index. Before (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 54ffff82 b.cs 0x00000020 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] After (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 540000a2 b.cs 0x00000044 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] Also, add a couple of test cases to make sure JITs pass this test. Tested on Cavium ThunderX ARMv8. The added test cases all pass after the fix. Fixes: 8eee539d ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by:
-
Yonghong Song authored
[ Upstream commit 332270fd ] llvm 4.0 and above generates the code like below: .... 440: (b7) r1 = 15 441: (05) goto pc+73 515: (79) r6 = *(u64 *)(r10 -152) 516: (bf) r7 = r10 517: (07) r7 += -112 518: (bf) r2 = r7 519: (0f) r2 += r1 520: (71) r1 = *(u8 *)(r8 +0) 521: (73) *(u8 *)(r2 +45) = r1 .... and the verifier complains "R2 invalid mem access 'inv'" for insn #521. This is because verifier marks register r2 as unknown value after #519 where r2 is a stack pointer and r1 holds a constant value. Teach verifier to recognize "stack_ptr + imm" and "stack_ptr + reg with const val" as valid stack_ptr with new offset. Signed-off-by:
Yonghong Song <yhs@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 7162fb24 ] Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket over loopback interface. I believe one issue with looped skbs is that tcp_trim_head() can end up producing skb with under estimated truesize. It hardly matters for normal conditions, since packets sent over loopback are never truncated. Bytes trimmed from skb->head should not change skb truesize, since skb->head is not reallocated. Signed-off-by:
-
Jason A. Donenfeld authored
[ Upstream commit 5294b830 ] We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Dave Aldridge authored
commit 3c7f6221 upstream. When any of the functions contained in NGbzero.S and GENbzero.S vector through *bzero_from_clear_user, we may end up taking a fault when executing one of the store alternate address space instructions. If this happens, the exception handler does not restore the %asi register. This commit fixes the issue by introducing a new exception handler that ensures the %asi register is restored when a fault is handled. Orabug: 25577560 Signed-off-by:
Dave Aldridge <david.j.aldridge@oracle.com> Reviewed-by:
Rob Gardner <rob.gardner@oracle.com> Reviewed-by:
Babu Moger <babu.moger@oracle.com> Signed-off-by:
-
