- 19 May, 2024 1 commit
-
-
Arunpravin Paneer Selvam authored
Move the fallback and block incompatible checks above, so that we dont unnecessarily split the blocks and leaving the unmerged. This resolves the unnecessary warn on's thrown during force_merge call. v2:(Matthew) - Move the fallback and block incompatible checks above the contains check. Signed-off-by:Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Fixes: 96950929 ("drm/buddy: Implement tracking clear page feature") Link: https://patchwork.kernel.org/project/dri-devel/patch/20240517135015.17565-1-Arunpravin.PaneerSelvam@amd.com/Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240517143305.17894-1-Arunpravin.PaneerSelvam@amd.com
-
- 16 May, 2024 2 commits
-
-
Arunpravin Paneer Selvam authored
Allocate cleared blocks in the bias range when the DRM buddy's clear avail is zero. This will validate the bias range allocation in scenarios like system boot when no cleared blocks are available and exercise the fallback path too. The resulting blocks should always be dirty. v1:(Matthew) - move the size to the variable declaration section. - move the mm.clear_avail init to allocator init. Signed-off-by:
-
Arunpravin Paneer Selvam authored
Problem statement: During the system boot time, an application request for the bulk volume of cleared range bias memory when the clear_avail is zero, we dont fallback into normal allocation method as we had an unnecessary clear_avail check which prevents the fallback method leads to fb allocation failure following system goes into unresponsive state. Solution: Remove the unnecessary clear_avail check in the range bias allocation function. v2: add a kunit for this corner case (Daniel Vetter) Signed-off-by:
-
- 10 May, 2024 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-xe-next-fixes-2024-05-09-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Use ordered WQ for G2H handler. (Matthew Brost) - Use flexible-array rather than zero-sized (Lucas De Marchi) Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2024-05-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - panthor fixes. - Reverting Kconfig changes, and moving drm options to submenu. - Hide physical fb address in fb helper. - zynqmp bridge fix. - Revert broken ti-sn65dsi83 fix. Signed-off-by:
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
Updates for v6.10 Core: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings (no driver changes, using SM8350 as a fallback compat) GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support Signed-off-by:
-
- 09 May, 2024 2 commits
-
-
Lucas De Marchi authored
Zero-length arrays are deprecated and flexible arrays should be used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arraysReported-by:
kernel test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202405051824.AmjAI5Pg-lkp@intel.com/ Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240506141917.205714-1-lucas.demarchi@intel.comSigned-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit ee728423) Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com>
-
Matthew Brost authored
System work queues are shared, use a dedicated work queue for G2H processing to avoid G2H processing getting block behind system tasks. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: <stable@vger.kernel.org> Signed-off-by:
Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240506034758.3697397-1-matthew.brost@intel.com (cherry picked from commit 50aec966) Signed-off-by:
-
- 07 May, 2024 2 commits
-
-
Dmitry Baryshkov authored
We don't need to run the validation of the XML files if we are just compiling the kernel. Skip the validation unless the user enables corresponding Kconfig option. This removes a warning from gen_header.py about lxml being not installed. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20240409120108.2303d0bd@canb.auug.org.au/Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/592558/Signed-off-by:
Rob Clark <robdclark@chromium.org>
-
Rob Clark authored
These tables were made non-const in commit 3cba4a2c ("drm/msm/a6xx: Update ROQ size in coredump") in order to avoid powering up the GPU when reading back a devcoredump. Instead let's just stash the count that is potentially read from hw in struct a6xx_gpu_state_obj, and make the tables const again. Signed-off-by:
-
- 05 May, 2024 2 commits
-
-
Connor Abbott authored
Add an a750 case to the various places where we choose a list of registers. Patchwork: https://patchwork.freedesktop.org/patch/592519/Signed-off-by:
Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/592519Signed-off-by:
-
Connor Abbott authored
Use the kgsl-style list of indices, because this is about to change for a750 and we want to reuse the downstream header directly. Patchwork: https://patchwork.freedesktop.org/patch/592520/Signed-off-by:
-
- 04 May, 2024 8 commits
-
-
Connor Abbott authored
Update to Mesa commit e82d70d472cc ("freedreno/a7xx: Add A7XX_HLSQ_DP_STR location from kgsl"). Signed-off-by: -
Connor Abbott authored
Add A7XX prefixes necessary because we use the same code for dumping a6xx and a7xx, fix register name prefixes for upstream, and use the upstream header. Patchwork: https://patchwork.freedesktop.org/patch/592517/Signed-off-by:
-
Connor Abbott authored
Import from kgsl commit 809ee24fe560. Signed-off-by:
-
Konrad Dybcio authored
Add myself as a reviewer for Adreno driver changes. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/590705/Signed-off-by:
-
Konrad Dybcio authored
The msm driver is.. gigantic and covers display hardware (incl. things concerning (e)DP, DSI, HDMI), as well as the entire lineup of Adreno GPUs (with hw bringup, memory mappings, userspace interaction etc.). Because of that, people listed as M:/R: receive patches concerning drivers for any part of the display block OR the GPU. Separate the latter, as it's both a functionally separate block and is of interest to different folks. Signed-off-by:
-
Konrad Dybcio authored
Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer dereference on: msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); as gpu->pdev is only assigned in: a6xx_gpu_init() |_ adreno_gpu_init |_ msm_gpu_init() Instead of relying on handwavy null checks down the cleanup chain, explicitly de-allocate the LLC data and free a6xx_gpu instead. Fixes: 76efc245 ("drm/msm/gpu: Fix crash during system suspend after unbind") Signed-off-by: -
Zan Dobersek authored
a7xx_submit() should use the a7xx variant of the RBBM_PERFCTR_CP register for retrieving the CP cycles value before and after the submitted command stream execution. Signed-off-by:
Zan Dobersek <zdobersek@igalia.com> Fixes: af66706a ("drm/msm/a6xx: Add skeleton A7xx support") Patchwork: https://patchwork.freedesktop.org/patch/588445/Signed-off-by:
-
Zan Dobersek authored
In addition to the CP_PERFCTR_CP_SEL register range, allow writes to the CP_BV_PERFCTR_CP_SEL registers in the 0x8e0-0x8e6 range for profiling purposes of tools like fdperf and perfetto. Signed-off-by:
-
- 03 May, 2024 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-xe-next-fixes-2024-05-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Fix for a backmerge going slightly wrong. - An UAF fix - Avoid a WA error on LNL. Signed-off-by:
-
- 02 May, 2024 19 commits
-
-
Sean Anderson authored
We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- Fixes: eb2d64bf ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge") Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Luca Ceresoli authored
This reverts commit 8a91b29f. The regulator_disable() added by the original commit solves one kind of regulator imbalance but adds another one as it allows the regulator to be disabled one more time than it is enabled in the following scenario: 1. Start video pipeline -> sn65dsi83_atomic_pre_enable -> regulator_enable 2. PLL lock fails -> regulator_disable 3. Stop video pipeline -> sn65dsi83_atomic_disable -> regulator_disable The reason is clear from the code flow, which looks like this (after removing unrelated code): static void sn65dsi83_atomic_pre_enable() { regulator_enable(ctx->vcc); if (PLL failed locking) { regulator_disable(ctx->vcc); <---- added by patch being reverted return; } } static void sn65dsi83_atomic_disable() { regulator_disable(ctx->vcc); } The use case for introducing the additional regulator_disable() was removing the module for debugging (see link below for the discussion). If the module is removed after a .atomic_pre_enable, i.e. with an active pipeline from the DRM point of view, .atomic_disable is not called and thus the regulator would not be disabled. According to the discussion however there is no actual use case for removing the module with an active pipeline, except for debugging/development. On the other hand, the occurrence of a PLL lock failure is possible due to any physical reason (e.g. a temporary hardware failure for electrical reasons) so handling it gracefully should be supported. As there is no way for .atomic[_pre]_enable to report an error to the core, the only clean way to support it is calling regulator_disabled() only in .atomic_disable, unconditionally, as it was before. Link: https://lore.kernel.org/all/15244220.uLZWGnKmhe@steina-w/ Fixes: 8a91b29f ("drm/bridge: ti-sn65dsi83: Fix enable error path") Reviewed-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240426122259.46808-1-luca.ceresoli@bootlin.com (cherry picked from commit 2940ee03) Signed-off-by:
-
Jocelyn Falempe authored
plane->state and plane->state->fb can be NULL, so add a check before dereferencing them. Found by testing with the imx driver. Fixes: 879b3b65 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic") Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240426121121.241366-1-jfalempe@redhat.com (cherry picked from commit 986c12d8) Signed-off-by:
-
Thomas Zimmermann authored
Framebuffer memory is allocated via vzalloc() from non-contiguous physical pages. The physical framebuffer start address is therefore meaningless. Do not set it. The value is not used within the kernel and only exported to userspace on dedicated ARM configs. No functional change is expected. v2: - refer to vzalloc() in commit message (Javier) Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Zack Rusin <zack.rusin@broadcom.com> Reviewed-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Tested-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de (cherry picked from commit 73ef0aec) Signed-off-by:
-
Boris Brezillon authored
In the post_reset function, if the fast reset didn't succeed, we are not clearing the fast_reset flag, which prevents firmware sections from being reloaded. While at it, use panthor_fw_stop() instead of manually writing DISABLE to the MCU_CONTROL register. Fixes: 2718d918 ("drm/panthor: Add the FW logical block") Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com
-
Boris Brezillon authored
When we check for state values returned by the FW, we only cover part of the 0:7 range. Make sure we catch FW inconsistencies by adding a default to the switch statement, and flagging the group state as unknown in that case. When an unknown state is detected, we trigger a reset, and consider the group as unusable after that point, to prevent the potential corruption from creeping in other places if we continue executing stuff on this context. v2: - Add Steve's R-b - Fix commit message Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/3b7fd2f2-679e-440c-81cd-42fc2573b515@moroto.mountain/T/#uSuggested-by:
-
Masahiro Yamada authored
When you create a submenu using the 'menu' syntax, there is no ambiguity about its end because the code between 'menu' and 'endmenu' becomes the submenu. In contrast, 'menuconfig' does not have the corresponding end marker. Instead, the end of the submenu is inferred from symbol dependencies. This is detailed in Documentation/kbuild/kconfig-language.rst, starting line 348. It outlines two methods to place the code under the submenu: (1) Open an if-block immediately after 'menuconfig', enclosing the submenu content within it (2) Add 'depends on' to every symbol intended for the submenu Many subsystems opt for (1) because it reliably maintains the submenu structure. The DRM subsystem adopts (2). The submenu ends when the sequence of 'depends on DRM' breaks. It can be confirmed by running a GUI frontend such as 'make menuconfig' and visiting the DRM menu: < > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---- If you toggle this, you will notice most of the DRM-related options appear below it, not in the submenu. I highly recommend the approach (1). Obviously, (2) is not reliable, as the submenu breaks whenever someone forgets to add 'depends on DRM'. This commit encloses the entire DRM configuration with 'if DRM' and 'endif', except for DRM_PANEL_ORIENTATION_QUIRKS. Note: Now, 'depends on DRM' properties inside the if-block are all redundant. I leave it as follow-up cleanups. Signed-off-by:Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.orgSigned-off-by:
-
Geert Uytterhoeven authored
This reverts commit d674858f, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Geert Uytterhoeven authored
This reverts commit c0e0f139, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit e075e496, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 4d15125d, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 0323287d, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 3166e7e6, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit f6d2dc03, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit d1ef8fc1, as the commit it fixes will be reverted, too. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 0209df3b, as the commit it fixes (which is BTW not the commit in the Fixes: tag!) will be reverted, too. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 7fa678cc, as the commit it fixes will be reverted, too. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit a57e191e, as the commits it fixes will be reverted, too. Signed-off-by:
-
Boris Brezillon authored
We can use upd_ctx.timedout_mask directly, and the faulty_slots update in the flush_caches_failed situation is never used. Suggested-by:
-
