- 25 Jun, 2023 7 commits
-
-
Dan Williams authored
In preparation for support for HDM-D and HDM-DB configuration (device-memory, and device-memory with back-invalidate). Rename the current type designators to use HOSTONLYMEM and DEVMEM as a suffix. HDM-DB can be supported by devices that are not accelerators, so DEVMEM is a more generic term for that case. Fixup one location where this type value was open coded. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679261369.3436160.7042443847605280593.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
In support of the Linux CXL core scaling for a wider set of CXL devices, allow for the creation of memdevs with some memory device capabilities disabled. Specifically, allow for CXL devices outside of those claiming to be compliant with the generic CXL memory device class code, like vendor specific Type-2/3 devices that host CXL.mem. This implies, allow for the creation of memdevs that only support component-registers, not necessarily memory-device-registers (like mailbox registers). A memdev derived from a CXL endpoint that does not support generic class code expectations is tagged "CXL_DEVTYPE_DEVMEM", while a memdev derived from a class-code compliant endpoint is tagged "CXL_DEVTYPE_CLASSMEM". The primary assumption of a CXL_DEVTYPE_DEVMEM memdev is that it optionally may not host a mailbox. Disable the command passthrough ioctl for memdevs that are not CXL_DEVTYPE_CLASSMEM, and return empty strings from memdev attributes associated with data retrieved via the class-device-standard IDENTIFY command. Note that empty strings were chosen over attribute visibility to maintain compatibility with shipping versions of cxl-cli that expect those attributes to always be present. Once cxl-cli has dropped that requirement this workaround can be deprecated. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679260782.3436160.7587293613945445365.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
'struct cxl_dev_state' makes too many assumptions about the capabilities of a CXL device. In particular it assumes a CXL device has a mailbox and all of the infrastructure and state that comes along with that. In preparation for supporting accelerator / Type-2 devices that may not have a mailbox and in general maintain a minimal core context structure, make mailbox functionality a super-set of 'struct cxl_dev_state' with 'struct cxl_memdev_state'. With this reorganization it allows for CXL devices that support HDM decoder mapping, but not other general-expander / Type-3 capabilities, to only enable that subset without the rest of the mailbox infrastructure coming along for the ride. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679260240.3436160.15520641540463704524.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
commit 14d78874 ("cxl/mem: Consolidate CXL DVSEC Range enumeration in the core") ...removed @info from 'struct cxl_dev_state', but neglected to remove the corresponding kernel-doc entry. Complete the removal. Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Closes: http://lore.kernel.org/r/20230606121054.000069e1@Huawei.comReviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679259703.3436160.12583306507362357946.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
After Jonathan noticed [1] that 'struct cxl_dev_state' had a kernel-doc entry without a corresponding struct attribute I ran the kernel-doc script to see what else might be broken. Fix these warnings: drivers/cxl/cxlmem.h:199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Event Interrupt Policy drivers/cxl/cxlmem.h:224: warning: Function parameter or member 'buf' not described in 'cxl_event_state' drivers/cxl/cxlmem.h:224: warning: Function parameter or member 'log_lock' not described in 'cxl_event_state' Note that scripts/kernel-doc only finds missing kernel-doc entries. It does not warn on too many kernel-doc entries, i.e. it did not catch the fact that @info refers to a not present member. Link: http://lore.kernel.org/r/20230606121054.000069e1@Huawei.com [1] Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679259170.3436160.3686460404739136336.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
In preparation for plumbing a 'struct cxl_memdev_state' as a superset of a 'struct cxl_dev_state' cleanup the usage of @cxlds in the unit test infrastructure. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679258640.3436160.7641308222525246728.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The @map parameter to cxl_probe_X_registers() is filled in with the mapping parameters of the register block. The @map parameter to cxl_map_X_registers() only reads that information to perform the mapping. Mark @map const for cxl_map_X_registers() to clarify that it is only an input to those helpers. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168679258103.3436160.4941603739448763855.stgit@dwillia2-xfh.jf.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
- 04 Jun, 2023 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: - Fix open firmware quirks validation so that they don't get applied wrongly * tag 'irq_urgent_for_v6.4_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Correctly validate OF quirk descriptors
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Some driver fixes: - a regression fix for the verisilicon driver - uvcvideo: don't expose unsupported video formats to userspace - camss-video: don't zero subdev format after init - mediatek: some fixes for 4K decoder formats - fix a Sphinx build warning (missing doc for client_caps) - some fixes for imx and atomisp staging drivers And two CEC core fixes: - don't set last_initiator if TX in progress - disable adapter in cec_devnode_unregister" * tag 'media/v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: uvcvideo: Don't expose unsupported formats to userspace media: v4l2-subdev: Fix missing kerneldoc for client_caps media: staging: media: imx: initialize hs_settle to avoid warning media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad() media: staging: media: atomisp: init high & low vars media: cec: core: don't set last_initiator if tx in progress media: cec: core: disable adapter in cec_devnode_unregister media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats media: camss: camss-video: Don't zero subdev format again after initialization media: verisilicon: Additional fix for the crash when opening the driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that resolve a number of reported issues. Included in here are: - iio driver fixes - fpga driver fixes - test_firmware bugfixes - fastrpc driver tiny bugfixes - MAINTAINERS file updates for some subsystems All of these have been in linux-next this past week with no reported issues" * tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits) test_firmware: fix the memory leak of the allocated firmware buffer test_firmware: fix a memory leak with reqs buffer test_firmware: prevent race conditions by a correct implementation of locking firmware_loader: Fix a NULL vs IS_ERR() check MAINTAINERS: Vaibhav Gupta is the new ipack maintainer dt-bindings: fpga: replace Ivan Bornyakov maintainership MAINTAINERS: update Microchip MPF FPGA reviewers misc: fastrpc: reject new invocations during device removal misc: fastrpc: return -EPIPE to invocations on device removal misc: fastrpc: Reassign memory ownership only for remote heap misc: fastrpc: Pass proper scm arguments for secure map request iio: imu: inv_icm42600: fix timestamp reset iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value iio: dac: mcp4725: Fix i2c_master_send() return value handling iio: accel: kx022a fix irq getting iio: bu27034: Ensure reset is written iio: dac: build ad5758 driver when AD5758 is selected iio: addac: ad74413: fix resistance input processing iio: light: vcnl4035: fixed chip ID check ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are two small driver core cacheinfo fixes for 6.4-rc5 that resolve a number of reported issues with that file. These changes have been in linux-next this past week with no reported problems" * tag 'driver-core-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: base: cacheinfo: Update cpu_map_populated during CPU Hotplug drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty/serial driver fixes for 6.4-rc5 that have all been in linux-next this past week with no reported problems. Included in here are: - 8250_tegra driver bugfix - fsl uart driver bugfixes - Kconfig fix for dependancy issue - dt-bindings fix for the 8250_omap driver" * tag 'tty-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: dt-bindings: serial: 8250_omap: add rs485-rts-active-high serial: cpm_uart: Fix a COMPILE_TEST dependency soc: fsl: cpm1: Fix TSA and QMC dependencies in case of COMPILE_TEST tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK serial: 8250_tegra: Fix an error handling path in tegra_uart_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB driver and core fixes for 6.4-rc5. Most of these are tiny driver fixes, including: - udc driver bugfix - f_fs gadget driver bugfix - cdns3 driver bugfix - typec bugfixes But the "big" thing in here is a fix yet-again for how the USB buffers are handled from userspace when dealing with DMA issues. The changes were discussed a lot, and tested a lot, on the list, and acked by the relevant mm maintainers and have been in linux-next all this past week with no reported problems" * tag 'usb-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tps6598x: Fix broken polling mode after system suspend/resume mm: page_table_check: Ensure user pages are not slab pages mm: page_table_check: Make it dependent on EXCLUSIVE_SYSTEM_RAM usb: usbfs: Use consistent mmap functions usb: usbfs: Enforce page requirements for mmap dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type usb: gadget: udc: fix NULL dereference in remove() usb: gadget: f_fs: Add unbind event before functionfs_unbind usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Address some fallout of the locking rework, this time affecting the way the vgic is configured - Fix an issue where the page table walker frees a subtree and then proceeds with walking what it has just freed... - Check that a given PA donated to the guest is actually memory (only affecting pKVM) - Correctly handle MTE CMOs by Set/Way - Fix the reported address of a watchpoint forwarded to userspace - Fix the freeing of the root of stage-2 page tables - Stop creating spurious PMU events to perform detection of the default PMU and use the existing PMU list instead x86: - Fix a memslot lookup bug in the NX recovery thread that could theoretically let userspace bypass the NX hugepage mitigation - Fix a s/BLOCKING/PENDING bug in SVM's vNMI support - Account exit stats for fastpath VM-Exits that never leave the super tight run-loop - Fix an out-of-bounds bug in the optimized APIC map code, and add a regression test for the race" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Add test for race in kvm_recalculate_apic_map() KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds KVM: x86: Account fastpath-only VM-Exits in vCPU stats KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker KVM: arm64: Document default vPMU behavior on heterogeneous systems KVM: arm64: Iterate arm_pmus list to probe for default PMU KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed() KVM: arm64: Populate fault info for watchpoint KVM: arm64: Reload PTE after invoking walker callback on preorder traversal KVM: arm64: Handle trap of tagged Set/Way CMOs arm64: Add missing Set/Way CMO encodings KVM: arm64: Prevent unconditional donation of unmapped regions from the host KVM: arm64: vgic: Fix a comment KVM: arm64: vgic: Fix locking comment KVM: arm64: vgic: Wrap vgic_its_create() with config_lock KVM: arm64: vgic: Fix a circular locking issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix link errors in new aes-gcm-p10 code when built-in with other drivers - Limit number of TCEs passed to H_STUFF_TCE hcall as per spec - Use KSYM_NAME_LEN in xmon array size to avoid possible OOB write Thanks to Gaurav Batra and Maninder Singh Vishal Chourasia. * tag 'powerpc-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xmon: Use KSYM_NAME_LEN in array size powerpc/iommu: Limit number of TCEs to 512 for H_STUFF_TCE hcall powerpc/crypto: Fix aes-gcm-p10 link errors
-
- 03 Jun, 2023 10 commits
-
-
https://github.com/kvm-x86/linuxPaolo Bonzini authored
KVM x86 fixes for 6.4 - Fix a memslot lookup bug in the NX recovery thread that could theoretically let userspace bypass the NX hugepage mitigation - Fix a s/BLOCKING/PENDING bug in SVM's vNMI support - Account exit stats for fastpath VM-Exits that never leave the super tight run-loop - Fix an out-of-bounds bug in the optimized APIC map code, and add a regression test for the race.
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.4, take #3 - Fix the reported address of a watchpoint forwarded to userspace - Fix the freeing of the root of stage-2 page tables - Stop creating spurious PMU events to perform detection of the default PMU and use the existing PMU list instead.
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.4, take #2 - Address some fallout of the locking rework, this time affecting the way the vgic is configured - Fix an issue where the page table walker frees a subtree and then proceeds with walking what it has just freed... - Check that a given PA donated to the gues is actually memory (only affecting pKVM) - Correctly handle MTE CMOs by Set/Way
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Five fixes, all in drivers. The most extensive is the target change to fix the hang in the login code, which involves changing timers from per login to per connection" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: stex: Fix gcc 13 warnings scsi: qla2xxx: Fix NULL pointer dereference in target mode scsi: target: iscsi: Prevent login threads from racing between each other scsi: target: iscsi: Remove unused transport_timer scsi: target: iscsi: Fix hang in the iSCSI login code
-
git://git.kernel.org/pub/scm/linux/kernel/git/johan/linuxLinus Torvalds authored
Pull LED fix from Johan Hovold: "Here's a fix for a regression in 6.4-rc1 which broke the backlight on machines such as the Lenovo ThinkPad X13s" Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/lkml/20230602091928.GR449117@google.com/ * tag 'leds-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/linux: leds: qcom-lpg: Fix PWM period limits
-
Bjorn Andersson authored
The introduction of high resolution PWM support changed the order of the operations in the calculation of min and max period. The result in both divisions is in most cases a truncation to 0, which limits the period to the range of [0, 0]. Both numerators (and denominators) are within 64 bits, so the whole expression can be put directly into the div64_u64, instead of doing it partially. Fixes: b00d2ed3 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM") Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by: Lee Jones <lee@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20230515162604.649203-1-quic_bjorande@quicinc.comSigned-off-by: Johan Hovold <johan@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull probes fixes from Masami Hiramatsu: - Return NULL if the trace_probe list on trace_probe_event is empty - selftests/ftrace: Choose testing symbol name for filtering feature from sample data instead of fixed symbol * tag 'probes-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: selftests/ftrace: Choose target function for filter test from samples tracing/probe: trace_probe_primary_from_call(): checked list_first_entry
-
Masami Hiramatsu (Google) authored
Since the event-filter-function.tc expects the 'exit_mmap()' directly calls 'kmem_cache_free()', this is vulnerable to code modifications. Choose the target function for the filter test from the sample event data so that it can keep test running correctly even if the caller function name will be changed. Link: https://lore.kernel.org/linux-trace-kernel/167919441260.1922645.18355804179347364057.stgit@mhiramat.roam.corp.google.com/ Link: https://lore.kernel.org/all/CA+G9fYtF-XEKi9YNGgR=Kf==7iRb2FrmEC7qtwAeQbfyah-UhA@mail.gmail.com/Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 7f09d639 ("tracing/selftests: Add test for event filtering on function name") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-
Michal Luczaj authored
Keep switching between LAPIC_MODE_X2APIC and LAPIC_MODE_DISABLED during APIC map construction to hunt for TOCTOU bugs in KVM. KVM's optimized map recalc makes multiple passes over the list of vCPUs, and the calculations ignore vCPU's whose APIC is hardware-disabled, i.e. there's a window where toggling LAPIC_MODE_DISABLED is quite interesting. Signed-off-by: Michal Luczaj <mhal@rbox.co> Co-developed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20230602233250.1014316-4-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>
-
Sean Christopherson authored
Bail from kvm_recalculate_phys_map() and disable the optimized map if the target vCPU's x2APIC ID is out-of-bounds, i.e. if the vCPU was added and/or enabled its local APIC after the map was allocated. This fixes an out-of-bounds access bug in the !x2apic_format path where KVM would write beyond the end of phys_map. Check the x2APIC ID regardless of whether or not x2APIC is enabled, as KVM's hardcodes x2APIC ID to be the vCPU ID, i.e. it can't change, and the map allocation in kvm_recalculate_apic_map() doesn't check for x2APIC being enabled, i.e. the check won't get false postivies. Note, this also affects the x2apic_format path, which previously just ignored the "x2apic_id > new->max_apic_id" case. That too is arguably a bug fix, as ignoring the vCPU meant that KVM would not send interrupts to the vCPU until the next map recalculation. In practice, that "bug" is likely benign as a newly present vCPU/APIC would immediately trigger a recalc. But, there's no functional downside to disabling the map, and a future patch will gracefully handle the -E2BIG case by retrying instead of simply disabling the optimized map. Opportunistically add a sanity check on the xAPIC ID size, along with a comment explaining why the xAPIC ID is guaranteed to be "good". Reported-by: Michal Luczaj <mhal@rbox.co> Fixes: 5b84b029 ("KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230602233250.1014316-2-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>
-
- 02 Jun, 2023 14 commits
-
-
Sean Christopherson authored
Increment vcpu->stat.exits when handling a fastpath VM-Exit without going through any part of the "slow" path. Not bumping the exits stat can result in wildly misleading exit counts, e.g. if the primary reason the guest is exiting is to program the TSC deadline timer. Fixes: 404d5d7b ("KVM: X86: Introduce more exit_fastpath_completion enum values") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230602011920.787844-2-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>
-
Maciej S. Szmigiero authored
While testing Hyper-V enabled Windows Server 2019 guests on Zen4 hardware I noticed that with vCPU count large enough (> 16) they sometimes froze at boot. With vCPU count of 64 they never booted successfully - suggesting some kind of a race condition. Since adding "vnmi=0" module parameter made these guests boot successfully it was clear that the problem is most likely (v)NMI-related. Running kvm-unit-tests quickly showed failing NMI-related tests cases, like "multiple nmi" and "pending nmi" from apic-split, x2apic and xapic tests and the NMI parts of eventinj test. The issue was that once one NMI was being serviced no other NMI was allowed to be set pending (NMI limit = 0), which was traced to svm_is_vnmi_pending() wrongly testing for the "NMI blocked" flag rather than for the "NMI pending" flag. Fix this by testing for the right flag in svm_is_vnmi_pending(). Once this is done, the NMI-related kvm-unit-tests pass successfully and the Windows guest no longer freezes at boot. Fixes: fa4c027a ("KVM: x86: Add support for SVM's Virtual NMI") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/be4ca192eb0c1e69a210db3009ca984e6a54ae69.1684495380.git.maciej.szmigiero@oracle.comSigned-off-by: Sean Christopherson <seanjc@google.com>
-
Sean Christopherson authored
Factor in the address space (non-SMM vs. SMM) of the target shadow page when recovering potential NX huge pages, otherwise KVM will retrieve the wrong memslot when zapping shadow pages that were created for SMM. The bug most visibly manifests as a WARN on the memslot being non-NULL, but the worst case scenario is that KVM could unaccount the shadow page without ensuring KVM won't install a huge page, i.e. if the non-SMM slot is being dirty logged, but the SMM slot is not. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 3911 at arch/x86/kvm/mmu/mmu.c:7015 kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm] CPU: 1 PID: 3911 Comm: kvm-nx-lpage-re RIP: 0010:kvm_nx_huge_page_recovery_worker+0x38c/0x3d0 [kvm] RSP: 0018:ffff99b284f0be68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99b284edd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9271397024e0 R08: 0000000000000000 R09: ffff927139702450 R10: 0000000000000000 R11: 0000000000000001 R12: ffff99b284f0be98 R13: 0000000000000000 R14: ffff9270991fcd80 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff927f9f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0aacad3ae0 CR3: 000000088fc2c005 CR4: 00000000003726e0 Call Trace: <TASK> __pfx_kvm_nx_huge_page_recovery_worker+0x10/0x10 [kvm] kvm_vm_worker_thread+0x106/0x1c0 [kvm] kthread+0xd9/0x100 ret_from_fork+0x2c/0x50 </TASK> ---[ end trace 0000000000000000 ]--- This bug was exposed by commit edbdb43f ("KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated"), which allowed KVM to retain SMM TDP MMU roots effectively indefinitely. Before commit edbdb43f, KVM would zap all SMM TDP MMU roots and thus all SMM TDP MMU shadow pages once all vCPUs exited SMM, which made the window where this bug (recovering an SMM NX huge page) could be encountered quite tiny. To hit the bug, the NX recovery thread would have to run while at least one vCPU was in SMM. Most VMs typically only use SMM during boot, and so the problematic shadow pages were gone by the time the NX recovery thread ran. Now that KVM preserves TDP MMU roots until they are explicitly invalidated (e.g. by a memslot deletion), the window to trigger the bug is effectively never closed because most VMMs don't delete memslots after boot (except for a handful of special scenarios). Fixes: eb298605 ("KVM: x86/mmu: Do not recover dirty-tracked NX Huge Pages") Reported-by: Fabio Coatti <fabio.coatti@gmail.com> Closes: https://lore.kernel.org/all/CADpTngX9LESCdHVu_2mQkNGena_Ng2CphWNwsRGSMxzDsTjU2A@mail.gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230602010137.784664-1-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>
-
Lino Sanfilippo authored
With commit 858e8b79 ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts") bit accessor functions are used to access flags in tpm_tis_data->flags. However these functions expect bit numbers, while the flags are defined as bit masks in enum tpm_tis_flag. Fix this inconsistency by using numbers instead of masks also for the flags in the enum. Reported-by: Pavel Machek <pavel@denx.de> Fixes: 858e8b79 ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Cc: stable@vger.kernel.org Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "Fix an ext4 regression which landed during the 6.4 merge window" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fix from David Sterba: "One regression fix. The rewrite of scrub code in 6.4 broke device replace in zoned mode, some of the writes could happen out of order so this had to be adjusted for all cases" * tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: fix dev-replace after the scrub rework
-
Ojaswin Mujoo authored
This reverts commit 32c08693. The reverted commit was intended to remove a dead check however it was observed that this check was actually being used to exit early instead of looping sbi->s_mb_max_to_scan times when we are able to find a free extent bigger than the goal extent. Due to this, a my performance tests (fsmark, parallel file writes in a highly fragmented FS) were seeing a 2x-3x regression. Example, the default value of the following variables is: sbi->s_mb_max_to_scan = 200 sbi->s_mb_min_to_scan = 10 In ext4_mb_check_limits() if we find an extent smaller than goal, then we return early and try again. This loop will go on until we have processed sbi->s_mb_max_to_scan(=200) number of free extents at which point we exit and just use whatever we have even if it is smaller than goal extent. Now, the regression comes when we find an extent bigger than goal. Earlier, in this case we would loop only sbi->s_mb_min_to_scan(=10) times and then just use the bigger extent. However with commit 32c08693 that check was removed and hence we would loop sbi->s_mb_max_to_scan(=200) times even though we have a big enough free extent to satisfy the request. The only time we would exit early would be when the free extent is *exactly* the size of our goal, which is pretty uncommon occurrence and so we would almost always end up looping 200 times. Hence, revert the commit by adding the check back to fix the regression. Also add a comment to outline this policy. Fixes: 32c08693 ("ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits") Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com> Link: https://lore.kernel.org/r/ddcae9658e46880dfec2fb0aa61d01fb3353d202.1685449706.git.ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Laurent Pinchart authored
When the uvcvideo driver encounters a format descriptor with an unknown format GUID, it creates a corresponding struct uvc_format instance with the fcc field set to 0. Since commit 50459f10 ("media: uvcvideo: Remove format descriptions"), the driver relies on the V4L2 core to provide the format description string, which the V4L2 core can't do without a valid 4CC. This triggers a WARN_ON. As a format with a zero 4CC can't be selected, it is unusable for applications. Ignore the format completely without creating a uvc_format instance, which fixes the warning. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217252 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2180107 Fixes: 50459f10 ("media: uvcvideo: Remove format descriptions") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A build warning fix for BUILTIN_DTB=y - Hibernation support is hidden behind NONPORTABLE, as it depends on some undocumented early boot behavior and breaks on most platforms - A fix for relocatable kernels on systems with early boot errata - A fix to properly handle perf callchains for kernel tracepoints - A pair of fixes for NAPOT to avoid inconsistencies between PTEs and handle hardware that sets arbitrary A/D bits * tag 'riscv-for-linus-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Implement missing huge_ptep_get riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT riscv: perf: Fix callchain parse error with kernel tracepoint events riscv: Fix relocatable kernels with early alternatives using -fno-pie RISC-V: mark hibernation as nonportable riscv: Fix unused variable warning when BUILTIN_DTB is set
-
Tomi Valkeinen authored
Add missing kernel doc for the new 'client_caps' field in struct v4l2_subdev_fh. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: f57fa295 ("media: v4l2-subdev: Add new ioctl for client capabilities") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans Verkuil authored
Initialize hs_settle to 0 to avoid this compiler warning: imx8mq-mipi-csi2.c: In function 'imx8mq_mipi_csi_start_stream.part.0': imx8mq-mipi-csi2.c:91:55: warning: 'hs_settle' may be used uninitialized [-Wmaybe-uninitialized] 91 | #define GPR_CSI2_1_S_PRG_RXHS_SETTLE(x) (((x) & 0x3f) << 2) | ^~ imx8mq-mipi-csi2.c:357:13: note: 'hs_settle' was declared here 357 | u32 hs_settle; | ^~~~~~~~~ It's a false positive, but it is too complicated for the compiler to detect that. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Vaishnav Achath authored
While updating v4l2_create_fwnode_links_to_pad() to accept non-subdev sinks, the check is_media_entity_v4l2_subdev() was not removed which prevented the function from being used with non-subdev sinks, Drop the unnecessary check. Fixes: bd5a03bc ("media: Accept non-subdev sinks in v4l2_create_fwnode_links_to_pad()") Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - Two minor bug fixes * tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: fix double fget() bug in __write_ports_addfd() nfsd: make a copy of struct iattr before calling notify_change
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just an NVMe pull request with (mostly) KATO fixes, a regression fix for zoned device revalidation, and a fix for an md raid5 regression" * tag 'block-6.4-2023-06-02' of git://git.kernel.dk/linux: nvme: fix the name of Zone Append for verbose logging nvme: improve handling of long keep alives nvme: check IO start time when deciding to defer KA nvme: double KA polling frequency to avoid KATO with TBKAS on nvme: fix miss command type check block: fix revalidate performance regression md/raid5: fix miscalculation of 'end_sector' in raid5_read_one_chunk()
-