In power save mode, the recording voice from headset mic will 2s more delay.
Add this patch will solve this issue.

[ minor coding style fix by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Scarlett device series from Focusrite Novation seem requiring the
sample rate validations as we've done for MOTU devices; otherwise the
driver probes invalid audioformat entries that contain the sample
rates that actually don't work, and this may result in an incomplete
setup as reported recently.

This patch adds the needed quirk flag for enabling the sample rate
validation for Focusrite Novation devices.

Fixes: fe773b87 ("ALSA: usb-audio: workaround for iface reset issue")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Link: https://lore.kernel.org/r/20211004074050.28241-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This
fixes the issue of the devices internal Speaker not working.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The string "Clevo X170" is not enough to unambiguously identify the correct
device.

Fixing it so another Clevo barebone name starting with "X170" can be added
without causing confusion.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The headphone mic is not working on Dell Latitude laptops with ALC3254.
The codec vendor id is 0x10ec0295 and share the same pincfg as defined
in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will
be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is
using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
need to be applied instead.

Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before
a generic fixup comes out.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

John Keeping reported and posted a patch for a potential UAF in
rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be
called after the associated rawmidi object got already freed.
After a deeper look, it turned out that the bug is rather the
incorrect private_free call order for a snd_seq_device.  The
snd_seq_device private_free gets called at the release callback of the
sequencer device object, while this was rather expected to be executed
at the snd_device call chains that runs at the beginning of the whole
card-free procedure.  It's been broken since the rewrite of
sequencer-device binding (although it hasn't surfaced because the
sequencer device release happens usually right along with the card
device release).

This patch corrects the private_free call to be done in the right
place, at snd_seq_device_dev_free().

Fixes: 7c37ae5c ("ALSA: seq: Rewrite sequencer device binding with standard bus")
Reported-and-tested-by: John Keeping <john@metanate.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289
audio just like its sibling product XPS 9510, so it requires the same
quirk to enable woofer output. Tested on my Dell Precision 5560.
Signed-off-by: John Liu <johnliu55tw@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The check of the returned error code is missing in
scarlett2_update_monitor_other().  Let's fix it.

Fixes: d5bda7e0 ("ALSA: usb-audio: scarlett2: Add support for the talkback feature")
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/202109131831.9IodEzRx-lkp@intel.com
Link: https://lore.kernel.org/r/20210929073540.9611-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The hrtimer callback pcsp_do_timer() prepares rearming of the timer with
hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to
forward the expiry time of the hrtimer by a multiple of the period argument
so that the expiry time greater than the time provided in the 'now'
argument.

pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry
time as 'now' argument. That's providing a periodic timer expiry, but is
not really robust when the timer callback is delayed so that the resulting
new expiry time is already in the past which causes the callback to be
invoked immediately again. If the timer is delayed then the back to back
invocation is not really making it better than skipping the missed
periods. Sound is distorted in any case.

Use hrtimer_forward_now() which ensures that the next expiry is in the
future. This prevents hogging the CPU in the timer expiry code and allows
later on to remove hrtimer_forward() from the public interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The new framing mode causes the user space regression, because
the alsa-lib code does not initialize the reserved space in
the params structure when the device is opened.

This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we
do for the PCM interface for the protocol acknowledgment.

Cc: David Henningsson <coding@diwic.se>
Cc: <stable@vger.kernel.org>
Fixes: 08fdced6 ("ALSA: rawmidi: Add framing mode")
BugLink: https://github.com/alsa-project/alsa-lib/issues/178Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data
channels includes message bytes from device. The total size of message
is 48 bits per data block.

The 'data_block_message' tracepoints event produced by ALSA firewire-motu
driver exposes the sequence of messages to userspace in 64 bit storage,
however lower 32 bits are actually available since current implementation
truncates 16 bits in upper of the message as a result of bit shift
operation within 32 bit storage.

This commit fixes the bug by perform the bit shift in 64 bit storage.

Fixes: c6b0b9e6 ("ALSA: firewire-motu: add tracepoints for messages for unique protocol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.15-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.15

A crop of mostly device specific fixes that have been applied since
the merge window, nothing particularly standout here.

Do not print error message from snd_sof_trace_notify_for_error() when
possible sleeping trace work is woken up to flush the remaining debug
information.

This action by itself is not an error, it is just an action we take when
an error occurs to make sure that all information have been fed to the
userspace (if we have trace in use).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210917085108.25532-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

S24_LE params fixup is only required for DPTX.
Remove fixup ops assignment for HDMITX.

Fixes: 40d605df ("ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210917082805.30898-1-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

In case the firmware is missing we will have the following in the kernel
log:

1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2
2 | error: request firmware intel/sof/sof-tgl-h.ri failed err: -2
3 | you may need to download the firmware from https://github.com/thesofproject/sof-bin/
4 | error: failed to load DSP firmware -2
5 | error: sof_probe_work failed err: -2

The first line is the standard, request_firmware() warning.
The second and third line is printed in snd_sof_load_firmware_raw()
Note that the first and second line is mostly identical.

With this patch the log will be changed to:
1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2
2 | error: sof firmware file is missing, you might need to
3 |        download it from https://github.com/thesofproject/sof-bin/
4 | error: failed to load DSP firmware -2
5 | error: sof_probe_work failed err: -2
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210916085342.29993-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Invoke release_firmware() when the firmware fails to boot in
sof_probe_continue().

The request_firmware() framework must be informed of failures in
sof_probe_continue() otherwise its internal "batching"
feature (different from caching) cached the firmware image
forever. Attempts to correct the file in /lib/firmware/ were then
silently and confusingly ignored until the next reboot. Unloading the
drivers did not help because from their disconnected perspective the
firmware had failed so there was nothing to release.

Also leverage the new snd_sof_fw_unload() function to simplify the
snd_sof_device_remove() function.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dell's requirement to have headset mic as phantom jack on this
specific dolphin hardware platform.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210916095646.7631-1-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The following preprocessor directive is non-compliant:

	#undef PCXHR_REG_TO_PORT(x)

gcc warns about extra tokens but nobody sees them as they are under if
branch which is never parsed.

Make it an #error, it is not clear to me what the author meant.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/YUCCv47sm4zf9OVO@localhost.localdomainSigned-off-by: Takashi Iwai <tiwai@suse.de>

i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3)
bars, everything else is left as 0 in sdev->bar[] array.

If a broken or purposefully crafted firmware image is loaded with other
types of FW_BLK_TYPE then a kernel crash can be triggered.

Make sure that only IRAM/SRAM type is converted to bar index.

Fixes: afb93d71 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3)
bars, everything else is left as 0 in sdev->bar[] array.

If a broken or purposefully crafted firmware image is loaded with other
types of FW_BLK_TYPE then a kernel crash can be triggered.

Make sure that only IRAM/SRAM type is converted to bar index.

Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210915122116.18317-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix @buf arg given to hex_dump_to_buffer() and stack address used
in dump error output.

Fixes: e657c18a ('ASoC: SOF: Add xtensa support')
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210915063230.29711-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.

This patch initializes and enables speaker output on the Lenovo Legion 7i
15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 series of laptops using the
HDA verb sequence specific to each model.

Speaker automute is suppressed for the Lenovo Legion 7i 15IMHG05 to avoid
breaking speaker output on resume and when devices are unplugged from its
headphone jack.

Thanks to: Andreas Holzer, Vincent Morel, sycxyc, Max Christian Pohle and
all others that helped.

[ minor coding style fixes by tiwai ]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913212627.339362-1-cam@neo-zeon.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

USB-audio driver assumes that the normal resume would preserve the
device configuration while reset_resume wouldn't, and tries to restore
the mixer elements only at reset_resume callback.  However, this seems
too naive, and some devices do behave differently, resetting the
volume at the normal resume; this resulted in the inconsistent volume
that surprised users.

This patch changes the mixer resume code to handle both the normal and
reset resume in the same way, always restoring the original mixer
element values.  This allows us to unify the both callbacks as well as
dropping the no longer used reset_resume field, which ends up with a
good code reduction.

A slight behavior change by this patch is that now we assign
restore_mixer_value() as the default resume callback, and the function
is no longer called at reset-resume when the resume callback is
overridden by the quirk function.  That is, if needed, the quirk
resume function would have to handle similarly as
restore_mixer_value() by itself.
Reported-by: En-Shuo Hsu <enshuo@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Link: https://lore.kernel.org/r/CADDZ45UPsbpAAqP6=ZkTT8BE-yLii4Y7xSDnjK550G2DhQsMew@mail.gmail.com
Link: https://lore.kernel.org/r/20210910105155.12862-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 8fc8e903.

It was expected that the fixes in HD-audio codec side would make the
workaround redundant, but unfortunately it doesn't seem sufficing.
Resurrect the workaround for now.

Fixes: 8fc8e903 ("ALSA: hda: Drop workaround for a hang at shutdown again")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210913124330.24530-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Loud Technologies Mackie Onyx 1640i (former model) is identified as
the model which uses OXFW971. The analysis of packet dump shows that
it transfers events in blocking method of IEC 61883-6, however the
default behaviour of ALSA oxfw driver is for non-blocking method.

This commit adds code to detect it assuming that all of loud models
based on OXFW971 have such quirk. It brings no functional change
except for alignment rule of PCM buffer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210913021042.10085-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Pull coccinelle updates from Julia Lawall:
 "These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive