- 11 Jul, 2022 1 commit
-
-
Chuck Lever authored
NFSD has advertised support for the NFSv4 time_create attribute since commit e377a3e6 ("nfsd: Add support for the birth time attribute"). Igor Mammedov reports that Mac OS clients attempt to set the NFSv4 birth time attribute via OPEN(CREATE) and SETATTR if the server indicates that it supports it, but since the above commit was merged, those attempts now fail. Table 5 in RFC 8881 lists the time_create attribute as one that can be both set and retrieved, but the above commit did not add server support for clients to provide a time_create attribute. IMO that's a bug in our implementation of the NFSv4 protocol, which this commit addresses. Whether NFSD silently ignores the new birth time or actually sets it is another matter. I haven't found another filesystem service in the Linux kernel that enables users or clients to modify a file's birth time attribute. This commit reflects my (perhaps incorrect) understanding of whether Linux users can set a file's birth time. NFSD will now recognize a time_create attribute but it ignores its value. It clears the time_create bit in the returned attribute bitmask to indicate that the value was not used. Reported-by:
Igor Mammedov <imammedo@redhat.com> Fixes: e377a3e6 ("nfsd: Add support for the birth time attribute") Tested-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com>
-
- 30 Jun, 2022 1 commit
-
-
Chuck Lever authored
Looks like there are still cases when "space_left - frag1bytes" can legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains within the current encode buffer. Reported-by:
Bruce Fields <bfields@fieldses.org> Reported-by:
Zorro Lang <zlang@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151 Fixes: 6c254bf3 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()") Signed-off-by:
-
- 27 Jun, 2022 1 commit
-
-
Alexey Khoroshilov authored
commit 555dbf1a ("nfsd: Replace use of rwsem with errseq_t") incidentally broke translation of -EINVAL to nfserr_notsupp. The patch restores that. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 555dbf1a ("nfsd: Replace use of rwsem with errseq_t") Signed-off-by:
-
- 08 Jun, 2022 5 commits
-
-
Chuck Lever authored
To make the code easier to read, remove visual clutter by changing the declared type of @p. Signed-off-by:
NeilBrown <neilb@suse.de> Reviewed-by:
-
Chuck Lever authored
The value of @p is not used until the "location of the next item" is computed. Help human readers by moving its initial assignment to the paragraph where that value is used and by clarifying the antecedents in the documenting comment. Signed-off-by:
NeilBrown <neilb@suse.com> Reviewed-by:
-
Chuck Lever authored
Both the kvec::iov_len field and the third parameter of memcpy() and memmove() are size_t. There's no reason for the implicit conversion from size_t to int and back. Change the type of @shift to make the code easier to read and understand. Signed-off-by:
-
Chuck Lever authored
Transitioning between encode buffers is quite infrequent. It happens about 1 time in 400 calls to xdr_reserve_space(), measured on NFSD with a typical build/test workload. Force the compiler to remove that code from xdr_reserve_space(), which is a hot path on both the server and the client. This change reduces the size of xdr_reserve_space() from 10 cache lines to 2 when compiled with -Os. Signed-off-by:
-
Chuck Lever authored
I found that NFSD's new NFSv3 READDIRPLUS XDR encoder was screwing up right at the end of the page array. xdr_get_next_encode_buffer() does not compute the value of xdr->end correctly: * The check to see if we're on the final available page in xdr->buf needs to account for the space consumed by @nbytes. * The new xdr->end value needs to account for the portion of @nbytes that is to be encoded into the previous buffer. Fixes: 2825a7f9 ("nfsd4: allow encoding across page boundaries") Signed-off-by:
-
- 02 Jun, 2022 2 commits
-
-
Chuck Lever authored
Prevent svc_rdma_build_writes() from walking off the end of a Write chunk's segment array. Caught with KASAN. The test that this fix replaces is invalid, and might have been left over from an earlier prototype of the PCL work. Fixes: 7a1cbfa1 ("svcrdma: Use parsed chunk lists to construct RDMA Writes") Signed-off-by:
-
Chuck Lever authored
nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref(). Suggested-by:
Trond Myklebust <trondmy@hammerspace.com> Fixes: 99939792 ("nfsd: Clean up nfsd_file_put()") Signed-off-by:
-
- 29 May, 2022 1 commit
-
-
Jeff Layton authored
Chuck has agreed to backstop me as maintainer of the file locking code, and I'll do the same for him on knfsd. Signed-off-by:
-
- 26 May, 2022 4 commits
-
-
Chuck Lever authored
Now that there are no more callers of nfsd_file_put() that might hold a spin lock, ensure the lockdep infrastructure can catch newly introduced calls to nfsd_file_put() made while a spinlock is held. Link: https://lore.kernel.org/linux-nfs/ece7fd1d-5fb3-5155-54ba-347cfc19bd9a@oracle.com/T/#mf1855552570cf9a9c80d1e49d91438cd9085aadaSigned-off-by:
-
Chuck Lever authored
And return explicit nfserr values that match what is documented in the new comment / API contract. Signed-off-by: -
Chuck Lever authored
Refactor: Use existing helpers that other lock operations use. This change removes several automatic variables, so re-organize the variable declarations for readability. Signed-off-by: -
Chuck Lever authored
nfsd4_release_lockowner() holds clp->cl_lock when it calls check_for_locks(). However, check_for_locks() calls nfsd_file_get() / nfsd_file_put() to access the backing inode's flc_posix list, and nfsd_file_put() can sleep if the inode was recently removed. Let's instead rely on the stateowner's reference count to gate whether the release is permitted. This should be a reliable indication of locks-in-use since file lock operations and ->lm_get_owner take appropriate references, which are released appropriately when file locks are removed. Reported-by:
Dai Ngo <dai.ngo@oracle.com> Signed-off-by:
-
- 23 May, 2022 10 commits
-
-
Julian Schroeder authored
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is tracked via a percpu counter. In the current code the percpu counter is destroyed before. If any pending cache is still present, percpu_counter_add is called with a percpu counter==NULL. This causes a kernel crash. The solution is to destroy the percpu counter after the cache is freed. Fixes: e567b98c (“nfsd: protect concurrent access to nfsd stats counters”) Signed-off-by:
Julian Schroeder <jumaco@amazon.com> Signed-off-by:
-
Zhang Xiaoxu authored
KASAN report null-ptr-deref as follows: BUG: KASAN: null-ptr-deref in nfsd_fill_super+0xc6/0xe0 [nfsd] Write of size 8 at addr 000000000000005d by task a.out/852 CPU: 7 PID: 852 Comm: a.out Not tainted 5.18.0-rc7-dirty #66 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xab/0x120 ? nfsd_mkdir+0x71/0x1c0 [nfsd] ? nfsd_fill_super+0xc6/0xe0 [nfsd] nfsd_fill_super+0xc6/0xe0 [nfsd] ? nfsd_mkdir+0x1c0/0x1c0 [nfsd] get_tree_keyed+0x8e/0x100 vfs_get_tree+0x41/0xf0 __do_sys_fsconfig+0x590/0x670 ? fscontext_read+0x180/0x180 ? anon_inode_getfd+0x4f/0x70 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This can be reproduce by concurrent operations: 1. fsopen(nfsd)/fsconfig 2. insmod/rmmod nfsd Since the nfsd file system is registered before than nfsd_net allocated, the caller may get the file_system_type and use the nfsd_net before it allocated, then null-ptr-deref occurred. So init_nfsd() should call register_filesystem() last. Fixes: bd5ae928 ("nfsd: register pernet ops last, unregister first") Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Zhang Xiaoxu authored
If laundry_wq create failed, the cld notifier should be unregistered. Signed-off-by:
-
Chuck Lever authored
I noticed CPU pipeline stalls while using perf. Once an svc thread is scheduled and executing an RPC, no other processes will touch svc_rqst::rq_flags. Thus bus-locked atomics are not needed outside the svc thread scheduler. Signed-off-by: -
Chuck Lever authored
The flags are defined using C macros, so TRACE_DEFINE_ENUM is unnecessary. Signed-off-by: -
Chuck Lever authored
Instrument calls to nfsd_open_verified() to get a sense of the filecache hit rate. Signed-off-by: -
Chuck Lever authored
Clean up nfsd4_open() by converting a large comment at the only call site for nfsd4_process_open2() to a kerneldoc comment in front of that function. Signed-off-by: -
Chuck Lever authored
Clean up: Pull case arms back one tab stop to conform every other switch statement in fs/nfsd/nfs4proc.c. Signed-off-by: -
Chuck Lever authored
Clean up: These relics are not likely to benefit server administrators. Signed-off-by: -
Chuck Lever authored
There have been reports of races that cause NFSv4 OPEN(CREATE) to return an error even though the requested file was created. NFSv4 does not provide a status code for this case. To mitigate some of these problems, reorganize the NFSv4 OPEN(CREATE) logic to allocate resources before the file is actually created, and open the new file while the parent directory is still locked. Two new APIs are added: + Add an API that works like nfsd_file_acquire() but does not open the underlying file. The OPEN(CREATE) path can use this API when it already has an open file. + Add an API that is kin to dentry_open(). NFSD needs to create a file and grab an open "struct file *" atomically. The alloc_empty_file() has to be done before the inode create. If it fails (for example, because the NFS server has exceeded its max_files limit), we avoid creating the file and can still return an error to the NFS client. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=382Signed-off-by:
JianHong Yin <jiyin@redhat.com>
-
- 20 May, 2022 7 commits
-
-
Chuck Lever authored
Its only caller always passes S_IFREG as the @type parameter. As an additional clean-up, add a kerneldoc comment. Signed-off-by: -
Chuck Lever authored
Now that its two callers have their own version-specific instance of this function, do_nfsd_create() is no longer used. Signed-off-by: -
Chuck Lever authored
Copy do_nfsd_create() to nfs4proc.c and remove NFSv3-specific logic. Signed-off-by: -
Chuck Lever authored
The NFSv3 CREATE and NFSv4 OPEN(CREATE) use cases are about to diverge such that it makes sense to split do_nfsd_create() into one version for NFSv3 and one for NFSv4. As a first step, copy do_nfsd_create() to nfs3proc.c and remove NFSv4-specific logic. One immediate legibility benefit is that the logic for handling NFSv3 createhow is now quite straightforward. NFSv4 createhow has some subtleties that IMO do not belong in generic code. Signed-off-by: -
Chuck Lever authored
I'd like to move do_nfsd_create() out of vfs.c. Therefore nfsd_create_setattr() needs to be made publicly visible. Note that both call sites in vfs.c commit both the new object and its parent directory, so just combine those common metadata commits into nfsd_create_setattr(). Signed-off-by: -
Chuck Lever authored
Clean up: The "out" label already invokes fh_drop_write(). Note that fh_drop_write() is already careful not to invoke mnt_drop_write() if either it has already been done or there is nothing to drop. Therefore no change in behavior is expected. Signed-off-by: -
Chuck Lever authored
As near as I can tell, mode bit masking and setting S_IFREG is already done by do_nfsd_create() and vfs_create(). The NFSv4 path (do_open_lookup), for example, does not bother with this special processing. Signed-off-by:
-
- 19 May, 2022 8 commits
-
-
Chuck Lever authored
Clean up: There is one caller. The @cpu argument can be made implicit now that a get_cpu/put_cpu pair is no longer needed. Signed-off-by: -
Sebastian Andrzej Siewior authored
svc_xprt_enqueue() disables preemption via get_cpu() and then asks for a pool of a specific CPU (current) via svc_pool_for_cpu(). While preemption is disabled, svc_xprt_enqueue() acquires svc_pool::sp_lock with bottom-halfs disabled, which can sleep on PREEMPT_RT. Disabling preemption is not required here. The pool is protected with a lock so the following list access is safe even cross-CPU. The following iteration through svc_pool::sp_all_threads is under RCU-readlock and remaining operations within the loop are atomic and do not rely on disabled-preemption. Use raw_smp_processor_id() as the argument for the requested CPU in svc_pool_for_cpu(). Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Dai Ngo authored
Update client_info_show to show state of courtesy client and seconds since last renew. Reviewed-by:
-
Dai Ngo authored
This patch allows expired client with lock state to be in COURTESY state. Lock conflict with COURTESY client is resolved by the fs/lock code using the lm_lock_expirable and lm_expire_lock callback in the struct lock_manager_operations. If conflict client is in COURTESY state, set it to EXPIRABLE and schedule the laundromat to run immediately to expire the client. The callback lm_expire_lock waits for the laundromat to flush its work queue before returning to caller. Reviewed-by:
-
Dai Ngo authored
Add 2 new callbacks, lm_lock_expirable and lm_expire_lock, to lock_manager_operations to allow the lock manager to take appropriate action to resolve the lock conflict if possible. A new field, lm_mod_owner, is also added to lock_manager_operations. The lm_mod_owner is used by the fs/lock code to make sure the lock manager module such as nfsd, is not freed while lock conflict is being resolved. lm_lock_expirable checks and returns true to indicate that the lock conflict can be resolved else return false. This callback must be called with the flc_lock held so it can not block. lm_expire_lock is called to resolve the lock conflict if the returned value from lm_lock_expirable is true. This callback is called without the flc_lock held since it's allowed to block. Upon returning from this callback, the lock conflict should be resolved and the caller is expected to restart the conflict check from the beginnning of the list. Lock manager, such as NFSv4 courteous server, uses this callback to resolve conflict by destroying lock owner, or the NFSv4 courtesy client (client that has expired but allowed to maintains its states) that owns the lock. Reviewed-by:
-
Dai Ngo authored
Add helper locks_owner_has_blockers to check if there is any blockers for a given lockowner. Reviewed-by:
-
Dai Ngo authored
This patch moves create/destroy of laundry_wq from nfs4_state_start and nfs4_state_shutdown_net to init_nfsd and exit_nfsd to prevent the laundromat from being freed while a thread is processing a conflicting lock. Reviewed-by:
-
Dai Ngo authored
This patch allows expired client with open state to be in COURTESY state. Share/access conflict with COURTESY client is resolved by setting COURTESY client to EXPIRABLE state, schedule laundromat to run and returning nfserr_jukebox to the request client. Reviewed-by:
-
