- 17 Jan, 2013 33 commits
-
-
Armen Baloyan authored
commit 63ea923a upstream. FC transport on receiving bsg_job submission failure, calls bsg_job->job_done() and sets the bsg_job->reply->result the returned value. In contrast, when the success code (0) is returned fc transport doesn't call bsg_job->job_done() and doesn't populate bsg_job->reply->result. Signed-off-by:
Steve Hodgson <steve@purestorage.com> Signed-off-by:
Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sasha Levin authored
commit 072f19b4 upstream. store_host_reset() has tried to re-invent the wheel to compare sysfs strings. Unfortunately it did so poorly and never bothered to check the input from userspace before overwriting stack with it, so something simple as: echo "WoopsieWoopsie" > /sys/devices/pseudo_0/adapter0/host0/scsi_host/host0/host_reset would result in: [ 316.310101] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81f5bac7 [ 316.310101] [ 316.320051] Pid: 6655, comm: sh Tainted: G W 3.7.0-rc5-next-20121114-sasha-00016-g5c9d68d-dirty #129 [ 316.320051] Call Trace: [ 316.340058] pps pps0: PPS event at 1352918752.620355751 [ 316.340062] pps pps0: capture assert seq #303 [ 316.320051] [<ffffffff83b3856b>] panic+0xcd/0x1f4 [ 316.320051] [<ffffffff81f5bac7>] ? store_host_reset+0xd7/0x100 [ 316.320051] [<ffffffff8110b996>] __stack_chk_fail+0x16/0x20 [ 316.320051] [<ffffffff81f5bac7>] store_host_reset+0xd7/0x100 [ 316.320051] [<ffffffff81e55bb3>] dev_attr_store+0x13/0x30 [ 316.320051] [<ffffffff812f7db1>] sysfs_write_file+0x101/0x170 [ 316.320051] [<ffffffff8127acc8>] vfs_write+0xb8/0x180 [ 316.320051] [<ffffffff8127ae80>] sys_write+0x50/0xa0 [ 316.320051] [<ffffffff83c03418>] tracesys+0xe1/0xe6 Fix this by uninventing whatever was going on there and just use sysfs_streq. Bug introduced by 29443691 ("[SCSI] scsi: Added support for adapter and firmware reset"). [jejb: added necessary const to prevent compile warnings] Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Xi Wang authored
commit beecadea upstream. The macro bit(n) is defined as ((u32)1 << n), and thus it doesn't work with n >= 32, such as in mvs_94xx_assign_reg_set(): if (i >= 32) { mvi->sata_reg_set |= bit(i); ... } The shift ((u32)1 << n) with n >= 32 also leads to undefined behavior. The result varies depending on the architecture. This patch changes bit(n) to do a 64-bit shift. It also simplifies mv_ffc64() using __ffs64(), since invoking ffz() with ~0 is undefined. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Acked-by:
Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by:
-
Sangbeom Kim authored
commit f7ebaaeb upstream. This patch fix the abnormal ramp delay setting. The shift operation was wrong. Signed-off-by:
Sangbeom Kim <sbkim73@samsung.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit a3adb143 upstream. The 'addr' field of the sigma_action struct is stored as big endian in the firmware file. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Mark Brown authored
commit 72222be3 upstream. Signed-off-by:
-
Bjørn Mork authored
commit 3935e895 upstream. Commit 8d451690 ("watchdog: Fix CPU hotplug regression") causes an oops or hard lockup when doing echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog and the kernel is booted with nmi_watchdog=1 (default) Running laptop-mode-tools and disconnecting/connecting AC power will cause this to trigger, making it a common failure scenario on laptops. Instead of bailing out of watchdog_disable() when !watchdog_enabled we can initialize the hrtimer regardless of watchdog_enabled status. This makes it safe to call watchdog_disable() in the nmi_watchdog=0 case, without the negative effect on the enabled => disabled => enabled case. All these tests pass with this patch: - nmi_watchdog=1 echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog - nmi_watchdog=0 echo 0 > /sys/devices/system/cpu/cpu1/online - nmi_watchdog=0 echo mem > /sys/power/state Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661Signed-off-by:
Bjørn Mork <bjorn@mork.no> Cc: Norbert Warmuth <nwarmuth@t-online.de> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stephan Gatzka authored
commit 9d237342 upstream. This patch fixes both the transmit and receive portion of sending fragmented mutlicast and broadcast packets. The transmit section was broken because the offset for INTFRAG and LASTFRAG packets were just miscalculated by IEEE1394_GASP_HDR_SIZE (which was reserved with skb_push() in fwnet_send_packet). The receive section was broken because in fwnet_incoming_packet is a call to fwnet_peer_find_by_node_id(). Called with generation == -1 it will not find a peer and the partial datagrams are associated to a peer. [Stefan R: The fix to use context->card->generation is not perfect. It relies on the IR tasklet which processes packets from the prior bus generation to run before the self-ID-complete worklet which sets the current card generation. Alas, there is no simple way of a race-free implementation. Let's do it this way for now.] Signed-off-by:
Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Christian Lamparter authored
commit 6c653f66 upstream. Sean reported that as of 3.7, his AR9170 device no longer works because the driver fails during initialization. He noted this is due to: "In carl9170/fw.c, ar->hw->wiphy is tagged with NL80211_IFTYPE_MESH_POINT support if the firmware has Content after Beacon Queuing. This is both in interface_modes and the only iface_combinations entry. If CONFIG_MAC80211_MESH is not set, ieee80211_register_hw removes NL80211_IFTYPE_MESH_POINT from interface_modes, but not iface_combinations. wiphy_register then checks to see if every interface type in every interface combination is in interface_modes. NL80211_IFTYPE_MESH_POINT was removed, so you get a WARN_ON warning and it returns -EINVAL, giving up." Unfortunately, the iface_combination (types) feature bitmap in ieee80211_iface_limit is part of a const member in the ieee80211_iface_combination struct. Hence, the MESH_POINT feature flag can't be masked by wiphy_register in the same way as interface_modes in ieee80211_register_hw. Reported-by:
Sean Patrick Santos <quantheory@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Tested-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 5b632fe8 upstream. Commit f0425bed "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a4 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425bed, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> [replaced link with mid.gmane.org that has message-id] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sujith Manoharan authored
commit a796a1dd upstream. Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
commit b7c0c238 upstream. While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor for a chip measured in clean air, it refers to the lowest expected reading. Depending on the frequency, this measurement can vary by about 6db, thus causing a higher reported channel noise and signal strength. Factor in the 6db offset when converting internal noisefloor to channel noise. This patch makes the reported values more accurate for all chips without affecting NF calibration behavior. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Gabor Juhos authored
commit b3cd8021 upstream. Trying to access the OTP memory on the AR9340 causes a data bus error like this: Data bus error, epc == 86e84164, ra == 86e84164 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 001f0041 00000000 7c7c7c3c $16 : 86ee0000 00015f18 00000000 00000007 $20 : 00000004 00000064 00000004 86d71c44 $24 : 00000000 86e6ca00 $28 : 86d70000 86d71b20 86ece0c0 86e84164 Hi : 00000000 Lo : 00000064 epc : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Tainted: G O ra : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Status: 1100d403 KERNEL EXL IE Cause : 4080801c PrId : 0001974c (MIPS 74Kc) Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440) Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88 86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20 000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938 fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000 99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000 ... Call Trace: [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw] [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw] Code: 0000a812 0040f809 00000000 <00531024> 1054000b 24020001 0c05b5dc 2404000a 26520001 The cause of the error is that the OTP register offsets are different on the AR9340 than the actually used values. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
commit 9c170e06 upstream. This reverts commit f74b9d36. Turns out reverting commit a240dc7b "ath9k_hw: Updated AR9003 tx gain table for 5GHz" was not enough to bring the tx power back to normal levels on devices like the Buffalo WZR-HP-G450H, this one needs to be reverted as well. This revert improves tx power by ~10 db on that device Signed-off-by:
-
Rajkumar Manoharan authored
commit 16802602 upstream. This reduced the power consumption to half in full and network sleep. Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Paul Stewart <pstew@chromium.org> Signed-off-by:
-
Max Filippov authored
commit 10d73e65 upstream. Currently free_all_bootmem_core ignores that node_min_pfn may be not multiple of BITS_PER_LONG. Eg commit 6dccdcbe ("mm: bootmem: fix checking the bitmap when finally freeing bootmem") shifts vec by lower bits of start instead of lower bits of idx. Also if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL) assumes that vec bit 0 corresponds to start pfn, which is only true when node_min_pfn is a multiple of BITS_PER_LONG. Also loop in the else clause can double-free pages (e.g. with node_min_pfn == start == 1, map[0] == ~0 on 32-bit machine page 32 will be double-freed). This bug causes the following message during xtensa kernel boot: bootmem::free_all_bootmem_core nid=0 start=1 end=8000 BUG: Bad page state in process swapper pfn:00001 page:d04bd020 count:0 mapcount:-127 mapping: (null) index:0x2 page flags: 0x0() Call Trace: bad_page+0x8c/0x9c free_pages_prepare+0x5e/0x88 free_hot_cold_page+0xc/0xa0 __free_pages+0x24/0x38 __free_pages_bootmem+0x54/0x56 free_all_bootmem_core$part$11+0xeb/0x138 free_all_bootmem+0x46/0x58 mem_init+0x25/0xa4 start_kernel+0x11e/0x25c should_never_return+0x0/0x3be7 The fix is the following: - always align vec so that its bit 0 corresponds to start - provide BITS_PER_LONG bits in vec, if those bits are available in the map - don't free pages past next start position in the else clause. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Prasad Koya <prasad.koya@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Laura Abbott authored
commit c060f943 upstream. The current calculation in pfn_to_bitidx assumes that (pfn - zone->zone_start_pfn) >> pageblock_order will return the same bit for all pfn in a pageblock. If zone_start_pfn is not aligned to pageblock_nr_pages, this may not always be correct. Consider the following with pageblock order = 10, zone start 2MB: pfn | pfn - zone start | (pfn - zone start) >> page block order ---------------------------------------------------------------- 0x26000 | 0x25e00 | 0x97 0x26100 | 0x25f00 | 0x97 0x26200 | 0x26000 | 0x98 0x26300 | 0x26100 | 0x98 This means that calling {get,set}_pageblock_migratetype on a single page will not set the migratetype for the full block. Fix this by rounding down zone_start_pfn when doing the bitidx calculation. For our use case, the effects of this bug were mostly tied to the fact that CMA allocations would either take a long time or fail to happen. Depending on the driver using CMA, this could result in anything from visual glitches to application failures. Signed-off-by:
Laura Abbott <lauraa@codeaurora.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Jason Liu authored
commit 7964c06d upstream. when run the folloing command under shell, it will return error sh/$ echo 1 > /proc/sys/vm/compact_memory sh/$ sh: write error: Bad address After strace, I found the following log: ... write(1, "1\n", 2) = 3 write(1, "", 4294967295) = -1 EFAULT (Bad address) write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address ) = 31 This tells system return 3(COMPACT_COMPLETE) after write data to compact_memory. The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE) from sysctl_compaction_handler after compaction_nodes finished. Signed-off-by:
Jason Liu <r64343@freescale.com> Suggested-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Huacai Chen authored
commit 8add1ecb upstream. When poweroff machine, kernel_power_off() call disable_nonboot_cpus(). And if we have HOTPLUG_CPU configured, disable_nonboot_cpus() is not an empty function but attempt to actually disable the nonboot cpus. Since system state is SYSTEM_POWER_OFF, play_dead() won't be called and thus disable_nonboot_cpus() hangs. Therefore, we make this patch to avoid poweroff failure. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Hongliang Tao <taohl@lemote.com> Signed-off-by:
Hua Yan <yanh@lemote.com> Cc: Yong Zhang <yong.zhang@windriver.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4211/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Sebastian Ott authored
commit d99e79ec upstream. The check to whom a device is reserved is done by checking the path state of the affected channel paths. If it turns out that one path is flagged as reserved by someone else the whole device is marked as such. However the meaning of the RESVD_ELSE bit is that the addressed device is reserved to a different pathgroup (and not reserved to a different LPAR). If we do this test on a path which is currently not a member of the pathgroup we could erroneously mark the device as reserved to someone else. To fix this collect the reserved state for all potential members of the pathgroup and only mark the device as reserved if all of those potential members have the RESVD_ELSE bit set. Acked-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Alex Williamson authored
commit 5419369e upstream. Prior to memory slot sorting this loop compared all of the user memory slots for overlap with new entries. With memory slot sorting, we're just checking some number of entries in the array that may or may not be user slots. Instead, walk all the slots with kvm_for_each_memslot, which has the added benefit of terminating early when we hit the first empty slot, and skip comparison to private slots. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Scott Wood authored
commit e400e72f upstream. We were only allocating half the bytes we need, which was made more obvious by a recent fix to the memset in clear_tlb1_bitmap(). Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Gabor Juhos authored
commit e6449c9b upstream. The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe0 (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf (of/flattree: Add of_flat_dt_match() helper function). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Shan Hai authored
commit ce73ec6d upstream. The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by:
Shan Hai <shan.hai@windriver.com> Signed-off-by:
-
Anton Blanchard authored
commit 11ee7e99 upstream. If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n, the kernel fails when we run at a non zero offset. It turns out we were incorrectly wrapping some of the relocatable kernel code with CONFIG_CRASH_DUMP. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Christian Borntraeger authored
commit ce6a04ac upstream. I was chasing down a bug of random validity intercepts on s390. (guest prefix page not mapped in the host virtual aspace). Turns out that the problem was a wrong address space control element. The cause was quite complex: During paging activity a DAT protection during SIE caused a program interrupt. Normally, the sie retry loop tries to catch all interrupts during and shortly before sie to rerun the setup. The problem is now that protection causes a suppressing program interrupt, causing the PSW to point to the instruction AFTER SIE in case of DAT protection. This confused the logic of the retry loop to not trigger, instead we jumped directly back to SIE after return from the program interrupt. (the protection fault handler itself did a rewind of the psw). This usually works quite well, but: If now the protection fault handler has to wait, another program might be scheduled in. Later on the sie process will be schedules in again. In that case the content of CR1 (primary address space) will be wrong because switch_to will put the user space ASCE into CR1 and not the guest ASCE. In addition the program parameter is also wrong for every protection fault of a guest, since we dont issue the SPP instruction. So lets also check for PSW == instruction after SIE in the program check handler. Instead of expensively checking all program interruption codes that might be suppressing we assume that a program interrupt pointing after SIE was always a program interrupt in SIE. (Otherwise we have a kernel bug anyway). We also have to compensate the rewinding, since the C-level handlers will do that. Therefore we need to add a nop with the same length as SIE before the sie_loop. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
commit 87cac8f8 upstream. Newer kernels (linux-next with the transparent huge page patches) use rrbm if the feature is announced via feature bit 66. RRBM will cause intercepts, so KVM does not handle it right now, causing an illegal instruction in the guest. The easy solution is to disable the feature bit for the guest. This fixes bugs like: Kernel BUG at 0000000000124c2a [verbose debug info unavailable] illegal operation: 0001 [#1] SMP Modules linked in: virtio_balloon virtio_net ipv6 autofs4 CPU: 0 Not tainted 3.5.4 #1 Process fmempig (pid: 659, task: 000000007b712fd0, ksp: 000000007bed3670) Krnl PSW : 0704d00180000000 0000000000124c2a (pmdp_clear_flush_young+0x5e/0x80) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 00000000003cc000 0000000000000004 0000000000000000 0000000079800000 0000000000040000 0000000000000000 000000007bed3918 000000007cf40000 0000000000000001 000003fff7f00000 000003d281a94000 000000007bed383c 000000007bed3918 00000000005ecbf8 00000000002314a6 000000007bed36e0 Krnl Code:>0000000000124c2a: b9810025 ogr %r2,%r5 0000000000124c2e: 41343000 la %r3,0(%r4,%r3) 0000000000124c32: a716fffa brct %r1,124c26 0000000000124c36: b9010022 lngr %r2,%r2 0000000000124c3a: e3d0f0800004 lg %r13,128(%r15) 0000000000124c40: eb22003f000c srlg %r2,%r2,63 [ 2150.713198] Call Trace: [ 2150.713223] ([<00000000002312c4>] page_referenced_one+0x6c/0x27c) [ 2150.713749] [<0000000000233812>] page_referenced+0x32a/0x410 [...] Signed-off-by:
-
Helmut Schaa authored
commit f5685ba6 upstream. Otherwise rt2500* triggers a warning in cfg80211, from net/wireless/core.c: /* Combinations with just one interface aren't real */ if (WARN_ON(c->max_interfaces < 2)) This was introduced in commit 55d2e9da: rt2x00: Replace open coded interface checking with interface combinations. Reported-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Tested-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
-
Rafał Miłecki authored
commit cbbc0138 upstream. We were using wrong IRQ number so clearing wasn't working at all. Depending on a platform this could result in a one device having two interrupts assigned. On BCM4706 this resulted in all IRQs being broken. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Emmanuel Grumbach authored
commit 27edb1ac upstream. We know that we have issues with the fw in the reclaim path. This is why iwl_reclaim doesn't complain too loud when it happens since it is recoverable. Somehow, the caller of iwl_reclaim however WARNed when it happens. This doesn't make any sense. When I digged into the history of that code, I discovered that this bug occurs only when we receive a BA notification. So move the W/A in the BA notification handling code where it was before. This patch addresses: http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2387Reported-by:
Florian Reitmeir <florian@reitmeir.org> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 25a17265 upstream. This can lead to a panic if the driver isn't ready to handle them. Since our interrupt line is shared, we can get an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks that even when the interrupt is being freed). If the op_mode has gone away, we musn't call it. To avoid this the transport disables the interrupts when the hw is stopped and the op_mode is leaving. If there is an event that would cause an interrupt the INTA register is updated regardless of the enablement of the interrupts: even if the interrupts are disabled, the INTA will be changed, but the device won't issue an interrupt. But the ISR can be called at any time, so we ought ignore the value in the INTA otherwise we can call the op_mode after it was freed. I found this bug when the op_mode_start failed, and called iwl_trans_stop_hw(trans, true). Then I played with the RFKILL button, and removed the module. While removing the module, the IRQ is freed, and the ISR is called (CONFIG_DEBUG_SHIRQ enabled). Panic. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Felix Fietkau authored
commit 596ab5ec upstream. ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by:
-
Mark Brown authored
commit 13ae633c upstream. Reported-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
- 11 Jan, 2013 7 commits
-
-
Greg Kroah-Hartman authored
-
Jeff Layton authored
commit 2f2591a3 upstream. Oliver reported that commit cd60042c caused his cifs mounts to continually thrash through new inodes on readdir. His servers are not sending inode numbers (or he's not using them), and the new test in that function doesn't account for that sort of setup correctly. If we're not using server inode numbers, then assume that the inode attached to the dentry hasn't changed. Go ahead and update the attributes in place, but keep the same inode number. Reported-and-Tested-by:
Oliver Mössinger <Oliver.Moessinger@ichaus.de> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Jeff Layton authored
commit eb1b3fa5 upstream. The caller doesn't do anything with the dentry, so there's no point in holding a reference to it on return. Also cifs_prime_dcache better describes the actual purpose of the function. Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Alexander Stein authored
commit ab48b03e upstream. If the restart timer is running due to BUS-OFF and the device is disconnected an dev_put will decrease the usage counter to -1 thus blocking the interface removal, resulting in the following dmesg lines repeating every 10s: can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 unregister_netdevice: waiting for can0 to become free. Usage count = -1 Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ben Hutchings authored
commit f9af7b9e upstream. Commit 0a97e1e9 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID') did not update the special driver list in hid-core.c, so hid-generic may still bind to this device. Reported-by:
Ari Pollak <ari@scvngr.com> References: http://bugs.debian.org/694546Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Guenter Roeck authored
commit c4e18497 upstream. Commit 263a523d ("linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST") fixes a warning seen with W=1 due to change in DIV_ROUND_CLOSEST. Unfortunately, the C compiler converts divide operations with unsigned divisors to unsigned, even if the dividend is signed and negative (for example, -10 / 5U = 858993457). The C standard says "If one operand has unsigned int type, the other operand is converted to unsigned int", so the compiler is not to blame. As a result, DIV_ROUND_CLOSEST(0, 2U) and similar operations now return bad values, since the automatic conversion of expressions such as "0 - 2U/2" to unsigned was not taken into account. Fix by checking for the divisor variable type when deciding which operation to perform. This fixes DIV_ROUND_CLOSEST(0, 2U), but still returns bad values for negative dividends divided by unsigned divisors. Mark the latter case as unsupported. One observed effect of this problem is that the s2c_hwmon driver reports a value of 4198403 instead of 0 if the ADC reads 0. Other impact is unpredictable. Problem is seen if the divisor is an unsigned variable or constant and the dividend is less than (divisor/2). Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Juergen Beisert <jbe@pengutronix.de> Tested-by:
-
Michal Hocko authored
commit 53a59fc6 upstream. Since commit e303297e ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
