QSPI1 cannot wake up CCM from WAIT mode on SX ARD board, add pmqos to
let PM NOT enter WAIT mode when accessing QSPI1, refer to TKT245618.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Han Xu <Han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

We found there is a low probability(5%) QSPI access timeout issue,
usually it happened on kernel boot stage, the first time kernel tried to
access QSPI chip. The READ_ID command was sent but not executed,
consequently the probe function failed.

The root cause is that the divider is not glitchless in i.MX6SX chip.
If qspi clock enabled then change clock frequency by call clk_set_rate,
there will be glitch at low possiblity rate and pass to qspi controller.
The controler will be hang by this glitch.

Based on the new clock flag(CLK_SET_RATE_GATE) and new framework, we
need to change the approach of seting clock rate.
1. Disable clock.
2. call clk_set_rate.
3. Enable clock again.
Signed-off-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

new compatible string: "fsl,imx6ul-qspi".
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Add i.mx6ul chip support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Han xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

new compatible string: "fsl,imx7d-qspi"
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Support i.mx7d.
quadspi in i.mx7d increase rxfifo.
require fill at least 16byte to trigger data transfer.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

add several quirk to distinguish different version of qspi module.
Signed-off-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

QSPI may failed to map enough memory (256MB) for AHB read in
previous implementation, especially in 3G/1G memory layout kernel.
Dynamically map memory to avoid such issue.

This implementation generally map QUADSPI_MAX_IOMAP (default 4MB) memory
for AHB read, it should be enough for common scenarios, and the side
effect (0.6% performance drop) is minor.

Previous implementation

root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=1K count=32K
32768+0 records in
32768+0 records out
33554432 bytes (34 MB) copied, 2.16006 s, 15.5 MB/s

root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=32M count=1
1+0 records in
1+0 records out
33554432 bytes (34 MB) copied, 1.43149 s, 23.4 MB/s

After applied the patch

root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=1K count=32K
32768+0 records in
32768+0 records out
33554432 bytes (34 MB) copied, 2.1743 s, 15.4 MB/s

root@imx6qdlsolo:~# dd if=/dev/mtd0 of=/dev/null bs=32M count=1
1+0 records in
1+0 records out
33554432 bytes (34 MB) copied, 1.43158 s, 23.4 MB/s
Signed-off-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

When we added the "jedec,spi-nor" compatible string for use in this
driver, we added it as a modalias option. The modalias can be derived in
different ways for platform devices vs. device tree (of_*) matching. But
for device tree matching (the primary target of this identifier string),
the modalias is determined from the first entry in the 'compatible'
property. IOW, the following properties would bind to this driver:

	// Option (a), modalias = "spi-nor"
	compatible = "jedec,spi-nor";

	// Option (b), modalias = "spi-nor"
	compatible = "idontknowwhatimdoing,spi-nor";

But the following would not:

	// Option (c), modalias = "shinynewdevice"
	compatible = "myvendor,shinynewdevice", "jedec,spi-nor";

So, we'd like to match (a) and (c) (even when we don't have an explicit
entry for "shinynewdevice"), and we'd rather not allow (b).

To do this, we
  (1) always (for devices without specific platform data) pass the
      modalias to the spi-nor library;
  (2) rework the spi-nor library to not reject "bad" names, and
      instead just fall back to autodetection; and
  (3) add the .of_match_table to properly catch all "jedec,spi-nor".

This allows (a) and (c) without warnings, and rejects (b).
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Replaces the hard coded "always use EDO" policy with that prescribed
by the ONFI 3.1 specification that EDO mode should always be used if tRC
is below 30ns.
Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

The TIMING_CFG register was previously statically set to a magic value
(extracted from Allwinner's BSP) when initializing the NAND controller.
Now that we have more details about the TIMING_CFG register layout
(extracted from the A83 user manual) we can dynamically calculate the
appropriate value for each NAND chip and set it when selecting the
chip.
Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Micron n25q064 flash supports 4 KiB erase sectors.
Signed-off-by: Alexey Firago <alexey_firago@mentor.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

QUADSPI_MCR_CLR_TXF_MASK is the correct mask for clearing the TX FIFO.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

r852_ecc_correct() reads a 32-bit register into a 16-bit variable,
ecc_reg, but this variable is later used as if it was larger.  This is
reported by clang when building the kernel with many warnings:

    drivers/mtd/nand/r852.c:512:11: error: shift count >= width of type
    [-Werror,-Wshift-count-overflow]
                    ecc_reg >>= 16;
                            ^   ~~
Fix this by making ecc_reg 32-bit, like the return type of
r852_read_reg_dword().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

It is needed for k2l keystone2 EVM which uses NAND flash with 4K page
size, hence add support for 4K page size nand devices.

[Brian: similar work submitted by Murali Karicheri <m-karicheri2@ti.com>
and Hao Zhang <hzhang@ti.com>]
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Commit 66507c7b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER
using the same bit value as the existing NAND_BUSWIDTH_AUTO.

Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Fixes: 66507c7b ("mtd: nand: Add support to use nand_base
	poi databuf as bounce buffer")
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Do not call free_device() in init_nandsim, the caller - ns_init_module -
will take care of that if something goes wrong.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

If allocating ns->nand_pages_slab fails, do not try to destroy it when
cleaning up nandsim resources.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Add myself as maintainer of the NAND based MSystems DiskOnChip G3
driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull late x86 platform driver updates from Darren Hart:
 "The following came in a bit later and I wanted them to bake in next a
  few more days before submitting, thus the second pull.

  A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
  dell-laptop, a couple minor fixes, and some updated documentation in
  the dell-laptop comments.

  intel_pmc_ipc:
   - Add Intel Apollo Lake PMC IPC driver

  tc1100-wmi:
   - Delete an unnecessary check before the function call "kfree"

  dell-laptop:
   - Fix allocating & freeing SMI buffer page
   - Show info about WiGig and UWB in debugfs
   - Update information about wireless control"

* tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver
  tc1100-wmi: Delete an unnecessary check before the function call "kfree"
  dell-laptop: Fix allocating & freeing SMI buffer page
  dell-laptop: Show info about WiGig and UWB in debugfs
  dell-laptop: Update information about wireless control

Pull more vfs updates from Al Viro:
 "Assorted VFS fixes and related cleanups (IMO the most interesting in
  that part are f_path-related things and Eric's descriptor-related
  stuff).  UFS regression fixes (it got broken last cycle).  9P fixes.
  fs-cache series, DAX patches, Jan's file_remove_suid() work"

[ I'd say this is much more than "fixes and related cleanups".  The
  file_table locking rule change by Eric Dumazet is a rather big and
  fundamental update even if the patch isn't huge.   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
  9p: cope with bogus responses from server in p9_client_{read,write}
  p9_client_write(): avoid double p9_free_req()
  9p: forgetting to cancel request on interrupted zero-copy RPC
  dax: bdev_direct_access() may sleep
  block: Add support for DAX reads/writes to block devices
  dax: Use copy_from_iter_nocache
  dax: Add block size note to documentation
  fs/file.c: __fget() and dup2() atomicity rules
  fs/file.c: don't acquire files->file_lock in fd_install()
  fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
  vfs: avoid creation of inode number 0 in get_next_ino
  namei: make set_root_rcu() return void
  make simple_positive() public
  ufs: use dir_pages instead of ufs_dir_pages()
  pagemap.h: move dir_pages() over there
  remove the pointless include of lglock.h
  fs: cleanup slight list_entry abuse
  xfs: Correctly lock inode when removing suid and file capabilities
  fs: Call security_ops->inode_killpriv on truncate
  fs: Provide function telling whether file_remove_privs() will do anything
  ...

Commit 835a6a2f ("Bluetooth: Stop sabotaging list poisoning")
thought that the code was sabotaging the list poisoning when NULL'ing
out the list pointers and removed it.

But what was going on was that the bluetooth code was using NULL
pointers for the list as a way to mark it empty, and that commit just
broke it (and replaced the test with NULL with a "list_empty()" test on
a uninitialized list instead, breaking things even further).

So fix it all up to use the regular and real list_empty() handling
(which does not use NULL, but a pointer to itself), also making sure to
initialize the list properly (the previous NULL case was initialized
implicitly by the session being allocated with kzalloc())

This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong
An.

[ I would normally expect to get this through the bt tree, but I'm going
  to release -rc1, so I'm just committing this directly   - Linus ]
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Original-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Original-by: Marcel Holtmann <marcel@holtmann.org>:
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI target updates from Nicholas Bellinger:
 "It's been a busy development cycle for target-core in a number of
  different areas.

  The fabric API usage for se_node_acl allocation is now within
  target-core code, dropping the external API callers for all fabric
  drivers tree-wide.

  There is a new conversion to RCU hlists for se_node_acl and
  se_portal_group LUN mappings, that turns fast-past LUN lookup into a
  completely lockless code-path.  It also removes the original
  hard-coded limitation of 256 LUNs per fabric endpoint.

  The configfs attributes for backends can now be shared between core
  and driver code, allowing existing drivers to use common code while
  still allowing flexibility for new backend provided attributes.

  The highlights include:

   - Merge sbc_verify_dif_* into common code (sagi)
   - Remove iscsi-target support for obsolete IFMarker/OFMarker
     (Christophe Vu-Brugier)
   - Add bidi support in target/user backend (ilias + vangelis + agover)
   - Move se_node_acl allocation into target-core code (hch)
   - Add crc_t10dif_update common helper (akinobu + mkp)
   - Handle target-core odd SGL mapping for data transfer memory
     (akinobu)
   - Move transport ID handling into target-core (hch)
   - Move task tag into struct se_cmd + support 64-bit tags (bart)
   - Convert se_node_acl->device_list[] to RCU hlist (nab + hch +
     paulmck)
   - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch +
     paulmck)
   - Simplify target backend driver registration (hch)
   - Consolidate + simplify target backend attribute implementations
     (hch + nab)
   - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch)
   - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab)
   - Drop unnecessary core_tpg_register TFO parameter (nab)
   - Use 64-bit LUNs tree-wide (hannes)
   - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits)
  target: Bump core version to v5.0
  target: remove target_core_configfs.h
  target: remove unused TARGET_CORE_CONFIG_ROOT define
  target: consolidate version defines
  target: implement WRITE_SAME with UNMAP bit using ->execute_unmap
  target: simplify UNMAP handling
  target: replace se_cmd->execute_rw with a protocol_data field
  target/user: Fix inconsistent kmap_atomic/kunmap_atomic
  target: Send UA when changing LUN inventory
  target: Send UA upon LUN RESET tmr completion
  target: Send UA on ALUA target port group change
  target: Convert se_lun->lun_deve_lock to normal spinlock
  target: use 'se_dev_entry' when allocating UAs
  target: Remove 'ua_nacl' pointer from se_ua structure
  target_core_alua: Correct UA handling when switching states
  xen-scsiback: Fix compile warning for 64-bit LUN
  target: Remove TARGET_MAX_LUNS_PER_TRANSPORT
  target: use 64-bit LUNs
  target: Drop duplicate + unused se_dev_check_wce
  target: Drop unnecessary core_tpg_register TFO parameter
  ...

Pull NTB updates from Jon Mason:
 "This includes a pretty significant reworking of the NTB core code, but
  has already produced some significant performance improvements.

  An abstraction layer was added to allow the hardware and clients to be
  easily added.  This required rewriting the NTB transport layer for
  this abstraction layer.  This modification will allow future "high
  performance" NTB clients.

  In addition to this change, a number of performance modifications were
  added.  These changes include NUMA enablement, using CPU memcpy
  instead of asyncdma, and modification of NTB layer MTU size"

* tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Add split BAR output for debugfs stats
  NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe
  NTB: Print driver name and version in module init
  NTB: Increase transport MTU to 64k from 16k
  NTB: Rename Intel code names to platform names
  NTB: Default to CPU memcpy for performance
  NTB: Improve performance with write combining
  NTB: Use NUMA memory in Intel driver
  NTB: Use NUMA memory and DMA chan in transport
  NTB: Rate limit ntb_qp_link_work
  NTB: Add tool test client
  NTB: Add ping pong test client
  NTB: Add parameters for Intel SNB B2B addresses
  NTB: Reset transport QP link stats on down
  NTB: Do not advance transport RX on link down
  NTB: Differentiate transport link down messages
  NTB: Check the device ID to set errata flags
  NTB: Enable link for Intel root port mode in probe
  NTB: Read peer info from local SPAD in transport
  NTB: Split ntb_hw_intel and ntb_transport drivers
  ...

if server claims to have written/read more than we'd told it to,
warn and cap the claimed byte count to avoid advancing more than
we are ready to.

Braino in "9p: switch p9_client_write() to passing it struct iov_iter *";
if response is impossible to parse and we discard the request, get the
out of the loop right there.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If we'd already sent a request and decide to abort it, we *must*
issue TFLUSH properly and not just blindly reuse the tag, or
we'll get seriously screwed when response eventually arrives
and we confuse it for response to later request that had reused
the same tag.

Cc: stable@vger.kernel.org # v3.2 and later
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The brd driver is the only in-tree driver that may sleep currently.
After some discussion on linux-fsdevel, we decided that any driver
may choose to sleep in its ->direct_access method.  To ensure that all
callers of bdev_direct_access() are prepared for this, add a call
to might_sleep().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If a block device supports the ->direct_access methods, bypass the normal
DIO path and use DAX to go straight to memcpy() instead of allocating
a DIO and a BIO.

Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in
do_blockdev_direct_IO().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

When userspace does a write, there's no need for the written data to
pollute the CPU cache.  This matches the original XIP code.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

For block devices which are small enough, mkfs will default to creating
a filesystem with block sizes smaller than page size.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull kvm fixes from Paolo Bonzini:
 "Except for the preempt notifiers fix, these are all small bugfixes
  that could have been waited for -rc2.  Sending them now since I was
  taking care of Peter's patch anyway"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: add hyper-v crash msrs values
  KVM: x86: remove data variable from kvm_get_msr_common
  KVM: s390: virtio-ccw: don't overwrite config space values
  KVM: x86: keep track of LVT0 changes under APICv
  KVM: x86: properly restore LVT0
  KVM: x86: make vapics_in_nmi_mode atomic
  sched, preempt_notifier: separate notifier registration from static_key inc/dec

When split BAR is enabled, the driver needs to dump out the split BAR
registers rather than the original 64bit BAR registers.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

The unsafe doorbell and scratchpad access should display reason when
WARN is called.  Otherwise we get a stack dump without any explanation.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Printouts driver name and version to indicate what is being loaded.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Benchmarking showed a significant performance increase with the MTU size
to 64k instead of 16k.  Change the driver default to 64k.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Instead of using the platform code names, use the correct platform names
to identify the respective Intel NTB hardware.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>