- 20 Nov, 2019 5 commits
-
-
Shengjiu Wang authored
This reverts commit 957ce0c6 (ASoC: soc-pcm: check symmetry after hw_params). That commit cause soc_pcm_params_symmetry can't take effect. cpu_dai->rate, cpu_dai->channels and cpu_dai->sample_bits are updated in the middle of soc_pcm_hw_params, so move soc_pcm_params_symmetry to the end of soc_pcm_hw_params is not a good solution, for judgement of symmetry in the function is always true. FIXME: According to the comments of that commit, I think the case described in the commit should disable symmetric_rates in Back-End, rather than changing the position of soc_pcm_params_symmetry. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1573555602-5403-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The RST (reset-gpios) is low active so the driver must handle it accordingly. Add comments to explain clearly how the line is used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191120131753.6831-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Use the standard name for the gpion in DT: reset-gpios Document that the RST line is low active and update the example accordingly. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191120131753.6831-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Tzung-Bi Shih authored
Add SND_SOC_BYTES_E to accept getter and putter. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191120060844.224607-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Jaroslav Kysela authored
This ASCII string can carry additional information about soundcard components or configuration. Add the possibility to set this string via the ASoC card. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191119174933.25526-1-perex@perex.czSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 19 Nov, 2019 2 commits
-
-
Kuninori Morimoto authored
soc-topology adds extra dai_link by using snd_soc_add_dai_link(), and removes it by snd_soc_romove_dai_link(). This snd_soc_add/remove_dai_link() and/or its related functions are unbalanced before, and now, these are balance-uped. But, it finds the random operation issue, and it is reported by Pierre-Louis. When card was released, topology will call snd_soc_remove_dai_link() via (A). static void soc_cleanup_card_resources(struct snd_soc_card *card) { struct snd_soc_dai_link *link, *_link; /* This should be called before snd_card_free() */ (A) soc_remove_link_components(card); /* free the ALSA card at first; this syncs with pending operations */ if (card->snd_card) { (B) snd_card_free(card->snd_card); card->snd_card = NULL; } /* remove and free each DAI */ (X) soc_remove_link_dais(card); for_each_card_links_safe(card, link, _link) (C) snd_soc_remove_dai_link(card, link); ... } At (A), topology calls snd_soc_remove_dai_link(). Then topology rtd, and its related all data are freed. Next, (B) is called, and then, pcm->private_free = soc_pcm_private_free() is called. static void soc_pcm_private_free(struct snd_pcm *pcm) { struct snd_soc_pcm_runtime *rtd = pcm->private_data; /* need to sync the delayed work before releasing resources */ flush_delayed_work(&rtd->delayed_work); snd_soc_pcm_component_free(rtd); } Here, it gets rtd via pcm->private_data. But, topology related rtd are already freed at (A). Normal sound card has no damage, becase it frees rtd at (C). These are finalizing rtd related data. Thus, these should be called when rtd was freed, not sound card was freed. It is very natural and understandable. In other words, pcm->private_free = soc_pcm_private_free() is no longer needed. Extra issue is that there is zero chance to call soc_remove_dai() for topology related dai at (X). Because (A) removes rtd connection from card too, and, (X) is based on card connected rtd. This means, (X) need to be called before (C) (= for normal sound) and (A) (= for topology). Now, I want to focus this patch which is the reason why snd_card_free() = (B) is located there. commit 4efda5f2 ("ASoC: Fix use-after-free at card unregistration") Original snd_card_free() was called last of this function. But moved to top to avoid use-after-free issue. The issue was happen at soc_pcm_free() which was pcm->private_free, today it is updated/renamed to soc_pcm_private_free(). In other words, (B) need to be called before (C) (= for normal sound) and (A) (= for topology), because it needs (not yet freed) rtd. But, (A) need to be called before (B), because it needs card->snd_card pointer. If we call flush_delayed_work() and snd_soc_pcm_component_free() (= same as soc_pcm_private_free()) when rtd was freed (= (C), (A)), there is no reason to call snd_card_free() at top of this function. It can be called end of this function, again. But, in such case, it will likely break unbind again, as Takashi-san reported. When unbind is performed in a busy state, the code may release still-in-use resources. At least we need to call snd_card_disconnect_sync() at the first place. The final code will be... static void soc_cleanup_card_resources(struct snd_soc_card *card) { struct snd_soc_dai_link *link, *_link; if (card->snd_card) (Z) snd_card_disconnect_sync(card->snd_card); (X) soc_remove_link_dais(card); (A) soc_remove_link_components(card); for_each_card_links_safe(card, link, _link) (C) snd_soc_remove_dai_link(card, link); ... if (card->snd_card) { (B) snd_card_free(card->snd_card); card->snd_card = NULL; } } To avoid release still-in-use resources, call snd_card_disconnect_sync() at (Z). (X) is needed for both non-topology and topology. topology removes rtd via (A), and non topology removes rtd via (C). snd_card_free() is no longer related to use-after-free issue. Thus, locating (B) is no problem. Fixes: df95a16d ("ASoC: soc-core: fix RIP warning on card removal") Fixes: bc7a9091 ("ASoC: soc-core: add soc_unbind_dai_link()") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87o8xax88g.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
This patch uses rtd instead of pcm at snd_soc_pcm_component_new/free() parameter. This is prepare for dai_link remove bug fix on topology. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pnhqx89j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Nov, 2019 11 commits
-
-
Li Xu authored
Expose mixer control API for reading and writing controls from the kernel. This API can be used by ALSA kernel drivers with ADSP support to read and write firmware-defined memory regions. Signed-off-by: Li Xu <li.xu@cirrus.com> Signed-off-by: David Rhodes <david.rhodes@cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1573847653-17094-2-git-send-email-david.rhodes@cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lucas Stach authored
The tlv320aic31xx devices allow to adjust the output common-mode voltage for best analog performance. The datasheet states that the common mode voltage should be set to be <= AVDD/2. This changes allows to configure the output common-mode voltage via a DT property. If the property is absent the voltage is automatically chosen as the highest voltage below/equal to AVDD/2. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20191118151207.28576-1-l.stach@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Liam Girdwood authored
The manifest information is different between CNL, CML and CFL platforms hence we need to load different files. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
In case the RST line is connected to a GPIO line it needs to be pulled high when the driver probes to be able to use the codec. Add support also for cases when more than one codec is is controlled by the same GPIO line by requesting the gpio with GPIOD_FLAGS_BIT_NONEXCLUSIVE. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113124734.27984-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
On boards where the RST line is not pulled up, but it is connected to a GPIO line this property must present in order to be able to enable the codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113124734.27984-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Chuhong Yuan authored
The driver forgets to call pm_runtime_disable in remove and probe failure. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191118073707.28298-1-hslester96@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Chuhong Yuan authored
This driver misses calls to pm_runtime_disable and regulator_bulk_disable in remove and a call to free_irq in probe failure. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073633.28237-1-hslester96@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
Qualcomm DSPs also support the flac decoder, so add support for FLAC decoder and convert the snd_dec_flac params to qdsp format. Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191115102705.649976-4-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Qualcomm DSPs expect flac config to be set for flac decoders, so add the API to program the flac config to the DSP Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191115102705.649976-3-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
The current design of sending codec parameters assumes that decoders will have parsers so they can parse the encoded stream for parameters and configure the decoder. But this assumption may not be universally true and we know some DSPs which do not contain the parsers so additional parameters are required to be passed. So add these parameters starting with FLAC decoder. The size of snd_codec_options is still 120 bytes after this change (due to this being a union) Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191115102705.649976-2-vkoul@kernel.orgAcked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
kbuild test robot authored
Fixes: 21c00e5d ("ASoC: rt5677: Enable jack detect while DSP is running") Signed-off-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20191114153304.n4pyix7qadu76tx4@4978f4969bb8Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Nov, 2019 6 commits
-
-
Peter Ujfalusi authored
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113095445.3211-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113095445.3211-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
soc_cleanup_card_resources() will call card->remove(), but it should be called if card->probe() or card->late_probe() are called. snd_soc_bind_card() might be error before calling card->probe() / card->late_probe(). In that time, card->remove() will be called. This patch adds card_probed parameter to judge it. Fixes: bfce78a5 ("ASoC: soc-core: tidyup soc_init_dai_link()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/87o8xg4ltr.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
To makes code readable, this patch moves snd_soc_unbind_card() next to snd_soc_bind_card(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pnhw4lu5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. snd_soc_bind_card() is calling snd_soc_dapm_init() for both card and component. Let's call paired snd_soc_dapm_shutdown() at paired soc_cleanup_card_resources(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22c4lub.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Colin Ian King authored
There is a block that is indented too deeply, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191112190218.282337-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 12 Nov, 2019 16 commits
-
-
Rob Herring authored
'fsia' and 'fsib' property prefixes were added as schema in commit 2f52475b ("ASoC: fsi: switch to yaml base Documentation"). Unfortunately to do checks on actual vendor prefixes, we have to track the handful of prefixes which are not vendors like 'fsia' and 'fsib'. Fixes: 2f52475b ASoC: fsi: switch to yaml base Documentation Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191108153538.11970-1-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
snd_soc_bind_card() is calling many initialize functions for each card / link / dai / aux etc, etc, etc... When error happen, the message is indicated at snd_soc_bind_card(), not at each functions. But, only soc_probe_aux_devices() case is indicating error at functions, not at snd_soc_bind_card(). It is not an issue, but unbalanced. This patch moves error message to snd_soc_bind_card(). Also avoids deep-nested code. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lfsthkw9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
having both soc_bind_card() and snd_soc_instantiate_card() is very confusable. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mud9hkwj.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
having both soc_remove_component() and soc_cleanup_component() is very confusable. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o8xphkwt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
We don't need to separete snd_soc_remove_dai_link() and soc_unbind_dai_link() anymore. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pni5hkx1.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
We don't need to separete snd_soc_add_dai_link() and soc_bind_dai_link() anymore. Let's merge these. One note is that before this patch, it adds list (A) eventhough if it had dai_link->ignore (1), or already bounded dai_link (2). But I guess it is wrong. This patch also solve this issue. /* BEFORE */ int soc_bind_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... } int snd_soc_add_dai_link(...) { ... => ret = soc_bind_dai_link(...); => if (ret < 0) => return ret; (A) list_add_tail(&dai_link->list, &card->dai_link_list); ... } /* AFTER */ int snd_soc_add_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... (A) list_add_tail(&dai_link->list, &card->dai_link_list); return 0; } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22lhkx8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
We don't need to separete snd_soc_unregister_dai() and soc_del_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87sgn1hkxg.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
We don't need to separete snd_soc_register_dai() and soc_add_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tv7hhkxm.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Because complex separeted "card pre-listed component" and "topology added component" duplicated operation is now becoming simple, we don't need to check already bound dai_link which is not exist anymore. This patch removes soc_is_dai_link_bound(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v9rxhkxw.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Dragos Tarcatu authored
The volume and bytes kcontrols are currently not freeing their memory on initialization failures. When an error occurs, all the widgets loaded so far are unloaded via sof_widget_unload(). But this only happens for the widgets that got successfully loaded. Fix that by kfree()-ing the allocated memory on load error. Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222039.19651-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
We should suspend audio to D3 by default, for the sake of power saving, change the condition of D0I3 suspending here to that when there is stream with suspend_ignored specified. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Add helper to check if the DSP should be put in D0i3. This function returns true if a stream has ignored the SUSPEND trigger to keep the pipelines running in the DSP. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Add check before seeting d0_substate and return success if Audio DSP is already in the target substate. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Add Audio DSP state machine with comments. Note that the 'D0<-->runtime D0I3' part is not implemented yet. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
We have platforms such as CFL with no known I2S codec being used, and the ACPI tables are currently empty, so fall-back to using the firmware filename used in nocodec mode Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Due to firmware manifest/signature differences, we have to use different firmware names, so split CNL machine table in three (CNL, CFL, CML). The CFL table is currently empty since all known platforms use HDaudio, but let's plan ahead. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-