- 17 May, 2021 30 commits
-
-
Danielle Ratson authored
Currently, the array of the ports that were split in the port_scale test is local, so the port_cleanup() unsplits an empty array. Make the array global so the cleanup will be preformed properly. Suggested-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yang Shen says: ==================== Rid W=1 warnings in net This is a set to fully clean drivers/net. ==================== Signed-off-by: -
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:121: warning: expecting prototype for hns_mac_is_adjust_link(). Prototype was for hns_mac_need_adjust_link() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:386: warning: expecting prototype for hns_mac_queue_config_bc_en(). Prototype was for hns_mac_port_config_bc_en() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:607: warning: expecting prototype for hns_mac_set_autoneg(). Prototype was for hns_mac_set_pauseparam() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:236: warning: expecting prototype for hns_ppe_qid_cfg(). Prototype was for hns_dsaf_ppe_qid_cfg() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:623: warning: expecting prototype for dsaf_tbl_tcam_mcast_cfg(). Prototype was for hns_dsaf_tbl_tcam_mcast_cfg() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1220: warning: expecting prototype for hns_dsaf_tbl_tcam_init(). Prototype was for hns_dsaf_comm_init() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2121: warning: expecting prototype for dsaf_pfc_unit_cnt(). Prototype was for hns_dsaf_pfc_unit_cnt() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2153: warning: expecting prototype for dsaf_port_work_rate_cfg(). Prototype was for hns_dsaf_port_work_rate_cfg() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2745: warning: expecting prototype for hns_dsaf_get_sset_count(). Prototype was for hns_dsaf_get_regs_count() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2957: warning: expecting prototype for dsaf_probe(). Prototype was for hns_dsaf_probe() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:3011: warning: expecting prototype for dsaf_remove(). Prototype was for hns_dsaf_remove() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:366: warning: expecting prototype for hns_dsaf_srst_chns(). Prototype was for hns_dsaf_srst_chns_acpi() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:509: warning: expecting prototype for hns_mac_get_sds_mode(). Prototype was for hns_mac_get_phy_if() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:303: warning: expecting prototype for ppe_init_hw(). Prototype was for hns_ppe_init_hw() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:350: warning: expecting prototype for ppe_uninit_hw(). Prototype was for hns_ppe_uninit_hw() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:391: warning: expecting prototype for hns_ppe_reset(). Prototype was for hns_ppe_reset_common() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:464: warning: expecting prototype for ppe_get_strings(). Prototype was for hns_ppe_get_strings() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c:920: warning: expecting prototype for rcb_get_sset_count(). Prototype was for hns_rcb_get_ring_regs_count() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c:112: warning: expecting prototype for hns_xgmac_tx_lf_rf_insert(). Prototype was for hns_xgmac_lf_rf_insert() instead drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c:122: warning: expecting prototype for hns_xgmac__lf_rf_control_init(). Prototype was for hns_xgmac_lf_rf_control_init() instead drivers/net/ethernet/hisilicon/hns/hns_enet.c:777: warning: expecting prototype for hns_nic_adp_coalesce(). Prototype was for hns_nic_adpt_coalesce() instead drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Yang Shen <shenyang39@huawei.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/phy/adin.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/phy/rockchip.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/via/via-velocity.c:1908: warning: expecting prototype for tx_srv(). Prototype was for velocity_tx_srv() instead drivers/net/ethernet/via/via-velocity.c:2466: warning: expecting prototype for velocity_get_status(). Prototype was for velocity_get_stats() instead drivers/net/ethernet/via/via-velocity.c:3734: warning: expecting prototype for velocity_cleanup(). Prototype was for velocity_cleanup_module() instead Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/ti/cpsw_ale.c:88: warning: expecting prototype for struct ale_dev_id. Prototype was for struct cpsw_ale_dev_id instead Cc: Cyril Chemparathy <cyril@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/socionext/sni_ave.c:28: warning: expecting prototype for sni_ave.c(). Prototype was for AVE_IDR() instead Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:797: warning: expecting prototype for sxgbe_tx_clean(). Prototype was for sxgbe_tx_all_clean() instead drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1026: warning: expecting prototype for sxgbe_init_tx_coalesce(). Prototype was for sxgbe_tx_init_coalesce() instead Cc: Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c:761: warning: expecting prototype for qlcnic_83xx_idc_cold_state(). Prototype was for qlcnic_83xx_idc_cold_state_handler() instead drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c:192: warning: expecting prototype for qlcnic_83xx_vnic_opmode(). Prototype was for qlcnic_83xx_config_vnic_opmode() instead Cc: Shahed Shaikh <shshaikh@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/netronome/nfp/ccm_mbox.c:52: warning: expecting prototype for struct nfp_ccm_mbox_skb_cb. Prototype was for struct nfp_ccm_mbox_cmsg_cb instead drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c:35: warning: expecting prototype for struct nfp_tun_pre_run_rule. Prototype was for struct nfp_tun_pre_tun_rule instead drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nffw.c:38: warning: expecting prototype for NFFW_INFO_VERSION history(). Prototype was for NFFW_INFO_VERSION_CURRENT() instead Cc: Simon Horman <simon.horman@netronome.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/neterion/vxge/vxge-config.c:4895: warning: expecting prototype for vxge_hw_vpath_rx_doorbell_post(). Prototype was for vxge_hw_vpath_rx_doorbell_init() instead drivers/net/ethernet/neterion/vxge/vxge-main.c:1814: warning: expecting prototype for vxge_poll(). Prototype was for vxge_poll_msix() instead drivers/net/ethernet/neterion/vxge/vxge-main.c:4761: warning: expecting prototype for vxge_rem_nic(). Prototype was for vxge_remove() instead Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/neterion/s2io.c:2759: warning: expecting prototype for s2io_poll(). Prototype was for s2io_poll_msix() instead drivers/net/ethernet/neterion/s2io.c:5304: warning: expecting prototype for s2io_ethtol_get_link_ksettings(). Prototype was for s2io_ethtool_get_link_ksettings() instead Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/microchip/encx24j600.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jon Ringle <jringle@gridpoint.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/micrel/ksz884x.c:2163: warning: expecting prototype for sw_get_board_storm(). Prototype was for sw_get_broad_storm() instead drivers/net/ethernet/micrel/ksz884x.c:2985: warning: expecting prototype for port_w_phy(). Prototype was for hw_w_phy() instead drivers/net/ethernet/micrel/ksz884x.c:4792: warning: expecting prototype for transmit_done(). Prototype was for tx_done() instead Cc: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c:604: warning: expecting prototype for cmdq_arm_ceq_handler(). Prototype was for cmdq_sync_cmd_handler() instead drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:59: warning: expecting prototype for get_capability(). Prototype was for parse_capability() instead drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:101: warning: expecting prototype for get_cap_from_fw(). Prototype was for get_capability() instead drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:355: warning: expecting prototype for clear_io_resource(). Prototype was for clear_io_resources() instead drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:1100: warning: expecting prototype for hinic_hwdev_get_sq(). Prototype was for hinic_hwdev_get_rq() instead drivers/net/ethernet/huawei/hinic/hinic_hw_if.c:341: warning: expecting prototype for dma_attr_table_init(). Prototype was for dma_attr_init() instead drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c:904: warning: expecting prototype for hinic_put_wqe(). Prototype was for hinic_rq_put_wqe() instead drivers/net/ethernet/huawei/hinic/hinic_main.c:241: warning: expecting prototype for create_txqs(). Prototype was for create_rxqs() instead drivers/net/ethernet/huawei/hinic/hinic_main.c:295: warning: expecting prototype for free_txqs(). Prototype was for free_rxqs() instead drivers/net/ethernet/huawei/hinic/hinic_tx.c:667: warning: expecting prototype for free_all_rx_skbs(). Prototype was for free_all_tx_skbs() instead Cc: Bin Luo <luobin9@huawei.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb4vf/sge.c:966: warning: expecting prototype for check_ring_tx_db(). Prototype was for ring_tx_db() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb3/sge.c:677: warning: expecting prototype for free_qset(). Prototype was for t3_free_qset() instead drivers/net/ethernet/chelsio/cxgb3/sge.c:1266: warning: expecting prototype for eth_xmit(). Prototype was for t3_eth_xmit() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb3/sge.c:677: warning: expecting prototype for free_qset(). Prototype was for t3_free_qset() instead drivers/net/ethernet/chelsio/cxgb3/sge.c:1266: warning: expecting prototype for eth_xmit(). Prototype was for t3_eth_xmit() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/calxeda/xgmac.c:720: warning: expecting prototype for init_xgmac_dma_desc_rings(). Prototype was for xgmac_dma_desc_rings_init() instead drivers/net/ethernet/calxeda/xgmac.c:867: warning: expecting prototype for xgmac_tx(). Prototype was for xgmac_tx_complete() instead drivers/net/ethernet/calxeda/xgmac.c:1049: warning: expecting prototype for xgmac_release(). Prototype was for xgmac_stop() instead drivers/net/ethernet/calxeda/xgmac.c:1822: warning: expecting prototype for xgmac_dvr_remove(). Prototype was for xgmac_remove() instead Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/cadence/macb_pci.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/ethernet/cadence/macb_ptp.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/brocade/bna/bfa_cee.c:91: warning: expecting prototype for bfa_cee_get_attr_isr(). Prototype was for bfa_cee_get_stats_isr() instead Cc: Rasesh Mody <rmody@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13595: warning: expecting prototype for bnx2x_get_num_none_def_sbs(). Prototype was for bnx2x_get_num_non_def_sbs() instead drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:4165: warning: expecting prototype for atomic_add_ifless(). Prototype was for __atomic_add_ifless() instead drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:4193: warning: expecting prototype for atomic_dec_ifmoe(). Prototype was for __atomic_dec_ifmoe() instead Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: GR-everest-linux-l2@marvell.com Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/atheros/atlx/atl1.c:1020: warning: expecting prototype for atl1_setup_mem_resources(). Prototype was for atl1_setup_ring_resources() instead Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/atheros/atl1e/atl1e_main.c:367: warning: expecting prototype for atl1e_set_mac(). Prototype was for atl1e_set_mac_addr() instead drivers/net/ethernet/atheros/atl1e/atl1e_main.c:796: warning: expecting prototype for atl1e_setup_mem_resources(). Prototype was for atl1e_setup_ring_resources() instead Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/atheros/atl1c/atl1c_main.c:442: warning: expecting prototype for atl1c_set_mac(). Prototype was for atl1c_set_mac_addr() instead drivers/net/ethernet/atheros/atl1c/atl1c_main.c:969: warning: expecting prototype for atl1c_setup_mem_resources(). Prototype was for atl1c_setup_ring_resources() instead drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1375: warning: expecting prototype for atl1c_configure(). Prototype was for atl1c_configure_mac() instead Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Yang Shen authored
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/arc/emac_rockchip.c:18: warning: expecting prototype for emac(). Prototype was for DRV_NAME() instead Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Heiner Kallweit authored
Remove own module name definition and use KBUILD_MODNAME instead. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Seth David Schoen says: ==================== Treat IPv4 lowest address as ordinary unicast address Treat the lowest address in a subnet (the address within the subnet which contains all 0 bits) as an ordinary unicast address instead of as a potential second broadcast address. For example, in subnet 192.168.17.24/29, which contains 8 addresses, make address 192.168.17.24 usable as a normal unicast address (while continuing to support 192.168.17.31 as a broadcast address). Since EVERY network number or subnet formerly had its host number 0 reserved, this patchset adds 1 more usable host address to every network and subnet (i.e., 2^(32-n)-1 instead of 2^(32-n)-2 addresses available for assignment on each IPv4 /n subnet). For small subnets, this is a significant gain; instead of 6 usable host addresses, a /29 would now contain 7, a 16% increase. The reserving of host number 0 for broadcast came about in RFC 1122 from 1989 (page 31, "IP addresses are not permitted to have the value 0 or -1 for any of the <Host-number>, <Network-number>, or <Subnet-number> fields (except in the special cases listed above)" and page 66, "There is a class of hosts [4.2BSD Unix and its derivatives, but not 4.3BSD] that use non-standard broadcast address forms, substituting 0 for -1. All hosts SHOULD recognize and accept any of these non-standard broadcast addresses as the destination address of an incoming datagram."). This has been repeated in subsequent RFCs, always with backwards-compatibility rationales. Network troubles (broadcast storms) ensued when some early hosts on a LAN treated the lowest address as unicast and others treated it as broadcast. Multiple 1989 changes to IP successfully prevented these. The key was adding the layering violation rule requiring hosts to ignore all IP datagrams with unicast destination addresses that were received in low-level (Ethernet) broadcasts. That change is still in effect, and this patchset does not alter it. All operating systems since 4.3BSD, including all the current BSD OSes, now use the standard IP broadcast address. 4.2BSD has been obsolete for more than 30 years, and all modern hosts ignore hardware broadcasts containing unicast IP addresses, so there is no modern likelihood of broadcast storms even when hosts disagree on the unicast vs. broadcast status of a given address. Tests with this patchset show that other Linux hosts on the local segment simply ignore a host numbered with the lowest address, both for incoming and outgoing packet purposes. They don't interoperate with it, but they also don't cause broadcast storms or any other malfunction. If patched, they have no trouble interoperating with a host at the lowest address. Unmodified "distant" hosts that are not on the same segment successfully interoperate, as long as the gateway on the local segment, and the local host itself using the lowest address, have this patch. (Distant hosts have no way of knowing whether a given address is the lowest address in a faraway network segment, so they treat it no differently than any other unicast address.) This means that each local site can change this behavior locally, resulting immediately in global interoperability with the newly usable lowest local address. Modern software and documentation continues to use the definition of the directed, or "net-directed", broadcast address as "a host ID of all one bits". The Internet no longer gets any benefit from having two different broadcast addresses usable on every Ethernet segment. I have not been able to find any documentation that suggests that users or software should ever intentionally use the all-zero form, or that justifies it other than as a historic Berkeleyism. RFCs 1112, 1812, and 3021 state that hosts and routers need to maintain compatibility with the old form -- but they give no rationale other than the past existence of the 4.2BSD behavior. We're happy to provide more historical details or information about behavior of other systems in this regard by e-mail or as future patches to kernel documentation files. ==================== Signed-off-by: -
Seth David Schoen authored
Expect the lowest IPv4 address in a subnet to be assignable and addressable as a unicast (non-broadcast) address on a local network segment. Signed-off-by:
Seth David Schoen <schoen@loyalty.org> Suggested-by:
John Gilmore <gnu@toad.com> Acked-by:
Dave Taht <dave.taht@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Seth David Schoen authored
Treat only the highest, not the lowest, IPv4 address within a local subnet as a broadcast address. Signed-off-by:
-
- 14 May, 2021 10 commits
-
-
Ansuel Smith authored
With the use of the qca8k dsa driver, some problem arised related to port status detection. With a load on a specific port (for example a simple speed test), the driver starts to behave in a strange way and garbage data is produced. To address this, enlarge the sleep delay and address a bug for the reg offset 31 that require additional delay for this specific reg. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ansuel Smith authored
mdio drivers should not use REGCHACHE. Also disable locking since it's handled by the mdio users and regmap is always accessed atomically. Signed-off-by:
-
Ansuel Smith authored
Fix mixed whitespace and tab for define spacing. Signed-off-by:
-
David S. Miller authored
Ansuel Smith says: ==================== Multiple improvement to qca8k stability Currently qca8337 switch are widely used on ipq8064 based router. On these particular router it was notice a very unstable switch with port not link detected as link with unknown speed, port dropping randomly and general unreliability. Lots of testing and comparison between this dsa driver and the original qsdk driver showed lack of some additional delay and values. A main difference arised from the original driver and the dsa one. The original driver didn't use MASTER regs to read phy status and the dedicated mdio driver worked correctly. Now that the dsa driver actually use these regs, it was found that these special read/write operation required mutual exclusion to normal qca8k_read/write operation. The add of mutex for these operation fixed the random port dropping and now only the actual linked port randomly dropped. Adding additional delay for set_page operation and fixing a bug in the mdio dedicated driver fixed also this problem. The current driver requires also more time to apply vlan switch. All of these changes and tweak permit a now very stable and reliable dsa driver and 0 port dropping. This series is currently tested by at least 5 user with different routers and all reports positive results and no problems. Changes v6: - Fix spelling mistake - Change ms to ns (confirmed by datasheet) Changes v5: - Removed mdio patch (sent separetly to try to reduce the series) I know it was asked to reduced this series since it big, but rework the new changes to skip and error check looks wrong. Since half of them are actually already reviewed I think it's better to keep this series as is. - Improve rgmii configurable patch - Move qca8k phy dedicated driver to at803x phy driver - Add support for dedicated internal mdio driver for qca8k Changes v4: - Use iopoll for busy_wait function - Better describe and split some confusing commits - Fix bad rgmii delay configurable patch - Drop phy generic patch to pass flags with phylink_connect_phy - Add dsa2 patch to declare mdio node in the switch node - Add dsa patch to permit dsa driver to declare custom get_phys_mii_mask Some background about the last 2 patch. The qca8k switch doesn't have a 1:1 map between port reg and phy reg. Currently it's used a function to convert port to the internal phy reg. I added some patch to fix this. - The dsa driver now check if the mdio node is present and use the of variant of the mdiobus_register - A custom phy_mii_mask is required as currently the mask is generated from the port reg, but in our case the mask would be different as it should be generated from the phy reg. To generalize this I added an extra function that driver can provide to pass custom phy_mii_mask. Changes v3: - Revert mdio writel changes (use regmap with REGCACHE disabled) - Split propagate error patch to 4 different patch Changes v2: - Implemented phy driver for internal PHYs I'm testing cable test functions as I found some documentation that actually declare regs about it. Problem is that it doesn't actually work. It seems that the value set are ignored by the phy. - Made the rgmii delay configurable - Reordered patch - Split mdio patches to more specific ones - Reworked mdio driver to use readl/writel instead of regmap - Reworked the entire driver to make it aware of any read/write error. - Added phy generic patch to pass flags with phylink_connect_phy function ==================== Signed-off-by: -
Ansuel Smith authored
Since the at803x share the same regs, it's assumed they are based on the same implementation. Make it part of the at803x PHY driver to skip having redudant code. Add initial support for qca8k internal PHYs. The internal PHYs requires special mmd and debug values to be set based on the switch revision passwd using the dev_flags. Supports output of idle, receive and eee_wake errors stats. Some debug values sets can't be translated as the documentation lacks any reference about them. Signed-off-by:
-
Ansuel Smith authored
Clean any whitespace errors and fix not aligned define. Signed-off-by:
-
Ansuel Smith authored
Define get_phy_flags to pass switch_Revision needed to tweak the internal PHY with debug values based on the revision. Signed-off-by:
-
Ansuel Smith authored
Improve the internal mdio read/write bus access by caching the value without accessing it for every read/write. Signed-off-by:
-
Ansuel Smith authored
Document new way of declare mapping of internal PHY to port. The new implementation directly declare the PHY connected to the port by adding a node in the switch node. The driver detect this and register an internal mdiobus using the mapping defined in the mdio node. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ansuel Smith authored
Add support to setup_mdio_bus for internal phy declaration. Introduce a flag to use the legacy port phy mapping by default and use the direct mapping if a mdio node is detected in the switch node. Register a dedicated mdio internal mdio bus to address the different mapping between port and phy if the mdio node is detected. Signed-off-by:
-
