Pull HSI update from Sebastian Reichel:

 - modernize IDA API

* tag 'hsi-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi: Remove usage of the deprecated ida_simple_xx() API

Pull mailbox updates from Jassi Brar:

 - add CMDQ support for mediatek mt8188

 - mhuv2: fix channel window status

 - qcom: document X1E80100 IPC controller and misc cleanup

 - add Versal bindings to xlnx

 - Convert to platform remove callback returning void

* tag 'mailbox-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
  mailbox: mtk-cmdq: Add CMDQ driver support for mt8188
  mailbox: mtk-cmdq: Sort cmdq platform data by compatible name
  mailbox: mtk-cmdq: Rename gce_plat variable with SoC name postfix
  dt-bindings: mailbox: qcom-ipcc: document the X1E80100 Inter-Processor Communication Controller
  mailbox: zynqmp-ipi: Convert to platform remove callback returning void
  mailbox: tegra-hsp: Convert to platform remove callback returning void
  mailbox: sun6i-msgbox: Convert to platform remove callback returning void
  mailbox: stm32-ipcc: Convert to platform remove callback returning void
  mailbox: qcom-ipcc: Convert to platform remove callback returning void
  mailbox: qcom-apcs-ipc: Convert to platform remove callback returning void
  mailbox: omap: Convert to platform remove callback returning void
  mailbox: mtk-cmdq: Convert to platform remove callback returning void
  mailbox: mailbox-test: Convert to platform remove callback returning void
  mailbox: imx: Convert to platform remove callback returning void
  mailbox: bcm-pdc: Convert to platform remove callback returning void
  mailbox: bcm-flexrm: Convert to platform remove callback returning void
  mailbox: zynqmp-ipi: fix an Excess struct member kernel-doc warning
  dt-bindings: mailbox: add Versal IPI bindings
  dt-bindings: mailbox: zynqmp: extend required list
  mailbox: arm_mhuv2: Fix a bug for mhuv2_sender_interrupt
  ...

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Allwinner A100 RGB LED controller
   - Add support for Maxim 5970 Dual Hot-swap controller

  New Device Support:
   - Add support for AW20108 to Awinic LED driver

  New Functionality:
   - Extend support for Net speeds to include; 2.5G, 5G and 10G
   - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
     via sysfs if required
   - Add support for hardware control in AW200xx

  Fix-ups:
   - Use safer methods for string handling
   - Improve error handling; return proper error values, simplify,
     avoid duplicates, etc
   - Replace Mutex use with the Completion mechanism
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Use generic platform device properties
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree binding adaptions/conversions/creation
   - Continue work to remove superfluous platform .remove() call-backs
   - Remove superfluous/defunct code
   - Trivial; whitespace, unused variables, spelling, clean-ups, etc
   - Avoid unnecessary duplicate locks

  Bug Fixes:
   - Repair Kconfig based dependency lists
   - Ensure unused dynamically allocated data is freed after use
   - Fix support for brightness control
   - Add missing sufficient delays during reset to ensure correct
     operation
   - Avoid division-by-zero issues"

* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
  leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
  leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  leds: sun50i-a100: Convert to be agnostic to property provider
  leds: max5970: Add missing headers
  leds: max5970: Make use of dev_err_probe()
  leds: max5970: Make use of device properties
  leds: max5970: Remove unused variable
  leds: rgb: Drop obsolete dependency on COMPILE_TEST
  leds: sun50i-a100: Avoid division-by-zero warning
  leds: trigger: Remove unused function led_trigger_rename_static()
  leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
  leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
  dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
  dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
  dt-bindings: leds: awinic,aw200xx: Add AW20108 device
  leds: aw200xx: Add support for aw20108 device
  leds: aw200xx: Improve autodim calculation method
  leds: aw200xx: Enable disable_locking flag in regmap config
  leds: aw200xx: Add delay after software reset
  dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
  ...

Pull mfd updates from Lee Jones:
 "New Device Support:
   - Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC

  Fix-ups:
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree binding adaptions/conversions/creation
   - Improve error handling; return proper error values, simplify,
     avoid duplicates, etc
   - Continue work to remove superfluous platform .remove() call-backs
   - Move some exported symbols into private namespaces
   - Clean-up and staticify PM related operations
   - Trivial; spelling, whitespace, clean-ups, etc
   - Fix include lists; alphabetise, remove unused, explicitly add used

  Bug Fixes:
   - Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can
     co-exist
   - Ensure debugfs register view is correctly presented
   - Fix ordering and value issues in current use of
     clk_register_fractional_divider()
   - Repair Kconfig based dependency lists"

* tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
  mfd: ti_am335x_tscadc: Fix TI SoC dependencies
  dt-bindings: mfd: sprd: Add support for UMS9620
  mfd: ab8500-sysctrl: Drop ancient charger
  mfd: intel-lpss: Fix the fractional clock divider flags
  mfd: tps6594: Add null pointer check to tps6594_device_init()
  dt-bindings: mfd: pm8008: Clean up example node names
  dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example
  dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding
  dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference
  mfd: da9062: Simplify obtaining I2C match data
  mfd: syscon: Fix null pointer dereference in of_syscon_register()
  mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors()
  mfd: twl6030-irq: Revert to use of_match_device()
  mfd: cs42l43: Correct order of include files to be alphabetical
  mfd: cs42l43: Correct SoundWire port list
  mfd: Fix a few spelling mistakes in PMIC header file comments
  mfd: intel-lpss: Provide Intel LPSS PM ops structure
  mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace
  mfd: intel-lpss: Adjust header inclusions
  mfd: intel-lpss: Use device_get_match_data()
  ...

Pull hwspinlock updates from Bjorn Andersson:

 - Correct kernel-doc through the hwspinlock core, to address build
   warnings (and improve the documentation)

 - Drop unused compatible in the Qualcomm TCSR mutex driver

* tag 'hwlock-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock/core: fix kernel-doc warnings
  hwspinlock: qcom: Remove IPQ6018 SOC specific compatible

Pull remoteproc updates from Bjorn Andersson:

 - The i.MX DSP remoteproc driver adds support for providing a resource
   table, in order to enable IPC with the core

 - The TI K3 DSP driver is transitioned to remove_new, error messages
   are changed to use symbolic error codes, and dev_err_probe() is used
   where applicable

 - Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
   are added to the Qualcomm TrustZone based remoteproc driver

* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
  dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
  dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
  remoteproc: k3-dsp: Convert to platform remove callback returning void
  remoteproc: k3-dsp: Use symbolic error codes in error messages
  remoteproc: k3-dsp: Suppress duplicate error message in .remove()
  arm64: dts: imx8mp: Add reserve-memory nodes for DSP
  remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op

Pull rpmsg updates from Bjorn Andersson:
 "This make virtio free driver_override upon removal. It also updates
  the rpmsg documentation after earlier API updates"

* tag 'rpmsg-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: virtio: Free driver_override when rpmsg_remove()
  doc: rmpsg: Update with rpmsg_endpoint

Pull drm fixes from Dave Airlie:
 "This is just a wrap up of fixes from the last few days. It has the
  proper fix to the i915/xe collision, we can clean up what you did
  later once rc1 lands.

  Otherwise it's a few other i915, a v3d, rockchip and a nouveau fix to
  make GSP load on some original Turing GPUs.

  i915:
   - Fixes for kernel-doc warnings enforced in linux-next
   - Another build warning fix for string formatting of intel_wakeref_t
   - Display fixes for DP DSC BPC and C20 PLL state verification

  v3d:
   - register readout fix

  rockchip:
   - two build warning fixes

  nouveau:
   - fix GSP loading on Turing with different nvdec configuration"

* tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm:
  nouveau/gsp: handle engines in runl without nonstall interrupts.
  drm/i915/perf: reconcile Excess struct member kernel-doc warnings
  drm/i915/guc: reconcile Excess struct member kernel-doc warnings
  drm/i915/gt: reconcile Excess struct member kernel-doc warnings
  drm/i915/gem: reconcile Excess struct member kernel-doc warnings
  drm/i915/dp: Fix the max DSC bpc supported by source
  drm/i915: don't make assumptions about intel_wakeref_t type
  drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors
  drm/i915/display: Fix C20 pll selection for state verification
  drm/v3d: Fix support for register debugging on the RPi 4
  drm/rockchip: vop2: Drop unused if_dclk_rate variable
  drm/rockchip: vop2: Drop superfluous include

Pull more thermal control updates from Rafael Wysocki:
 "These add support for debugfs-based diagnostics to the thermal core,
  simplify the thermal netlink API, fix system-wide PM support in the
  Intel HFI driver and clean up some code.

  Specifics:

   - Add debugfs-based diagnostics support to the thermal core (Daniel
     Lezcano, Dan Carpenter)

   - Fix a power allocator thermal governor issue preventing it from
     resetting cooling devices sometimes (Di Shen)

   - Simplify the thermal netlink API and clean up related code (Rafael
     J. Wysocki)

   - Make the Intel HFI driver support hibernation and deep suspend
     properly (Ricardo Neri)"

* tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
  thermal: intel: hfi: Add syscore callbacks for system-wide PM
  thermal: gov_power_allocator: avoid inability to reset a cdev
  thermal: helpers: Rearrange thermal_cdev_set_cur_state()
  thermal: netlink: Rework notify API for cooling devices
  thermal: core: Use kstrdup_const() during cooling device registration
  thermal/debugfs: Add thermal debugfs information for mitigation episodes
  thermal/debugfs: Add thermal cooling device debugfs information
  thermal: netlink: Pass thermal zone pointer to notify routines
  thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
  thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
  thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()

Pull more ACPI updates from Rafael Wysocki:
 "These add support for new MADT flags to ACPICA, constify the PNP bus
  type structure and add new ACPI IRQ management quirks.

  Specifics:

   - Make pnp_bus_type const (Greg Kroah-Hartman)

   - Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and
     ASUS Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev)

   - Add new MADT GICC/GICR/ITS non-coherent flags and GICC online
     capable bit handling to ACPICA (Lorenzo Pieralisi)"

* tag 'acpi-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
  ACPICA: MADT: Add GICC online capable bit handling
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
  ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB
  PNP: make pnp_bus_type const

Pull more power management updates from Rafael Wysocki:
 "These restore the asynchronous device resume optimization removed by
  the previous PM merge, make the intel_pstate driver work better on
  Meteor Lake systems, optimize the PM QoS core code slightly and fix up
  typos in admin-guide.

  Specifics:

   - Restore the system-wide asynchronous device resume optimization
     removed by a recent concurrency fix (Rafael J. Wysocki)

   - Make the intel_pstate cpufreq driver allow Meteor Lake systems to
     run at somewhat higher frequencies (Srinivas Pandruvada)

   - Make the PM QoS core code use kcalloc() for array allocation (Erick
     Archer)

   - Fix two PM-related typos in admin-guide (Erwan Velu)"

* tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: sleep: Restore asynchronous device resume optimization
  Documentation: admin-guide: PM: Fix two typos
  cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
  PM: QoS: Use kcalloc() instead of kzalloc()

Pull xen updates from Juergen Gross:

 - update some Xen PV interface related headers

 - fix some kernel-doc comments in the xenbus driver

 - fix the Xen gntdev driver to not access the struct page of pages
   imported from a DMA-buf

* tag 'for-linus-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: Fix the abuse of underlying struct page in DMA-buf import
  xen/xenbus: client: fix kernel-doc comments
  xen: update PV-device interface headers

Pull kvm updates from Paolo Bonzini:
 "Generic:

   - Use memdup_array_user() to harden against overflow.

   - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
     architectures.

   - Clean up Kconfigs that all KVM architectures were selecting

   - New functionality around "guest_memfd", a new userspace API that
     creates an anonymous file and returns a file descriptor that refers
     to it. guest_memfd files are bound to their owning virtual machine,
     cannot be mapped, read, or written by userspace, and cannot be
     resized. guest_memfd files do however support PUNCH_HOLE, which can
     be used to switch a memory area between guest_memfd and regular
     anonymous memory.

   - New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
     per-page attributes for a given page of guest memory; right now the
     only attribute is whether the guest expects to access memory via
     guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
     TDX or ARM64 pKVM is checked by firmware or hypervisor that
     guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
     the case of pKVM).

  x86:

   - Support for "software-protected VMs" that can use the new
     guest_memfd and page attributes infrastructure. This is mostly
     useful for testing, since there is no pKVM-like infrastructure to
     provide a meaningfully reduced TCB.

   - Fix a relatively benign off-by-one error when splitting huge pages
     during CLEAR_DIRTY_LOG.

   - Fix a bug where KVM could incorrectly test-and-clear dirty bits in
     non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
     a non-huge SPTE.

   - Use more generic lockdep assertions in paths that don't actually
     care about whether the caller is a reader or a writer.

   - let Xen guests opt out of having PV clock reported as "based on a
     stable TSC", because some of them don't expect the "TSC stable" bit
     (added to the pvclock ABI by KVM, but never set by Xen) to be set.

   - Revert a bogus, made-up nested SVM consistency check for
     TLB_CONTROL.

   - Advertise flush-by-ASID support for nSVM unconditionally, as KVM
     always flushes on nested transitions, i.e. always satisfies flush
     requests. This allows running bleeding edge versions of VMware
     Workstation on top of KVM.

   - Sanity check that the CPU supports flush-by-ASID when enabling SEV
     support.

   - On AMD machines with vNMI, always rely on hardware instead of
     intercepting IRET in some cases to detect unmasking of NMIs

   - Support for virtualizing Linear Address Masking (LAM)

   - Fix a variety of vPMU bugs where KVM fail to stop/reset counters
     and other state prior to refreshing the vPMU model.

   - Fix a double-overflow PMU bug by tracking emulated counter events
     using a dedicated field instead of snapshotting the "previous"
     counter. If the hardware PMC count triggers overflow that is
     recognized in the same VM-Exit that KVM manually bumps an event
     count, KVM would pend PMIs for both the hardware-triggered overflow
     and for KVM-triggered overflow.

   - Turn off KVM_WERROR by default for all configs so that it's not
     inadvertantly enabled by non-KVM developers, which can be
     problematic for subsystems that require no regressions for W=1
     builds.

   - Advertise all of the host-supported CPUID bits that enumerate
     IA32_SPEC_CTRL "features".

   - Don't force a masterclock update when a vCPU synchronizes to the
     current TSC generation, as updating the masterclock can cause
     kvmclock's time to "jump" unexpectedly, e.g. when userspace
     hotplugs a pre-created vCPU.

   - Use RIP-relative address to read kvm_rebooting in the VM-Enter
     fault paths, partly as a super minor optimization, but mostly to
     make KVM play nice with position independent executable builds.

   - Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
     CONFIG_HYPERV as a minor optimization, and to self-document the
     code.

   - Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
     "emulation" at build time.

  ARM64:

   - LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
     granule sizes. Branch shared with the arm64 tree.

   - Large Fine-Grained Trap rework, bringing some sanity to the
     feature, although there is more to come. This comes with a prefix
     branch shared with the arm64 tree.

   - Some additional Nested Virtualization groundwork, mostly
     introducing the NV2 VNCR support and retargetting the NV support to
     that version of the architecture.

   - A small set of vgic fixes and associated cleanups.

  Loongarch:

   - Optimization for memslot hugepage checking

   - Cleanup and fix some HW/SW timer issues

   - Add LSX/LASX (128bit/256bit SIMD) support

  RISC-V:

   - KVM_GET_REG_LIST improvement for vector registers

   - Generate ISA extension reg_list using macros in get-reg-list
     selftest

   - Support for reporting steal time along with selftest

  s390:

   - Bugfixes

  Selftests:

   - Fix an annoying goof where the NX hugepage test prints out garbage
     instead of the magic token needed to run the test.

   - Fix build errors when a header is delete/moved due to a missing
     flag in the Makefile.

   - Detect if KVM bugged/killed a selftest's VM and print out a helpful
     message instead of complaining that a random ioctl() failed.

   - Annotate the guest printf/assert helpers with __printf(), and fix
     the various bugs that were lurking due to lack of said annotation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
  x86/kvm: Do not try to disable kvmclock if it was not enabled
  KVM: x86: add missing "depends on KVM"
  KVM: fix direction of dependency on MMU notifiers
  KVM: introduce CONFIG_KVM_COMMON
  KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
  KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
  RISC-V: KVM: selftests: Add get-reg-list test for STA registers
  RISC-V: KVM: selftests: Add steal_time test support
  RISC-V: KVM: selftests: Add guest_sbi_probe_extension
  RISC-V: KVM: selftests: Move sbi_ecall to processor.c
  RISC-V: KVM: Implement SBI STA extension
  RISC-V: KVM: Add support for SBI STA registers
  RISC-V: KVM: Add support for SBI extension registers
  RISC-V: KVM: Add SBI STA info to vcpu_arch
  RISC-V: KVM: Add steal-update vcpu request
  RISC-V: KVM: Add SBI STA extension skeleton
  RISC-V: paravirt: Implement steal-time support
  RISC-V: Add SBI STA extension definitions
  RISC-V: paravirt: Add skeleton for pv-time support
  RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
  ...

Pull documentation fixes from Jonathan Corbet:
 "A handful of late-arriving documentation fixes"

* tag 'docs-6.8-2' of git://git.lwn.net/linux:
  docs, kprobes: Add loongarch as supported architecture
  docs, kprobes: Update email address of Masami Hiramatsu
  docs: admin-guide: hw_random: update rng-tools website
  Documentation/core-api: fix spelling mistake in workqueue
  docs: kernel_feat.py: fix potential command injection
  Documentation: constrain alabaster package to older versions

Pull parisc updates from Helge Deller:
 "Two small fixes for the parisc architecture:

   - Fix PDC address calculation with narrow firmware (64-bit kernel on
     32-bit firmware)

   - Fix kthread which checks power button get started on qemu too"

* tag 'parisc-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/power: Fix power soft-off button emulation on qemu
  parisc/firmware: Fix F-extend for PDC addresses

Pull Xtensa updates from Max Filippov:

 - small cleanups in the xtensa PCI and asmmacro code

 - fix kernel build with FDPIC toolchain

* tag 'xtensa-20240117' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: don't produce FDPIC output with fdpic toolchain
  xtensa: Use PCI_HEADER_TYPE_MFD instead of literal
  xtensa: replace <asm-generic/export.h> with <linux/export.h>
  xtensa: fix variants path in the Kconfig help

Pull ARM updates from Russell King:

 - add missing neon instructions for the neon support hook

 - arrange for davinci to select PINCTRL

 - try VMA lock-base page fault handling first

 - use memblock_alloc_try_nid_raw() for kasan shadow page

 - dma: use kvzalloc() rather than kzalloc()/vzalloc()

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9331/1: ARM/dma-mapping: replace kzalloc() and vzalloc() with kvzalloc()
  ARM: 9329/1: kasan: Use memblock_alloc_try_nid_raw for shadow page
  ARM: 9328/1: mm: try VMA lock-based page fault handling first
  ARM: 9330/1: davinci: also select PINCTRL
  ARM: 9327/1: vfp: Add missing VFP instructions to neon_support_hook

Pull microblaze updates from Michal Simek:
 "Just defconfig updates:

   - enable NFS, Marvell phy

   - sync defconfig with the latest Kconfig layout"

* tag 'microblaze-v6.8' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: defconfig: Enable the Marvell phy driver
  microblaze: Enable options to mount a rootfs via NFS
  microblaze: Align defconfig with latest Kconfig layout

Pull MIPS updates from Thomas Bogendoerfer:
 "Just cleanups and fixes"

* tag 'mips_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()
  MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()
  MIPS: Fix typos
  MIPS: Remove unused shadow GPR support from vector irq setup
  MIPS: Allow vectored interrupt handler to reside everywhere for 64bit
  mips: Set dump-stack arch description
  mips: mm: add slab availability checking in ioremap_prot
  mips: Optimize max_mapnr init procedure
  mips: Fix max_mapnr being uninitialized on early stages
  mips: Fix incorrect max_low_pfn adjustment
  mips: dmi: Fix early remap on MIPS32
  MIPS: compressed: Use correct instruction for 64 bit code
  MIPS: SGI-IP27: hubio: fix nasid kernel-doc warning
  MAINTAINERS: Add myself as maintainer of the Ralink architecture

Pull RISC-V updates from Palmer Dabbelt:

 - Support for many new extensions in hwprobe, along with a handful of
   cleanups

 - Various cleanups to our page table handling code, so we alwayse use
   {READ,WRITE}_ONCE

 - Support for the which-cpus flavor of hwprobe

 - Support for XIP kernels has been resurrected

* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  riscv: hwprobe: export Zicond extension
  riscv: hwprobe: export Zacas ISA extension
  riscv: add ISA extension parsing for Zacas
  dt-bindings: riscv: add Zacas ISA extension description
  riscv: hwprobe: export Ztso ISA extension
  riscv: add ISA extension parsing for Ztso
  use linux/export.h rather than asm-generic/export.h
  riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
  riscv; fix __user annotation in save_v_state()
  riscv: fix __user annotation in traps_misaligned.c
  riscv: Select ARCH_WANTS_NO_INSTR
  riscv: Remove obsolete rv32_defconfig file
  riscv: Allow disabling of BUILTIN_DTB for XIP
  riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
  riscv: Make XIP bootable again
  riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
  riscv: Fix module_alloc() that did not reset the linear mapping permissions
  riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
  riscv: Check if the code to patch lies in the exit section
  riscv: Use the same CPU operations for all CPUs
  ...

Pull UML updates from Richard Weinberger:

 - Clang coverage support

 - Many cleanups from Benjamin Berg

 - Various minor fixes

* tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  um: Mark 32bit syscall helpers as clobbering memory
  um: Remove unused register save/restore functions
  um: Rely on PTRACE_SETREGSET to set FS/GS base registers
  Documentation: kunit: Add clang UML coverage example
  arch: um: Add Clang coverage support
  um: time-travel: fix time corruption
  um: net: Fix return type of uml_net_start_xmit()
  um: Always inline stub functions
  um: Do not use printk in userspace trampoline
  um: Reap winch thread if it fails
  um: Do not use printk in SIGWINCH helper thread
  um: Don't use vfprintf() for os_info()
  um: Make errors to stop ptraced child fatal during startup
  um: Drop NULL check from start_userspace
  um: Drop support for hosts without SYSEMU_SINGLESTEP support
  um: document arch_futex_atomic_op_inuser
  um: mmu: remove stub_pages
  um: Fix naming clash between UML and scheduler
  um: virt-pci: fix platform map offset

Pull UBI and UBIFS updates from Richard Weinberger:
 "UBI:
   - Use in-tree fault injection framework and add new injection types
   - Fix for a memory leak in the block driver

  UBIFS:
   - kernel-doc fixes
   - Various minor fixes"

* tag 'ubifs-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: block: fix memleak in ubiblock_create()
  ubifs: fix kernel-doc warnings
  mtd: Add several functions to the fail_function list
  ubi: Reserve sufficient buffer length for the input mask
  ubi: Add six fault injection type for testing
  ubi: Split io_failures into write_failure and erase_failure
  ubi: Use the fault injection framework to enhance the fault injection capability
  ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
  ubifs: Check @c->dirty_[n|p]n_cnt and @c->nroot state under @c->lp_mutex
  ubifs: describe function parameters
  ubifs: auth.c: fix kernel-doc function prototype warning
  ubifs: use crypto_shash_tfm_digest() in ubifs_hmac_wkm()

Pull fscrypt fix from Eric Biggers:
 "Fix a bug in my change to how f2fs frees its superblock info (which
  was part of changing the timing of fscrypt keyring destruction)"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  f2fs: fix double free of f2fs_sb_info

Pull vfs fixes from Christian Brauner:
 "This contains two fixes for the current merge window. The listmount
  changes that you requested and a fix for a fsnotify performance
  regression:

   - The proposed listmount changes are currently under my authorship. I
     wasn't sure whether you'd wanted to be author as the patch wasn't
     signed off. If you do I'm happy if you just apply your own patch.

     I've tested the patch with my sh4 cross-build setup. And confirmed
     that a) the build failure with sh on current upstream is
     reproducible and that b) the proposed patch fixes the build
     failure. That should only leave the task of fixing put_user on sh.

   - The fsnotify regression was caused by moving one of the hooks out
     of the security hook in preparation for other fsnotify work. This
     meant that CONFIG_SECURITY would have compiled out the fsnotify
     hook before but didn't do so now.

     That lead to up to 6% performance regression in some io_uring
     workloads that compile all fsnotify and security checks out. Fix
     this by making sure that the relevant hooks are covered by the
     already existing CONFIG_FANOTIFY_ACCESS_PERMISSIONS where the
     relevant hook belongs"

* tag 'vfs-6.8-rc1.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
  fs: rework listmount() implementation
  fsnotify: compile out fsnotify permission hooks if !FANOTIFY_ACCESS_PERMISSIONS

Merge tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc hotfixes from Andrew Morton:
 "For once not mostly MM-related.

  17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable"

* tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  userfaultfd: avoid huge_zero_page in UFFDIO_MOVE
  MAINTAINERS: add entry for shrinker
  selftests: mm: hugepage-vmemmap fails on 64K page size systems
  mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval
  mailmap: switch email for Tanzir Hasan
  mailmap: add old address mappings for Randy
  kernel/crash_core.c: make __crash_hotplug_lock static
  efi: disable mirror feature during crashkernel
  kexec: do syscore_shutdown() in kernel_kexec
  mailmap: update entry for Manivannan Sadhasivam
  fs/proc/task_mmu: move mmu notification mechanism inside mm lock
  mm: zswap: switch maintainers to recently active developers and reviewers
  scripts/decode_stacktrace.sh: optionally use LLVM utilities
  kasan: avoid resetting aux_lock
  lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon
  MAINTAINERS: update LTP maintainers
  kdump: defer the insertion of crashkernel resources

Merge a PNP change, new ACPI IRQ management quirks and a small ACPICA
code update for 6.8-rc1:

 - Make pnp_bus_type const (Greg Kroah-Hartman).

 - Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and ASUS
   Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev).

 - Add new MADT GICC/GICR/ITS non-coherent flags and GICC online capable
   bit handling to ACPICA (Lorenzo Pieralisi).

* pnp:
  PNP: make pnp_bus_type const

* acpi-resource:
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
  ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB

* acpica:
  ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
  ACPICA: MADT: Add GICC online capable bit handling

Merge additional updates for 6.8-rc1 in the thermal core and in the
Intel HFI thermal driver:

 - Add debugfs-based diagnostics support to the thermal core (Daniel
   Lezcano, Dan Carpenter).

 - Fix a power allocator thermal governor issue preventing it from
   resetting cooling devices sometimes (Di Shen).

 - Simplify the thermal netlink API and clean up related code (Rafael J.
   Wysocki).

 - Make the Intel HFI driver support hibernation and deep suspend
   properly (Ricardo Neri).

* thermal-core:
  thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up()
  thermal: gov_power_allocator: avoid inability to reset a cdev
  thermal: helpers: Rearrange thermal_cdev_set_cur_state()
  thermal: netlink: Rework notify API for cooling devices
  thermal: core: Use kstrdup_const() during cooling device registration
  thermal/debugfs: Add thermal debugfs information for mitigation episodes
  thermal/debugfs: Add thermal cooling device debugfs information
  thermal: netlink: Pass thermal zone pointer to notify routines
  thermal: netlink: Drop thermal_notify_tz_trip_add/delete()
  thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down()
  thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()

* thermal-intel:
  thermal: intel: hfi: Add syscore callbacks for system-wide PM

* pm-sleep:
  PM: sleep: Restore asynchronous device resume optimization

* pm-cpufreq:
  Documentation: admin-guide: PM: Fix two typos
  cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake

* pm-qos:
  PM: QoS: Use kcalloc() instead of kzalloc()

It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.

This should let nouveau/gsp work on those.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/all/20240110011826.3996289-1-airlied@gmail.com/

Merge tag 'drm-misc-next-fixes-2024-01-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

A fix for the v3d register readout, and two compilation fixes for
rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/warlsyhbwarbezejzokxvrpnmvoaajonj6khjobvnfrhttrsks@fqoeqrjrct6l

Merge tag 'drm-intel-next-fixes-2024-01-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZZ_IOcLiDG9LJafO@jlahtine-mobl.ger.corp.intel.com

Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Rename gce_plat variable postfix from 'v1~v7' to SoC names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Document the Inter-Processor Communication Controller on the X1E80100 Platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>