- dsi regression fix
- dma-buf pinning fix
- displayport fixes
- llc fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuqLZDAEJwUFKb6m+h3kyxgjDEKa3DPA1fHA69vxbXH=g@mail.gmail.com

Merge tag 'drm-intel-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.13-rc2:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6oxu9ao.fsf@intel.com

Merge tag 'amd-drm-fixes-5.13-2021-05-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.13-2021-05-13:

amdgpu:
- Fixes for flexible array conversions
- Fix sysfs attribute init
- Harvesting fixes
- VCN CG/PG fixes for Picasso

radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com

Remove an unused function and a MAINTAINERS update.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513133617.xq77wwrehpuh7yn2@hendrix

update suspend register settings in Non-DPG mode.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable vcn mgcg flag for picasso.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).

The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.

So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).

v2:
 - Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Update the method of disabling VCN IP for specific SKU for navi1x ASIC,
it will judge whether should add the related IP at the function of
amdgpu_device_ip_block_add().
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Judgement whether to add an sw ip according to the harvest info.

v2: fix indentation (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must
be called to initialize it. (Note: "initialization" only sets the .attr.key
member in this struct; it does not change the value of any other members.)

Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot:

    BUG: key ffff9248900cd148 has not been registered!

Fixes: 9037246b ("drm/amd/display: Add sysfs interface for set/get srm")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct SISLANDS_SMC_SWSTATE doesn't allow for code that accesses
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/amd/pm/powerplay/si_dpm.c:
4820: table->initialState.levels[0].mclk.vDLL_CNTL =
4821:         cpu_to_be32(si_pi->clock_registers.dll_cntl);
...
5021: table->ACPIState.levels[0].mclk.vDLL_CNTL =
5022:         cpu_to_be32(dll_cntl);

because such element cannot be accessed without previously allocating
enough dynamic memory for it to exist (which never actually happens).
So, there is an out-of-bounds bug in this case.

That's why struct SISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 0e1aa13c ("drm/amd/pm: Replace one-element array with
flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of
dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Fixes: 0e1aa13c ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct SISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

4353         table->initialState.levels[0].mclk.vDLL_CNTL =
4354                 cpu_to_be32(si_pi->clock_registers.dll_cntl);
...
4555         table->ACPIState.levels[0].mclk.vDLL_CNTL =
4556                 cpu_to_be32(dll_cntl);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct SISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 96e27e8d ("drm/radeon/si_dpm: Replace one-element array
with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of
dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1583
Fixes: 96e27e8d ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels
and ACPIState.levels are never actually used as flexible arrays. Those
arrays can be used as simple objects of type
NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead.

Currently, the code fails because flexible array _levels_ in
struct NISLANDS_SMC_SWSTATE doesn't allow for code that access
the first element of initialState.levels and ACPIState.levels
arrays:

drivers/gpu/drm/radeon/ni_dpm.c:
1690         table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL =
1691                 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl);
...
1903:   table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl);
1904:   table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2);

because such element cannot exist without previously allocating
any dynamic memory for it (which never actually happens).

That's why struct NISLANDS_SMC_SWSTATE should only be used as type
for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is
created as type for objects initialState, ACPIState and ULVState.

Also, with the change from one-element array to flexible-array member
in commit 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element
array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the
size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to
be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of
NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1.

Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/
Fixes: 434fb1e7 ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE")
Cc: stable@vger.kernel.org
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/dri-devel/9bb5fcbd-daf5-1669-b3e7-b8624b3c36f9@xenosoft.de/Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the typo in DPCD caps used for checking SRC CTL mode of
HDMI2.1 PCON

v2: Corrected Fixes tag (Jani Nikula).
v3: Rebased.

Fixes: 04b6603d ("drm/i915/display: Configure HDMI2.1 Pcon for FRL only if Src-Ctl mode is available")

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "Ville Syrj_l_" <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511120930.12218-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 88a9c548)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

__i915_active_call annotation is required on the retire callback to ensure
correct function alignment.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a21ce8ad ("drm/i915/overlay: Switch to using i915_active tracking")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429083530.849546-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit d8e44e4d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The retire logic uses the 2 lower bits of the pointer to the retire
function to store flags. However, the auto_retire function is not
guaranteed to be aligned to a multiple of 4, which causes crashes as
we jump to the wrong address, for example like this:

2021-04-24T18:03:53.804300Z WARNING kernel: [  516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
2021-04-24T18:03:53.804310Z WARNING kernel: [  516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G     U            5.4.105-13595-g3cd84167b2df #1
2021-04-24T18:03:53.804311Z WARNING kernel: [  516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021
2021-04-24T18:03:53.804312Z WARNING kernel: [  516.876911] Workqueue: events_unbound active_work
2021-04-24T18:03:53.804313Z WARNING kernel: [  516.876914] RIP: 0010:auto_retire+0x1/0x20
2021-04-24T18:03:53.804314Z WARNING kernel: [  516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74
2021-04-24T18:03:53.804319Z WARNING kernel: [  516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286
2021-04-24T18:03:53.804320Z WARNING kernel: [  516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007
2021-04-24T18:03:53.804320Z WARNING kernel: [  516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600
2021-04-24T18:03:53.804321Z WARNING kernel: [  516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff
2021-04-24T18:03:53.804321Z WARNING kernel: [  516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0
2021-04-24T18:03:53.804322Z WARNING kernel: [  516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605
2021-04-24T18:03:53.804323Z WARNING kernel: [  516.876926] FS:  0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000
2021-04-24T18:03:53.804323Z WARNING kernel: [  516.876928] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
2021-04-24T18:03:53.804324Z WARNING kernel: [  516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0
2021-04-24T18:03:53.804325Z WARNING kernel: [  516.876930] PKRU: 55555554
2021-04-24T18:03:53.804325Z WARNING kernel: [  516.876931] Call Trace:
2021-04-24T18:03:53.804326Z WARNING kernel: [  516.876935]  __active_retire+0x77/0xcf
2021-04-24T18:03:53.804326Z WARNING kernel: [  516.876939]  process_one_work+0x1da/0x394
2021-04-24T18:03:53.804327Z WARNING kernel: [  516.876941]  worker_thread+0x216/0x375
2021-04-24T18:03:53.804327Z WARNING kernel: [  516.876944]  kthread+0x147/0x156
2021-04-24T18:03:53.804335Z WARNING kernel: [  516.876946]  ? pr_cont_work+0x58/0x58
2021-04-24T18:03:53.804335Z WARNING kernel: [  516.876948]  ? kthread_blkcg+0x2e/0x2e
2021-04-24T18:03:53.804336Z WARNING kernel: [  516.876950]  ret_from_fork+0x1f/0x40
2021-04-24T18:03:53.804336Z WARNING kernel: [  516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer cros_ec_sensors_ring kfifo_buf industrialio cros_ec_sensorhub
2021-04-24T18:03:53.804337Z WARNING kernel: [  516.876972]  cdc_ether usbnet iwlmvm lzo_rle lzo_compress iwl7000_mac80211 iwlwifi zram cfg80211 r8152 mii btusb btrtl btintel btbcm bluetooth ecdh_generic ecc joydev
2021-04-24T18:03:53.804337Z EMERG kernel: [  516.879169] gsmi: Log Shutdown Reason 0x03

This change fixes this by aligning the function.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Fixes: 229007e0 ("drm/i915: Wrap i915_active in a simple kreffed struct")
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429031021.1218091-1-marcheu@chromium.org
(cherry picked from commit ca419f40)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Our code analyzer reported a double free bug.

In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated
via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base
is freed by i915_gem_object_put() with a reference dropped. Then free_pd
calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put()
to put pde->pt.base again.

As pde->pt.base is protected by refcount, so the second put will not free
pde->pt.base actually. But, maybe it is better to remove the first put?

Fixes: 82adf901 ("drm/i915/gt: Shrink i915_page_directory's slab bucket")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426124340.4238-1-lyl2019@mail.ustc.edu.cn
(cherry picked from commit ac69496f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them
as such.

Fixes: 1c8242c3 ("drm/i915: Use unchecked writes for setting up the fences")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-3-ville.syrjala@linux.intel.com
(cherry picked from commit f765a5b4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Gen2 tiles are 2KiB in size so i915_gem_object_get_tile_row_size()
can in fact return <4KiB, which leads to div-by-zero here.
Avoid that.

Not sure i915_gem_object_get_tile_row_size() is entirely
sane anyway since it doesn't account for the different tile
layouts on i8xx/i915...

I'm not able to hit this before commit 6846895f ("drm/i915:
Replace PIN_NONFAULT with calls to PIN_NOEVICT") and it looks
like I also need to run recent version of Mesa. With those in
place xonotic trips on this quite easily on my 85x.

Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-2-ville.syrjala@linux.intel.com
(cherry picked from commit ed52c62d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Screen flickers on Innolux eDP 1.3 panel when clock rate 540000 is in use.

According to the panel vendor, though clock rate 540000 is advertised,
but the max clock rate it really supports is 270000.

Ville Syrjälä mentioned that fast and narrow also breaks some eDP 1.4
panel, so use slow and wide training for all panels to resolve the
issue.

User also confirmed that the new strategy doesn't introduce any
regression on XPS 9380.

v2:
 - Use slow and wide for everything.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3384
References: https://gitlab.freedesktop.org/drm/intel/-/issues/272Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421052054.1434718-1-kai.heng.feng@canonical.com
(cherry picked from commit acca7762)
Fixes: 2bbd6dba ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure")
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Start this new release drm-misc-fixes branch
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Old e-mail address doesn't work anymore, update it to new one.

Link: https://lore.kernel.org/r/20210505173335.1483575-1-jernej.skrabec@gmail.comSigned-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

    drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
    static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
                        ^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Bit later than usual, I queued them all up on Friday then promptly
  forgot to write the pull request email. This is mainly amdgpu fixes,
  with some radeon/msm/fbdev and one i915 gvt fix thrown in.

  amdgpu:
   - MPO hang workaround
   - Fix for concurrent VM flushes on vega/navi
   - dcefclk is not adjustable on navi1x and newer
   - MST HPD debugfs fix
   - Suspend/resumes fixes
   - Register VGA clients late in case driver fails to load
   - Fix GEM leak in user framebuffer create
   - Add support for polaris12 with 32 bit memory interface
   - Fix duplicate cursor issue when using overlay
   - Fix corruption with tiled surfaces on VCN3
   - Add BO size and stride check to fix BO size verification

  radeon:
   - Fix off-by-one in power state parsing
   - Fix possible memory leak in power state parsing

  msm:
   - NULL ptr dereference fix

  fbdev:
   - procfs disabled warning fix

  i915:
   - gvt: Fix a possible division by zero in vgpu display rate
     calculation"

* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Use device specific BO size & stride check.
  drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
  drm/amd/pm: initialize variable
  drm/radeon: Avoid power table parsing memory leaks
  drm/radeon: Fix off-by-one power_state index heap overwrite
  drm/amd/display: Fix two cursor duplication when using overlay
  drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
  fbmem: Mark proc_fb_seq_ops as __maybe_unused
  drm/msm/dpu: Delete bonkers code
  drm/i915/gvt: Prevent divided by zero when calculating refresh rate
  amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
  drm/amdgpu: Register VGA clients after init can no longer fail
  drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
  drm/amdgpu: fix r initial values
  drm/amd/display: fix wrong statement in mst hpd debugfs
  amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
  amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
  drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
  drm/amd/display: Reject non-zero src_y and src_x for video planes

Pull block fix from Jens Axboe:
 "Turns out the bio max size change still has issues, so let's get it
  reverted for 5.13-rc1. We'll shake out the issues there and defer it
  to 5.14 instead"

* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
  Revert "bio: limit bio max size"

Pull cifs fixes from Steve French:
 "Three small SMB3 chmultichannel related changesets (also for stable)
  from the SMB3 test event this week.

  The other fixes are still in review/testing"

* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: if max_channels set to more than one channel request multichannel
  smb3: do not attempt multichannel to server which does not support it
  smb3: when mounting with multichannel include it in requested capabilities

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent PSI state corruption when schedule() races with cgroup
     move.

     A recent commit combined two PSI callbacks to reduce the number of
     cgroup tree updates, but missed that schedule() can drop rq::lock
     for load balancing, which opens the race window for
     cgroup_move_task() which then observes half updated state.

     The fix is to solely use task::ps_flags instead of looking at the
     potentially mismatching scheduler state

   - Prevent an out-of-bounds access in uclamp caused bu a rounding
     division which can lead to an off-by-one error exceeding the
     buckets array size.

   - Prevent unfairness caused by missing load decay when a task is
     attached to a cfs runqueue.

     The old load of the task was attached to the runqueue and never
     removed. Fix it by enforcing the load update through the hierarchy
     for unthrottled run queue instances.

   - A documentation fix fot the 'sched_verbose' command line option"

* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix unfairness caused by missing load decay
  sched: Fix out-of-bound access in uclamp
  psi: Fix psi state corruption when schedule() races with cgroup move
  sched,doc: sched_debug_verbose cmdline should be sched_verbose

Pull locking fixes from Thomas Gleixner:
 "A set of locking related fixes and updates:

   - Two fixes for the futex syscall related to the timeout handling.

     FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
     because it's not set the time namespace adjustment for clock
     MONOTONIC is applied wrongly.

     FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
     always a relative timeout.

   - Cleanups in the futex syscall entry points which became obvious
     when the two timeout handling bugs were fixed.

   - Cleanup of queued_write_lock_slowpath() as suggested by Linus

   - Fixup of the smp_call_function_single_async() prototype"

* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Make syscall entry points less convoluted
  futex: Get rid of the val2 conditional dance
  futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
  Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
  locking/qrwlock: Cleanup queued_write_lock_slowpath()
  smp: Fix smp_call_function_single_async prototype

Pull x86 perf fix from Borislav Petkov:
 "Handle power-gating of AMD IOMMU perf counters properly when they are
  used"

* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

Pull x86 fixes from Borislav Petkov:
 "A bunch of things accumulated for x86 in the last two weeks:

   - Fix guest vtime accounting so that ticks happening while the guest
     is running can also be accounted to it. Along with a consolidation
     to the guest-specific context tracking helpers.

   - Provide for the host NMI handler running after a VMX VMEXIT to be
     able to run on the kernel stack correctly.

   - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
     relevant - real hw supports both)

   - A code generation improvement to TASK_SIZE_MAX through the use of
     alternatives

   - The usual misc and related cleanups and improvements"

* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: x86: Consolidate guest enter/exit logic to common helpers
  context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
  context_tracking: Consolidate guest enter/exit wrappers
  sched/vtime: Move guest enter/exit vtime accounting to vtime.h
  sched/vtime: Move vtime accounting external declarations above inlines
  KVM: x86: Defer vtime accounting 'til after IRQ handling
  context_tracking: Move guest exit vtime accounting to separate helpers
  context_tracking: Move guest exit context tracking to separate helpers
  KVM/VMX: Invoke NMI non-IST entry instead of IST entry
  x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
  x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
  x86/resctrl: Fix init const confusion
  x86: Delete UD0, UD1 traces
  x86/smpboot: Remove duplicate includes
  x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant

This reverts commit cd2c7545.

Alex reports that the commit causes corruption with LUKS on ext4. Revert
it for now so that this can be investigated properly.

Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid over-allocating the kernel's mapping on !MMU systems,
   which could lead to up to 2MiB of lost memory

 - The SiFive address extension errata only manifest on rv64, they are
   now disabled on rv32 where they are unnecessary

 - A pair of late-landing cleanups

* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused handle_exception symbol
  riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
  riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
  riscv: Only extend kernel reservation if mapped read-only

intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().

End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer.  gcc-11 correctly warns
about this case:

  drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
   3491 |                     !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
        |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
  In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
  include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
   1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
        |      ^~~~~~~~~~~~~~~~~~~~
       6:14 elapsed

This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.

There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes in various drivers (qla2xxx, ufs,
  scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
  driver to remove the open coded iteration functions in favour of the
  scsi provided ones"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Use scsi_host_busy_iter() to traverse commands
  scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
  scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
  scsi: ufs: core: Narrow down fast path in system suspend path
  scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
  scsi: ufs: core: Do not put UFS power into LPM if link is broken
  scsi: qla2xxx: Prevent PRLI in target mode
  scsi: qla2xxx: Add marginal path handling support
  scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
  scsi: ufs: core: Fix a typo in ufs-sysfs.c
  scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
  scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
  scsi: lpfc: Fix illegal memory access on Abort IOCBs
  scsi: blk-mq: Fix build warning when making htmldocs

Pull more Kbuild updates from Masahiro Yamada:

 - Convert sh and sparc to use generic shell scripts to generate the
   syscall headers

 - refactor .gitignore files

 - Update kernel/config_data.gz only when the content of the .config
   is really changed, which avoids the unneeded re-link of vmlinux

 - move "remove stale files" workarounds to scripts/remove-stale-files

 - suppress unused-but-set-variable warnings by default for Clang
   as well

 - fix locale setting LANG=C to LC_ALL=C

 - improve 'make distclean'

 - always keep intermediate objects from scripts/link-vmlinux.sh

 - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained

 - misc cleanups

* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
  kbuild: Don't remove link-vmlinux temporary files on exit/signal
  kbuild: remove the unneeded comments for external module builds
  kbuild: make distclean remove tag files in sub-directories
  kbuild: make distclean work against $(objtree) instead of $(srctree)
  kbuild: refactor modname-multi by using suffix-search
  kbuild: refactor fdtoverlay rule
  kbuild: parameterize the .o part of suffix-search
  arch: use cross_compiling to check whether it is a cross build or not
  kbuild: remove ARCH=sh64 support from top Makefile
  .gitignore: prefix local generated files with a slash
  kbuild: replace LANG=C with LC_ALL=C
  Makefile: Move -Wno-unused-but-set-variable out of GCC only block
  kbuild: add a script to remove stale generated files
  kbuild: update config_data.gz only when the content of .config is changed
  .gitignore: ignore only top-level modules.builtin
  .gitignore: move tags and TAGS close to other tag files
  kernel/.gitgnore: remove stale timeconst.h and hz.bc
  usr/include: refactor .gitignore
  genksyms: fix stale comment
  ...

Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>

We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.

See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull powerpc updates and fixes from Michael Ellerman:
 "A bit of a mixture of things, tying up some loose ends.

  There's the removal of the nvlink code, which dependend on a commit in
  the vfio tree. Then the enablement of huge vmalloc which was in next
  for a few weeks but got dropped due to conflicts. And there's also a
  few fixes.

  Summary:

   - Remove the nvlink support now that it's only user has been removed.

   - Enable huge vmalloc mappings for Radix MMU (P9).

   - Fix KVM conversion to gfn-based MMU notifier callbacks.

   - Fix a kexec/kdump crash with hot plugged CPUs.

   - Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.

   - Restore alphabetic order of the selects under CONFIG_PPC.

  Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
  Sandipan Das, and Sourabh Jain"

* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
  powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
  powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
  powerpc/powernv/memtrace: Fix dcache flushing
  powerpc/kexec_file: Use current CPU info while setting up FDT
  powerpc/64s/radix: Enable huge vmalloc mappings
  powerpc/powernv: remove the nvlink support