1. 28 Dec, 2009 5 commits
    • Gertjan van Wingerde's avatar
      rt2x00: Add USB ID for Linksys WUSB 600N rev 2. · 5e312589
      Gertjan van Wingerde authored
      This is a rt2870 based device.
      Signed-off-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
      Acked-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      5e312589
    • Bob Copeland's avatar
      ath5k: fix SWI calibration interrupt storm · 242ab7ad
      Bob Copeland authored
      The calibration period is now invoked by triggering a software
      interrupt from within the ISR by ath5k_hw_calibration_poll()
      instead of via a timer.
      
      However, the calibration interval isn't initialized before
      interrupts are enabled, so we can have a situation where an
      interrupt occurs before the interval is assigned, so the
      interval is actually negative.  As a result, the ISR will
      arm a software interrupt to schedule the tasklet, and then
      rearm it when the SWI is processed, and so on, leading to a
      softlockup at modprobe time.
      
      Move the initialization order around so the calibration interval
      is set before interrupts are active.  Another possible fix
      is to schedule the tasklet directly from the poll routine,
      but I think there are additional plans for the SWI.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Cc: stable@kernel.org
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      242ab7ad
    • Felix Fietkau's avatar
      mac80211: fix ibss join with fixed-bssid · 2e10d330
      Felix Fietkau authored
      When fixed bssid is requested when joining an ibss network, incoming
      beacons that match the configured bssid cause mac80211 to create new
      sta entries, even before the ibss interface is in joined state.
      When that happens, it fails to bring up the interface entirely, because
      it checks for existing sta entries before joining.
      This patch fixes this bug by refusing to create sta info entries before
      the interface is fully operational.
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      2e10d330
    • Samuel Ortiz's avatar
      libertas: Remove carrier signaling from the scan code · 659c8e52
      Samuel Ortiz authored
      There is no reason to signal a carrier off when doing a 802.11 scan.
      
      Cc: Holger Schurig <holgerschurig@gmail.com>
      Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
      Acked-by: default avatarDan Williams <dcbw@redhat.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      659c8e52
    • Andrey Borzenkov's avatar
      orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled · 5b069150
      Andrey Borzenkov authored
      orinoco_set_key is called from two places both with interrupts disabled
      (under orinoco_lock). Use GFP_ATOMIC instead of GFP_KERNEL. Fixes following
      warning:
      
      [   77.254109] WARNING: at /home/bor/src/linux-git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x9a/0xa0()
      [   77.254109] Hardware name: PORTEGE 4000
      [   77.254109] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod loop nvram toshiba cryptomgr aead pcompress crypto_blkcipher michael_mic crypto_hash crypto_algapi orinoco_cs orinoco cfg80211 smsc_ircc2 pcmcia irda toshiba_acpi yenta_socket video i2c_ali1535 backlight rsrc_nonstatic ali_agp pcmcia_core psmouse output crc_ccitt i2c_core alim1535_wdt rfkill sg evdev ohci_hcd agpgart usbcore pata_ali libata reiserfs [last unloaded: scsi_wait_scan]
      [   77.254109] Pid: 2296, comm: wpa_supplicant Not tainted 2.6.32-1avb #1
      [   77.254109] Call Trace:
      [   77.254109]  [<c011f0ad>] warn_slowpath_common+0x6d/0xa0
      [   77.254109]  [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0
      [   77.254109]  [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0
      [   77.254109]  [<c011f0f5>] warn_slowpath_null+0x15/0x20
      [   77.254109]  [<c014206a>] lockdep_trace_alloc+0x9a/0xa0
      [   77.254109]  [<c018d296>] __kmalloc+0x36/0x130
      [   77.254109]  [<dffcb6a8>] ? orinoco_set_key+0x48/0x1c0 [orinoco]
      [   77.254109]  [<dffcb6a8>] orinoco_set_key+0x48/0x1c0 [orinoco]
      [   77.254109]  [<dffcb9fc>] orinoco_ioctl_set_encodeext+0x1dc/0x2d0 [orinoco]
      [   77.254109]  [<c035b117>] ioctl_standard_call+0x207/0x3b0
      [   77.254109]  [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco]
      [   77.254109]  [<c0307f1f>] ? rtnl_lock+0xf/0x20
      [   77.254109]  [<c0307f1f>] ? rtnl_lock+0xf/0x20
      [   77.254109]  [<c02fb115>] ? __dev_get_by_name+0x85/0xb0
      [   77.254109]  [<c035b616>] wext_handle_ioctl+0x176/0x200
      [   77.254109]  [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco]
      [   77.254109]  [<c030020f>] dev_ioctl+0x6af/0x730
      [   77.254109]  [<c02eec65>] ? move_addr_to_kernel+0x55/0x60
      [   77.254109]  [<c02eed59>] ? sys_sendto+0xe9/0x130
      [   77.254109]  [<c02ed77e>] sock_ioctl+0x7e/0x250
      [   77.254109]  [<c02ed700>] ? sock_ioctl+0x0/0x250
      [   77.254109]  [<c019cf4c>] vfs_ioctl+0x1c/0x70
      [   77.254109]  [<c019d1fa>] do_vfs_ioctl+0x6a/0x590
      [   77.254109]  [<c0178e50>] ? might_fault+0x90/0xa0
      [   77.254109]  [<c0178e0a>] ? might_fault+0x4a/0xa0
      [   77.254109]  [<c02ef90e>] ? sys_socketcall+0x17e/0x280
      [   77.254109]  [<c019d759>] sys_ioctl+0x39/0x60
      [   77.254109]  [<c0102e3b>] sysenter_do_call+0x12/0x32
      [   77.254109] ---[ end trace 95ef563548d21efd ]---
      Signed-off-by: default avatarAndrey Borzenkov <arvidjaar@mail.ru>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      5b069150
  2. 21 Dec, 2009 22 commits
    • Benjamin Herrenschmidt's avatar
      ps3_gelic_wireless: Fix build failure due to missing WEXT_PRIV · 92c6f8d8
      Benjamin Herrenschmidt authored
      The option to support the old style PSK interface in the PS3
      GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarGeoff Levand <geoffrey.levand@am.sony.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      92c6f8d8
    • Johannes Berg's avatar
      mac80211: fix WMM AP settings application · 0183826b
      Johannes Berg authored
      My
        commit 77fdaa12
        Author: Johannes Berg <johannes@sipsolutions.net>
        Date:   Tue Jul 7 03:45:17 2009 +0200
      
            mac80211: rework MLME for multiple authentications
      
      inadvertedly broke WMM because it removed, along with
      a bunch of other now useless initialisations, the line
      initialising sdata->u.mgd.wmm_last_param_set to -1
      which would make it adopt any WMM parameter set. If,
      as is usually the case, the AP uses WMM parameter set
      sequence number zero, we'd never update it until the
      AP changes the sequence number.
      
      Add the missing initialisation back to get the WMM
      settings from the AP applied locally.
      Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
      Cc: stable@kernel.org [2.6.31+]
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      0183826b
    • Johannes Berg's avatar
      mac80211: fix peer HT capabilities · 9a418af5
      Johannes Berg authored
      I noticed yesterday, because Jeff had noticed
      a speed regression, cf. bug
      http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138
      that the SM PS settings for peers were wrong.
      Instead of overwriting the SM PS settings with
      the local bits, we need to keep the remote bits.
      
      The bug was part of the original HT code from
      over two years ago, but unfortunately nobody
      noticed that it makes no sense -- we shouldn't
      be overwriting the peer's setting with our own
      but rather keep it intact when masking the peer
      capabilities with our own.
      
      While fixing that, I noticed that the masking of
      capabilities is completely useless for most of
      the bits, so also fix those other bits.
      
      Finally, I also noticed that PSMP_SUPPORT no
      longer exists in the final 802.11n version, so
      also remove that.
      Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      9a418af5
    • Roel Kluin's avatar
      iwmc3200wifi: Fix test of unsigned in iwm_ntf_stop_resume_tx() · 8585c2b8
      Roel Kluin authored
      `queue' was unsigned so the test did not work.
      Signed-off-by: default avatarRoel Kluin <roel.kluin@gmail.com>
      Reviewed-by: default avatarPavel Roskin <proski@gnu.org>
      Acked-by: default avatarZhu Yi <yi.zhu@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      8585c2b8
    • Daniel Mack's avatar
      Libertas: fix buffer overflow in lbs_get_essid() · 45b24168
      Daniel Mack authored
      The libertas driver copies the SSID buffer back to the wireless core and
      appends a trailing NULL character for termination. This is
      
      a) unnecessary because the buffer is allocated with kzalloc and is hence
         already NULLed when this function is called, and
      
      b) for priv->curbssparams.ssid_len == 32, it writes back one byte too
         much which causes memory corruptions.
      
      Fix this by removing the extra write.
      Signed-off-by: default avatarDaniel Mack <daniel@caiaq.de>
      Cc: Stephen Hemminger <shemminger@vyatta.com>
      Cc: Maithili Hinge <maithili@marvell.com>
      Cc: Kiran Divekar <dkiran@marvell.com>
      Cc: Michael Hirsch <m.hirsch@raumfeld.com>
      Cc: netdev@vger.kernel.org
      Cc: libertas-dev@lists.infradead.org
      Cc: linux-wireless@lists.infradead.org
      Cc: stable@kernel.org
      Acked-by: default avatarHolger Schurig <holgerschurig@gmail.com>
      Acked-by: default avatarDan Williams <dcbw@redhat.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      45b24168
    • akpm@linux-foundation.org's avatar
      drivers/net/wireless/iwlwifi/iwl-tx.c: fix gcc-3.4.5 warning · 77ca7d9e
      akpm@linux-foundation.org authored
      drivers/net/wireless/iwlwifi/iwl-tx.c: In function `iwl_hw_txq_ctx_free':
      drivers/net/wireless/iwlwifi/iwl-tx.c:410: warning: suggest explicit braces to avoid ambiguous `else'
      
      Cc: Zhu Yi <yi.zhu@intel.com>
      Cc: Reinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      77ca7d9e
    • Sujith's avatar
      ath9k: Stop ANI when doing a reset · 2ab81d4a
      Sujith authored
      The MIB counters are disabled when doing a chip reset.
      Since ANI depends on the MIB registers for its operation, relying
      on the contents of said registers during HW reset results in sub-optimal
      performance.
      
      Cc: stable@kernel.org
      Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      2ab81d4a
    • Sujith's avatar
      ath9k: Fix TX queue draining · e8009e98
      Sujith authored
      When TX DMA termination has failed, the HW has to be reset
      completely. Doing a fast channel change in this case is insufficient.
      Also, change the debug level of a couple of messages to FATAL.
      
      Cc: stable@kernel.org
      Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      e8009e98
    • Sujith's avatar
      ath9k: Fix bug in assigning sequence number · 17b182e3
      Sujith authored
      The internal, driver-specific maintenance of sequence
      numbers is applicable only for HT frames.
      
      Also, remove comments that are not relevant anymore.
      Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      17b182e3
    • Gertjan van Wingerde's avatar
      rt2x00: Fix calculation of rt2800 iveiv entry offset. · 7988436c
      Gertjan van Wingerde authored
      Fix typo. The index should be multiplied by the entry size, not 'and'-ed.
      
      Found via code-inspection.
      Signed-off-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
      Acked-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      7988436c
    • Reinette Chatre's avatar
      iwlwifi: fix 40MHz operation setting on cards that do not allow it · 6c3069b1
      Reinette Chatre authored
      Some devices have 40MHz operation disabled entirely. Ensure that driver do
      not enable 40MHz operation if a channel does not allow this.
      
      This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2135Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      CC: stable@kernel.org
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      6c3069b1
    • Zhu Yi's avatar
      iwl3945: fix panic in iwl3945 driver · dc57a303
      Zhu Yi authored
      3945 updated write_ptr without regard to read_ptr on the Tx path.
      This messes up our TFD on high load and result in the following:
      
      <1>[ 7290.414172] IP: [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
      <4>[ 7290.414205] PGD 0
      <1>[ 7290.414214] Thread overran stack, or stack corrupted
      <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP
      <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input
      <4>[ 7290.414265] CPU 0
      <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress
      <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P           2.6.32-rc8-wl #213 Aspire 5720
      <6>[ 7290.414507] RIP: 0010:[<ffffffffa0dd53a1>]  [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
      <6>[ 7290.414541] RSP: 0018:ffff880002203d60  EFLAGS: 00010246
      <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013
      <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038
      <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100
      <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0
      <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201
      <6>[ 7290.414655] FS:  0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000
      <6>[ 7290.414677] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
      <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0
      <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60)
      <0>[ 7290.414772] Stack:
      <4>[ 7290.414780]  ffff880002203da0 0000000000000046 0000000000000000 0000000000000046
      <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010
      <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000
      <0>[ 7290.414858] Call Trace:
      <0>[ 7290.414867]  <IRQ>
      <4>[ 7290.414884]  [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945]
      <4>[ 7290.414910]  [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60
      <4>[ 7290.414931]  [<ffffffff81049a21>] tasklet_action+0x101/0x110
      <4>[ 7290.414950]  [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160
      <4>[ 7290.414968]  [<ffffffff8100d01c>] call_softirq+0x1c/0x30
      <4>[ 7290.414986]  [<ffffffff8100eff5>] do_softirq+0x75/0xb0
      <4>[ 7290.415003]  [<ffffffff81049ee5>] irq_exit+0x95/0xa0
      <4>[ 7290.415020]  [<ffffffff8100e547>] do_IRQ+0x77/0xf0
      <4>[ 7290.415038]  [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf
      <0>[ 7290.415052]  <EOI>
      <4>[ 7290.415067]  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
      <4>[ 7290.415087]  [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5
      <4>[ 7290.415107]  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
      <4>[ 7290.415130]  [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0
      <4>[ 7290.415149]  [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110
      <4>[ 7290.415168]  [<ffffffff8137b3d5>] ? rest_init+0x75/0x80
      <4>[ 7290.415187]  [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3
      <4>[ 7290.415206]  [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129
      <4>[ 7290.415227]  [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb
      <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f <c6> 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49
      <1>[ 7290.415382] RIP  [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
      <4>[ 7290.415410]  RSP <ffff880002203d60>
      <0>[ 7290.415421] CR2: 0000000000000041
      <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]---
      <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt
      <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P      D    2.6.32-rc8-wl #213
      <4>[ 7290.415486] Call Trace:
      <4>[ 7290.415495]  <IRQ>  [<ffffffff8138c040>] panic+0x7d/0x13a
      <4>[ 7290.415519]  [<ffffffff8101071a>] oops_end+0xda/0xe0
      <4>[ 7290.415538]  [<ffffffff8102e1ea>] no_context+0xea/0x250
      <4>[ 7290.415557]  [<ffffffff81038991>] ? select_task_rq_fair+0x511/0x780
      <4>[ 7290.415578]  [<ffffffff8102e475>] __bad_area_nosemaphore+0x125/0x1e0
      <4>[ 7290.415597]  [<ffffffff81038d0c>] ? __enqueue_entity+0x7c/0x80
      <4>[ 7290.415616]  [<ffffffff81039201>] ? enqueue_task_fair+0x111/0x150
      <4>[ 7290.415636]  [<ffffffff8102e53e>] bad_area_nosemaphore+0xe/0x10
      <4>[ 7290.415656]  [<ffffffff8102e8fa>] do_page_fault+0x26a/0x320
      <4>[ 7290.415674]  [<ffffffff813905df>] page_fault+0x1f/0x30
      <4>[ 7290.415697]  [<ffffffffa0dd53a1>] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945]
      <4>[ 7290.415723]  [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945]
      <4>[ 7290.415746]  [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60
      <4>[ 7290.415764]  [<ffffffff81049a21>] tasklet_action+0x101/0x110
      <4>[ 7290.415783]  [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160
      <4>[ 7290.415801]  [<ffffffff8100d01c>] call_softirq+0x1c/0x30
      <4>[ 7290.415818]  [<ffffffff8100eff5>] do_softirq+0x75/0xb0
      <4>[ 7290.415835]  [<ffffffff81049ee5>] irq_exit+0x95/0xa0
      <4>[ 7290.415852]  [<ffffffff8100e547>] do_IRQ+0x77/0xf0
      <4>[ 7290.415869]  [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf
      <4>[ 7290.415883]  <EOI>  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
      <4>[ 7290.415911]  [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5
      <4>[ 7290.415931]  [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5
      <4>[ 7290.415952]  [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0
      <4>[ 7290.415971]  [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110
      <4>[ 7290.415989]  [<ffffffff8137b3d5>] ? rest_init+0x75/0x80
      <4>[ 7290.416007]  [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3
      <4>[ 7290.416026]  [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129
      <4>[ 7290.416047]  [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb
      Reported-by: default avatarMaxim Levitsky <maximlevitsky@gmail.com>
      Tested-by: default avatarMaxim Levitsky <maximlevitsky@gmail.com>
      Signed-off-by: default avatarZhu Yi <yi.zhu@intel.com>
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      CC: stable@kernel.org
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      dc57a303
    • Reinette Chatre's avatar
      iwlwifi: initialize spinlock before use · 731a29b7
      Reinette Chatre authored
      Recent powersaving work resulted in power management ops being called
      during EEPROM initialization. The lock used by these functions is not
      initialized at this time. Ensure lock is initialized before it is used.
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      731a29b7
    • Reinette Chatre's avatar
      iwl3945: disable power save · bc45a670
      Reinette Chatre authored
      we see from http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2125
      that power saving does not work well on 3945. Since then power saving has
      also been connected with association problems where an AP deathenticates a
      3945 after it is unable to transmit data to it - this happens when 3945
      enters power savings mode.
      
      Disable power save support until issues are resolved.
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      CC: stable@kernel.org
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      bc45a670
    • Johannes Berg's avatar
      iwlwifi: fix more eeprom endian bugs · b7bb1756
      Johannes Berg authored
      I've also for a long time had a problem with the
      temperature calculation code, which I had fixed
      by byte-swapping the values, and now it turns out
      that was the correct fix after all.
      
      Also, any use of iwl_eeprom_query_addr() that is
      for more than a u8 must be cast to little endian,
      and some structs as well.
      
      Fix all this. Again, no real impact on platforms
      that already are little endian.
      Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
      Cc: stable@kernel.org
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      b7bb1756
    • Johannes Berg's avatar
      iwlwifi: fix EEPROM/OTP reading endian annotations and a bug · af6b8ee3
      Johannes Berg authored
      The construct "le16_to_cpu((__force __le16)(r >> 16))" has
      always bothered me when looking through the iwlwifi code,
      it shouldn't be necessary to __force anything, and before
      this code, "r" was obtained with an ioread32, which swaps
      each of the two u16 values in it properly when swapping the
      entire u32 value. I've had arguments about this code with
      people before, but always conceded they were right because
      removing it only made things not work at all on big endian
      platforms.
      
      However, analysing a failure of the OTP reading code, I now
      finally figured out what is going on, and why my intuition
      about that code being wrong was right all along.
      
      It turns out that the 'priv->eeprom' u8 array really wants
      to have the data in it in little endian. So the force code
      above and all really converts *to* little endian, not from
      it. Cf., for instance, the function iwl_eeprom_query16() --
      it reads two u8 values and combines them into a u16, in a
      little-endian way. And considering it more, it makes sense
      to have the eeprom array as on the device, after all not
      all values really are 16-bit values, the MAC address for
      instance is not.
      
      Now, what this really means is that all the annotations are
      completely wrong. The eeprom reading code should fill the
      priv->eeprom array as a __le16 array, with __le16 values.
      
      This also means that iwl_read_otp_word() should really have
      a __le16 pointer as the data argument, since it should be
      filling that in a format suitable for priv->eeprom.
      
      Propagating these changes throughout, iwl_find_otp_image()
      is found to be, now obviously visible, defective -- it uses
      the data returned by iwl_read_otp_word() directly as if it
      was CPU endianness. Fixing that, which is this hunk of the
      patch:
      
      -               next_link_addr = link_value * sizeof(u16);
      +               next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
      
      is the only real change of this patch. Everything else is
      just fixing the sparse annotations.
      
      Also, the bug only shows up on big endian platforms with a
      1000 series card. 5000 and previous series do not use OTP,
      and 6000 series has shadow RAM support which means we don't
      ever use the defective code on any cards but 1000.
      Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
      Cc: stable@kernel.org
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      af6b8ee3
    • Gertjan van Wingerde's avatar
      rt2x00: Disable powersaving for rt61pci and rt2800pci. · 93b6bd26
      Gertjan van Wingerde authored
      We've had many reports of rt61pci failures with powersaving enabled.
      Therefore, as a stop-gap measure, disable powersaving of the rt61pci
      until we have found a proper solution.
      Also disable powersaving on rt2800pci as it most probably will show
      the same problem.
      
      Cc: stable@kernel.org
      Signed-off-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
      Acked-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      93b6bd26
    • Julia Lawall's avatar
      drivers/net/wireless: Correct code taking the size of a pointer · 855da5e0
      Julia Lawall authored
      sizeof(iv16) and sizeof(iv32) are the sizes of pointers.  Change them to
      the size of the copied data.
      
      Furthermore, iveiv_entry is a local structure that has just been
      initialized and is not visible outside this function.  Thus, there would
      seem to be no point to copy data into it.  The order of the arguments is
      thus changed to copy the data into the parameters, which are provided as
      pointers, suggesting in this case that they should be used to return values.
      
      A simplified version of the semantic patch that finds the first problem is as
      follows: (http://coccinelle.lip6.fr/)
      
      // <smpl>
      @@
      expression *x;
      expression f;
      type T;
      @@
      
      *f(...,(T)x,...)
      // </smpl>
      Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
      Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
      Acked-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      855da5e0
    • Benoit Papillault's avatar
      ath9k: Last fix for TX software padding. · 4d91f9f3
      Benoit Papillault authored
      First, we copy/paste the padding stuff from ath9k_tx to ath_tx_cabq since it
      needs to same kind of padding, but for internally generated beacons.
      Next, software padding done on TX needs to be removed before calling
      ieee80211_tx_status. The code was already there in ath_tx_complete but it
      was wrong. Fix it by using ath9k_cmn_padpos. This later code has been
      tested by sending packets to a monitor interface and reading packets from the
      same interface.
      Signed-off-by: default avatarBenoit PAPILLAULT <benoit.papillault@free.fr>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      4d91f9f3
    • Wey-Yi Guy's avatar
      iwlwifi: fix syslog message for event log dump size · 521d9bce
      Wey-Yi Guy authored
      When trigger event log dumping from debugfs, the entire event log
      should be dumped and the size should match the number of events being
      dump.
      Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      521d9bce
    • Reinette Chatre's avatar
      iwlwifi: power up all devices for EEPROM read · f8701fe3
      Reinette Chatre authored
      Recent commits "iwlwifi: remove power-wasting calls to apm_ops.init()" and
      "iwlagn: power up device before initializing EEPROM" had the goal of
      reducing device power consumption from the time the module is loaded until
      the interface is brought up and the device's power saving mechanisms kick
      in. The idea is that once the module is loaded there is no need for the
      device to consume power until the interface is brought up.
      
      With the current solution the device is only powered up during EEPROM read,
      and then so also only if the EEPROM type is OTP. We have found that on
      certain platforms even non-OTP devices require power to be up during EEPROM
      read. On these platforms the driver never loads and the system log contains
      the following:
      
      iwlagn 0000:03:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x080403D8
      
      We thus now power up all devices during EEPROM read.
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      f8701fe3
    • Zhu Yi's avatar
      iwlwifi: allocated rx page accounting cleanup · 64a76b50
      Zhu Yi authored
      In iwlwifi, priv->alloc_rxb_page is used to keep track of the Rx
      pages allocated by the driver. This cleans up the page free routines
      by introducing __iwl_free_pages/iwl_free_pages so that the accounting
      is more accurate and less error prone. This also fixes two instances where
      the counter was not updated.
      Signed-off-by: default avatarZhu Yi <yi.zhu@intel.com>
      Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      64a76b50
  3. 14 Dec, 2009 2 commits
  4. 10 Dec, 2009 7 commits
  5. 09 Dec, 2009 4 commits
    • John W. Linville's avatar
      wireless: correctly report signal value for IEEE80211_HW_SIGNAL_UNSPEC · 19deffbe
      John W. Linville authored
      This part was missed in "cfg80211: implement get_wireless_stats",
      probably because sta_set_sinfo already existed and was only handling
      dBm signals.
      
      Cc: stable@kernel.org
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      19deffbe
    • Vivek Natarajan's avatar
      cfg80211: Clear encryption privacy when key off is done. · d55fb891
      Vivek Natarajan authored
      When the current_bss is not set, 'iwconfig <iface> key off' does not
      clear the private flag. Hence after we connect with WEP to an AP and
      then try to connect with another non-WEP AP, it does not work.
      This issue will not be seen if supplicant is used.
      Signed-off-by: default avatarVivek Natarajan <vnatarajan@atheros.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      d55fb891
    • Anton Vorontsov's avatar
      gianfar: Fix build with CONFIG_NET_POLL_CONTROLLER=y · 43de004b
      Anton Vorontsov authored
      commit 46ceb60c ("gianfar: Add
      Multiple group Support") introduced the following build error
      with CONFIG_NET_POLL_CONTROLLER=y:
      
        CC      ggianfar.o
      ggianfar.c: In function 'gfar_netpoll':
      ggianfar.c:2653: error: invalid storage class for function 'gfar_interrupt'
      ggianfar.c:2652: warning: ISO C90 forbids mixed declarations and code
      ggianfar.c:2681: error: invalid storage class for function 'adjust_link'
      ggianfar.c:2764: error: invalid storage class for function 'gfar_set_multi'
      ggianfar.c:2855: error: invalid storage class for function 'gfar_clear_exact_match'
      ggianfar.c:2877: error: invalid storage class for function 'gfar_set_hash_for_addr'
      ggianfar.c:2898: error: invalid storage class for function 'gfar_set_mac_for_addr'
      ggianfar.c:2922: error: invalid storage class for function 'gfar_error'
      ggianfar.c:3020: warning: ISO C90 forbids mixed declarations and code
      ggianfar.c:3032: error: invalid storage class for function 'gfar_init'
      ggianfar.c:3037: error: invalid storage class for function 'gfar_exit'
      ggianfar.c:3041: error: initializer element is not constant
      ggianfar.c:3042: error: initializer element is not constant
      ggianfar.c:3042: warning: ISO C90 forbids mixed declarations and code
      ggianfar.c:3042: error: expected declaration or statement at end of input
      make[1]: *** [ggianfar.o] Error 1
      
      This patch fixes the issue.
      Reported-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43de004b
    • Stanislav Brabec's avatar
      b44 WOL setup: one-bit-off stack corruption kernel panic fix · e0188829
      Stanislav Brabec authored
      About 50% of shutdowns of b44 Ethernet adapter ends by kernel panic
      with kernels compiled with stack-protector.
      
      Checking b44_magic_pattern() return values, one call of
      b44_magic_pattern() returns 127. It means, that set_bit(128, pmask)
      was called on line 1509. It means that bit 0 of 17th byte of pmask was
      overwritten. But pmask has only 16 bytes. Stack corruption happens.
       
      It seems that set_bit() on line 1509 always writes one bit off.
      
      The fix does not only solve the stack corruption, but also makes Wake
      On LAN working on my onboard B44 on Asus A7V-333X mainboard.
      
      It seems that this problem affects all kernel versions since commit
      725ad800 ([PATCH] b44: add wol for old nic) on 2006-06-20.
      Signed-off-by: default avatarStanislav Brabec <sbrabec@suse.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0188829