Since veth is very likely to be enabled and there are some drivers
(e.g. mlx5) where CONFIG_PAGE_POOL_STATS is optional, make
CONFIG_PAGE_POOL_STATS optional for veth too in order to keep it
optional instead of required.
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Horatiu Vultur says:

====================
net: lan966x: Add support for ES0 VCAP

Provide the Egress Stage 0 (ES0) VCAP (Versatile Content-Aware
Processor) support for the lan966x platform.

The ES0 VCAP has only 1 lookup which is accessible with a TC chain
id 10000000.

Currently only one action is support which is vlan pop. Also it is
possible to link the IS1 to ES0 using 'goto chain 10000000'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable the TC command to use the lan966x ES0 VCAP. Currently support
only one action which is vlan pop, other will be added later.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ES0 VCAP port keyset configuration for lan966x and also update
debugfs to show the keyset configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide ES0 (egress stage 0) VCAP model for lan966x.
This provides rewriting functionality in the gress path.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some DHCP server implementations only send the important requested DHCP
options in the final BOOTP reply (DHCPACK).
One example is systemd-networkd.
However, RFC2131, in section 4.3.1 states:

> The server MUST return to the client:
> [...]
> o Parameters requested by the client, according to the following
>   rules:
>
>      -- IF the server has been explicitly configured with a default
>         value for the parameter, the server MUST include that value
>         in an appropriate option in the 'option' field, ELSE

I've reported the issue here:
https://github.com/systemd/systemd/issues/27471

Linux PNP DHCP client implementation only takes into account the DNS
servers received in the first BOOTP reply (DHCPOFFER).
This usually isn't an issue as servers are required to put the same
values in the DHCPOFFER and DHCPACK.
However, RFC2131, in section 4.3.2 states:

> Any configuration parameters in the DHCPACK message SHOULD NOT
> conflict with those in the earlier DHCPOFFER message to which the
> client is responding.  The client SHOULD use the parameters in the
> DHCPACK message for configuration.

When making Linux PNP DHCP client (cmdline ip=dhcp) interact with
systemd-networkd DHCP server, an interesting "protocol misunderstanding"
happens:
Because DNS servers were only specified in the DHCPACK and not in the
DHCPOFFER, Linux will not catch the correct DNS servers: in the first
BOOTP reply (DHCPOFFER), it sees that there is no DNS, and sets as
fallback the IP of the DHCP server itself. When the second BOOTP reply
comes (DHCPACK), it's already too late: the kernel will not overwrite
the fallback setting it has set previously.

This patch makes the kernel overwrite its DNS fallback by DNS servers
specified in the DHCPACK if any.
Signed-off-by: Martin Wetterwald <martin@wetterwald.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since veth_convert_skb_to_xdp_buff routine runs in veth_poll() NAPI,
rely on napi_build_skb() instead of build_skb() to reduce skb allocation
cost.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/0f822c0b72f8b71555c11745cb8fb33399d02de9.1683578488.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit af9bf701 ("net: stmmac: add ethtool per-queue irq statistic
support") introduced ethtool per-queue statistics support to display
number of interrupts generated by DMA tx and DMA rx for DWMAC4 core.
This patch extend the support to XGMAC core.
Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230508144339.3014402-1-ji.sheng.teoh@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Uwe Kleine-König says:

====================
net: stmmac: Convert to platform remove callback returning void

(implicit) v1 of this series is available at
https://lore.kernel.org/netdev/20230402143025.2524443-1-u.kleine-koenig@pengutronix.de

Changes since then:

 - Added various Reviewed-by: and Acked-by: tags received for v1
 - Removed a variable in an earlier patch to make all intermediate steps
   compilable, spotted by Simon Horman
 - Rebased to v6.4-rc1 (which needed a slight adaption to cope for
   4bd3bb7b ("net: stmmac: Add glue layer for StarFive JH7110 SoC"))
====================

Link: https://lore.kernel.org/r/20230508142637.1449363-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The remove callback is only ever called after .probe() returned
successfully. After that get_stmmac_bsp_priv() always return non-NULL.

Side note: The early exit would also be a bug because the return value
of qcom_ethqos_remove() is ignored by the device core and the device is
unbound unconditionally. So exiting early resulted in a dangerous
resource leak as all devm allocated resources (some memory and the
register mappings) are freed but the network device stays around.  Using
the network device afterwards probably oopses.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The function returns zero unconditionally. Change it to return void
instead which simplifies one caller as error handing becomes
unnecessary.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The function returns zero unconditionally. Change it to return void instead
which simplifies some callers as error handing becomes unnecessary.

The function is also used for some drivers as remove callback. Switch these
to the .remove_new() callback. For some others no error can happen in the
remove callback now, convert them to .remove_new(), too.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Xuan Zhuo says:

====================
virtio_net: refactor xdp codes

Due to historical reasons, the implementation of XDP in virtio-net
is relatively chaotic. For example, the processing of XDP actions
has two copies of similar code. Such as page, xdp_page processing, etc.

The purpose of this patch set is to refactor these code. Reduce the difficulty
of subsequent maintenance. Subsequent developers will not introduce new bugs
because of some complex logical relationships.

In addition, the supporting to AF_XDP that I want to submit later will
also need to reuse the logic of XDP, such as the processing of actions,
I don't want to introduce a new similar code. In this way, I can reuse
these codes in the future.
====================

Link: https://lore.kernel.org/r/20230508061417.65297-1-xuanzhuo@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This logic is used in multiple places, now we separate it into
a helper.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simplifying receive_small() function. Bringing the logic relating to
build_skb together.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Because the skb build code is not shared between xdp and non-xdp, and
the xdp code in receive_small() is simpler, so "skip_xdp" is not needed.
We can remove it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid the problem that some variables(headroom and so on) will repeat
the calculation when process xdp.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the case of XDP-PASS, skb_reserve uses the "delta" to compatible
non-XDP, now that is not shared between xdp and non-xdp, so we can
remove this logic.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of this patch is to simplify the receive_small().
Separate all the logic of XDP of small into a function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now, the logic of merge xdp process is simple, we can remove the
skip_xdp.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of this patch is to simplify the receive_mergeable().
Separate all the logic of XDP into a function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtnet_build_xdp_buff_mrg() auto release xdp shinfo then the caller no
need to careful the xdp shinfo.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch introduce a new function that frees the rest mergeable buf.
The subsequent patch will reuse this function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch introduce a new function that releases the
xdp shinfo. The subsequent patch will reuse this function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At present, we have two similar logic to perform the XDP prog.

Therefore, this patch separates the code of executing XDP, which is
conducive to later maintenance.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The previous patch, in order to facilitate review, I do not do any
modification. This patch has made some optimization on the top.

* remove some repeated logics in this function.
* add fast check for passing without any alloc.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Separating the logic of preparation for xdp from receive_mergeable.

The purpose of this is to simplify the logic of execution of XDP.

The main logic here is that when headroom is insufficient, we need to
allocate a new page and calculate offset. It should be noted that if
there is new page, the variable page will refer to the new page.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the xdp implementation of virtio-net mergeable, it always checks
whether two page is used and a page is selected to release. This is
complicated for the processing of action, and be careful.

In the entire process, we have such principles:
* If xdp_page is used (PASS, TX, Redirect), then we release the old
  page.
* If it is a drop case, we will release two. The old page obtained from
  buf is release inside err_xdp, and xdp_page needs be relased by us.

But in fact, when we allocate a new page, we can release the old page
immediately. Then just one is using, we just need to release the new
page for drop case. On the drop path, err_xdp will release the variable
"page", so we only need to let "page" point to the new xdp_page in
advance.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit c9929f0e ("mm/slob: remove CONFIG_SLOB") removes CONFIG_SLOB.
Now, we can also remove special handling for socket buffers with the SLOB
allocator. The code with HAVE_SKB_SMALL_HEAD_CACHE=1 is now the default
behavior for all allocators.

Remove an unnecessary distinction between SLOB and SLAB/SLUB allocator
after the SLOB allocator is gone.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230509071207.28942-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid reading link modes from management firmware every time when
`ethtool_get_link_ksettings` is called, only communicate with
management firmware when necessary like we do for eth_table info.

This change can ease the situation that when large number of vlan
sub-interfaces are created and their information is requested by
some monitoring process like PCP [1] through ethool ioctl frequently.

[1] https://pcp.ioSigned-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230509075817.10566-1-louis.peens@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The DP83869 PHY on TI's k3-am642-evm supports both MII and RGMII
interfaces and is configured by default to use RGMII interface (strap).
However, the board design allows switching dynamically to MII interface
for testing purposes by applying different set of pinmuxes.

To support switching to MII interface, update the DP83869 PHY driver to
configure OP_MODE_DECODE.RGMII_MII_SEL(bit 5) properly when MII PHY
interface mode is requested.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230508070359.357474-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - sched: act_pedit: free pedit keys on bail from offset check

  Current release - new code bugs:

   - pds_core:
      - Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
      - fix mutex double unlock in error path

  Previous releases - regressions:

   - sched: cls_api: remove block_cb from driver_list before freeing

   - nf_tables: fix ct untracked match breakage

   - eth: mtk_eth_soc: drop generic vlan rx offload

   - sched: flower: fix error handler on replace

  Previous releases - always broken:

   - tcp: fix skb_copy_ubufs() vs BIG TCP

   - ipv6: fix skb hash for some RST packets

   - af_packet: don't send zero-byte data in packet_sendmsg_spkt()

   - rxrpc: timeout handling fixes after moving client call connection
     to the I/O thread

   - ixgbe: fix panic during XDP_TX with > 64 CPUs

   - igc: RMW the SRRCTL register to prevent losing timestamp config

   - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621

   - r8152:
      - fix flow control issue of RTL8156A
      - fix the poor throughput for 2.5G devices
      - move setting r8153b_rx_agg_chg_indicate() to fix coalescing
      - enable autosuspend

   - ncsi: clear Tx enable mode when handling a Config required AEN

   - octeontx2-pf: macsec: fixes for CN10KB ASIC rev

  Misc:

   - 9p: remove INET dependency"

* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
  pds_core: fix mutex double unlock in error path
  net/sched: flower: fix error handler on replace
  Revert "net/sched: flower: Fix wrong handle assignment during filter change"
  net/sched: flower: fix filter idr initialization
  net: fec: correct the counting of XDP sent frames
  bonding: add xdp_features support
  net: enetc: check the index of the SFI rather than the handle
  sfc: Add back mailing list
  virtio_net: suppress cpu stall when free_unused_bufs
  ice: block LAN in case of VF to VF offload
  net: dsa: mt7530: fix network connectivity with multiple CPU ports
  net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
  9p: Remove INET dependency
  netfilter: nf_tables: fix ct untracked match breakage
  af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
  igc: read before write to SRRCTL register
  pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
  pds_core: remove CONFIG_DEBUG_FS from makefile
  ionic: catch failure from devlink_alloc
  ...