- 24 Mar, 2014 27 commits
-
-
Arnd Bergmann authored
commit 0a8d8c44 upstream. Since commit d25f06ea "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Neil Horman authored
commit d25f06ea upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Radim Krčmář authored
commit 596f3142 upstream. We always disable cr8 intercept in its handler, but only re-enable it if handling KVM_REQ_EVENT, so there can be a window where we do not intercept cr8 writes, which allows an interrupt to disrupt a higher priority task. Fix this by disabling intercepts in the same function that re-enables them when needed. This fixes BSOD in Windows 2008. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d03874c8 upstream. We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Artem Fetishev authored
commit 70335abb upstream. The expected logic of proc_map_files_get_link() is either to return 0 and initialize 'path' or return an error and leave 'path' uninitialized. By the time dname_to_vma_addr() returns 0 the corresponding vma may have already be gone. In this case the path is not initialized but the return value is still 0. This results in 'general protection fault' inside d_path(). Steps to reproduce: CONFIG_CHECKPOINT_RESTORE=y fd = open(...); while (1) { mmap(fd, ...); munmap(fd, ...); } ls -la /proc/$PID/map_files Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991Signed-off-by:
Artem Fetishev <artem_fetishev@epam.com> Signed-off-by:
Aleksandr Terekhov <aleksandr_terekhov@epam.com> Reported-by: <wiebittewas@gmail.com> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
commit 755a48a7 upstream. The clean-up in commit 36281caa ended up removing a NULL pointer check that is needed in order to prevent an Oops in nfs_async_inode_return_delegation(). Reported-by:
"Yan, Zheng" <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/5313E9F6.2020405@intel.com Fixes: 36281caa (NFSv4: Further clean-ups of delegation stateid validation) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Michele Baldessari authored
commit b28a613e upstream. Via commit 87809942 "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8" we added a quirk for disks named "ST1000LM024 HN-M101MBB" with firmware revision "2AR10001". As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901, we need to also add firmware revision 2BA30001 as it is broken as well. Reported-by:
Nicholas <arealityfarbetween@googlemail.com> Signed-off-by:
Michele Baldessari <michele@acksyn.org> Tested-by:
Guilherme Amadio <guilherme.amadio@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 70044d71 upstream. PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57b "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Signed-off-by:
-
Stefan Richter authored
commit 89875833 upstream. Commit 8408dc1c "firewire: net: use dev_printk API" introduced a use-after-free in a failure path. fwnet_transmit_packet_failed(ptask) may free ptask, then the dev_err() call dereferenced it. The fix is straightforward; simply reorder the two calls. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 45ab2813 upstream. If a module fails to add its tracepoints due to module tainting, do not create the module event infrastructure in the debugfs directory. As the events will not work and worse yet, they will silently fail, making the user wonder why the events they enable do not display anything. Having a warning on module load and the events not visible to the users will make the cause of the problem much clearer. Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org Fixes: 6d723736 "tracing/events: add support for modules to TRACE_EVENT" Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Li Zefan authored
commit 99afb0fd upstream. It's not safe to access task's cpuset after releasing task_lock(). Holding callback_mutex won't help. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Chuansheng Liu authored
commit c685689f upstream. We hit one rare case below: T1 calling disable_irq(), but hanging at synchronize_irq() always; The corresponding irq thread is in sleeping state; And all CPUs are in idle state; After analysis, we found there is one possible scenerio which causes T1 is waiting there forever: CPU0 CPU1 synchronize_irq() wait_event() spin_lock() atomic_dec_and_test(&threads_active) insert the __wait into queue spin_unlock() if(waitqueue_active) atomic_read(&threads_active) wake_up() Here after inserted the __wait into queue on CPU0, and before test if queue is empty on CPU1, there is no barrier, it maybe cause it is not visible for CPU1 immediately, although CPU0 has updated the queue list. It is similar for CPU0 atomic_read() threads_active also. So we'd need one smp_mb() before waitqueue_active.that, but removing the waitqueue_active() check solves it as wel l and it makes things simple and clear. Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Cc: Xiaoming Wang <xiaoming.wang@intel.com> Link: http://lkml.kernel.org/r/1393212590-32543-1-git-send-email-chuansheng.liu@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Daniel J Blueman authored
commit 847d7970 upstream. For systems with multiple servers and routed fabric, all northbridges get assigned to the first server. Fix this by also using the node reported from the PCI bus. For single-fabric systems, the northbriges are on PCI bus 0 by definition, which are on NUMA node 0 by definition, so this is invarient on most systems. Tested on fam10h and fam15h single and multi-fabric systems and candidate for stable. Signed-off-by:
Daniel J Blueman <daniel@numascale.com> Acked-by:
Steffen Persvold <sp@numascale.com> Acked-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Linus Walleij authored
commit 052450fd upstream. Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Anton Blanchard authored
commit a5b2cf5b upstream. The 64bit relocation code places a few symbols in the text segment. These symbols are only 4 byte aligned where they need to be 8 byte aligned. Add an explicit alignment. Signed-off-by:
Anton Blanchard <anton@samba.org> Tested-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Takashi Iwai authored
commit e805ca8b upstream. Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Roman Volkov authored
commit 3dd77654 upstream. Actually CS4245 connected to the I2S channel 1 for capture, not channel 2. Otherwise capturing and playback does not work for CS4245. Signed-off-by:
Roman Volkov <v1ron@mail.ru> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Rob Clark authored
commit 9ef7506f upstream. A few of the simpler TTM drivers (cirrus, ast, mgag200) do not implement this function. Yet can end up somehow with an evicted bo: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 16e761067 PUD 16e6cf067 PMD 0 Oops: 0010 [#1] SMP Modules linked in: bnep bluetooth rfkill fuse ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables sg btrfs zlib_deflate raid6_pq xor dm_queue_length iTCO_wdt iTCO_vendor_support coretemp kvm dcdbas dm_service_time microcode serio_raw pcspkr lpc_ich mfd_core i7core_edac edac_core ses enclosure ipmi_si ipmi_msghandler shpchp acpi_power_meter mperf nfsd auth_rpcgss nfs_acl lockd uinput sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sr_mod cdrom sd_mod usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit lpfc drm_kms_helper ttm crc32c_intel ata_piix bfa drm ixgbe libata i2c_core mdio crc_t10dif ptp crct10dif_common pps_core scsi_transport_fc dca scsi_tgt megaraid_sas bnx2 dm_mirror dm_region_hash dm_log dm_mod CPU: 16 PID: 2572 Comm: X Not tainted 3.10.0-86.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R810/0H235N, BIOS 0.3.0 11/14/2009 task: ffff8801799dabc0 ti: ffff88016c884000 task.ti: ffff88016c884000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88016c885ad8 EFLAGS: 00010202 RAX: ffffffffa04e94c0 RBX: ffff880178937a20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000240004 RDI: ffff880178937a00 RBP: ffff88016c885b60 R08: 00000000000171a0 R09: ffff88007cf171a0 R10: ffffea0005842540 R11: ffffffff810487b9 R12: ffff880178937b30 R13: ffff880178937a00 R14: ffff88016c885b78 R15: ffff880179929400 FS: 00007f81ba2ef980(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000016e763000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0306fae ffff8801799295c0 0000000000260004 0000000000000001 ffff88016c885b60 ffffffffa0307669 00ff88007cf17738 ffff88017cf17700 ffff880178937a00 ffff880100000000 ffff880100000000 0000000079929400 Call Trace: [<ffffffffa0306fae>] ? ttm_bo_handle_move_mem+0x54e/0x5b0 [ttm] [<ffffffffa0307669>] ? ttm_bo_mem_space+0x169/0x340 [ttm] [<ffffffffa0307bd7>] ttm_bo_move_buffer+0x117/0x130 [ttm] [<ffffffff81130001>] ? perf_event_init_context+0x141/0x220 [<ffffffffa0307cb1>] ttm_bo_validate+0xc1/0x130 [ttm] [<ffffffffa04e7377>] mgag200_bo_pin+0x87/0xc0 [mgag200] [<ffffffffa04e56c4>] mga_crtc_cursor_set+0x474/0xbb0 [mgag200] [<ffffffff811971d2>] ? __mem_cgroup_commit_charge+0x152/0x3b0 [<ffffffff815c4182>] ? mutex_lock+0x12/0x2f [<ffffffffa0201433>] drm_mode_cursor_common+0x123/0x170 [drm] [<ffffffffa0205231>] drm_mode_cursor_ioctl+0x41/0x50 [drm] [<ffffffffa01f5ca2>] drm_ioctl+0x502/0x630 [drm] [<ffffffff815cbab4>] ? __do_page_fault+0x1f4/0x510 [<ffffffff8101cb68>] ? __restore_xstate_sig+0x218/0x4f0 [<ffffffff811b4445>] do_vfs_ioctl+0x2e5/0x4d0 [<ffffffff8124488e>] ? file_has_perm+0x8e/0xa0 [<ffffffff811b46b1>] SyS_ioctl+0x81/0xa0 [<ffffffff815d05d9>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88016c885ad8> CR2: 0000000000000000 Signed-off-by:
Rob Clark <rclark@redhat.com> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Amitkumar Karwar authored
commit c99b1861 upstream. While preparing association request, intersection of device's HT capability information and corresponding fields advertised by AP is used. This patch fixes an error while copying this field from AP's beacon. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Sujith Manoharan authored
commit b3050248 upstream. The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Reported-by:
Jeang Daniel <dyjeong@qca.qualcomm.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 1d147bfa upstream. There is a race between the TX path and the STA wakeup: while a station is sleeping, mac80211 buffers frames until it wakes up, then the frames are transmitted. However, the RX and TX path are concurrent, so the packet indicating wakeup can be processed while a packet is being transmitted. This can lead to a situation where the buffered frames list is emptied on the one side, while a frame is being added on the other side, as the station is still seen as sleeping in the TX path. As a result, the newly added frame will not be send anytime soon. It might be sent much later (and out of order) when the station goes to sleep and wakes up the next time. Additionally, it can lead to the crash below. Fix all this by synchronising both paths with a new lock. Both path are not fastpath since they handle PS situations. In a later patch we'll remove the extra skb queue locks to reduce locking overhead. BUG: unable to handle kernel NULL pointer dereference at 000000b0 IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1 EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211] EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000 ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000) iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9 Stack: e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0 ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210 ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002 Call Trace: [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211] [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211] [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211] [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211] [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211] [<c149ef70>] dev_hard_start_xmit+0x450/0x950 [<c14b9aa9>] sch_direct_xmit+0xa9/0x250 [<c14b9c9b>] __qdisc_run+0x4b/0x150 [<c149f732>] dev_queue_xmit+0x2c2/0xca0 Reported-by:
Yaara Rozenblum <yaara.rozenblum@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by:
Stanislaw Gruszka <sgruszka@redhat.com> [reword commit log, use a separate lock] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit ec0223ec ] RFC4895 introduced AUTH chunks for SCTP; during the SCTP handshake RANDOM; CHUNKS; HMAC-ALGO are negotiated (CHUNKS being optional though): ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- A special case is when an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- RFC4895, section 6.3. Receiving Authenticated Chunks says: The receiver MUST use the HMAC algorithm indicated in the HMAC Identifier field. If this algorithm was not specified by the receiver in the HMAC-ALGO parameter in the INIT or INIT-ACK chunk during association setup, the AUTH chunk and all the chunks after it MUST be discarded and an ERROR chunk SHOULD be sent with the error cause defined in Section 4.1. [...] If no endpoint pair shared key has been configured for that Shared Key Identifier, all authenticated chunks MUST be silently discarded. [...] When an endpoint requires COOKIE-ECHO chunks to be authenticated, some special procedures have to be followed because the reception of a COOKIE-ECHO chunk might result in the creation of an SCTP association. If a packet arrives containing an AUTH chunk as a first chunk, a COOKIE-ECHO chunk as the second chunk, and possibly more chunks after them, and the receiver does not have an STCB for that packet, then authentication is based on the contents of the COOKIE-ECHO chunk. In this situation, the receiver MUST authenticate the chunks in the packet by using the RANDOM parameters, CHUNKS parameters and HMAC_ALGO parameters obtained from the COOKIE-ECHO chunk, and possibly a local shared secret as inputs to the authentication procedure specified in Section 6.3. If authentication fails, then the packet is discarded. If the authentication is successful, the COOKIE-ECHO and all the chunks after the COOKIE-ECHO MUST be processed. If the receiver has an STCB, it MUST process the AUTH chunk as described above using the STCB from the existing association to authenticate the COOKIE-ECHO chunk and all the chunks after it. [...] Commit bbd0d598 introduced the possibility to receive and verification of AUTH chunk, including the edge case for authenticated COOKIE-ECHO. On reception of COOKIE-ECHO, the function sctp_sf_do_5_1D_ce() handles processing, unpacks and creates a new association if it passed sanity checks and also tests for authentication chunks being present. After a new association has been processed, it invokes sctp_process_init() on the new association and walks through the parameter list it received from the INIT chunk. It checks SCTP_PARAM_RANDOM, SCTP_PARAM_HMAC_ALGO and SCTP_PARAM_CHUNKS, and copies them into asoc->peer meta data (peer_random, peer_hmacs, peer_chunks) in case sysctl -w net.sctp.auth_enable=1 is set. If in INIT's SCTP_PARAM_SUPPORTED_EXT parameter SCTP_CID_AUTH is set, peer_random != NULL and peer_hmacs != NULL the peer is to be assumed asoc->peer.auth_capable=1, in any other case asoc->peer.auth_capable=0. Now, if in sctp_sf_do_5_1D_ce() chunk->auth_chunk is available, we set up a fake auth chunk and pass that on to sctp_sf_authenticate(), which at latest in sctp_auth_calculate_hmac() reliably dereferences a NULL pointer at position 0..0008 when setting up the crypto key in crypto_hash_setkey() by using asoc->asoc_shared_key that is NULL as condition key_id == asoc->active_key_id is true if the AUTH chunk was injected correctly from remote. This happens no matter what net.sctp.auth_enable sysctl says. The fix is to check for net->sctp.auth_enable and for asoc->peer.auth_capable before doing any operations like sctp_sf_authenticate() as no key is activated in sctp_auth_asoc_init_active_key() for each case. Now as RFC4895 section 6.3 states that if the used HMAC-ALGO passed from the INIT chunk was not used in the AUTH chunk, we SHOULD send an error; however in this case it would be better to just silently discard such a maliciously prepared handshake as we didn't even receive a parameter at all. Also, as our endpoint has no shared key configured, section 6.3 says that MUST silently discard, which we are doing from now onwards. Before calling sctp_sf_pdiscard(), we need not only to free the association, but also the chunk->auth_chunk skb, as commit bbd0d598 created a skb clone in that case. I have tested this locally by using netfilter's nfqueue and re-injecting packets into the local stack after maliciously modifying the INIT chunk (removing RANDOM; HMAC-ALGO param) and the SCTP packet containing the COOKIE_ECHO (injecting AUTH chunk before COOKIE_ECHO). Fixed with this patch applied. Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit d7b95315 ] Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes a customer reported issue of randomly dropping packets on the 5719. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 0e7ede80 ] We should alloc big buffers also when guest can receive UFO packets to let the big packets fit into guest rx buffer. Fixes 5c516751 (virtio-net: Allow UFO feature to be set and advertised.) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
George McCollister authored
commit 791c9e02 upstream. dequeue_entity() is called when p->on_rq and sets se->on_rq = 0 which appears to guarentee that the !se->on_rq condition is met. If the task has done set_current_state(TASK_INTERRUPTIBLE) without schedule() the second condition will be met and vruntime will be incorrectly adjusted twice. In certain cases this can result in the task's vruntime never increasing past the vruntime of other tasks on the CFS' run queue, starving them of CPU time. This patch changes switched_from_fair() to use !p->on_rq instead of !se->on_rq. I'm able to cause a task with a priority of 120 to starve all other tasks with the same priority on an ARM platform running 3.2.51-rt72 PREEMPT RT by writing one character at time to a serial tty (16550 UART) in a tight loop. I'm also able to verify making this change corrects the problem on that platform and kernel version. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392767811-28916-1-git-send-email-george.mccollister@gmail.comSigned-off-by:
-
Al Viro authored
commit 1b56e989 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit 15c34a76 upstream. Global quota files are accessed from different nodes. Thus we cannot cache offset of quota structure in the quota file after we drop our node reference count to it because after that moment quota structure may be freed and reallocated elsewhere by a different node resulting in corruption of quota file. Fix the problem by clearing dq_off when we are releasing dquot structure. We also remove the DB_READ_B handling because it is useless - DQ_ACTIVE_B is set iff DQ_READ_B is set. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
- 11 Mar, 2014 13 commits
-
-
Greg Kroah-Hartman authored
-
Emil Goode authored
commit d43ff4cd upstream. The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Reported-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Lucas Stach authored
commit 8b5b6f54 upstream. ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet header may now cross URB boundaries. To handle this we have to introduce some state between individual calls to asix_rx_fixup(). Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Mark Cave-Ayland authored
commit 0c5d63f0 upstream. All of the rtlwifi drivers have an error in the routine that tests if the data is "special". If it is, the subsequant transmission will be at the lowest rate to enhance reliability. The 16-bit quantity is big-endian, but was being extracted in native CPU mode. One of the effects of this bug is to inhibit association under some conditions as the TX rate is too high. Based on suggestions by Joe Perches, the entire routine is rewritten. One of the local headers contained duplicates of some of the ETH_P_XXX definitions. These are deleted. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 08a5dd38 upstream. Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> [wujg: Backported to 3.4: - Adjust context - Do not drop const from struct iwl_cfg] Signed-off-by:
-
Stanislaw Gruszka authored
commit 9186a1fd upstream. If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [<ffffffff8130924d>] strnlen+0xd/0x40 Call Trace: [<ffffffff8130ad2e>] string.isra.3+0x3e/0xd0 [<ffffffff8130bf99>] vsnprintf+0x219/0x640 [<ffffffff8130c481>] vscnprintf+0x11/0x30 [<ffffffff81061585>] vprintk_emit+0x115/0x4f0 [<ffffffff81657bd5>] printk+0x61/0x63 [<ffffffffa048987f>] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [<ffffffffa04e7b34>] iwl_chswitch_done+0x34/0x40 [iwldvm] [<ffffffffa04f83c3>] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [<ffffffffa04ebc50>] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [<ffffffffa04e5e76>] iwl_set_mode+0x36/0x40 [iwldvm] [<ffffffffa04e5f0d>] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [<ffffffffa0459b3d>] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581Reported-by:
Lukasz Jagiello <jagiello.lukasz@gmail.com> Signed-off-by:
-
Johannes Berg authored
commit 707aee40 upstream. The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> [bwh: Backported to 3.2: - Adjust filename - s/priv->lib/priv->cfg/] Signed-off-by:
-
Johannes Berg authored
commit 8a964f44 upstream. The FH hardware will always write back to the scratch field in commands, even host commands not just TX commands, which can overwrite parts of the command. This is problematic if the command is re-used (with IWL_HCMD_DFL_NOCOPY) and can cause calibration issues. Address this problem by always putting at least the first 16 bytes into the buffer we also use for the command header and therefore make the DMA engine write back into this. For commands that are smaller than 16 bytes also always map enough memory for the DMA engine to write back to. Reviewed-by:
-
Johannes Berg authored
commit 7c341582 upstream. The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error"). Reported-by:
Shuah Khan <shuah.khan@hp.com> Reviewed-by:
-
Emmanuel Grumbach authored
commit 25a17265 upstream. This can lead to a panic if the driver isn't ready to handle them. Since our interrupt line is shared, we can get an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks that even when the interrupt is being freed). If the op_mode has gone away, we musn't call it. To avoid this the transport disables the interrupts when the hw is stopped and the op_mode is leaving. If there is an event that would cause an interrupt the INTA register is updated regardless of the enablement of the interrupts: even if the interrupts are disabled, the INTA will be changed, but the device won't issue an interrupt. But the ISR can be called at any time, so we ought ignore the value in the INTA otherwise we can call the op_mode after it was freed. I found this bug when the op_mode_start failed, and called iwl_trans_stop_hw(trans, true). Then I played with the RFKILL button, and removed the module. While removing the module, the IRQ is freed, and the ISR is called (CONFIG_DEBUG_SHIRQ enabled). Panic. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 4fc79db1 upstream. If the device is not started, we can't read its SRAM and attempting to do so will cause issues. Protect the debugfs read. Signed-off-by:
-
Johannes Berg authored
commit 94543a8d upstream. iwl_dbgfs_fh_reg_read() can cause crashes and/or BUG_ON in slub because the ifdefs are wrong, the code in iwl_dump_fh() should use DEBUGFS, not DEBUG to protect the buffer writing code. Also, while at it, clean up the arguments to the function, some code and make it generally safer. Reported-by:
-
Takashi Iwai authored
commit 60478295 upstream. snd_pcm_stop() must be called in the PCM substream lock context. Signed-off-by:
-
