- 23 Nov, 2011 3 commits
-
-
Eric Miao authored
There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
Just checking the code in cs42l51_fill_cache(): The cache pointer points to codec->reg_cache + 1. I think it is because CS42L51_FIRSTREG is 0x01, so codec->reg_cache[0] is not used here. Then we read CS42L51_NUMREGS bytes to cache. So we need reg_cache_size to be CS42L51_NUMREGS + 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Paul Bolle authored
SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca968 ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 Nov, 2011 5 commits
-
-
Timur Tabi authored
Commit ac601555 ("ASoC: Return early with -EINVAL if invalid dai format is detected") requires the machine driver to tell the CS4270 codec driver whether the CS4270 should be configured for master or slave operation. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Daniel Mack authored
Replace the manual register restore mechanism in cs4270.c and call the generic snd_soc_cache_sync() handler instead. This factors code out in favour of core facilities and also fixes a bus confusion that is most probably caused by intermixing i2c-regmap functions and i2c_smbus_* accessors. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Boojin Kim authored
This patch adds <linux/modules.h> to fix following build errors. sound/soc/codecs/wm8994.c: In function 'wm8994_readable': sound/soc/codecs/wm8994.c:58: warning: unused variable 'wm8994' sound/soc/samsung/smdk_wm8994.c:176: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk_wm8994.c:176: warning: data definition has no type or storage class sound/soc/samsung/smdk_wm8994.c:176: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk_wm8994.c:176: warning: function declaration isn't a prototype sound/soc/samsung/smdk_wm8994.c:177: error: expected declaration specifiers or '...' before string constant Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
In the case of ((max9877_regs[reg] >> shift) & mask) != val but ((max9877_regs[reg2] >> shift) & mask) == val2, current code does not update the registers. Fix the logic to update registers if either val or val2 is changed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
According to the datasheet: The BIT[5:4] of ADC Control Register 2 is to control the word width. 00 = 25 Bits 01 = 20 Bits 10 = 16 Bits 11 = Invalid Thus, the AD1836_ADC_WORD_OFFSET should be defined as 4. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 21 Nov, 2011 2 commits
-
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
-
- 20 Nov, 2011 8 commits
-
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent the last entry from being omitted. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
-
- 17 Nov, 2011 1 commit
-
-
Timo Juhani Lindfors authored
This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann <mok@fluxnetz.de>. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 15 Nov, 2011 1 commit
-
-
Timur Tabi authored
Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute") requires 'struct attribute' objects to be initialized with sysfs_attr_init(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 14 Nov, 2011 1 commit
-
-
Johannes Stezenbach authored
The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 10 Nov, 2011 1 commit
-
-
Jassi Brar authored
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 Nov, 2011 5 commits
-
-
Axel Lin authored
WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h). Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL register (04h). Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting VMID 2*240k. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
-
Linus Torvalds authored
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
-
- 07 Nov, 2011 13 commits
-
-
Al Viro authored
Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events
-
Tony Lindgren authored
-
Tony Lindgren authored
Commit 32aaeffb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Axel Lin authored
Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
david decotigny authored
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mandeep Baines authored
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike Ditto authored
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Rothwell authored
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-