- 03 Apr, 2019 40 commits
-
-
Arnd Bergmann authored
commit 3d54d10c upstream. When EXTCON is a loadable module, mtu3 fails to link as built-in: drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe': mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle' Add a Kconfig dependency to force mtu3 also to be a loadable module if extconn is, but still allow it to be built without extcon. Fixes: d0ed062a ("usb: mtu3: dual-role mode support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen-Yu Tsai authored
commit 1396929e upstream. While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a3134 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c29 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Axel Lin authored
commit c5bc6e52 upstream. Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a40 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Reviewed-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Kangjie Lu authored
commit 7ecced09 upstream. ida_simple_get may fail and return a negative error number. The fix checks its return value; if it fails, go to err_destroy. Cc: <stable@vger.kernel.org> Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Zhenyu Wang authored
commit 13bcb80b upstream. When MI_FLUSH_DW post write hw status page in index mode, the index value is in dword step and turned into address offset in cmd dword1. As status page size is 4K, so can't exceed that. This fixed upper bound check in cmd parser code which incorrectly stopped VM for reason of invalid MI_FLUSH_DW write index. v2: - Fix upper bound as 4K page size because index value is address offset. Fixes: be1da707 ("drm/i915/gvt: vGPU command scanner") Cc: stable@vger.kernel.org # v4.10+ Cc: "Zhao, Yan Y" <yan.y.zhao@intel.com> Reviewed-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Eric Biggers authored
commit 36b6c9ed upstream. If drm_gem_handle_create() fails in vkms_gem_create(), then the vkms_gem_object is freed twice: once when the reference is dropped by drm_gem_object_put_unlocked(), and again by the extra calls to drm_gem_object_release() and kfree(). Fix it by skipping the second release and free. This bug was originally found in the vgem driver by syzkaller using fault injection, but I noticed it's also present in the vkms driver. Fixes: 559e50fd ("drm/vkms: Add dumb operations") Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Eric Biggers authored
commit 21d2b122 upstream. If drm_gem_handle_create() fails in vgem_gem_create(), then the drm_vgem_gem_object is freed twice: once when the reference is dropped by drm_gem_object_put_unlocked(), and again by __vgem_gem_destroy(). This was hit by syzkaller using fault injection. Fix it by skipping the second free. Reported-by: syzbot+e73f2fb5ed5a5df36d33@syzkaller.appspotmail.com Fixes: af33a919 ("drm/vgem: Enable dmabuf import interfaces") Reviewed-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
YueHaibing authored
commit 23da9588 upstream. Syzkaller reports: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599 Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91 RSP: 0018:ffff8881d828f238 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267 RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178 RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259 R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4 R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000 FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0xbc/0x1000 [br_netfilter] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 770020de38961fd0 ]--- A new dir entry can be created in get_subdir and its 'header->parent' is set to NULL. Only after insert_header success, it will be set to 'dir', otherwise 'header->parent' is set to NULL and drop_sysctl_table is called. However in err handling path of get_subdir, drop_sysctl_table also be called on 'new->header' regardless its value of parent pointer. Then put_links is called, which triggers NULL-ptr deref when access member of header->parent. In fact we have multiple error paths which call drop_sysctl_table() there, upon failure on insert_links() we also call drop_sysctl_table().And even in the successful case on __register_sysctl_table() we still always call drop_sysctl_table().This patch fix it. Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wentao Wang authored
commit 3ec80029 upstream. Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd45316 ("kgdboc: Fix restrict error") Signed-off-by:
Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Bjørn Mork authored
commit 84f3b43f upstream. This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Cc: stable@vger.kernel.org Signed-off-by:
Bjørn Mork <bjorn@mork.no> [ johan: use tabs to align comments in adjacent lines ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Kristian Evensen authored
commit d1252f02 upstream. The Quectel EM12 is a Cat. 12 LTE modem. It behaves in the exactly the same way as the EP06 (including the dynamic configuration behavior), so the same checks on reserved interfaces, etc. are needed. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Mans Rullgard authored
commit f8df5c2c upstream. The SIMCom SIM5218 and compatible devices have 5 USB interfaces, only 4 of which are serial ports. The fifth is a network interface supported by the qmi-wwan driver. Furthermore, the serial ports do not support modem control signals. Add driver_info flags to reflect this. Signed-off-by:
Mans Rullgard <mans@mansr.com> Fixes: ec0cd94d ("usb: option: add SIMCom SIM5218") Cc: stable <stable@vger.kernel.org> # 3.2 Signed-off-by:
-
Lin Yi authored
commit 2908b076 upstream. The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by:
Lin Yi <teroincn@163.com> Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by:
-
George McCollister authored
commit 422c2537 upstream. Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be automatically detected. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit a595ecdd upstream. Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor. Reported-by:
Uli <t9cpu@web.de> Signed-off-by:
-
Hoan Nguyen An authored
commit 93bcefd4 upstream. We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by:
Hoan Nguyen An <na-hoan@jinso.co.jp> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Aditya Pakki authored
commit 32f47179 upstream. of_match_device on failure to find a matching device can return a NULL pointer. The patch checks for such a scenrio and passes the error upstream. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Aditya Pakki authored
commit 3a10e3dd upstream. of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by:
-
Chao Yu authored
commit 8bce6dce upstream. erofs_vmap() wrapped vmap() and vm_map_ram() to return virtual continuous memory, but both of them can failed due to a lot of reason, previously, erofs_vmap()'s callers didn't handle them, which can potentially cause NULL pointer access, fix it. Fixes: 3883a79a ("staging: erofs: introduce VLE decompression support") Fixes: 0d40d6e3 ("staging: erofs: add a generic z_erofs VLE decompressor") Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Malcolm Priestley authored
commit 3b9c2f2e upstream. It appears on some slower systems that the driver can find its way out of the workqueue while the interrupt is disabled by continuous polling by it. Move MACvIntEnable to vnt_interrupt_work so that it is always enabled on all routes out of vnt_interrupt_process. Move MACvIntDisable so that the device doesn't keep polling the system while the workqueue is being processed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> CC: stable@vger.kernel.org # v4.2+ Signed-off-by:
-
Malcolm Priestley authored
commit cc26358f upstream. A check for vif is made in vnt_interrupt_work. There is a small chance of leaving interrupt disabled while vif is NULL and the work hasn't been scheduled. Signed-off-by:
-
Samuel Thibault authored
commit 45ac7b31 upstream. When switching from speakup_soft to another synth, speakup_soft would keep calling synth_buffer_getc() from softsynthx_read. Let's thus make synth.c export the knowledge of the current synth, so that speakup_soft can determine whether it should be running. speakup_soft also needs to set itself alive, otherwise the switch would let it remain silent. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ian Abbott authored
commit bafd9c64 upstream. `ni_cdio_cmdtest()` validates Comedi asynchronous commands for the DIO subdevice (subdevice 2) of supported National Instruments M-series cards. It is called when handling the `COMEDI_CMD` and `COMEDI_CMDTEST` ioctls for this subdevice. There are two causes for a possible divide-by-zero error when validating that the `stop_arg` member of the passed-in command is not too large. The first cause for the divide-by-zero is that calls to `comedi_bytes_per_scan()` are only valid once the command has been copied to `s->async->cmd`, but that copy is only done for the `COMEDI_CMD` ioctl. For the `COMEDI_CMDTEST` ioctl, it will use whatever was left there by the previous `COMEDI_CMD` ioctl, if any. (This is very likely, as it is usual for the application to use `COMEDI_CMDTEST` before `COMEDI_CMD`.) If there has been no previous, valid `COMEDI_CMD` for this subdevice, then `comedi_bytes_per_scan()` will return 0, so the subsequent division in `ni_cdio_cmdtest()` of `s->async->prealloc_bufsz / comedi_bytes_per_scan(s)` will be a divide-by-zero error. To fix this error, call a new function `comedi_bytes_per_scan_cmd(s, cmd)`, based on the existing `comedi_bytes_per_scan(s)` but using a specified `struct comedi_cmd` for its calculations. (Also refactor `comedi_bytes_per_scan()` to call the new function.) Once the first cause for the divide-by-zero has been fixed, the second cause is that `comedi_bytes_per_scan_cmd()` can legitimately return 0 if the `scan_end_arg` member of the `struct comedi_cmd` being tested is 0. Fix it by only performing the division (and validating that `stop_arg` is no more than the maximum value) if `comedi_bytes_per_scan_cmd()` returns a non-zero value. The problem was reported on the COMEDI mailing list here: https://groups.google.com/forum/#!topic/comedi_list/4t9WlHzMhKMReported-by:
Ivan Vasilyev <grabesstimme@gmail.com> Tested-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Nathan Chancellor authored
commit c5cbc78a upstream. When building with -Wsometimes-uninitialized, Clang warns: drivers/tty/serial/qcom_geni_serial.c:1079:6: warning: variable 'baud' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] It's not wrong; when options is NULL, baud has no default value. Use 9600 as that is a sane default. Link: https://github.com/ClangBuiltLinux/linux/issues/395Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kangjie Lu authored
commit c85be041 upstream. In case dmaengine_prep_dma_cyclic fails, the fix returns a proper error code to avoid NULL pointer dereference. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kangjie Lu authored
commit 67343306 upstream. In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereferences. Multiple places use port.membase. Signed-off-by:
-
Jonas Karlman authored
commit e9abc611 upstream. NV12 framebuffers produced by the VPU shows distorted on RK3288 after win has been disabled when scaling is active. This issue can be reproduced using a 1080p modeset by: - Scale a 1280x720 NV12 framebuffer to 1920x1080 on win0 - Disable win0 - Display a 1920x1080 NV12 framebuffer without scaling on win0 - Output will now show the framebuffer distorted And by: - Scale a 1280x720 NV12 framebuffer to 1920x1080 - Change to a 720p modeset (win gets disabled and scaling reset to none) - Output will now show the framebuffer distorted Fix this by setting scale mode to none when win is disabled. Fixes: 4c156c21 ("drm/rockchip: vop: support plane scale") Cc: stable@vger.kernel.org Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/AM3PR03MB0966DE3E19BACE07328CD637AC7D0@AM3PR03MB0966.eurprd03.prod.outlook.comSigned-off-by:
-
Steffen Maier authored
commit 242ec145 upstream. Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f97 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #3.0+ Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Steffen Maier authored
commit fe67888f upstream. An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by:
-
Martin K. Petersen authored
commit 1d5de5bd upstream. Commit a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") split one conditional into several separate statements in an effort to provide more accurate warning messages when a device reports a nonsensical value. However, this reorganization accidentally dropped the precondition of the reported value being larger than zero. This lead to a warning getting emitted on devices that do not report an optimal I/O size at all. Remain silent if a device does not report an optimal I/O size. Fixes: a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Reported-by:
Hussam Al-Tayeb <ht990332@gmx.com> Tested-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
commit c14a5726 upstream. The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Darrick J. Wong authored
commit e6a9467e upstream. ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that we always grab cluster locks in order of increasing inode number. Unfortunately, we forget to swap the inode record buffer head pointers when we've done this, which leads to incorrect bookkeepping when we're trying to make the two inodes have the same refcount tree. This has the effect of causing filesystem shutdowns if you're trying to reflink data from inode 100 into inode 97, where inode 100 already has a refcount tree attached and inode 97 doesn't. The reflink code decides to copy the refcount tree pointer from 100 to 97, but uses inode 97's inode record to open the tree root (which it doesn't have) and blows up. This issue causes filesystem shutdowns and metadata corruption! Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia Fixes: 29ac8e85 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 73601ea5 upstream. syzbot is hitting lockdep warning [1] due to trying to open a fifo during an execve() operation. But we don't need to open non regular files during an execve() operation, for all files which we will need are the executable file itself and the interpreter programs like /bin/sh and ld-linux.so.2 . Since the manpage for execve(2) says that execve() returns EACCES when the file or a script interpreter is not a regular file, and the manpage for uselib(2) says that uselib() can return EACCES, and we use FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non regular file is requested with FMODE_EXEC set. Since this deadlock followed by khungtaskd warnings is trivially reproducible by a local unprivileged user, and syzbot's frequent crash due to this deadlock defers finding other bugs, let's workaround this deadlock until we get a chance to find a better solution. [1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpReported-by:
syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com> Fixes: 8924feff ("splice: lift pipe_lock out of splice_to_pipe()") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by:
-
Fredrik Noring authored
commit 54a7151b upstream. Fix commit 56067812 ("kbuild: modversions: add infrastructure for emitting relative CRCs") where CRCs are interpreted in host byte order rather than proper kernel byte order. The bug is conditional on CONFIG_MODULE_REL_CRCS. For example, when loading a BE module into a BE kernel compiled with a LE system, the error "disagrees about version of symbol module_layout" is produced. A message such as "Found checksum D7FA6856 vs module 5668FAD7" will be given with debug enabled, which indicates an obvious endian problem within __kcrctab within the kernel image. The general solution is to use the macro TO_NATIVE, as is done in similar cases throughout modpost.c. With this correction it has been verified that a BE kernel compiled with a LE system accepts BE modules. This change has also been verified with a LE kernel compiled with a LE system, in which case TO_NATIVE returns its value unmodified since the byte orders match. This is by far the common case. Fixes: 56067812 ("kbuild: modversions: add infrastructure for emitting relative CRCs") Signed-off-by:
Fredrik Noring <noring@nocrew.org> Cc: stable@vger.kernel.org Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Bernhard Rosenkraenzer authored
commit e2a829b3 upstream. On an Acer Predator Helios 500 (Ryzen version), the laptop's speakers don't work out of the box. The problem can be worked around with hdajackretask, remapping the "Black Headphone, Right side" pin (0x21) to the Internal speaker. This patch adds a quirk to change this mapping by default. [ corrected ALC299_FIXUP_PREDATOR_SPK definition and adapted for the latest tree by tiwai ] Signed-off-by:
Bernhard Rosenkraenzer <bero@lindev.ch> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jian-Hong Pan authored
commit 6ac371aa upstream. The ASUS X430UN and X512DK with ALC256 cannot detect the headset MIC until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied. Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chris Chiu authored
commit a806ef1c upstream. The ASUS laptop P5440FF with ALC256 can't detect the headset microphone until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied. Signed-off-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
-
Jian-Hong Pan authored
commit e1037354 upstream. The ASUS laptop X441MB and X705FD with ALC256 cannot detect the headset MIC until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied. Signed-off-by:
-
Chris Chiu authored
commit c7531e31 upstream. The Acer laptop Aspire E5-523G and ES1-432 with ALC255 can't detect the headset microphone until ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk applied. Signed-off-by:
-
Jian-Hong Pan authored
commit 2733cceb upstream. The Acer Aspire Z24-890 cannot detect the headset MIC until ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk applied. Signed-off-by:
-
