Simplify tls_set_sw_offload a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS_MAX_IV_SIZE + TLS_MAX_SALT_SIZE is 20B, we don't get much benefit
in cipher_context's size and can simplify the init code a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's defined in include/net/tls.h, avoid using an overly generic name.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS_MAX_REC_SEQ_SIZE is 8B, we don't get anything by using kmalloc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should never reach tls_device_reencrypt, tls_enc_record, or
tls_enc_skb with a cipher_type that can't be offloaded. Replace those
checks with a DEBUG_NET_WARN_ON_ONCE, and use cipher_desc instead of
hard-coding offloadable cipher types.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

I skipped this conversion in my previous series.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is just a trivial fix for a typo in a comment, no functional
changes.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The file name used in flash test was "dummy" because at the time test
was written, drivers were responsible for file request and as netdevsim
didn't do that, name was unused. However, the file load request is
now done in devlink code and therefore the file has to exist.
Use first random file from /lib/firmware for this purpose.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add software timestamp capabilities to the xen-netback driver
by advertising it on the struct ethtool_ops and calling
skb_tx_timestamp before passing the buffer to the queue.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

NUL-padding is not required as the buffer is already memset to 0:
|       memset(adapter->fw_version, 0, 32);

Note that another usage of strscpy exists on the same buffer:
|       strscpy((char *)adapter->fw_version, "N/A", sizeof(adapter->fw_version));

Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.

Also, while we're here, let's change memcpy() over to ethtool_sprintf()
for consistency.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use preferred device_get_match_data() instead of of_match_device() and
acpi_match_device() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.

This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use preferred spi_get_device_match_data() instead of of_match_device() and
spi_get_device_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, clock configuration is spread throughout the driver and
partially duplicated for the STM32MP1 and STM32 MCU variants. This makes
it difficult to keep track of which clocks need to be enabled or disabled
in various scenarios.

This patch adds symmetric stm32_dwmac_clk_enable/disable() functions
that handle all clock configuration, including quirks required while
suspending or resuming. syscfg_clk and clk_eth_ck are not present on
STM32 MCUs, but it is fine to try to configure them anyway since NULL
clocks are ignored.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Amit Cohen says:

====================
Extend VXLAN driver to support FDB flushing

The merge commit 92716869 ("Merge branch 'br-flush-filtering'") added
support for FDB flushing in bridge driver. Extend VXLAN driver to support
FDB flushing also. Add support for filtering by fields which are relevant
for VXLAN FDBs:
* Source VNI
* Nexthop ID
* 'router' flag
* Destination VNI
* Destination Port
* Destination IP

Without this set, flush for VXLAN device fails:
$ bridge fdb flush dev vx10
RTNETLINK answers: Operation not supported

With this set, such flush works with the relevant arguments, for example:
$ bridge fdb flush dev vx10 vni 5000 dst 193.2.2.1
< flush all vx10 entries with VNI 5000 and destination IP 193.2.2.1>

Some preparations are required, handle them before adding flushing support
in VXLAN driver. See more details in commit messages.

Patch set overview:
Patch #1 prepares flush policy to be used by VXLAN driver
Patches #2-#3 are preparations in VXLAN driver
Patch #4 adds an initial support for flushing in VXLAN driver
Patches #5-#9 add support for filtering by several attributes
Patch #10 adds a test for FDB flush with VXLAN
Patch #11 extends the test to check FDB flush with bridge
====================
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the test to check flushing with bridge device, test flush by device
and by VID.

Add test case for flushing with "self" and "master" and attributes that are
supported only in one driver, this is unrecommended configuration, check it
to verify that user gets an error.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination IP. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination IP is an attribute of
the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination IP', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.1 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 1000 self permanent

When user flush by destination IP x, only the relevant remotes will be
flushed:
$ bridge fdb flush dev vx10 dst 192.1.1.1

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination port. FDB entry
is stored as {MAC, SRC_VNI} + remote. The destination port is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination port', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent

When user flush by port x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 port 1111

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination VNI. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination VNI is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination VNI', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.2 vni 2000 self permanent

When user flush by VNI x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 vni 2000

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by nexthop ID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by source VNI.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The merge commit 92716869 ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver only, the VXLAN driver does
not support such flushing. Extend VXLAN driver to support FDB flushing.
In this commit, add support for flushing with state and flags, which are
the fields that supported in the bridge driver.

Note that bridge driver supports 'NTF_USE' flag, but there is no point to
support this flag for flushing as it is ignored when flags are stored.
'NTF_STICKY' is not relevant for VXLAN driver.

'NTF_ROUTER' is not supported in bridge driver for flush as it is not
relevant for bridge, add it for VXLAN.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the function vxlan_flush() does not flush the default FDB entry
(an entry with all_zeros_mac and default VNI), as it is deleted at
vxlan_uninit(). When this function will be used for flushing FDB entries
from user space, it will have to flush also the default entry in case that
other parameters match (e.g., VNI, flags).

Extend 'struct vxlan_fdb_flush_desc' to include an indication whether
the default entry should be flushed or not. The default value (false)
indicates to flush it, adjust all the existing callers to set
'.ignore_default_entry' to true, so the current behavior will not be
changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function vxlan_flush() gets a boolean called 'do_all' and in case
that it is false, it does not flush entries with state 'NUD_PERMANENT'
or 'NUD_NOARP'. The following patches will add support for FDB flush
with parameters from user space. Make the function more generic, so it
can be used later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The merge commit 92716869 ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver. The following patches
will extend VXLAN driver to support FDB flushing as well. The netlink
message for bulk delete is shared between the drivers. With the existing
implementation, there is no way to prevent user from flushing with
attributes that are not supported per driver. For example, when VNI will
be added, user will not get an error for flush FDB entries in bridge
with VNI, although this attribute is not relevant for bridge.

As preparation for support of FDB flush in VXLAN driver, move the policy
to be handled in bridge driver, later a new policy for VXLAN will be
added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(),
as this field is relevant only for bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

kernel/bpf/verifier.c
  82995598 ("bpf: Fix verifier log for async callback return values")
  a923819f ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from CAN and BPF.

  We have a regression in TC currently under investigation, otherwise
  the things that stand off most are probably the TCP and AF_PACKET
  fixes, with both issues coming from 6.5.

  Previous releases - regressions:

   - af_packet: fix fortified memcpy() without flex array.

   - tcp: fix crashes trying to free half-baked MTU probes

   - xdp: fix zero-size allocation warning in xskq_create()

   - can: sja1000: always restart the tx queue after an overrun

   - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp

   - eth: nfp: avoid rmmod nfp crash issues

   - eth: octeontx2-pf: fix page pool frag allocation warning

  Previous releases - always broken:

   - mctp: perform route lookups under a RCU read-side lock

   - bpf: s390: fix clobbering the caller's backchain in the trampoline

   - phy: lynx-28g: cancel the CDR check work item on the remove path

   - dsa: qca8k: fix qca8k driver for Turris 1.x

   - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()

   - eth: ixgbe: fix crash with empty VF macvlan list"

* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  rswitch: Fix imbalance phy_power_off() calling
  rswitch: Fix renesas_eth_sw_remove() implementation
  octeontx2-pf: Fix page pool frag allocation warning
  nfc: nci: assert requested protocol is valid
  af_packet: Fix fortified memcpy() without flex array.
  net: tcp: fix crashes trying to free half-baked MTU probes
  net/smc: Fix pos miscalculation in statistics
  nfp: flower: avoid rmmod nfp crash issues
  net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
  ethtool: Fix mod state of verbose no_mask bitset
  net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
  mctp: perform route lookups under a RCU read-side lock
  net: skbuff: fix kernel-doc typos
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
  net/smc: Fix dependency of SMC on ISM
  ixgbe: fix crash with empty VF macvlan list
  net/mlx5e: macsec: use update_pn flag instead of PN comparation
  net: phy: mscc: macsec: reject PN update requests
  ...

Pull ARM SoC fixes from Arnd Bergmann:
 "AngeloGioacchino Del Regno is stepping in as co-maintainer for the
  MediaTek SoC platform and starts by sending some dts fixes for the
  mt8195 platform that had been pending for a while.

  On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
  reflecting that Linus Walleij has been handling this on his own for
  the past few years.

  Generic RISC-V kernels are now marked as incompatible with the RZ/Five
  platform that requires custom hacks both for managing its DMA bounce
  buffers and for addressing low virtual memory.

 Finally, there is one bugfix for the AMDTEE firmware driver to prevent
 a use-after-free bug"

* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  IXP4xx MAINTAINERS entries
  arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
  arm64: dts: mediatek: fix t-phy unit name
  arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
  arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
  MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
  soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
  tee: amdtee: fix use-after-free vulnerability in amdtee_close_session

Pull pmdomain fix from Ulf Hansson:

 - imx: scu-pd: Correct the DMA2 channel

* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: imx: scu-pd: correct DMA2 channel

Pull pin control fixes from Linus Walleij:
 "Some pin control fixes for v6.6 which have been stacking up in my
  tree.

  Dmitry's fix to some locking in the core is the most substantial, that
  was a really neat fix.

  The rest is the usual assorted spray of minor driver fixes.

   - Drop some minor code causing warnings in the Lantiq driver

   - Fix out of bounds write in the Nuvoton driver

   - Fix lost IRQs with CONFIG_PM in the Starfive driver

   - Fix a locking issue in find_pinctrl()

   - Revert a regressive Tegra debug patch

   - Fix the Renesas RZN1 pin muxing"

* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: renesas: rzn1: Enable missing PINMUX
  Revert "pinctrl: tegra: Add support to display pin function"
  pinctrl: avoid unsafe code pattern in find_pinctrl()
  pinctrl: starfive: jh7110: Add system pm ops to save and restore context
  pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
  pinctrl: nuvoton: wpcm450: fix out of bounds write
  pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()

gcc 12 errors out with:
net/core/gso_test.c:58:48: error: initializer element is not constant
   58 |                 .segs = (const unsigned int[]) { gso_size },

This version isn't old (2022), so switch to preprocessor-bsaed constant
instead of 'static const int'.

Cc: Willem de Bruijn <willemb@google.com>
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/netdev/79fbe35c-4dd1-4f27-acb2-7a60794bc348@linux.vnet.ibm.com/
Fixes: 1b4fa28a ("net: parametrize skb_segment unit test to expand coverage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231012120901.10765-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the configuration of CHACHA20-POLY1305 to the driver and send the
message to hardware so that the NIC supports the algorithm.
Signed-off-by: Shihong Wang <shihong.wang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231009080946.7655-2-louis.peens@corigine.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Update MAINTAINERS entries for Intel IXP4xx SoCs.

Linus has been handling all IXP4xx stuff since 2019 or so.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.plSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Yoshihiro Shimoda says:

====================
rswitch: Fix issues on specific conditions

This patch series fix some issues of rswitch driver on specific
condtions.
====================

Link: https://lore.kernel.org/r/20231010124858.183891-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().

Fixes: 5cb63092 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.

Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.

Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
   value 8196 cmode runtime
2. ifconfig eth0 up

[   19.901356] ------------[ cut here ]------------
[   19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[   19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[   19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[   19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901460] sp : ffff80000f66b970
[   19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[   19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[   19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[   19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[   19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[   19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[   19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[   19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[   19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[   19.901487] Call trace:
[   19.901488]  page_pool_alloc_frag+0x3c/0x230
[   19.901490]  __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901494]  otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[   19.901498]  otx2_open+0x228/0xa70 [rvu_nicpf]
[   19.901501]  otx2vf_open+0x20/0xd0 [rvu_nicvf]
[   19.901504]  __dev_open+0x114/0x1d0
[   19.901507]  __dev_change_flags+0x194/0x210
[   19.901510]  dev_change_flags+0x2c/0x70
[   19.901512]  devinet_ioctl+0x3a4/0x6c4
[   19.901515]  inet_ioctl+0x228/0x240
[   19.901518]  sock_ioctl+0x2ac/0x480
[   19.901522]  __arm64_sys_ioctl+0x564/0xe50
[   19.901525]  invoke_syscall.constprop.0+0x58/0xf0
[   19.901529]  do_el0_svc+0x58/0x150
[   19.901531]  el0_svc+0x30/0x140
[   19.901533]  el0t_64_sync_handler+0xe8/0x114
[   19.901535]  el0t_64_sync+0x1a0/0x1a4
[   19.901537] ---[ end trace 678c0bf660ad8116 ]---

Fixes: b2e3406a ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>