1. 04 Mar, 2015 14 commits
    • Fugang Duan's avatar
      net: fec: fix rcv is not last issue when do suspend/resume test · 61615cd2
      Fugang Duan authored
      When do suspend/resume stress test, some log shows "rcv is not +last".
      The issue is that enet suspend will disable phy clock, phy link down,
      after resume back, enet MAC redo initial and ready to tx/rx packet,
      but phy still is not ready which is doing auto-negotiation. When phy
      link is not up, don't schdule napi soft irq.
      
      [Peter]
      It has fixed kernel panic after long time suspend/resume test
      with nfs rootfs.
      
      [ 8864.429458] fec 2188000.ethernet eth0: rcv is not +last
      [ 8864.434799] fec 2188000.ethernet eth0: rcv is not +last
      [ 8864.440088] fec 2188000.ethernet eth0: rcv is not +last
      [ 8864.445424] fec 2188000.ethernet eth0: rcv is not +last
      [ 8864.450782] fec 2188000.ethernet eth0: rcv is not +last
      [ 8864.456111] Unable to handle kernel NULL pointer dereference at virtual address 00000000
      [ 8864.464225] pgd = 80004000
      [ 8864.466997] [00000000] *pgd=00000000
      [ 8864.470627] Internal error: Oops: 17 [#1] SMP ARM
      [ 8864.475353] Modules linked in: evbug
      [ 8864.479006] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc1-00044-g7a2a1d2 #234
      [ 8864.486854] Hardware name: Freescale i.MX6 SoloX (Device Tree)
      [ 8864.492709] task: be069380 ti: be07a000 task.ti: be07a000
      [ 8864.498137] PC is at memcpy+0x80/0x330
      [ 8864.501919] LR is at gro_pull_from_frag0+0x34/0xa8
      [ 8864.506735] pc : [<802bb080>]    lr : [<8057c204>]    psr: 00000113
      [ 8864.506735] sp : be07bbd4  ip : 00000010  fp : be07bc0c
      [ 8864.518235] r10: 0000000e  r9 : 00000000  r8 : 809c7754
      [ 8864.523479] r7 : 809c7754  r6 : bb43c040  r5 : bd280cc0  r4 : 00000012
      [ 8864.530025] r3 : 00000804  r2 : fffffff2  r1 : 00000000  r0 : bb43b83c
      [ 8864.536575] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
      [ 8864.543904] Control: 10c5387d  Table: bd14c04a  DAC: 00000015
      [ 8864.549669] Process ksoftirqd/0 (pid: 3, stack limit = 0xbe07a210)
      [ 8864.555869] Stack: (0xbe07bbd4 to 0xbe07c000)
      [ 8864.560250] bbc0:                                              bd280cc0 bb43c040 809c7754
      [ 8864.568455] bbe0: 809c7754 bb43b83c 00000012 8057c204 00000000 bd280cc0 bd8a0718 00000003
      [ 8864.576658] bc00: be07bc5c be07bc10 8057ebf0 8057c1dc 00000000 00000000 8057ecc4 bef59760
      [ 8864.584863] bc20: 00000002 bd8a0000 be07bc64 809c7754 00000000 bd8a0718 bd280cc0 bd8a0000
      [ 8864.593066] bc40: 00000000 0000001c 00000000 bd8a0000 be07bc74 be07bc60 8057f148 8057eb90
      [ 8864.601268] bc60: bf0810a0 00000000 be07bcf4 be07bc78 8044e7b4 8057f12c 00000000 8007df6c
      [ 8864.609470] bc80: bd8a0718 00000040 00000000 bd280a80 00000002 00000019 bd8a0600 bd8a1214
      [ 8864.617672] bca0: bd8a0690 bf0810a0 00000000 00000000 bd8a1000 00000000 00000027 bd280cc0
      [ 8864.625874] bcc0: 80062708 800625cc 000943db bd8a0718 00000001 000d1166 00000040 be7c1ec0
      [ 8864.634077] bce0: 0000012c be07bd00 be07bd3c be07bcf8 8057fc98 8044e3ac 809c2ec0 3ddff000
      [ 8864.642280] bd00: be07bd00 be07bd00 be07bd08 be07bd08 00000000 00000020 809c608c 00000003
      [ 8864.650481] bd20: 809c6080 40000001 809c6088 00200100 be07bd84 be07bd40 8002e690 8057fac8
      [ 8864.658684] bd40: be07bd64 be07bd50 00000001 04208040 000d1165 0000000a be07bd84 809c0d7c
      [ 8864.666885] bd60: 00000000 809c6af8 00000000 00000001 be008000 00000000 be07bd9c be07bd88
      [ 8864.675087] bd80: 8002eb64 8002e564 00000125 809c0d7c be07bdc4 be07bda0 8006f100 8002eaac
      [ 8864.683291] bda0: c080e10c be07bde8 809c6c6c c080e100 00000002 00000000 be07bde4 be07bdc8
      [ 8864.691492] bdc0: 800087a0 8006f098 806f2934 20000013 ffffffff be07be1c be07be44 be07bde8
      [ 8864.699695] bde0: 800133a4 80008784 00000001 00000001 00000000 00000000 be7c1680 00000000
      [ 8864.707896] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30
      [ 8864.716098] be20: 8006278c 806f2934 20000013 ffffffff be069380 be7c1680 be07be7c be07be48
      [ 8864.724300] be40: 80049cfc 806f2910 00000001 00000000 80049cb4 00000000 be07be7c be7c1680
      [ 8864.732502] be60: be3289c0 be069380 bd23b600 be0cfe00 be07bebc be07be80 806ed614 80049c68
      [ 8864.740706] be80: be07a000 0000020a 809c608c 00000003 00000001 8002e858 be07a000 be035740
      [ 8864.748907] bea0: 00000000 00000001 809d4598 00000000 be07bed4 be07bec0 806edd0c 806ed440
      [ 8864.757110] bec0: be07a000 be07a000 be07bee4 be07bed8 806edd68 806edcf0 be07bef4 be07bee8
      [ 8864.765311] bee0: 8002e860 806edd34 be07bf24 be07bef8 800494b0 8002e828 be069380 00000000
      [ 8864.773512] bf00: be035780 be035740 8004938c 00000000 00000000 00000000 be07bfac be07bf28
      [ 8864.781715] bf20: 80045928 80049398 be07bf44 00000001 00000000 be035740 00000000 00030003
      [ 8864.789917] bf40: dead4ead ffffffff ffffffff 80a2716c 80b59b00 00000000 8088c954 be07bf5c
      [ 8864.798120] bf60: be07bf5c 00000000 00000000 dead4ead ffffffff ffffffff 80a2716c 00000000
      [ 8864.806320] bf80: 00000000 8088c954 be07bf88 be07bf88 be035780 8004584c 00000000 00000000
      [ 8864.814523] bfa0: 00000000 be07bfb0 8000ed10 80045858 00000000 00000000 00000000 00000000
      [ 8864.822723] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      [ 8864.830925] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5ffbb5f7 f9fcf5e7
      [ 8864.839115] Backtrace:
      [ 8864.841631] [<8057c1d0>] (gro_pull_from_frag0) from [<8057ebf0>] (dev_gro_receive+0x6c/0x3f8)
      [ 8864.850173]  r6:00000003 r5:bd8a0718 r4:bd280cc0 r3:00000000
      [ 8864.855958] [<8057eb84>] (dev_gro_receive) from [<8057f148>] (napi_gro_receive+0x28/0xac)
      [ 8864.864152]  r10:bd8a0000 r9:00000000 r8:0000001c r7:00000000 r6:bd8a0000 r5:bd280cc0
      [ 8864.872115]  r4:bd8a0718
      [ 8864.874713] [<8057f120>] (napi_gro_receive) from [<8044e7b4>] (fec_enet_rx_napi+0x414/0xc74)
      [ 8864.883167]  r5:00000000 r4:bf0810a0
      [ 8864.886823] [<8044e3a0>] (fec_enet_rx_napi) from [<8057fc98>] (net_rx_action+0x1dc/0x2ec)
      [ 8864.895016]  r10:be07bd00 r9:0000012c r8:be7c1ec0 r7:00000040 r6:000d1166 r5:00000001
      [ 8864.902982]  r4:bd8a0718
      [ 8864.905570] [<8057fabc>] (net_rx_action) from [<8002e690>] (__do_softirq+0x138/0x2c4)
      [ 8864.913417]  r10:00200100 r9:809c6088 r8:40000001 r7:809c6080 r6:00000003 r5:809c608c
      [ 8864.921382]  r4:00000020
      [ 8864.923966] [<8002e558>] (__do_softirq) from [<8002eb64>] (irq_exit+0xc4/0x138)
      [ 8864.931289]  r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:809c6af8 r5:00000000
      [ 8864.939252]  r4:809c0d7c
      [ 8864.941841] [<8002eaa0>] (irq_exit) from [<8006f100>] (__handle_domain_irq+0x74/0xe8)
      [ 8864.949688]  r4:809c0d7c r3:00000125
      [ 8864.953342] [<8006f08c>] (__handle_domain_irq) from [<800087a0>] (gic_handle_irq+0x28/0x68)
      [ 8864.961707]  r9:00000000 r8:00000002 r7:c080e100 r6:809c6c6c r5:be07bde8 r4:c080e10c
      [ 8864.969597] [<80008778>] (gic_handle_irq) from [<800133a4>] (__irq_svc+0x44/0x5c)
      [ 8864.977097] Exception stack(0xbe07bde8 to 0xbe07be30)
      [ 8864.982173] bde0:                   00000001 00000001 00000000 00000000 be7c1680 00000000
      [ 8864.990377] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30
      [ 8864.998573] be20: 8006278c 806f2934 20000013 ffffffff
      [ 8865.003638]  r7:be07be1c r6:ffffffff r5:20000013 r4:806f2934
      [ 8865.009447] [<806f2904>] (_raw_spin_unlock_irq) from [<80049cfc>] (finish_task_switch+0xa0/0x160)
      [ 8865.018334]  r4:be7c1680 r3:be069380
      [ 8865.021993] [<80049c5c>] (finish_task_switch) from [<806ed614>] (__schedule+0x1e0/0x5dc)
      [ 8865.030098]  r8:be0cfe00 r7:bd23b600 r6:be069380 r5:be3289c0 r4:be7c1680
      [ 8865.036942] [<806ed434>] (__schedule) from [<806edd0c>] (preempt_schedule_common+0x28/0x44)
      [ 8865.045307]  r9:00000000 r8:809d4598 r7:00000001 r6:00000000 r5:be035740 r4:be07a000
      [ 8865.053197] [<806edce4>] (preempt_schedule_common) from [<806edd68>] (_cond_resched+0x40/0x48)
      [ 8865.061822]  r4:be07a000 r3:be07a000
      [ 8865.065472] [<806edd28>] (_cond_resched) from [<8002e860>] (run_ksoftirqd+0x44/0x64)
      [ 8865.073252] [<8002e81c>] (run_ksoftirqd) from [<800494b0>] (smpboot_thread_fn+0x124/0x190)
      [ 8865.081550] [<8004938c>] (smpboot_thread_fn) from [<80045928>] (kthread+0xdc/0xf8)
      [ 8865.089133]  r10:00000000 r9:00000000 r8:00000000 r7:8004938c r6:be035740 r5:be035780
      [ 8865.097097]  r4:00000000 r3:be069380
      [ 8865.100752] [<8004584c>] (kthread) from [<8000ed10>] (ret_from_fork+0x14/0x24)
      [ 8865.107990]  r7:00000000 r6:00000000 r5:8004584c r4:be035780
      [ 8865.113767] Code: e320f000 e4913004 e4914004 e4915004 (e4916004)
      [ 8865.120006] ---[ end trace b0a4c6bd499288ca ]---
      [ 8865.124697] Kernel panic - not syncing: Fatal exception in interrupt
      [ 8865.131084] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
      
      Cc: [v3.19+] stable@vger.kernel.org
      Tested-by: default avatarPeter Chen <peter.chen@freescale.com>
      Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
      Signed-off-by: default avatarFugang Duan <B38611@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61615cd2
    • David S. Miller's avatar
      Merge branch 'xgene' · 485acc2c
      David S. Miller authored
      Iyappan Subramanian says:
      
      ====================
      drivers: net: xgene: Fix backward compatibility of newer firmware with older kernel
      
      Kernel 3.17 driver supports only RGMII ethernet interface.
      Since the Tianocore DT contains same compatibility string for RGMII,
      SGMII based 1G and XFI based 10G interfaces, crash happens when probe called
      on SGMII based 1G and XFI based 10G interface.
      
      This patch fixes the backward compatibility of the older driver with the
      newer firmware by making the binding unique so that the older driver won't
      recognize the non-supported interfaces.
      
      v2: Address comments from v1
      * updated cover letter subject line with net: xgene
      * Documentation: formatted compatible string values as list
      
      v1:
      * Initial version
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      485acc2c
    • Iyappan Subramanian's avatar
      drivers: net: xgene: fix new firmware backward compatibility with older driver · ecadf4e7
      Iyappan Subramanian authored
      This patch fixes the backward compatibile of the older driver with the
      newer firmware by making the binding unique so that the older driver won't
      recognize the non-supported interfaces.
      Signed-off-by: default avatarIyappan Subramanian <isubramanian@apm.com>
      Signed-off-by: default avatarKeyur Chudgar <kchudgar@apm.com>
      Tested-by: default avatarMark Langsdorf <mlangsdo@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ecadf4e7
    • Iyappan Subramanian's avatar
      dtb: change binding name to match with newer firmware DT · 2a91eb72
      Iyappan Subramanian authored
      This patch fixes the backward compatibility of the older driver with the
      newer firmware by making the binding unique so that the older driver won't
      recognize the non-supported interfaces.
      
      The new bindings are in sync with the newer firmware.
      Signed-off-by: default avatarIyappan Subramanian <isubramanian@apm.com>
      Signed-off-by: default avatarKeyur Chudgar <kchudgar@apm.com>
      Tested-by: default avatarMark Langsdorf <mlangsdo@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a91eb72
    • Iyappan Subramanian's avatar
    • Lorenzo Colitti's avatar
      net: ping: Return EAFNOSUPPORT when appropriate. · 9145736d
      Lorenzo Colitti authored
      1. For an IPv4 ping socket, ping_check_bind_addr does not check
         the family of the socket address that's passed in. Instead,
         make it behave like inet_bind, which enforces either that the
         address family is AF_INET, or that the family is AF_UNSPEC and
         the address is 0.0.0.0.
      2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL
         if the socket family is not AF_INET6. Return EAFNOSUPPORT
         instead, for consistency with inet6_bind.
      3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT
         instead of EINVAL if an incorrect socket address structure is
         passed in.
      4. Make IPv6 ping sockets be IPv6-only. The code does not support
         IPv4, and it cannot easily be made to support IPv4 because
         the protocol numbers for ICMP and ICMPv6 are different. This
         makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead
         of making the socket unusable.
      
      Among other things, this fixes an oops that can be triggered by:
      
          int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP);
          struct sockaddr_in6 sin6 = {
              .sin6_family = AF_INET6,
              .sin6_addr = in6addr_any,
          };
          bind(s, (struct sockaddr *) &sin6, sizeof(sin6));
      
      Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241
      Signed-off-by: default avatarLorenzo Colitti <lorenzo@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9145736d
    • Nicolas Schichan's avatar
      bcm63xx_enet: fix poll callback. · cd33ccf5
      Nicolas Schichan authored
      In case there was some tx buffer reclaimed and not enough rx packets
      to consume the whole budget, napi_complete would not be called and
      interrupts would be kept disabled, effectively resulting in the
      network core never to call the poll callback again and no rx/tx
      interrupts to be fired either.
      
      Fix that by only accounting the rx work done in the poll callback.
      Signed-off-by: default avatarNicolas Schichan <nschichan@freebox.fr>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd33ccf5
    • Alexey Brodkin's avatar
      stmmac: check IRQ availability early on probe · 8f02d8da
      Alexey Brodkin authored
      Currently we're getting IRQs after lots of resources are already
      allocated:
       * netdev
       * clocks
       * MDIO bus
      Also HW gets initialized by the time when checking IRQs as well.
      
      Now there's a possibility for master interrupt controller to be not
      probed yet. This will lead to exit from GMAC probe routine with "-
      EPROBE_DEFER" and so deferred probe will hapen later on.
      
      But since we exited the first GMAC probe without release of all
      allocated resources there could be conflicts on subsequent probes.
      
      For example this is what happens for me:
       --->8---
       stmmaceth e0018000.ethernet: no reset control found
       stmmac - user ID: 0x10, Synopsys ID: 0x37
        Ring mode enabled
        DMA HW capability register supported
        Normal descriptors
        RX Checksum Offload Engine supported (type 2)
        TX Checksum insertion supported
        Enable RX Mitigation via HW Watchdog Timer
       libphy: stmmac: probed
       eth0: PHY ID 20005c7a at 1 IRQ POLL (stmmac-0:01) active
       platform e0018000.ethernet: Driver stmmaceth requests probe deferral
       ...
       ...
       ...
       stmmaceth e0018000.ethernet: no reset control found
       stmmac - user ID: 0x10, Synopsys ID: 0x37
        Ring mode enabled
        DMA HW capability register supported
        Normal descriptors
        RX Checksum Offload Engine supported (type 2)
        TX Checksum insertion supported
        Enable RX Mitigation via HW Watchdog Timer
       ------------[ cut here ]------------
       WARNING: CPU: 0 PID: 6 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x4e/0x68()
       sysfs: cannot create duplicate filename
      '/devices/platform/axs10x_mb/e0018000.ethernet/mdio_bus/stmmac-0'
       CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.0.0-rc1-next-20150303+#8
       Workqueue: deferwq deferred_probe_work_func
      
       Stack Trace:
        arc_unwind_core+0xb8/0x114
        warn_slowpath_common+0x5a/0x8c
        warn_slowpath_fmt+0x2e/0x38
        sysfs_warn_dup+0x4e/0x68
        sysfs_create_dir_ns+0x98/0xa0
        kobject_add_internal+0x8c/0x2e8
        kobject_add+0x4a/0x8c
        device_add+0xc6/0x448
        mdiobus_register+0x6c/0x164
        stmmac_mdio_register+0x112/0x264
        stmmac_dvr_probe+0x6c0/0x85c
        stmmac_pltfr_probe+0x2e4/0x50c
        platform_drv_probe+0x26/0x5c
        really_probe+0x76/0x1dc
        bus_for_each_drv+0x42/0x7c
        device_attach+0x64/0x6c
        bus_probe_device+0x74/0xa4
        deferred_probe_work_func+0x50/0x84
        process_one_work+0xf8/0x2cc
        worker_thread+0x110/0x478
        kthread+0x8a/0x9c
        ret_from_fork+0x14/0x18
       ---[ end trace a2dfaa7d630c8be1 ]---
       ------------[ cut here ]------------
       WARNING: CPU: 0 PID: 6 at lib/kobject.c:240
      kobject_add_internal+0x218/0x2e8()
       kobject_add_internal failed for stmmac-0 with -EEXIST, don't try to
      register things with the same name in the same di.
       CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G        W
      4.0.0-rc1-next-20150303+ #8
       Workqueue: deferwq deferred_probe_work_func
      
       Stack Trace:
        arc_unwind_core+0xb8/0x114
        warn_slowpath_common+0x5a/0x8c
        warn_slowpath_fmt+0x2e/0x38
        kobject_add_internal+0x218/0x2e8
        kobject_add+0x4a/0x8c
        device_add+0xc6/0x448
        mdiobus_register+0x6c/0x164
        stmmac_mdio_register+0x112/0x264
        stmmac_dvr_probe+0x6c0/0x85c
        stmmac_pltfr_probe+0x2e4/0x50c
        platform_drv_probe+0x26/0x5c
        really_probe+0x76/0x1dc
        bus_for_each_drv+0x42/0x7c
        device_attach+0x64/0x6c
        bus_probe_device+0x74/0xa4
        deferred_probe_work_func+0x50/0x84
        process_one_work+0xf8/0x2cc
        worker_thread+0x110/0x478
        kthread+0x8a/0x9c
        ret_from_fork+0x14/0x18
       ---[ end trace a2dfaa7d630c8be2 ]---
       libphy: mii_bus stmmac-0 failed to register
       : Cannot register as MDIO bus
       stmmac_pltfr_probe: main driver probe failed
       stmmaceth: probe of e0018000.ethernet failed with error -22
       --->8---
      
      Essential fix is to check for IRQs availability as early as possible and
      then safely go to deferred probe if IRQs are not there yet.
      Signed-off-by: default avatarAlexey Brodkin <abrodkin@synopsys.com>
      Cc: Vineet Gupta <vgupta@synopsys.com>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
      Cc: Sonic Zhang <sonic.zhang@analog.com>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f02d8da
    • Linus Torvalds's avatar
      Merge tag 'dma-buf-for-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf · 6587457b
      Linus Torvalds authored
      Pull dma-buf fixes from Sumit Semwal:
       "Minor timeout & other fixes on reservation/fence"
      
      * tag 'dma-buf-for-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
        reservation: Remove shadowing local variable 'ret'
        dma-buf/fence: don't wait when specified timeout is zero
        reservation: wait only with non-zero timeout specified (v3)
      6587457b
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/virt/kvm/kvm · b8e81a3b
      Linus Torvalds authored
      Pull KVM fixes from Marcelo Tosatti:
       "KVM bug fixes, including a SVM interrupt injection regression fix,
        MIPS and ARM bug fixes"
      
      * git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: MIPS: Enable after disabling interrupt
        KVM: MIPS: Fix trace event to save PC directly
        KVM: SVM: fix interrupt injection (apic->isr_count always 0)
        KVM: emulate: fix CMPXCHG8B on 32-bit hosts
        KVM: VMX: fix build without CONFIG_SMP
        arm/arm64: KVM: Add exit reaons to kvm_exit event tracing
        ARM: KVM: Fix size check in __coherent_cache_guest_page
      b8e81a3b
    • Linus Torvalds's avatar
      Merge tag 'arc-4.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc · f2cb4777
      Linus Torvalds authored
      Pull ARC fixes from Vineet Gupta:
       - Fix for /proc/<pid>/maps "stack" vma annotation
       - sched stats not printing correct sleeping task PC
       - perf not reporting page faults
      
      * tag 'arc-4.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
        ARC: Fix thread_saved_pc()
        ARC: Fix KSTK_ESP()
        ARC: perf: Enable generic software events
        ARC: Make arc_unwind_core accessible externally
      f2cb4777
    • Linus Torvalds's avatar
      Merge tag 'powerpc-4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux · 97754e3c
      Linus Torvalds authored
      Pull powerpc fixes from Michael Ellerman:
       - Fix for dynticks.
       - Fix for smpboot bug.
       - Fix for IOMMU group refcounting.
      
      * tag 'powerpc-4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
        powerpc/iommu: Remove IOMMU device references via bus notifier
        powerpc/smp: Wait until secondaries are active & online
        powerpc: Re-enable dynticks
      97754e3c
    • Nishanth Aravamudan's avatar
      powerpc/iommu: Remove IOMMU device references via bus notifier · 4ad04e59
      Nishanth Aravamudan authored
      After d905c5df ("PPC: POWERNV: move iommu_add_device earlier"), the
      refcnt on the kobject backing the IOMMU group for a PCI device is
      elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
      set_iommu_table_base_and_group). When we go to dlpar a multi-function
      PCI device out:
      
              iommu_reconfig_notifier ->
                      iommu_free_table ->
                              iommu_group_put
                              BUG_ON(tbl->it_group)
      
      We trip this BUG_ON, because there are still references on the table, so
      it is not freed. Fix this by moving the powernv bus notifier to common
      code and calling it for both powernv and pseries.
      
      Fixes: d905c5df ("PPC: POWERNV: move iommu_add_device earlier")
      Signed-off-by: default avatarNishanth Aravamudan <nacc@linux.vnet.ibm.com>
      Tested-by: default avatarNishanth Aravamudan <nacc@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      4ad04e59
    • Michael Ellerman's avatar
      powerpc/smp: Wait until secondaries are active & online · 875ebe94
      Michael Ellerman authored
      Anton has a busy ppc64le KVM box where guests sometimes hit the infamous
      "kernel BUG at kernel/smpboot.c:134!" issue during boot:
      
        BUG_ON(td->cpu != smp_processor_id());
      
      Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops
      output confirms it:
      
        CPU: 0
        Comm: watchdog/130
      
      The problem is that we aren't ensuring the CPU active bit is set for the
      secondary before allowing the master to continue on. The master unparks
      the secondary CPU's kthreads and the scheduler looks for a CPU to run
      on. It calls select_task_rq() and realises the suggested CPU is not in
      the cpus_allowed mask. It then ends up in select_fallback_rq(), and
      since the active bit isnt't set we choose some other CPU to run on.
      
      This seems to have been introduced by 6acbfb96 "sched: Fix hotplug
      vs. set_cpus_allowed_ptr()", which changed from setting active before
      online to setting active after online. However that was in turn fixing a
      bug where other code assumed an active CPU was also online, so we can't
      just revert that fix.
      
      The simplest fix is just to spin waiting for both active & online to be
      set. We already have a barrier prior to set_cpu_online() (which also
      sets active), to ensure all other setup is completed before online &
      active are set.
      
      Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()")
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      875ebe94
  2. 03 Mar, 2015 14 commits
    • Linus Torvalds's avatar
      Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linux · a6c5170d
      Linus Torvalds authored
      Pull nfsd fixes from Bruce Fields:
       "Three miscellaneous bugfixes, most importantly the clp->cl_revoked
        bug, which we've seen several reports of people hitting"
      
      * 'for-4.0' of git://linux-nfs.org/~bfields/linux:
        sunrpc: integer underflow in rsc_parse()
        nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
        svcrpc: fix memory leak in gssp_accept_sec_context_upcall
      a6c5170d
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 789d7f60
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) If an IPVS tunnel is created with a mixed-family destination
          address, it cannot be removed.  Fix from Alexey Andriyanov.
      
       2) Fix module refcount underflow in netfilter's nft_compat, from Pablo
          Neira Ayuso.
      
       3) Generic statistics infrastructure can reference variables sitting on
          a released function stack, therefore use dynamic allocation always.
          Fix from Ignacy Gawędzki.
      
       4) skb_copy_bits() return value test is inverted in ip_check_defrag().
      
       5) Fix network namespace exit in openvswitch, we have to release all of
          the per-net vports.  From Pravin B Shelar.
      
       6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter.
      
       7) Fix rhashtable grow/shrink behavior, only expand during inserts and
          shrink during deletes.  From Daniel Borkmann.
      
       8) Netdevice names with semicolons should never be allowed, because
          they serve as a separator.  From Matthew Thode.
      
       9) Use {,__}set_current_state() where appropriate, from Fabian
          Frederick.
      
      10) Revert byte queue limits support in r8169 driver, it's causing
          regressions we can't figure out.
      
      11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to
          measure packets in flight, properly use tcp_packets_in_flight()
          instead.  From Neal Cardwell.
      
      12) Fix accidental removal of support for bluetooth in CSR based Intel
          wireless cards.  From Marcel Holtmann.
      
      13) We accidently added a behavioral change between native and compat
          tasks, wrt testing the MSG_CMSG_COMPAT bit.  Just ignore it if the
          user happened to set it in a native binary as that was always the
          behavior we had.  From Catalin Marinas.
      
      14) Check genlmsg_unicast() return valud in hwsim netlink tx frame
          handling, from Bob Copeland.
      
      15) Fix stale ->radar_required setting in mac80211 that can prevent
          starting new scans, from Eliad Peller.
      
      16) Fix memory leak in nl80211 monitor, from Johannes Berg.
      
      17) Fix race in TX index handling in xen-netback, from David Vrabel.
      
      18) Don't enable interrupts in amx-xgbe driver until all software et al.
          state is ready for the interrupt handler to run.  From Thomas
          Lendacky.
      
      19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric
          W Biederman.
      
      20) The amount of header space needed in macvtap was not calculated
          properly, fix it otherwise we splat past the beginning of the
          packet.  From Eric Dumazet.
      
      21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin.
      
      22) Don't raw initialize or mod timers, use setup_timer() and
          mod_timer() instead.  From Vaishali Thakkar.
      
      23) Fix software maintained statistics in bcmgenet and systemport
          drivers, from Florian Fainelli.
      
      24) DMA descriptor updates in sh_eth need proper memory barriers, from
          Ben Hutchings.
      
      25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal
          Kubecek.
      
      26) Openvswitch's non-masked set actions aren't constructed properly
          into netlink messages, fix from Joe Stringer.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
        openvswitch: Fix serialization of non-masked set actions.
        gianfar: Reduce logging noise seen due to phy polling if link is down
        ibmveth: Add function to enable live MAC address changes
        net: bridge: add compile-time assert for cb struct size
        udp: only allow UFO for packets from SOCK_DGRAM sockets
        sh_eth: Really fix padding of short frames on TX
        Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790"
        sh_eth: Fix RX recovery on R-Car in case of RX ring underrun
        sh_eth: Ensure proper ordering of descriptor active bit write/read
        net/mlx4_en: Disbale GRO for incoming loopback/selftest packets
        net/mlx4_core: Fix wrong mask and error flow for the update-qp command
        net: systemport: fix software maintained statistics
        net: bcmgenet: fix software maintained statistics
        rxrpc: don't multiply with HZ twice
        rxrpc: terminate retrans loop when sending of skb fails
        net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface.
        net: pasemi: Use setup_timer and mod_timer
        net: stmmac: Use setup_timer and mod_timer
        net: 8390: axnet_cs: Use setup_timer and mod_timer
        net: 8390: pcnet_cs: Use setup_timer and mod_timer
        ...
      789d7f60
    • Joe Stringer's avatar
      openvswitch: Fix serialization of non-masked set actions. · f4f8e738
      Joe Stringer authored
      Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside
      of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions
      back to regular set actions, the inner attribute length was not changed,
      ie, double the length being serialized. This patch fixes the bug.
      
      Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.")
      Signed-off-by: default avatarJoe Stringer <joestringer@nicira.com>
      Acked-by: default avatarJarno Rajahalme <jrajahalme@nicira.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f4f8e738
    • Guenter Roeck's avatar
      gianfar: Reduce logging noise seen due to phy polling if link is down · 0ae93b2c
      Guenter Roeck authored
      Commit 6ce29b0e ("gianfar: Avoid unnecessary reg accesses in adjust_link()")
      eliminates unnecessary calls to adjust_link for phy devices which don't support
      interrupts and need polling. As part of that work, the 'new_state' local flag,
      which was used to reduce logging noise on the console, was eliminated.
      
      Unfortunately, that means that a 'Link is Down' log message will now be
      issued continuously if a link is configured as UP, the link state is down,
      and the associated phy requires polling. This occurs because priv->oldduplex
      is -1 in this case, which always differs from phydev->duplex. In addition,
      phydev->speed may also differ from priv->oldspeed.  gfar_update_link_state()
      is therefore called each time a phy is polled, even if the link state did not
      change.
      
      Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Reviewed-by: default avatarClaudiu Manoil <claudiu.manoil@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0ae93b2c
    • Thomas Falcon's avatar
      ibmveth: Add function to enable live MAC address changes · c77c761f
      Thomas Falcon authored
      Add a function that will enable changing the MAC address
      of an ibmveth interface while it is still running.
      Signed-off-by: default avatarThomas Falcon <tlfalcon@linux.vnet.ibm.com>
      Reviewed-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c77c761f
    • Florian Westphal's avatar
      net: bridge: add compile-time assert for cb struct size · 71e168b1
      Florian Westphal authored
      make build fail if structure no longer fits into ->cb storage.
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      71e168b1
    • Linus Torvalds's avatar
      Linux 4.0-rc2 · 13a7a6ac
      Linus Torvalds authored
      13a7a6ac
    • Daniel Vetter's avatar
      drm/i915: Fix modeset state confusion in the load detect code · 9128b040
      Daniel Vetter authored
      This is a tricky story of the new atomic state handling and the legacy
      code fighting over each another. The bug at hand is an underrun of the
      framebuffer reference with subsequent hilarity caused by the load
      detect code. Which is peculiar since the the exact same code works
      fine as the implementation of the legacy setcrtc ioctl.
      
      Let's look at the ingredients:
      
      - Currently our code is a crazy mix of legacy modeset interfaces to
        set the parameters and half-baked atomic state tracking underneath.
        While this transition is going we're using the transitional plane
        helpers to update the atomic side (drm_plane_helper_disable/update
        and friends), i.e. plane->state->fb. Since the state structure owns
        the fb those functions take care of that themselves.
      
        The legacy state (specifically crtc->primary->fb) is still managed
        by the old code (and mostly by the drm core), with the fb reference
        counting done by callers (core drm for the ioctl or the i915 load
        detect code). The relevant commit is
      
        commit ea2c67bb
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Tue Dec 23 10:41:52 2014 -0800
      
            drm/i915: Move to atomic plane helpers (v9)
      
      - drm_plane_helper_disable has special code to handle multiple calls
        in a row - it checks plane->crtc == NULL and bails out. This is to
        match the proper atomic implementation which needs the crtc to get
        at the implied locking context atomic updates always need. See
      
        commit acf24a39
        Author: Daniel Vetter <daniel.vetter@ffwll.ch>
        Date:   Tue Jul 29 15:33:05 2014 +0200
      
            drm/plane-helper: transitional atomic plane helpers
      
      - The universal plane code split out the implicit primary plane from
        the CRTC into it's own full-blown drm_plane object. As part of that
        the setcrtc ioctl (which updated both the crtc mode and primary
        plane) learned to set crtc->primary->crtc on modeset to make sure
        the plane->crtc assignments statate up to date in
      
        commit e13161af
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Tue Apr 1 15:22:38 2014 -0700
      
            drm: Add drm_crtc_init_with_planes() (v2)
      
        Unfortunately we've forgotten to update the load detect code. Which
        wasn't a problem since the load detect modeset is temporary and
        always undone before we drop the locks.
      
      - Finally there is a organically grown history (i.e. don't ask) around
        who sets the legacy plane->fb for the various driver entry points.
        Originally updating that was the drivers duty, but for almost all
        places we've moved that (plus updating the refcounts) into the core.
        Again the exception is the load detect code.
      
      Taking all together the following happens:
      - The load detect code doesn't set crtc->primary->crtc. This is only
        really an issue on crtcs never before used or when userspace
        explicitly disabled the primary plane.
      
      - The plane helper glue code short-circuits because of that and leaves
        a non-NULL fb behind in plane->state->fb and plane->fb. The state
        fb isn't a real problem (it's properly refcounted on its own), it's
        just the canary.
      
      - Load detect code drops the reference for that fb, but doesn't set
        plane->fb = NULL. This is ok since it's still living in that old
        world where drivers had to clear the pointer but the core/callers
        handled the refcounting.
      
      - On the next modeset the drm core notices plane->fb and takes care of
        refcounting it properly by doing another unref. This drops the
        refcount to zero, leaving state->plane now pointing at freed memory.
      
      - intel_plane_duplicate_state still assume it owns a reference to that
        very state->fb and bad things start to happen.
      
      Fix this all by applying the same duct-tape as for the legacy setcrtc
      ioctl code and set crtc->primary->crtc properly.
      
      Cc: Matt Roper <matthew.d.roper@intel.com>
      Cc: Paul Bolle <pebolle@tiscali.nl>
      Cc: Rob Clark <robdclark@gmail.com>
      Cc: Paulo Zanoni <przanoni@gmail.com>
      Cc: Sean Paul <seanpaul@chromium.org>
      Cc: Matt Roper <matthew.d.roper@intel.com>
      Reported-and-tested-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Reported-by: default avatarPaul Bolle <pebolle@tiscali.nl>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9128b040
    • Michal Kubeček's avatar
      udp: only allow UFO for packets from SOCK_DGRAM sockets · acf8dd0a
      Michal Kubeček authored
      If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
      UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to
      CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
      checksum is to be computed on segmentation. However, in this case,
      skb->csum_start and skb->csum_offset are never set as raw socket
      transmit path bypasses udp_send_skb() where they are usually set. As a
      result, driver may access invalid memory when trying to calculate the
      checksum and store the result (as observed in virtio_net driver).
      
      Moreover, the very idea of modifying the userspace provided UDP header
      is IMHO against raw socket semantics (I wasn't able to find a document
      clearly stating this or the opposite, though). And while allowing
      CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
      too intrusive change just to handle a corner case like this. Therefore
      disallowing UFO for packets from SOCK_DGRAM seems to be the best option.
      Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      acf8dd0a
    • David S. Miller's avatar
      Merge branch 'sh_eth' · 096b1c17
      David S. Miller authored
      Ben Hutchings says:
      
      ====================
      Fixes for sh_eth #4 v2
      
      I'm continuing review and testing of Ethernet support on the R-Car H2
      chip, with help from a colleague.  This series fixes a few more issues.
      
      These are not tested on any of the other supported chips.
      
      v2: Add note that the revert is not a pure revert.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      096b1c17
    • Ben Hutchings's avatar
      sh_eth: Really fix padding of short frames on TX · dacc73e0
      Ben Hutchings authored
      My previous fix to clear padding of short frames used skb->len as the
      DMA length, assuming that skb_padto() extended skb->len to include the
      padding.  That isn't the case; we need to use skb_put_padto() instead.
      
      (This wasn't immediately obvious because software padding isn't
      actually needed on the R-Car H2.  We could make it conditional on
      which chip is being driven, but it's probably not worth the effort.)
      Reported-by: default avatar"Violeta Menéndez González" <violeta.menendez@codethink.co.uk>
      Fixes: 612a17a54b50 ("sh_eth: Fix padding of short frames on TX")
      Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dacc73e0
    • Ben Hutchings's avatar
      Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" · 9b4a6364
      Ben Hutchings authored
      This reverts commit fd9af07c.
      
      The hardware manual states that the frame error and multicast bits are
      copied to bits 9:0 of RD0, not bits 25:16.  I've tested that this is
      true for RFS1 (CRC error), RFS3 (frame too short), RFS4 (frame too
      long) and RFS8 (multicast).
      
      Also adjust a comment to agree with this.
      Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b4a6364
    • Ben Hutchings's avatar
      sh_eth: Fix RX recovery on R-Car in case of RX ring underrun · 6ded2865
      Ben Hutchings authored
      In case of RX ring underrun (RDE), we attempt to reset the software
      descriptor pointers (dirty_rx and cur_rx) to match where the hardware
      will read the next descriptor from, as that might not be the first
      dirty descriptor.  This relies on reading RDFAR, but that register
      doesn't exist on all supported chips - specifically, not on the R-Car
      chips.  This will result in unpredictable behaviour on those chips
      after an RDE.
      
      Make this pointer reset conditional and assume that it isn't needed on
      the R-Car chips.  This fix also assumes that RDFAR is never exposed at
      offset 0 in the memory map - this is currently true, and a subsequent
      commit will fix the ambiguity between offset 0 and no-offset in the
      register offset maps.
      
      Fixes: 79fba9f5 ("net: sh_eth: fix the rxdesc pointer when rx ...")
      Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ded2865
    • Ben Hutchings's avatar
      sh_eth: Ensure proper ordering of descriptor active bit write/read · 7d7355f5
      Ben Hutchings authored
      When submitting a DMA descriptor, the active bit must be written last.
      When reading a completed DMA descriptor, the active bit must be read
      first.
      
      Add memory barriers to ensure that this ordering is maintained.
      Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d7355f5
  3. 02 Mar, 2015 10 commits
  4. 01 Mar, 2015 2 commits