- 20 Mar, 2018 6 commits
-
-
Christoph Hellwig authored
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Christoph Hellwig authored
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by:
-
Christoph Hellwig authored
These drivers haven't seen any recent bug fixing and are two of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by:
-
Christoph Hellwig authored
Convert the driver to modern style probing. Given that there only is a single instance for a given board that can be done using a global struct Scsi_Host instance easily. Also fix the removal path by passing the correct cookie to free_irq, and enable it unconditionally. Signed-off-by:
-
Christoph Hellwig authored
esas2r has been converted to hotplug style initialization long ago, but kept various remant of the old-style scsi_module.c initialization around. Remove those. Signed-off-by:
-
Christoph Hellwig authored
This function is only used inside the SCSI midlayer, so remove the export for it. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
- 15 Mar, 2018 10 commits
-
-
Varun Prakash authored
32 bit port capabilities are required to support new speeds which can not be supported using 16 bit port capabilities. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Stephen Kitt authored
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. bfad_bsg.c uses a variable-length array declaration to measure the size of a putative array; this can be replaced by the product of the size of an element and the number of elements, avoiding the VLA altogether. This was prompted by https://lkml.org/lkml/2018/3/7/621Signed-off-by:
Stephen Kitt <steve@sk2.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Stephen Kitt authored
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. The arrays fixed here, using the number of constant sections, aren't really VLAs, but they appear so to the compiler. Replace the array sizes with a pre-processor-level constant instead using ARRAY_SIZE. This was prompted by https://lkml.org/lkml/2018/3/7/621Signed-off-by:
-
John Pittman authored
In the comment for function alua_alloc_pg() the argument '@h' is mistakenly referred to. Fix this by replacing it with the correct argument reference, '@tpgs', and provide a short description. Signed-off-by:
John Pittman <jpittman@redhat.com> Reviewed-by Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
This 20+ year old changelog has no useful information for kernel development or users, so remove it. Signed-off-by:
-
Christoph Hellwig authored
aha1740 doesn't use scsi_register, so it should not use scsi_unregister either. Signed-off-by:
-
Christoph Hellwig authored
Since moving away from using scsi_module.c these were never called. The implementations are called directly, though so they remain. Signed-off-by:
-
Christoph Hellwig authored
dpt_i2o doesn't use scsi_register, so it should not use scsi_unregister either. Also refactor the module exit path to make a little more sense. Signed-off-by:
-
Martin K. Petersen authored
These two drivers do not appear to be in active use. Deprecate them. Suggested-by:
-
Colin Ian King authored
There are several unions that are local to the source and do not need to be in global scope, so make them static. Also add in a missing void parameter to functions lpfc_nvme_cmd_template and lpfc_nvmet_cmd_template to clean up non-ANSI warning. Cleans up sparse warnings: drivers/scsi/lpfc/lpfc_nvme.c:68:19: warning: symbol 'lpfc_iread_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:69:19: warning: symbol 'lpfc_iwrite_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:70:19: warning: symbol 'lpfc_icmnd_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:74:24: warning: non-ANSI function 'lpfc_tsend_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:78:19: warning: symbol 'lpfc_treceive_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:79:19: warning: symbol 'lpfc_trsp_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:83:25: warning: non-ANSI function declaration of function 'lpfc_nvmet_cmd_template' Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
- 13 Mar, 2018 24 commits
-
-
Stephen Kitt authored
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. scsi_dh_{alua,emc,rdac} use variable-length array declarations to store command blocks, with the appropriate size as determined by COMMAND_SIZE. This patch replaces these with fixed-sized arrays using MAX_COMMAND_SIZE, so that the array size can be determined at compile time. This was prompted by https://lkml.org/lkml/2018/3/7/621Signed-off-by:Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Finn Thain authored
In jazz_esp and sun3x_esp, the esp_driver_ops methods pass esp->dev in dma api calls as if it was a pointer to a struct device. But it actually points to a struct platform_device. Fix this. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Xiang Chen authored
Export device table of v3 hw to userspace, or auto probe will fail for v3 hw. Also change the module alias to include "pci", instead of "platform". Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
Do some modifications for register configuring for hip08. In future, to reduce kernel churn with patches to modify registers, any registers which may change between board models (mostly PHY/SERDES related) should be set in ACPI reset handler. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiang Chen authored
The patch does some code cleanup and fixes some small bugs: - Correct return status of phy_up_v3_hw() and phy_bcast_v3_hw() - Add static for function phy_get_max_linkrate_v3_hw() - Change exception return status when no reset method - Change magic value to ts->stat in slot_complete_vx_hw() - Remove unnecessary check for dev_is_sata() - Fix some issues of alignment and indents (Authored by Xiaofei Tan in another patch, but added here to be practical) Signed-off-by:
-
Xiaofei Tan authored
It is an implicit regulation that error code that function returned should be negative. But hisi_sas_task_prep() doesn't follow this. This may cause problems in the upper layer code. For example, in sas_expander.c of libsas, smp_execute_task_sg() may return the number of bytes of underrun. It will be conflicted with the scenaio lldd_execute_task() return an positive error code. This patch change the return value from SAS_PHY_DOWN to -ECOMM in hisi_sas_task_prep(). Signed-off-by:
-
Xiang Chen authored
The structure element hisi_sas_devices.running_req to count how many commands are active is in effect only ever written in the code, so remove it. Signed-off-by:
-
Xiaofei Tan authored
The current 110ms expiry time is not long enough for the internal abort task. The reason is that the internal abort task could be blocked in HW if the HW is retrying to set up link. The internal abort task will be executed only when the retry process finished. The maximum time is 5s for the retry of setting up link. So, the timer expire should be more than 5s. This patch increases it from 110ms to 6s. Signed-off-by:
-
Xiaofei Tan authored
It is not right to set the register PROG_PHY_LINK_RATE while PHY is still enabled. So if we want to change PHY linkrate, we need to disable PHY before setting the register PROG_PHY_LINK_RATE, and then start-up PHY. This patch is to fix this issue. Signed-off-by:
-
Xiaofei Tan authored
In sysfs, there are two files about minimum linkrate, and also two files for maximum linkrate. Take maximum linkrate example, maximum_linkrate_hw is read-only and indicated by the register HARD_PHY_LINKRATE, and maximum_linkrate is read-write and corresponding to the register PROG_PHY_LINK_RATE. But in the function phy_up_v*_hw(), we get *_linkrate value from HARD_PHY_LINKRATE. It is not right. This patch is to fix this issue. Unreferenced PHY-interrupt enum is also removed for v3 hw. Signed-off-by:
-
Xiaofei Tan authored
The register SAS_PHY_CTRL is configured according to signal quality. The signal quality is calculated by signal attenuation of hardware physical link. It may be different for different PCB layout. So, in order to give better support to new board, this patch add support to reading the devicetree property, "hisilicon,signal-attenuation". Of course, we still keep an default value in driver to adapt old board. Signed-off-by:
-
Xiaofei Tan authored
For some new boards with hip07 chipset we are required to set PHY config registers differently. The hw property which determines how to set these registers is in the PHY signal attenuation readings. This patch add an devicetree property, "hisilicon,signal-attenuation", which is used to describe the signal attenuation of an board. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Douglas Gilbert authored
The SCSI PRE-FETCH (10 or 16) command is present both on hard disks and some SSDs. It is useful when the address of the next block(s) to be read is known but it is not following the LBA of the current READ (so read-ahead won't help). It returns two "good" SCSI Status values. If the requested blocks have fitted (or will most likely fit (when the IMMED bit is set)) into the disk's cache, it returns CONDITION MET. If it didn't (or will not) fit then it returns GOOD status. The goal of this patch is to stop the SCSI subsystem treating the CONDITION MET SCSI status as an error. The current state makes the PRE-FETCH command effectively unusable via pass-throughs. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
James Smart authored
Updated Copyright in files updated as part of 12.0.0.1 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
James Smart authored
Update the driver version to 12.0.0.1 Signed-off-by:
-
James Smart authored
The driver fails to allocate command buffers in the routine lpfc_new_scsi_buf_s4 There is an inconsistency between lpfc_mem_alloc(), where the phba->lpfc_sg_dma_buf_pool is created, and lpfc_new_scsi_buf_s4(), when we allocate a buffer from the pool and check the alignment. The alignment should be on a page boundary, based on LPFC_SLI3_BG_ENABLED in sli3_options, for both cases. Fix by explicitly tracking sli4 vs sli3 and BG options. The result is that phba->cfg_sg_dma_buf_size is now set correctly for SLI-4. Signed-off-by:
-
James Smart authored
POST_SGL_PAGES mailbox command failed with status (timeout). wait_event_interruptible_timeout when called from mailbox wait interface, gets interrupted, and will randomly fail. Behavior seems very specific to 1 particular server type. Fix by changing from wait_event_interruptible_timeout to wait_for_completion_timeout. Signed-off-by:
-
James Smart authored
When a port is configured for NVME and SCSI Initiator support and it probes a target supporting both SCSI and NVME, NVME devices are discovered, but SCSI devices are not. The nlp_fc4_type for all NPorts should be cleared on Link Up or just before GID_FTs get issued, as opposed to just during GID_FT cmpl. RSCN activity as well as Link Up can trigger GID_FT. One GID_FT may complete before the next one is issued. Fix by clearng nlp_fc4_type on link up and just before both GID_FTs are issued. During port swapping, copy nlp_fc4_type to the new ndlp Signed-off-by:
-
James Smart authored
To reduce latency when initializing WQE content, created templates for the most common wqes. This reduces the number of operations taken to set the content. It's not a lot of speed up, but every bit helps. This patch updates the NVME target path. [mkp: fixed typo] Signed-off-by:
-
James Smart authored
To reduce latency when initializing WQE content, create templates for the most common wqes. This reduces the number of operations taken to set the content. It's not a lot of speed up, but every bit helps. This patch updates the NVME initiator path. [mkp: fixed typo] Signed-off-by:
-
James Smart authored
The driver is very sloppy about the WQE structure passed between routines. The base struct type is a 64byte wqe. But in many routines they typecast and access 128byte wqes. There were a couple of cases in the past (corrected already) where the typecasts were incorrectly done and the 64byte buffer was accessed as a 128 byte buffer. Clean this up by properly declaring wqe's as 128byte wqe's and removing the typecasts. 64byte wqes are considered a subset of the 128byte wqes. Signed-off-by:
-
James Smart authored
First Burst support was not properly indicated in NVMe PRLI. Correct the bit position and the logic to check and set first burst support. Signed-off-by:
-
James Smart authored
Commit 6e8e1c14 ("scsi: lpfc: Add WQ Full Logic for NVME Target") fails the static checker. Checker correctly identified a missing unlock on a return path. Add the unlock. Fixes: 6e8e1c14 ("scsi: lpfc: Add WQ Full Logic for NVME Target") Signed-off-by:
-
Souptick Joarder authored
Use dma_pool_zalloc() instead of dma_pool_alloc + memset Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
