- 29 Dec, 2008 40 commits
-
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Need some thoughts, temporary for now .. Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
We need to check for tuner LOCK LOSS, especially in the case of simple PLL's Signed-off-by:
-
Manu Abraham authored
* Reduces szapping time a lot * increased stability at Low Symbol rates * overall increases reliability in tuning Signed-off-by:
-
Marko Schluessler authored
probably should stop fiddling with code late nights. :-( Thanks to Marco for pointing it out and fixing it. Signed-off-by:
Marko Schluessler <marco@lordzodiac.de> Signed-off-by:
-
Manu Abraham authored
V4L/DVB (9405): Practical tests show that the TT S2 3200 has I/Q inputs inverted, similar to the KNC1. Don't have this hardware and cannot verify this for myself, but from the reports this looks to be quite a reasonable and correct hypothesis. Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
This is a racy situation. Inversion is default OFF on the TT S2 3200 hardware, unlike the KNC1 where it is default Inverted Signed-off-by:
-
Manu Abraham authored
Use an enumeration for I/Q Swap rather than an int, easier to spot the nasty ones Signed-off-by:
-
Manu Abraham authored
The 2 callbacks created nothing more than confusion Signed-off-by:
-
Manu Abraham authored
Still messing up: * Cleanup * Use KNC1's default settings to startup with * Add in tuner wrapper calls Signed-off-by:
-
Marko Schluessler authored
Signed-off-by:
-
Manu Abraham authored
Fix bug obviously, some enhancements as well * enable i2c_gate before doing any transaction * read is one single message with 2 words * reduce sleep from 100mS to 20mS Signed-off-by:
-
Manu Abraham authored
Really silly! Disabled all clocks and expected it to run. Signed-off-by:
-
Manu Abraham authored
Add initial support for: * KNC1 DVB-S2 Plus * KNC1 DVB-S2 OEM (known as Satelco DVB-S2) Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Marko Schluessler authored
Signed-off-by:
-
Marko Schluessler authored
Signed-off-by:
-
Marko Schluessler authored
Signed-off-by:
-
Marko Schluessler authored
Signed-off-by:
-
Manu Abraham authored
Thanks to Marko Schluessler <marco@lordzodiac.de> for pointing it out Signed-off-by:
-
Manu Abraham authored
Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing it out Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
not limited in hardware, this causes instabilities at a higher clock due to issues such as thermal, also the divider wraps around, which causes the demodulator core to actually run at a lower frequency. This needs to be empirically tested whether it affects other cards. If found necessary, this parameter needs to be moved out to the config struct such that it can be made hardware dependant. Reducing the CLOCK from 99MHz to 90MHz improved the acquisition time taken on the KNC1 cards and hence such a change. Signed-off-by:
-
Manu Abraham authored
Thanks to Marko Schluessler <marco@lordzodiac.de> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
