- 31 May, 2014 40 commits
-
-
Bjørn Mork authored
[ Upstream commit aa3aba1c ] A standard Gobi 3000 reference design module. Reported-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
[ Upstream commit 5a008ffa ] The MC8305 module got an additional entry added based solely on information from a Windows driver *.inf file. We now have the actual descriptor layout from one of these modules, and it consists of two alternate configurations where cfg #1 is a normal Gobi 2k layout and cfg #2 is MBIM only, using interface numbers 5 and 6 for MBIM control and data. The extra Windows driver entry for interface number 5 was most likely a bug. Deleting the bogus entry to avoid unnecessary qmi_wwan probe failures when using the MBIM configuration. Reported-by:
Lana Black <sickmind@lavabit.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e33d0ba8 ] Recycling skb always had been very tough... This time it appears GRO layer can accumulate skb->truesize adjustments made by drivers when they attach a fragment to skb. skb_gro_receive() can only subtract from skb->truesize the used part of a fragment. I spotted this problem seeing TcpExtPruneCalled and TcpExtTCPRcvCollapsed that were unexpected with a recent kernel, where TCP receive window should be sized properly to accept traffic coming from a driver not overshooting skb->truesize. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit fbdc0ad0 ] the value of itag is a random value from stack, and may not be initiated by fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID is not set This will make the cached dst uncertainty Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Susant Sahani authored
[ Upstream commit c8965932 ] The function ip6_tnl_validate assumes that the rtnl attribute IFLA_IPTUN_PROTO always be filled . If this attribute is not filled by the userspace application kernel get crashed with NULL pointer dereference. This patch fixes the potential kernel crash when IFLA_IPTUN_PROTO is missing . Signed-off-by:
Susant Sahani <susant@redhat.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Peter Christensen authored
[ Upstream commit bbeb0ead ] Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti overflow on the underlying interface. Attempting the set IFF_ALLMULTI on the underlying interface would cause an error and the log message: "allmulti touches root, set allmulti failed." Signed-off-by:
Peter Christensen <pch@ordbogen.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 6b5eeb7f ] This driver maps 802.1q VLANs to MBIM sessions. The mapping is based on a bogus assumption that all tagged frames will use the acceleration API because we enable NETIF_F_HW_VLAN_CTAG_TX. This fails for e.g. frames tagged in userspace using packet sockets. Such frames will erroneously be considered as untagged and silently dropped based on not being IP. Fix by falling back to looking into the ethernet header for a tag if no accelerated tag was found. Fixes: a82c7ce5 ("net: cdc_ncm: map MBIM IPS SessionID to VLAN ID") Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by:
-
Sergey Popovich authored
[ Upstream commit aeefa1ec ] Increment fib_info_cnt in fib_create_info() right after successfuly alllocating fib_info structure, overwise fib_metrics allocation failure leads to fib_info_cnt incorrectly decremented in free_fib_info(), called on error path from fib_create_info(). Signed-off-by:
Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 418a3156 ] If conntrack defragments incoming ipv6 frags it stores largest original frag size in ip6cb and sets ->local_df. We must thus first test the largest original frag size vs. mtu, and not vice versa. Without this patch PKTTOOBIG is still generated in ip6_fragment() later in the stack, but 1) IPSTATS_MIB_INTOOBIGERRORS won't increment 2) packet did (needlessly) traverse netfilter postrouting hook. Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit ca6c5d4a ] local_df means 'ignore DF bit if set', so if its set we're allowed to perform ip fragmentation. This wasn't noticed earlier because the output path also drops such skbs (and emits needed icmp error) and because netfilter ip defrag did not set local_df until couple of days ago. Only difference is that DF-packets-larger-than MTU now discarded earlier (f.e. we avoid pointless netfilter postrouting trip). While at it, drop the repeated test ip_exceeds_mtu, checking it once is enough... Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by:
-
Liu Yu authored
[ Upstream commit 0cda345d ] commit b9f47a3a (tcp_cubic: limit delayed_ack ratio to prevent divide error) try to prevent divide error, but there is still a little chance that delayed_ack can reach zero. In case the param cnt get negative value, then ratio+cnt would overflow and may happen to be zero. As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero. In some old kernels, such as 2.6.32, there is a bug that would pass negative param, which then ultimately leads to this divide error. commit 5b35e1e6 (tcp: fix tcp_trim_head() to adjust segment count with skb MSS) fixed the negative param issue. However, it's safe that we fix the range of delayed_ack as well, to make sure we do not hit a divide by zero. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
Liu Yu <allanyuliu@tencent.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit f114890c ] This reverts commit 12a2856b. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Xufeng Zhang authored
[ Upstream commit 85350871 ] commit 813b3b5d (ipv4: Use caller's on-stack flowi as-is in output route lookups.) introduces another regression which is very similar to the problem of commit e6b45241 (ipv4: reset flowi parameters on route connect) wants to fix: Before we call ip_route_output_key() in sctp_v4_get_dst() to get a dst that matches a bind address as the source address, we have already called this function previously and the flowi parameters have been initialized including flowi4_oif, so when we call this function again, the process in __ip_route_output_key() will be different because of the setting of flowi4_oif, and we'll get a networking device which corresponds to the inputted flowi4_oif as the output device, this is wrong because we'll never hit this place if the previously returned source address of dst match one of the bound addresses. To reproduce this problem, a vlan setting is enough: # ifconfig eth0 up # route del default # vconfig add eth0 2 # vconfig add eth0 3 # ifconfig eth0.2 10.0.1.14 netmask 255.255.255.0 # route add default gw 10.0.1.254 dev eth0.2 # ifconfig eth0.3 10.0.0.14 netmask 255.255.255.0 # ip rule add from 10.0.0.14 table 4 # ip route add table 4 default via 10.0.0.254 src 10.0.0.14 dev eth0.3 # sctp_darn -H 10.0.0.14 -P 36422 -h 10.1.4.134 -p 36422 -s -I You'll detect that all the flow are routed to eth0.2(10.0.1.254). Signed-off-by:
Xufeng Zhang <xufeng.zhang@windriver.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 30313a3d ] When bridge device is created with IFLA_ADDRESS, we are not calling br_stp_change_bridge_id(), which leads to incorrect local fdb management and bridge id calculation, and prevents us from receiving frames on the bridge device. Reported-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Kumar Sundararajan authored
[ Upstream commit 1c265854 ] When the ipv6 fib changes during a table dump, the walk is restarted and the number of nodes dumped are skipped. But the existing code doesn't advance to the next node after a node is skipped. This can cause the dump to loop or produce lots of duplicates when the fib is modified during the dump. This change advances the walk to the next node if the current node is skipped after a restart. Signed-off-by:
Kumar Sundararajan <kumar@fb.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
David Gibson authored
[ Upstream commit c53864fd ] Since 115c9b81 (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
David Gibson authored
[ Upstream commit 973462bb ] Without IFLA_EXT_MASK specified, the information reported for a single interface in response to RTM_GETLINK is expected to fit within a netlink packet of NLMSG_GOODSIZE. If it doesn't, however, things will go badly wrong, When listing all interfaces, netlink_dump() will incorrectly treat -EMSGSIZE on the first message in a packet as the end of the listing and omit information for that interface and all subsequent ones. This can cause getifaddrs(3) to enter an infinite loop. This patch won't fix the problem, but it will WARN_ON() making it easier to track down what's going wrong. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Andrew Lutomirski authored
[ Upstream commit 78541c1d ] The caller needs capabilities on the namespace being queried, not on their own namespace. This is a security bug, although it likely has only a minor impact. Cc: stable@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit b14878cc ] Currently, it is possible to create an SCTP socket, then switch auth_enable via sysctl setting to 1 and crash the system on connect: Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.1-mipsgit-20140415 #1 task: ffffffff8056ce80 ti: ffffffff8055c000 task.ti: ffffffff8055c000 [...] Call Trace: [<ffffffff8043c4e8>] sctp_auth_asoc_set_default_hmac+0x68/0x80 [<ffffffff8042b300>] sctp_process_init+0x5e0/0x8a4 [<ffffffff8042188c>] sctp_sf_do_5_1B_init+0x234/0x34c [<ffffffff804228c8>] sctp_do_sm+0xb4/0x1e8 [<ffffffff80425a08>] sctp_endpoint_bh_rcv+0x1c4/0x214 [<ffffffff8043af68>] sctp_rcv+0x588/0x630 [<ffffffff8043e8e8>] sctp6_rcv+0x10/0x24 [<ffffffff803acb50>] ip6_input+0x2c0/0x440 [<ffffffff8030fc00>] __netif_receive_skb_core+0x4a8/0x564 [<ffffffff80310650>] process_backlog+0xb4/0x18c [<ffffffff80313cbc>] net_rx_action+0x12c/0x210 [<ffffffff80034254>] __do_softirq+0x17c/0x2ac [<ffffffff800345e0>] irq_exit+0x54/0xb0 [<ffffffff800075a4>] ret_from_irq+0x0/0x4 [<ffffffff800090ec>] rm7k_wait_irqoff+0x24/0x48 [<ffffffff8005e388>] cpu_startup_entry+0xc0/0x148 [<ffffffff805a88b0>] start_kernel+0x37c/0x398 Code: dd0900b8 000330f8 0126302d <dcc60000> 50c0fff1 0047182a a48306a0 03e00008 00000000 ---[ end trace b530b0551467f2fd ]--- Kernel panic - not syncing: Fatal exception in interrupt What happens while auth_enable=0 in that case is, that ep->auth_hmacs is initialized to NULL in sctp_auth_init_hmacs() when endpoint is being created. After that point, if an admin switches over to auth_enable=1, the machine can crash due to NULL pointer dereference during reception of an INIT chunk. When we enter sctp_process_init() via sctp_sf_do_5_1B_init() in order to respond to an INIT chunk, the INIT verification succeeds and while we walk and process all INIT params via sctp_process_param() we find that net->sctp.auth_enable is set, therefore do not fall through, but invoke sctp_auth_asoc_set_default_hmac() instead, and thus, dereference what we have set to NULL during endpoint initialization phase. The fix is to make auth_enable immutable by caching its value during endpoint initialization, so that its original value is being carried along until destruction. The bug seems to originate from the very first days. Fix in joint work with Daniel Borkmann. Reported-by:
Joshua Kinard <kumba@gentoo.org> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Tested-by:
-
Ivan Vecera authored
The patch fixes a problem with dropped jumbo frames after usage of 'ethtool -G ... rx'. Scenario: 1. ip link set eth0 up 2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo 3. ip link set mtu 9000 dev eth0 The ethtool command set rx_jumbo_pending to zero so any received jumbo packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N' to workaround the issue. The patch changes the logic so rx_jumbo_pending value is changed only if jumbo frames are enabled (MTU > 1500). Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
dingtianhong authored
[ Upstream commit dc8eaaa0 ] When I open the LOCKDEP config and run these steps: modprobe 8021q vconfig add eth2 20 vconfig add eth2.20 30 ifconfig eth2 xx.xx.xx.xx then the Call Trace happened: [32524.386288] ============================================= [32524.386293] [ INFO: possible recursive locking detected ] [32524.386298] 3.14.0-rc2-0.7-default+ #35 Tainted: G O [32524.386302] --------------------------------------------- [32524.386306] ifconfig/3103 is trying to acquire lock: [32524.386310] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386326] [32524.386326] but task is already holding lock: [32524.386330] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386341] [32524.386341] other info that might help us debug this: [32524.386345] Possible unsafe locking scenario: [32524.386345] [32524.386350] CPU0 [32524.386352] ---- [32524.386354] lock(&vlan_netdev_addr_lock_key/1); [32524.386359] lock(&vlan_netdev_addr_lock_key/1); [32524.386364] [32524.386364] *** DEADLOCK *** [32524.386364] [32524.386368] May be due to missing lock nesting notation [32524.386368] [32524.386373] 2 locks held by ifconfig/3103: [32524.386376] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81431d42>] rtnl_lock+0x12/0x20 [32524.386387] #1: (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386398] [32524.386398] stack backtrace: [32524.386403] CPU: 1 PID: 3103 Comm: ifconfig Tainted: G O 3.14.0-rc2-0.7-default+ #35 [32524.386409] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [32524.386414] ffffffff81ffae40 ffff8800d9625ae8 ffffffff814f68a2 ffff8800d9625bc8 [32524.386421] ffffffff810a35fb ffff8800d8a8d9d0 00000000d9625b28 ffff8800d8a8e5d0 [32524.386428] 000003cc00000000 0000000000000002 ffff8800d8a8e5f8 0000000000000000 [32524.386435] Call Trace: [32524.386441] [<ffffffff814f68a2>] dump_stack+0x6a/0x78 [32524.386448] [<ffffffff810a35fb>] __lock_acquire+0x7ab/0x1940 [32524.386454] [<ffffffff810a323a>] ? __lock_acquire+0x3ea/0x1940 [32524.386459] [<ffffffff810a4874>] lock_acquire+0xe4/0x110 [32524.386464] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386471] [<ffffffff814fc07a>] _raw_spin_lock_nested+0x2a/0x40 [32524.386476] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386481] [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386489] [<ffffffffa0500cab>] vlan_dev_set_rx_mode+0x2b/0x50 [8021q] [32524.386495] [<ffffffff8141addf>] __dev_set_rx_mode+0x5f/0xb0 [32524.386500] [<ffffffff8141af8b>] dev_set_rx_mode+0x2b/0x40 [32524.386506] [<ffffffff8141b3cf>] __dev_open+0xef/0x150 [32524.386511] [<ffffffff8141b177>] __dev_change_flags+0xa7/0x190 [32524.386516] [<ffffffff8141b292>] dev_change_flags+0x32/0x80 [32524.386524] [<ffffffff8149ca56>] devinet_ioctl+0x7d6/0x830 [32524.386532] [<ffffffff81437b0b>] ? dev_ioctl+0x34b/0x660 [32524.386540] [<ffffffff814a05b0>] inet_ioctl+0x80/0xa0 [32524.386550] [<ffffffff8140199d>] sock_do_ioctl+0x2d/0x60 [32524.386558] [<ffffffff81401a52>] sock_ioctl+0x82/0x2a0 [32524.386568] [<ffffffff811a7123>] do_vfs_ioctl+0x93/0x590 [32524.386578] [<ffffffff811b2705>] ? rcu_read_lock_held+0x45/0x50 [32524.386586] [<ffffffff811b39e5>] ? __fget_light+0x105/0x110 [32524.386594] [<ffffffff811a76b1>] SyS_ioctl+0x91/0xb0 [32524.386604] [<ffffffff815057e2>] system_call_fastpath+0x16/0x1b ======================================================================== The reason is that all of the addr_lock_key for vlan dev have the same class, so if we change the status for vlan dev, the vlan dev and its real dev will hold the same class of addr_lock_key together, so the warning happened. we should distinguish the lock depth for vlan dev and its real dev. v1->v2: Convert the vlan_netdev_addr_lock_key to an array of eight elements, which could support to add 8 vlan id on a same vlan dev, I think it is enough for current scene, because a netdev's name is limited to IFNAMSIZ which could not hold 8 vlan id, and the vlan dev would not meet the same class key with its real dev. The new function vlan_dev_get_lockdep_subkey() will return the subkey and make the vlan dev could get a suitable class key. v2->v3: According David's suggestion, I use the subclass to distinguish the lock key for vlan dev and its real dev, but it make no sense, because the difference for subclass in the lock_class_key doesn't mean that the difference class for lock_key, so I use lock_depth to distinguish the different depth for every vlan dev, the same depth of the vlan dev could have the same lock_class_key, I import the MAX_LOCK_DEPTH from the include/linux/sched.h, I think it is enough here, the lockdep should never exceed that value. v3->v4: Add a huge array of locking keys will waste static kernel memory and is not a appropriate method, we could use _nested() variants to fix the problem, calculate the depth for every vlan dev, and use the depth as the subclass for addr_lock_key. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 54d63f78 ] It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but this is unsafe, the module always supposes that this device exists. For example, ip6gre_tunnel_lookup() may use it unconditionally. Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we let ip6gre_destroy_tunnels() do the job). Introduced by commit c12b395a ("gre: Support GRE over IPv6"). CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 05ab8f26 ] The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check for a minimal message length before testing the supplied offset to be within the bounds of the message. This allows the subtraction of the nla header to underflow and therefore -- as the data type is unsigned -- allowing far to big offset and length values for the search of the netlink attribute. The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is also wrong. It has the minuend and subtrahend mixed up, therefore calculates a huge length value, allowing to overrun the end of the message while looking for the netlink attribute. The following three BPF snippets will trigger the bugs when attached to a UNIX datagram socket and parsing a message with length 1, 2 or 3. ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]-- | ld #0x87654321 | ldx #42 | ld #nla | ret a `--- ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]-- | ld #0x87654321 | ldx #42 | ld #nlan | ret a `--- ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]-- | ; (needs a fake netlink header at offset 0) | ld #0 | ldx #42 | ld #nlan | ret a `--- Fix the first issue by ensuring the message length fulfills the minimal size constrains of a nla header. Fix the second bug by getting the math for the remainder calculation right. Fixes: 4738c1db ("[SKFILTER]: Add SKF_ADF_NLATTR instruction") Fixes: d214c753 ("filter: add SKF_AD_NLATTR_NEST to look for nested..") Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Acked-by:
-
Julian Anastasov authored
[ Upstream commit 91146153 ] Extend commit 13378cad ("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0 which is displayed as 'iif *'. inet_iif is not appropriate to use because skb_iif is not set. Use the skb->dev->ifindex instead. Signed-off-by:
-
Wang, Xiaoming authored
[ Upstream commit b04c4619 ] Plug a group_info refcount leak in ping_init. group_info is only needed during initialization and the code failed to release the reference on exit. While here move grabbing the reference to a place where it is actually needed. Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by:
Zhang Dongxing <dongxing.zhang@intel.com> Signed-off-by:
xiaoming wang <xiaoming.wang@intel.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 8d89dcdf ] Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41 ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3 ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 5a455275 ] Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c5441932 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 30f78d8e ] Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by:
Francois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit eb707618 ] br_allowed_ingress() has two problems. 1. If br_allowed_ingress() is called by br_handle_frame_finish() and vlan_untag() in br_allowed_ingress() fails, skb will be freed by both vlan_untag() and br_handle_frame_finish(). 2. If br_allowed_ingress() is called by br_dev_xmit() and br_allowed_ingress() fails, the skb will not be freed. Fix these two problems by freeing the skb in br_allowed_ingress() if it fails. Signed-off-by:
-
Thomas Richter authored
[ Upstream commit db298686 ] Remove the bonding debug_fs entries when the module initialization fails. The debug_fs entries should be removed together with all other already allocated resources. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 6d39d589 ] In case of tcp, gso_size contains the tcpmss. For UFO (udp fragmentation offloading) skbs, gso_size is the fragment payload size, i.e. we must not account for udp header size. Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet will be needlessly fragmented in the forward path, because we think its individual segments are too large for the outgoing link. Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path") Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by:
Tobias Brunner <tobias@strongswan.org> Signed-off-by:
-
Dmitry Petukhov authored
[ Upstream commit f34c4a35 ] When l2tp driver tries to get PMTU for the tunnel destination, it uses the pointer to struct sock that represents PPPoX socket, while it should use the pointer that represents UDP socket of the tunnel. Signed-off-by:
Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1e1cdf8a ] In function sctp_wake_up_waiters(), we need to involve a test if the association is declared dead. If so, we don't have any reference to a possible sibling association anymore and need to invoke sctp_write_space() instead, and normally walk the socket's associations and notify them of new wmem space. The reason for special casing is that otherwise, we could run into the following issue when a sctp_primitive_SEND() call from sctp_sendmsg() fails, and tries to flush an association's outq, i.e. in the following way: sctp_association_free() `-> list_del(&asoc->asocs) <-- poisons list pointer asoc->base.dead = true sctp_outq_free(&asoc->outqueue) `-> __sctp_outq_teardown() `-> sctp_chunk_free() `-> consume_skb() `-> sctp_wfree() `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers if asoc->ep->sndbuf_policy=0 Therefore, only walk the list in an 'optimized' way if we find that the current association is still active. We could also use list_del_init() in addition when we call sctp_association_free(), but as Vlad suggests, we want to trap such bugs and thus leave it poisoned as is. Why is it safe to resolve the issue by testing for asoc->base.dead? Parallel calls to sctp_sendmsg() are protected under socket lock, that is lock_sock()/release_sock(). Only within that path under lock held, we're setting skb/chunk owner via sctp_set_owner_w(). Eventually, chunks are freed directly by an association still under that lock. So when traversing association list on destruction time from sctp_wake_up_waiters() via sctp_wfree(), a different CPU can't be running sctp_wfree() while another one calls sctp_association_free() as both happens under the same lock. Therefore, this can also not race with setting/testing against asoc->base.dead as we are guaranteed for this to happen in order, under lock. Further, Vlad says: the times we check asoc->base.dead is when we've cached an association pointer for later processing. In between cache and processing, the association may have been freed and is simply still around due to reference counts. We check asoc->base.dead under a lock, so it should always be safe to check and not race against sctp_association_free(). Stress-testing seems fine now, too. Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 52c35bef ] SCTP charges chunks for wmem accounting via skb->truesize in sctp_set_owner_w(), and sctp_wfree() respectively as the reverse operation. If a sender runs out of wmem, it needs to wait via sctp_wait_for_sndbuf(), and gets woken up by a call to __sctp_write_space() mostly via sctp_wfree(). __sctp_write_space() is being called per association. Although we assign sk->sk_write_space() to sctp_write_space(), which is then being done per socket, it is only used if send space is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE is set and therefore not invoked in sock_wfree(). Commit 4c3a5bda ("sctp: Don't charge for data in sndbuf again when transmitting packet") fixed an issue where in case sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. However, a still remaining issue is that if net.sctp.sndbuf_policy=0, that is accounting per socket, and one-to-many sockets are in use, the reclaimed write space from sctp_wfree() is 'unfairly' handed back on the server to the association that is the lucky one to be woken up again via __sctp_write_space(), while the remaining associations are never be woken up again (unless by a signal). The effect disappears with net.sctp.sndbuf_policy=1, that is wmem accounting per association, as it guarantees a fair share of wmem among associations. Therefore, if we have reclaimed memory in case of per socket accounting, wake all related associations to a socket in a fair manner, that is, traverse the socket association list starting from the current neighbour of the association and issue a __sctp_write_space() to everyone until we end up waking ourselves. This guarantees that no association is preferred over another and even if more associations are taken into the one-to-many session, all receivers will get messages from the server and are not stalled forever on high load. This setting still leaves the advantage of per socket accounting in touch as an association can still use up global limits if unused by others. Fixes: 4eb701df ("[SCTP] Fix SCTP sendbuffer accouting.") Signed-off-by:
-
Oleg Nesterov authored
[ Upstream commit 008208c6 ] Add two trivial helpers list_next_entry() and list_prev_entry(), they can have a lot of users including list.h itself. In fact the 1st one is already defined in events/core.c and bnx2x_sp.c, so the patch simply moves the definition to list.h. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Deucher authored
commit 16086279 upstream. This needs to be done to update some of the fields in the connector structure used by the audio code. Noticed by several users on irc. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Maarten Lankhorst authored
commit 41ccec35 upstream. This fixes a BUG_ON(bo->sync_obj != NULL); in ttm_bo_release_list. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Thomas Hellstrom authored
commit cbd75e97 upstream. We already check that the buffer object we're accessing is registered with the file. Now also make sure that we can't DMA across buffer object boundaries. v2: Code commenting update. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Christopher Friedt authored
commit aa6de142 upstream. Previously, the vmwgfx_fb driver would allow users to call FBIOSET_VINFO, but it would not adjust the FINFO properly, resulting in distorted screen rendering. The patch corrects that behaviour. See https://bugs.gentoo.org/show_bug.cgi?id=494794 for examples. Signed-off-by:
Christopher Friedt <chrisfriedt@gmail.com> Reviewed-by:
-
Bjørn Mork authored
commit 34f972d6 upstream. A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
-
