Creative IBG controllers require the playback stream-tags to be started
from 1, instead of capture+1.  Otherwise the stream stalls.
Reported-by: Wai Yew CHAY <wychay@ctl.creative.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The bit value set for TLV mute was wrong in commit
de8c85f7, which resulted in bogus
dB ranges that screw up PulseAudio.  Corrected with the right constant.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Multiple Acer laptops with the SSID 1025:04xx require the quirk
mode=ideapad, so let's use mask to apply to all these.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Creative HD-audio controller chips require some workarounds:
 - Additional delay before RIRB response
 - Set the initial RIRB counter to 0xc0

The latter seems to be done in general in Windows driver, so we may
use this value later for all types if it's confirmed to work better.
Reported-by: Wai Yew CHAY <wychay@ctl.creative.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The dig_out_nid field must take a digital-converter widget, but the current
ca0110 parser passed the pin wrongly instead.
Reported-by: Wai Yew CHAY <wychay@ctl.creative.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Windows may leave pin power-down registers set after reboot, and
this resulted in muted output on Linux.  Reset these registers
at initialization properly.
Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The HDA specification does not allow for a codec to mute itself just
because the volume is reduced, so _of course_ somebody had to go and do
it.  This wouldn'\''t hurt too much when the volume is adjusted by hand,
but programs like PA that try to set the volume automatically could
inadvertently mute the output.

To work around this, change the TLV dB information for the Master volume
on all Sigmatel HDA codecs to indicate the the minimal volume setting
actually mutes.
Reported-by: Colin Guthrie <gmane@colin.guthr.ie>
Reported-by: "Alexander E. Patrakov" <patrakov@gmail.com>
Tested-by: Colin Guthrie <cguthrie@mandriva.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: http://launchpad.net/bugs/617647

The current SKU value disables playback, so ignore the SKU value.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Realtek have ways of specifying external amps and more via a
special nid or via the Codec's subsystem ID, this is called "SKU".
The computer manufacturer sometimes gets this wrong, so we need
to be able to override or ignore the SKU customization value.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/656625

Add clause for handling Acer Aspire 8943G's subwoofer as additional
speaker pin for automuting.

Reported-by: RussianNeuroMancer
Cc: stable@kernel.org
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Position_fix quirks for specific machines now override the default
position_fix behavior for all HDA controllers.

BugLink: http://launchpad.net/bugs/465942
BugLink: http://launchpad.net/bugs/580749
BugLink: http://launchpad.net/bugs/587546Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The input pins on cirrus codecs have also input amps.  Let's make
control elemetns for them.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Reference: Novell bnc#645066
	https://bugzilla.novell.com/show_bug.cgi?id=645066Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

What was previously known as via_dmapos_patch, and hard-coded to be
used for VIA and ATI controllers, is now configurable through a module
option. The background is that some VIA controllers seem to prefer
via_dmapos_patch to be turned off.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/647374

Set another Acer laptop (SSID 1025:043d) to use CXT5066_IDEAPAD
Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix bug in switching between dmic and mic when both use the same mux.
Signed-off-by: Vitaliy Kulikov  <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The SPDIF in audio widget must be searched through the list as the widget
that contains the given pin as the connection source.  The current code
was implemented in a reverse way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

I've found the following patch is necessary to enable line-in on
my MacBookPro 5,3 machine.  With the patch applied I've successfully
recorded audio from the line-in jack.  This is based on the existing
5,5 support.
Signed-off-by: Vince Weaver <vweaver1@eecs.utk.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We've applied a fix-up for ALC269 VAIO only for two models.  But all
Sony VAIO models with ALC269 codec seem to require the similar fix.
Let's apply it with vendor-id mask.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The headphone and external-mic pin NIDs can be null, and the jack input
elements should be skipped in such a case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/643891

Set the Dell Latitude E6400 (1028:0233) SSID to use AD1984_DELL_DESKTOP

Cc: stable@kernel.org
Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Replace the explicit ifdef check and call of check_power_status ops with
a new helper function, hda_call_check_power_status().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Channel 2 and channel 3 were all wrongly mapped to HDMI slot 4.
This shows up as a bug that one channel is "lost" when playing in
surround41 mode.
Signed-off-by: Jerry Zhou <jerry.zhou@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

DisplayPort works mostly in the same way as HDMI, except that it expects
a slightly different audio infoframe format.

Citations from "HDA036-A: Display Port Support and HDMI Miscellaneous
Corrections":

The HDMI specification defines a data island packet with a header of 4
bytes (3 bytes content + 1 byte ECC) and packet body of 32 bytes (28
bytes content and 4 bytes ECC). Display Port specification on the other
hand defines a data island packet (secondary data packet) with header of
4 bytes protected by 4 bytes of parity, and data of theoretically up to
1024 bytes with each 16 bytes chunk of data protected by 4 bytes of
parity. Note that the ECC or parity bytes are not present in the DIP
content populated by software and are hardware generated.

It tests DP connection based on the ELD conn_type field, which will be
set by the graphics driver and can be overriden manually by users
through the /proc/asound/card0/eld* interface.

The DP infoframe is tested OK on Intel SandyBridge/CougarPoint platform.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Create a helper function to simplify the code.
Also, cleaned up the ifdef SND_HDA_NEEDS_RESUME and
CONFIG_SND_HDA_POWER_SAVE.  The former is always defined when the latter
is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC269vb and other variants don't use the widgets 0x24 but prefer the
widget 0x22 instead.  We need to fix the input parser.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Don't call the COEF check for checking ACL269 codec variants at each
time in init but remember the type at the initialization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When multiple pins are assigned to headphones or speakers, they haven't
been initialized properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When quirks are applied, the numbers of output pins in autocfg aren't
set up properly but only pin arrays are changed.  Let's fix it up so that
the rest of the parser can use autocfg.line_outs & co safely.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch merges all three patch_*hdmi variants to the single HDMI
parser.  There is only one snd-hda-codec-hdmi module now.

In this patch, the behavior of each parser isn't changed much.
The old ATI parser still doesn't use the dynamic parser yet.
In later patches, they'll be cleaned up.

Also, this patch gets rid of the individual snd-hda-eld module and
builds into snd-hda-codec-hdmi, since this is referred only from the
HDMI parser.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The external mic jack for auto-mic switch must be really an external
jack and with a presense-detection capability.  This patch makes the
check more paranoia.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Make the helper function to give the input-pin attribute for jack
connectivity and location.  This simplifies checks of input-pin jacks
a bit in some places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It was just a boring day.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>