(not the fbcon maintainer pull 2)

fix bug in vgacon on bootup and fbcon losing fonts on startup.

* console-fixes: (50 commits)
  fbcon: don't lose the console font across generic->chip driver switch
  vgacon/vt: clear buffer attributes when we load a 512 character font (v2)

This pulls in most of Linus tree up to -rc6, this fixes the worst lockdep
reported issues and re-enables fbcon lockdep.

(not the fbcon maintainer)
* 'fbcon-locking-fixes' of ssh://people.freedesktop.org/~airlied/linux: (529 commits)
  Revert "Revert "console: implement lockdep support for console_lock""
  fbcon: fix locking harder
  fb: Yet another band-aid for fixing lockdep mess
  fb: rework locking to fix lock ordering on takeover

This reverts commit ff0d05bf.

Now that we have all the locking fixes in place, we can revert the
revert. This re-enables lockdep tracking for the console lock,
daee7797.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Okay so Alan's patch handled the case where there was no registered fbcon,
however the other path entered in set_con2fb_map pit.

In there we called fbcon_takeover, but we also took the console lock in a couple
of places. So push the console lock out to the callers of set_con2fb_map,

this means fbmem and switcheroo needed to take the lock around the fb notifier
entry points that lead to this.

This should fix the efifb regression seen by Maarten.
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver().  After this hack, lockdep
warnings are finally gone.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Adjust the console layer to allow a take over call where the caller
already holds the locks.  Make the fb layer lock in order.

This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.

[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

I've been getting the following warning when doing randbuilds
since forever. Now it finally pissed me off just the perfect
amount so that I can fix it.

  arch/x86/kernel/cpu/intel_cacheinfo.c:489:27: warning: ‘cache_disable_0’ defined but not used [-Wunused-variable]
  arch/x86/kernel/cpu/intel_cacheinfo.c:491:27: warning: ‘cache_disable_1’ defined but not used [-Wunused-variable] arch/x86/kernel/cpu/intel_cacheinfo.c:524:27: warning: ‘subcaches’ defined but not used [-Wunused-variable]

It happens because in randconfigs where CONFIG_SYSFS is not set,
the whole sysfs-interface to L3 cache index disabling is
remaining unused and gcc correctly warns about it. Make it
optional, depending on CONFIG_SYSFS too, as is the case with
other sysfs-related machinery in this file.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/1359969195-27362-1-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

The boot protocol 2.12 changes were pulled for 3.8, so update the
documentation accordingly.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

For some reason they didn't get replaced so far by their
paravirt equivalents, resulting in code to be run with
interrupts disabled that doesn't expect so (causing, in the
observed case, a BUG_ON() to trigger) when syscall auditing is
enabled.

David (Cc-ed) came up with an identical fix, so likely this can
be taken to count as an ack from him.
Reported-by: Peter Moody <pmoody@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/5108E01902000078000BA9C5@nat28.tlf.novell.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Tested-by: Peter Moody <pmoody@google.com>

Merge tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
"Probably the last feature pull for 3.9, there's some fixes outstanding
thought that I'd like to sneak in. And maybe 3.8 takes a bit longer ...
Anyway, highlights of this pull:
- Kill the horrible IS_DISPLAYREG hack to handle the mmio offset movements
  on vlv, big thanks to Ville.
- Dynamic power well support for Haswell, shaves away a bit when only
  using the eDP port on pipe A (Paulo). Plus unclaimed register fixes
  uncovered by this.
- Clarifications of the gpu hang/reset state transitions, hopefully fixing
  a few spurious -EIO deaths in userspace.
- Haswell ELD fixes.
- Some more (pp)gtt cleanups from Ben.
- A few smaller things all over.

Plus all the stuff from the previous rather small pull request:
- Broadcast RBG improvements and reduced color range fixes from Ville.
- Ben is on a "kill legacy gtt code for good" spree, first pile of patches
  included.
- No-relocs and bo lut improvements for faster execbuf from Chris.
- Some refactorings from Imre."

* tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
  GPU/i915: Fix acpi_bus_get_device() check in drivers/gpu/drm/i915/intel_opregion.c
  drm/i915: Set the SR01 "screen off" bit in i915_redisable_vga() too
  drm/i915: Kill IS_DISPLAYREG()
  drm/i915: Introduce i915_vgacntrl_reg()
  drm/i915: gen6_gmch_remove can be static
  drm/i915: dynamic Haswell display power well support
  drm/i915: check the power down well on assert_pipe()
  drm/i915: don't send DP "idle" pattern before "normal" on HSW PORT_A
  drm/i915: don't run hsw power well code on !hsw
  drm/i915: kill cargo-culted locking from power well code
  drm/i915: Only run idle processing from i915_gem_retire_requests_worker
  drm/i915: Fix CAGF for HSW
  drm/i915: Reclaim GTT space for failed PPGTT
  drm/i915: remove intel_gtt structure
  drm/i915: Add probe and remove to the gtt ops
  drm/i915: extract hw ppgtt setup/cleanup code
  drm/i915: pte_encode is gen6+
  drm/i915: vfuncs for ppgtt
  drm/i915: vfuncs for gtt_clear_range/insert_entries
  drm/i915: Error state should print /sys/kernel/debug
  ...

If grub2 loads efifb/vesafb, then when systemd starts it can set the console
font on that framebuffer device, however when we then load the native KMS
driver, the first thing it does is tear down the generic framebuffer driver.

The thing is the generic code is doing the right thing, it frees the font
because otherwise it would leak memory. However we can assume that if you
are removing the generic firmware driver (vesa/efi/offb), that a new driver
*should* be loading soon after, so we effectively leak the font.

However the old code left a dangling pointer in vc->vc_font.data and we
can now reuse that dangling pointer to load the font into the new
driver, now that we aren't freeing it.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.

The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.

A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.

v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull media fixes from Mauro Carvalho Chehab:
 "For a regression fix on a few radio drivers that were preventing radio
  TX to work on those devices"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] radio: set vfl_dir correctly to fix modulator regression

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a few tiny USB fixes for 3.8-rc6.

  Nothing major here, some host controller bug fixes to resolve a number
  of bugs that people have reported, and a bunch of additional device
  ids are added to a number of drivers (which caused code to be deleted
  from the usb-storage driver, always nice)"

* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  USB: storage: optimize to match the Huawei USB storage devices and support new switch command
  USB: storage: Define a new macro for USB storage match rules
  USB: ftdi_sio: add Zolix FTDI PID
  USB: option: add Changhong CH690
  USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
  USB: add OWL CM-160 support to cp210x driver
  USB: EHCI: fix bug in scheduling periodic split transfers
  USB: EHCI: fix for leaking isochronous data
  USB: option: add support for Telit LE920
  USB: qcserial: add Telit Gobi QDL device
  USB: EHCI: fix timer bug affecting port resume
  USB: UHCI: notify usbcore about port resumes
  USB: EHCI: notify usbcore about port resumes
  USB: add usb_hcd_{start,end}_port_resume
  USB: EHCI: unlink one async QH at a time
  USB: EHCI: remove ASS/PSS polling timeout
  usb: Using correct way to clear usb3.0 device's remote wakeup feature.
  usb: Prevent dead ports when xhci is not enabled
  USB: XHCI: fix memory leak of URB-private data
  drivers: xhci: fix incorrect bit test
  ...

Pull DMA mapping fixes from Marek Szyprowski:
 "This pull request contains important bugfix patches for 9
  architectures, which finally fixes broken allmodconfig builds
  introduced in v3.8-rc1.  Those architectures don't use dma_map_ops
  based implementation and require manual update or additional dummy
  implementations of the missing new dma-mapping api functions:
  dma_mmap_coherent and dma_get_sgtable."

* 'fixes-for-v3.8-rc7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  xtensa: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  parisc: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  mn10300: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  m68k: Provide dma_mmap_coherent() and dma_get_sgtable()
  frv: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  cris: Provide dma_mmap_coherent() and dma_get_sgtable()
  c6x: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
  blackfin: Provide dma_mmap_coherent() and dma_get_sgtable()
  avr32: Provide dma_mmap_coherent() and dma_get_sgtable()

Pull dlm fix from David Teigland:
 "Thanks to Jana who reported the problem and was able to test this fix
  so quickly."

This fixes an incorrect size check that triggered for CONFIG_COMPAT
whether the code was actually doing compat or not.  The incorrect write
size check broke userland (clvmd) when maximum resource name lengths are
used.

* 'fix-max-write' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: check the write size from user

Merge mix fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 commits)
  drivers/rtc/rtc-pl031.c: fix the missing operation on enable
  drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler
  samples/seccomp: be less stupid about cross compiling
  checkpatch: fix $Float creation of match variables
  memcg: fix typo in kmemcg cache walk macro
  mm: fix wrong comments about anon_vma lock
  MAINTAINERS: update avr32 web ressources
  mm/hugetlb: set PTE as huge in hugetlb_change_protection and remove_migration_pte
  drivers/rtc/rtc-vt8500.c: fix year field in vt8500_rtc_set_time()
  tools/vm: add .gitignore to ignore built binaries
  thp: avoid dumping huge zero page
  nilfs2: fix fix very long mount time issue

The RTC control register should be enabled in the process of
initializing.

Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC.  The
register mapping section in RTC is always read as zero.  So I doubt that
ST guys may already enable this register in bootloader.  So they won't
meet this issue.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The seccomp filters are currently built for the build host, not for the
machine that they are going to run on, but they are also built for with
the -m32 flag if the kernel is built for a 32 bit machine, both of which
seems rather odd.

It broke allyesconfig on my machine, which is x86-64, but building for
32 bit ARM, with this error message:

  In file included from /usr/include/stdio.h:28:0,
                   from samples/seccomp/bpf-fancy.c:15:
  /usr/include/features.h:324:26: fatal error: bits/predefs.h: No such file or directory

because there are no 32 bit libc headers installed on this machine.  We
should really be building all the samples for the target machine rather
than the build host, but since the infrastructure for that appears to be
missing right now, let's be a little bit smarter and not pass the '-m32'
flag to the HOSTCC when cross- compiling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Morris <james.l.morris@oracle.com>
Acked-by: Will Drewry <wad@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 74349bcc ("checkpatch: add support for floating point
constants") added an unnecessary match variable that caused tests that
used a $Constant or $LvalOrFunc to have one too many matches.

This causes problems with usleep_range, min/max and other extended
tests.

Avoid using match variables in $Float.
Avoid using match variables in $Assignment too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The macro for_each_memcg_cache_index contains a silly yet potentially
deadly mistake.  Although the macro parameter is _idx, the loop tests
are done over i, not _idx.

This hasn't generated any problems so far, because all users use i as a
loop index.  However, while playing with an extension of the code I
ended using another loop index and the compiler was quick to complain.

Unfortunately, this is not the kind of thing that testing reveals =(
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We use rwsem since commit 5a505085 ("mm/rmap: Convert the struct
anon_vma::mutex to an rwsem").  And most of comments are converted to
the new rwsem lock; while just 2 more missed from:

	 $ git grep 'anon_vma->mutex'
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Web resource http://avr32linux.org/ is no longer available.  We add the
mirror of the web page foud at http://mirror.egtvedt.no/avr32linux.org/.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When setting a huge PTE, besides calling pte_mkhuge(), we also need to
call arch_make_huge_pte(), which we indeed do in make_huge_pte(), but we
forget to do in hugetlb_change_protection() and remove_migration_pte().
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The year field is incorrectly masked when setting the date.  If the year
is beyond 2099, the year field will be incorrectly updated in hardware.

This patch masks the year field correctly.
Signed-off-by: Edgar Toernig <froese@gmx.de>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no .gitignore in tools/vm, so 'git status' always show built
binaries.  To ignore this, add .gitignore.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

No reason to preserve the huge zero page in core dumps.
Reported-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There exists a situation when GC can work in background alone without
any other filesystem activity during significant time.

The nilfs_clean_segments() method calls nilfs_segctor_construct() that
updates superblocks in the case of NILFS_SC_SUPER_ROOT and
THE_NILFS_DISCONTINUED flags are set.  But when GC is working alone the
nilfs_clean_segments() is called with unset THE_NILFS_DISCONTINUED flag.
As a result, the update of superblocks doesn't occurred all this time
and in the case of SPOR superblocks keep very old values of last super
root placement.

SYMPTOMS:

Trying to mount a NILFS2 volume after SPOR in such environment ends with
very long mounting time (it can achieve about several hours in some
cases).

REPRODUCING PATH:

1. It needs to use external USB HDD, disable automount and doesn't
   make any additional filesystem activity on the NILFS2 volume.

2. Generate temporary file with size about 100 - 500 GB (for example,
   dd if=/dev/zero of=<file_name> bs=1073741824 count=200).  The size of
   file defines duration of GC working.

3. Then it needs to delete file.

4. Start GC manually by means of command "nilfs-clean -p 0".  When you
   start GC by means of such way then, at the end, superblocks is updated
   by once.  So, for simulation of SPOR, it needs to wait sometime (15 -
   40 minutes) and simply switch off USB HDD manually.

5. Switch on USB HDD again and try to mount NILFS2 volume.  As a
   result, NILFS2 volume will mount during very long time.

REPRODUCIBILITY: 100%

FIX:

This patch adds checking that superblocks need to update and set
THE_NILFS_DISCONTINUED flag before nilfs_clean_segments() call.
Reported-by: Sergey Alexandrov <splavgm@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Return EINVAL from write if the size is larger than
allowed.  Do this before allocating kernel memory for
the bogus size, which could lead to OOM.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Jana Saout <jana@saout.de>
Signed-off-by: David Teigland <teigland@redhat.com>

Pull x86 fixes from Ingo Molnar:
 "Three small fixlets"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel/cacheinfo: Shut up annoying warning
  x86, doc: Boot protocol 2.12 is in 3.8
  x86-64: Replace left over sti/cli in ia32 audit exit code

Pull scheduler fixes from Ingo Molnar:
 "Three small fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix format string for 32-bit platforms
  sched: Fix warning in kernel/sched/fair.c
  sched/rt: Use root_domain of rt_rq not current processor

Pull perf fixes from Ingo Molnar:
 "Three fixlets and two small (and low risk) hw-enablement changes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix event group context move
  x86/perf: Add IvyBridge EP support
  perf/x86: Fix P6 driver section warning
  arch/x86/tools/insn_sanity.c: Identify source of messages
  perf/x86: Enable Intel Lincroft/Penwell/Cloverview Atom support

Pull two small RCU fixlets from Ingo Molnar.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Make rcu_nocb_poll an early_param instead of module_param
  rcu: Prevent soft-lockup complaints about no-CBs CPUs

Pull MTD fixes from David Woodhouse:
 "A small set of simple regression and build fixes for 3.8:
   - Fix a warning introduced in ONFI NAND probe
   - Fix commandline partition parsing
   - Require BITREVERSE for DiskOnChip G3 driver
   - Fix build failure for davinci_nand as module
   - Bump NFLASH_READY_RETRIES for bcm47xxnflash"

* tag 'for-linus-20130204' of git://git.infradead.org/linux-mtd:
  mtd: nand: onfi don't WARN if we are in 16 bits mode
  mtd: physmap_of: fix cmdline partition method w/o linux, mtd-name
  mtd: docg3 fix missing bitreverse lib
  mtd: davinci_nand: fix modular build with CONFIG_OF=y
  mtd: bcm47xxnflash: increase NFLASH_READY_RETRIES

1. Optimize the match rules with new macro for Huawei USB storage devices,
   to avoid to load USB storage driver for the modem interface
   with Huawei devices.
2. Add to support new switch command for new Huawei USB dongles.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Define a new macro for USB storage match rules:
    matching with Vendor ID and interface descriptors.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I've been getting the following warning when doing randbuilds
since forever. Now it finally pissed me off just the perfect
amount so that I can fix it.

  arch/x86/kernel/cpu/intel_cacheinfo.c:489:27: warning: ‘cache_disable_0’ defined but not used [-Wunused-variable]
  arch/x86/kernel/cpu/intel_cacheinfo.c:491:27: warning: ‘cache_disable_1’ defined but not used [-Wunused-variable] arch/x86/kernel/cpu/intel_cacheinfo.c:524:27: warning: ‘subcaches’ defined but not used [-Wunused-variable]

It happens because in randconfigs where CONFIG_SYSFS is not set,
the whole sysfs-interface to L3 cache index disabling is
remaining unused and gcc correctly warns about it. Make it
optional, depending on CONFIG_SYSFS too, as is the case with
other sysfs-related machinery in this file.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/1359969195-27362-1-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull powerpc update from Benjamin Herrenschmidt:
 "Just so that you don't get too bored on your Island here's a patch for
  3.8 fixing a nasty bug that affects the new 64T support that was
  merged in 3.7.  Please apply whenever you have a chance (and an
  internet connection!)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mm: Fix hash computation function

Pull radeon fixes from Dave Airlie:
 "I got these late last week, the main chunks of these fix a rendering
  regression since 3.7, and the settle ones all fix the issue where we
  don't wait long enough for the memory controller to settle after
  turning it off which causes bad memory reads, they all fix real users
  bugs, and most of them are destined for stable.

  Can't remember if you had net connection on that island :-)"

I don't know if the "two tin-cans and a string" thing here on "that
island" can really be considered internet, but I guess I can pull
things.  Barely.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: switch back to the CP ring for VM PT updates
  drm/radeon: prevent crash in the ring space allocation
  drm/radeon: Calling object_unrefer() when creating fb failure
  drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackout
  drm/radeon/evergreen+: wait for the MC to settle after MC blackout
  drm/radeon: protect against div by 0 in backend setup
  drm/radeon: fix backend map setup on 1 RB sumo boards
  drm/radeon: add quirk for RV100 board
  drm/radeon: add WAIT_UNTIL to the non-VM safe regs list for cayman/TN
  drm/radeon: fix MC blackout on evergreen+