1. 27 Feb, 2009 40 commits
    • David S. Miller's avatar
    • Greg Ungerer's avatar
      m68knommu: remove ColdFire specific setup code from FEC driver · 43be6366
      Greg Ungerer authored
      Remove the ColdFire CPU specific setup from here. The ColdFire
      CPU platform code now sets up all this.
      Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43be6366
    • Greg Ungerer's avatar
      fec: add FEC platform support to ColdFire CPU's setup code · ffba3f48
      Greg Ungerer authored
      m68knommu: add FEC platform support to ColdFire CPU's setup code
      
      Move the per-CPU FEC driver setup code into the actual platform
      setup code for each ColdFire CPU varient.
      Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ffba3f48
    • Eric Sesterhenn's avatar
      MISDN: list usage cleanup · 211174ea
      Eric Sesterhenn authored
      Trivial cleanup, list_del(); list_add_tail() is equivalent
      to list_move_tail(). Semantic patch for coccinelle can be
      found at www.cccmz.de/~snakebyte/list_move_tail.spatch
      Signed-off-by: default avatarEric Sesterhenn <snakebyte@gmx.de>
      Acked-by: default avatarKarsten Keil <kkeil@novell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      211174ea
    • Ron Mercer's avatar
      qlge: Reduce debug print output. · 4974097a
      Ron Mercer authored
      Get rid of some noise that is for debug only.
      Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4974097a
    • Ron Mercer's avatar
      qlge: Prepare to add new device. · b0c2aadf
      Ron Mercer authored
      This organizes a few calls into a function table to enable adding new
      devices.
      Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0c2aadf
    • Ron Mercer's avatar
      qlge: Move firmware event handler. · 125844ea
      Ron Mercer authored
      This is not a logical change but rather a move of the inbound firmware event
      handler into it's own function as it will later be called by the outbound
      path.
      The addition of the mutex is to create exclusive access to the mailbox
      commands between inbound and outbound handling.
      Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      125844ea
    • Ron Mercer's avatar
      qlge: Clean up firmware reset path. · a2e809bb
      Ron Mercer authored
      Add function for performing the reset rather than in-line. This function
      may later be called by a core dump process.
      Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2e809bb
    • Ron Mercer's avatar
      b82808b7
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Stephen Hemminger's avatar
    • Wei Yongjun's avatar
      Bluetooth: Remove some pointless conditionals before kfree_skb() · b1fb0683
      Wei Yongjun authored
      Remove some pointless conditionals before kfree_skb().
      Signed-off-by: default avatarWei Yongjun <yjwei@cn.fujitsu.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      b1fb0683
    • Wei Yongjun's avatar
      Bluetooth: Remove some pointless conditionals before kfree_skb() · 7585b97a
      Wei Yongjun authored
      Remove some pointless conditionals before kfree_skb().
      Signed-off-by: default avatarWei Yongjun <yjwei@cn.fujitsu.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      7585b97a
    • Dave Young's avatar
      Bluetooth: Move hci_conn_del_sysfs() back to avoid device destruct too early · 2ae9a6be
      Dave Young authored
      The following commit introduce a regression:
      
      	commit 7d0db0a3
      	Author: Marcel Holtmann <marcel@holtmann.org>
      	Date:   Mon Jul 14 20:13:51 2008 +0200
      
      		[Bluetooth] Use a more unique bus name for connections
      
      I get panic as following (by netconsole):
      
      [ 2709.344034] usb 5-1: new full speed USB device using uhci_hcd and address 4
      [ 2709.505776] usb 5-1: configuration #1 chosen from 1 choice
      [ 2709.569207] Bluetooth: Generic Bluetooth USB driver ver 0.4
      [ 2709.570169] usbcore: registered new interface driver btusb
      [ 2845.742781] BUG: unable to handle kernel paging request at 6b6b6c2f
      [ 2845.742958] IP: [<c015515c>] __lock_acquire+0x6c/0xa80
      [ 2845.743087] *pde = 00000000
      [ 2845.743206] Oops: 0002 [#1] SMP
      [ 2845.743377] last sysfs file: /sys/class/bluetooth/hci0/hci0:6/type
      [ 2845.743742] Modules linked in: btusb netconsole snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth vfat fuse snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 snd_timer psmouse usbserial snd 3c59x e100 serio_raw soundcore i2c_i801 intel_agp mii agpgart snd_page_alloc rtc_cmos rtc_core thermal processor rtc_lib button thermal_sys sg evdev
      [ 2845.743742]
      [ 2845.743742] Pid: 0, comm: swapper Not tainted (2.6.29-rc5-smp #54) Dell DM051
      [ 2845.743742] EIP: 0060:[<c015515c>] EFLAGS: 00010002 CPU: 0
      [ 2845.743742] EIP is at __lock_acquire+0x6c/0xa80
      [ 2845.743742] EAX: 00000046 EBX: 00000046 ECX: 6b6b6b6b EDX: 00000002
      [ 2845.743742] ESI: 6b6b6b6b EDI: 00000000 EBP: c064fd14 ESP: c064fcc8
      [ 2845.743742]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
      [ 2845.743742] Process swapper (pid: 0, ti=c064e000 task=c05d1400 task.ti=c064e000)
      [ 2845.743742] Stack:
      [ 2845.743742]  c05d1400 00000002 c05d1400 00000001 00000002 00000000 f65388dc c05d1400
      [ 2845.743742]  6b6b6b6b 00000292 c064fd0c c0153732 00000000 00000000 00000001 f700fa50
      [ 2845.743742]  00000046 00000000 00000000 c064fd40 c0155be6 00000000 00000002 00000001
      [ 2845.743742] Call Trace:
      [ 2845.743742]  [<c0153732>] ? trace_hardirqs_on_caller+0x72/0x1c0
      [ 2845.743742]  [<c0155be6>] ? lock_acquire+0x76/0xa0
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c046c885>] ? _spin_lock_irqsave+0x45/0x80
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c03e1f94>] ? skb_queue_purge+0x14/0x20
      [ 2845.743742]  [<f8171f5a>] ? hci_conn_del+0x10a/0x1c0 [bluetooth]
      [ 2845.743742]  [<f81399c9>] ? l2cap_disconn_ind+0x59/0xb0 [l2cap]
      [ 2845.743742]  [<f81795ce>] ? hci_conn_del_sysfs+0x8e/0xd0 [bluetooth]
      [ 2845.743742]  [<f8175758>] ? hci_event_packet+0x5f8/0x31c0 [bluetooth]
      [ 2845.743742]  [<c03dfe19>] ? sock_def_readable+0x59/0x80
      [ 2845.743742]  [<c046c14d>] ? _read_unlock+0x1d/0x20
      [ 2845.743742]  [<f8178aa9>] ? hci_send_to_sock+0xe9/0x1d0 [bluetooth]
      [ 2845.743742]  [<c015388b>] ? trace_hardirqs_on+0xb/0x10
      [ 2845.743742]  [<f816fa6a>] ? hci_rx_task+0x2ba/0x490 [bluetooth]
      [ 2845.743742]  [<c0133661>] ? tasklet_action+0x31/0xc0
      [ 2845.743742]  [<c013367c>] ? tasklet_action+0x4c/0xc0
      [ 2845.743742]  [<c0132eb7>] ? __do_softirq+0xa7/0x170
      [ 2845.743742]  [<c0116dec>] ? ack_apic_level+0x5c/0x1c0
      [ 2845.743742]  [<c0132fd7>] ? do_softirq+0x57/0x60
      [ 2845.743742]  [<c01333dc>] ? irq_exit+0x7c/0x90
      [ 2845.743742]  [<c01055bb>] ? do_IRQ+0x4b/0x90
      [ 2845.743742]  [<c01333d5>] ? irq_exit+0x75/0x90
      [ 2845.743742]  [<c010392c>] ? common_interrupt+0x2c/0x34
      [ 2845.743742]  [<c010a14f>] ? mwait_idle+0x4f/0x70
      [ 2845.743742]  [<c0101c05>] ? cpu_idle+0x65/0xb0
      [ 2845.743742]  [<c045731e>] ? rest_init+0x4e/0x60
      [ 2845.743742] Code: 0f 84 69 02 00 00 83 ff 07 0f 87 1e 06 00 00 85 ff 0f 85 08 05 00 00 8b 4d cc 8b 49 04 85 c9 89 4d d4 0f 84 f7 04 00 00 8b 75 d4 <f0> ff 86 c4 00 00 00 89 f0 e8 56 a9 ff ff 85 c0 0f 85 6e 03 00
      [ 2845.743742] EIP: [<c015515c>] __lock_acquire+0x6c/0xa80 SS:ESP 0068:c064fcc8
      [ 2845.743742] ---[ end trace 4c985b38f022279f ]---
      [ 2845.743742] Kernel panic - not syncing: Fatal exception in interrupt
      [ 2845.743742] ------------[ cut here ]------------
      [ 2845.743742] WARNING: at kernel/smp.c:329 smp_call_function_many+0x151/0x200()
      [ 2845.743742] Hardware name: Dell DM051
      [ 2845.743742] Modules linked in: btusb netconsole snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth vfat fuse snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 snd_timer psmouse usbserial snd 3c59x e100 serio_raw soundcore i2c_i801 intel_agp mii agpgart snd_page_alloc rtc_cmos rtc_core thermal processor rtc_lib button thermal_sys sg evdev
      [ 2845.743742] Pid: 0, comm: swapper Tainted: G      D    2.6.29-rc5-smp #54
      [ 2845.743742] Call Trace:
      [ 2845.743742]  [<c012e076>] warn_slowpath+0x86/0xa0
      [ 2845.743742]  [<c015041b>] ? trace_hardirqs_off+0xb/0x10
      [ 2845.743742]  [<c0146384>] ? up+0x14/0x40
      [ 2845.743742]  [<c012e661>] ? release_console_sem+0x31/0x1e0
      [ 2845.743742]  [<c046c8ab>] ? _spin_lock_irqsave+0x6b/0x80
      [ 2845.743742]  [<c015041b>] ? trace_hardirqs_off+0xb/0x10
      [ 2845.743742]  [<c046c900>] ? _read_lock_irqsave+0x40/0x80
      [ 2845.743742]  [<c012e7f2>] ? release_console_sem+0x1c2/0x1e0
      [ 2845.743742]  [<c0146384>] ? up+0x14/0x40
      [ 2845.743742]  [<c015041b>] ? trace_hardirqs_off+0xb/0x10
      [ 2845.743742]  [<c046a3d7>] ? __mutex_unlock_slowpath+0x97/0x160
      [ 2845.743742]  [<c046a563>] ? mutex_trylock+0xb3/0x180
      [ 2845.743742]  [<c046a4a8>] ? mutex_unlock+0x8/0x10
      [ 2845.743742]  [<c015b991>] smp_call_function_many+0x151/0x200
      [ 2845.743742]  [<c010a1a0>] ? stop_this_cpu+0x0/0x40
      [ 2845.743742]  [<c015ba61>] smp_call_function+0x21/0x30
      [ 2845.743742]  [<c01137ae>] native_smp_send_stop+0x1e/0x50
      [ 2845.743742]  [<c012e0f5>] panic+0x55/0x110
      [ 2845.743742]  [<c01065a8>] oops_end+0xb8/0xc0
      [ 2845.743742]  [<c010668f>] die+0x4f/0x70
      [ 2845.743742]  [<c011a8c9>] do_page_fault+0x269/0x610
      [ 2845.743742]  [<c011a660>] ? do_page_fault+0x0/0x610
      [ 2845.743742]  [<c046cbaf>] error_code+0x77/0x7c
      [ 2845.743742]  [<c015515c>] ? __lock_acquire+0x6c/0xa80
      [ 2845.743742]  [<c0153732>] ? trace_hardirqs_on_caller+0x72/0x1c0
      [ 2845.743742]  [<c0155be6>] lock_acquire+0x76/0xa0
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c046c885>] _spin_lock_irqsave+0x45/0x80
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c03e1aad>] skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c03e1f94>] skb_queue_purge+0x14/0x20
      [ 2845.743742]  [<f8171f5a>] hci_conn_del+0x10a/0x1c0 [bluetooth]
      [ 2845.743742]  [<f81399c9>] ? l2cap_disconn_ind+0x59/0xb0 [l2cap]
      [ 2845.743742]  [<f81795ce>] ? hci_conn_del_sysfs+0x8e/0xd0 [bluetooth]
      [ 2845.743742]  [<f8175758>] hci_event_packet+0x5f8/0x31c0 [bluetooth]
      [ 2845.743742]  [<c03dfe19>] ? sock_def_readable+0x59/0x80
      [ 2845.743742]  [<c046c14d>] ? _read_unlock+0x1d/0x20
      [ 2845.743742]  [<f8178aa9>] ? hci_send_to_sock+0xe9/0x1d0 [bluetooth]
      [ 2845.743742]  [<c015388b>] ? trace_hardirqs_on+0xb/0x10
      [ 2845.743742]  [<f816fa6a>] hci_rx_task+0x2ba/0x490 [bluetooth]
      [ 2845.743742]  [<c0133661>] ? tasklet_action+0x31/0xc0
      [ 2845.743742]  [<c013367c>] tasklet_action+0x4c/0xc0
      [ 2845.743742]  [<c0132eb7>] __do_softirq+0xa7/0x170
      [ 2845.743742]  [<c0116dec>] ? ack_apic_level+0x5c/0x1c0
      [ 2845.743742]  [<c0132fd7>] do_softirq+0x57/0x60
      [ 2845.743742]  [<c01333dc>] irq_exit+0x7c/0x90
      [ 2845.743742]  [<c01055bb>] do_IRQ+0x4b/0x90
      [ 2845.743742]  [<c01333d5>] ? irq_exit+0x75/0x90
      [ 2845.743742]  [<c010392c>] common_interrupt+0x2c/0x34
      [ 2845.743742]  [<c010a14f>] ? mwait_idle+0x4f/0x70
      [ 2845.743742]  [<c0101c05>] cpu_idle+0x65/0xb0
      [ 2845.743742]  [<c045731e>] rest_init+0x4e/0x60
      [ 2845.743742] ---[ end trace 4c985b38f02227a0 ]---
      [ 2845.743742] ------------[ cut here ]------------
      [ 2845.743742] WARNING: at kernel/smp.c:226 smp_call_function_single+0x8e/0x110()
      [ 2845.743742] Hardware name: Dell DM051
      [ 2845.743742] Modules linked in: btusb netconsole snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth vfat fuse snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 snd_timer psmouse usbserial snd 3c59x e100 serio_raw soundcore i2c_i801 intel_agp mii agpgart snd_page_alloc rtc_cmos rtc_core thermal processor rtc_lib button thermal_sys sg evdev
      [ 2845.743742] Pid: 0, comm: swapper Tainted: G      D W  2.6.29-rc5-smp #54
      [ 2845.743742] Call Trace:
      [ 2845.743742]  [<c012e076>] warn_slowpath+0x86/0xa0
      [ 2845.743742]  [<c012e000>] ? warn_slowpath+0x10/0xa0
      [ 2845.743742]  [<c015041b>] ? trace_hardirqs_off+0xb/0x10
      [ 2845.743742]  [<c0146384>] ? up+0x14/0x40
      [ 2845.743742]  [<c012e661>] ? release_console_sem+0x31/0x1e0
      [ 2845.743742]  [<c046c8ab>] ? _spin_lock_irqsave+0x6b/0x80
      [ 2845.743742]  [<c015041b>] ? trace_hardirqs_off+0xb/0x10
      [ 2845.743742]  [<c046c900>] ? _read_lock_irqsave+0x40/0x80
      [ 2845.743742]  [<c012e7f2>] ? release_console_sem+0x1c2/0x1e0
      [ 2845.743742]  [<c0146384>] ? up+0x14/0x40
      [ 2845.743742]  [<c015b7be>] smp_call_function_single+0x8e/0x110
      [ 2845.743742]  [<c010a1a0>] ? stop_this_cpu+0x0/0x40
      [ 2845.743742]  [<c026d23f>] ? cpumask_next_and+0x1f/0x40
      [ 2845.743742]  [<c015b95a>] smp_call_function_many+0x11a/0x200
      [ 2845.743742]  [<c010a1a0>] ? stop_this_cpu+0x0/0x40
      [ 2845.743742]  [<c015ba61>] smp_call_function+0x21/0x30
      [ 2845.743742]  [<c01137ae>] native_smp_send_stop+0x1e/0x50
      [ 2845.743742]  [<c012e0f5>] panic+0x55/0x110
      [ 2845.743742]  [<c01065a8>] oops_end+0xb8/0xc0
      [ 2845.743742]  [<c010668f>] die+0x4f/0x70
      [ 2845.743742]  [<c011a8c9>] do_page_fault+0x269/0x610
      [ 2845.743742]  [<c011a660>] ? do_page_fault+0x0/0x610
      [ 2845.743742]  [<c046cbaf>] error_code+0x77/0x7c
      [ 2845.743742]  [<c015515c>] ? __lock_acquire+0x6c/0xa80
      [ 2845.743742]  [<c0153732>] ? trace_hardirqs_on_caller+0x72/0x1c0
      [ 2845.743742]  [<c0155be6>] lock_acquire+0x76/0xa0
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c046c885>] _spin_lock_irqsave+0x45/0x80
      [ 2845.743742]  [<c03e1aad>] ? skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c03e1aad>] skb_dequeue+0x1d/0x70
      [ 2845.743742]  [<c03e1f94>] skb_queue_purge+0x14/0x20
      [ 2845.743742]  [<f8171f5a>] hci_conn_del+0x10a/0x1c0 [bluetooth]
      [ 2845.743742]  [<f81399c9>] ? l2cap_disconn_ind+0x59/0xb0 [l2cap]
      [ 2845.743742]  [<f81795ce>] ? hci_conn_del_sysfs+0x8e/0xd0 [bluetooth]
      [ 2845.743742]  [<f8175758>] hci_event_packet+0x5f8/0x31c0 [bluetooth]
      [ 2845.743742]  [<c03dfe19>] ? sock_def_readable+0x59/0x80
      [ 2845.743742]  [<c046c14d>] ? _read_unlock+0x1d/0x20
      [ 2845.743742]  [<f8178aa9>] ? hci_send_to_sock+0xe9/0x1d0 [bluetooth]
      [ 2845.743742]  [<c015388b>] ? trace_hardirqs_on+0xb/0x10
      [ 2845.743742]  [<f816fa6a>] hci_rx_task+0x2ba/0x490 [bluetooth]
      [ 2845.743742]  [<c0133661>] ? tasklet_action+0x31/0xc0
      [ 2845.743742]  [<c013367c>] tasklet_action+0x4c/0xc0
      [ 2845.743742]  [<c0132eb7>] __do_softirq+0xa7/0x170
      [ 2845.743742]  [<c0116dec>] ? ack_apic_level+0x5c/0x1c0
      [ 2845.743742]  [<c0132fd7>] do_softirq+0x57/0x60
      [ 2845.743742]  [<c01333dc>] irq_exit+0x7c/0x90
      [ 2845.743742]  [<c01055bb>] do_IRQ+0x4b/0x90
      [ 2845.743742]  [<c01333d5>] ? irq_exit+0x75/0x90
      [ 2845.743742]  [<c010392c>] common_interrupt+0x2c/0x34
      [ 2845.743742]  [<c010a14f>] ? mwait_idle+0x4f/0x70
      [ 2845.743742]  [<c0101c05>] cpu_idle+0x65/0xb0
      [ 2845.743742]  [<c045731e>] rest_init+0x4e/0x60
      [ 2845.743742] ---[ end trace 4c985b38f02227a1 ]---
      [ 2845.743742] Rebooting in 3 seconds..
      
      My logitec bluetooth mouse trying connect to pc, but
      pc side reject the connection again and again. then panic happens.
      
      The reason is due to hci_conn_del_sysfs now called in hci_event_packet,
      the del work is done in a workqueue, so it's possible done before
      skb_queue_purge called.
      
      I move the hci_conn_del_sysfs after skb_queue_purge just as that before
      marcel's commit.
      
      Remove the hci_conn_del_sysfs in hci_conn_hash_flush as well due to
      hci_conn_del will deal with the work.
      Signed-off-by: default avatarDave Young <hidave.darkstar@gmail.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      2ae9a6be
    • Marcel Holtmann's avatar
      Bluetooth: Permit BT_SECURITY also for L2CAP raw sockets · 2526d3d8
      Marcel Holtmann authored
      Userspace pairing code can be simplified if it doesn't have to fall
      back to using L2CAP_LM in the case of L2CAP raw sockets. This patch
      allows the BT_SECURITY socket option to be used for these sockets.
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@nokia.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      2526d3d8
    • Marcel Holtmann's avatar
      Bluetooth: Fix RFCOMM usage of in-kernel L2CAP sockets · 37e62f55
      Marcel Holtmann authored
      The CID value of L2CAP sockets need to be set to zero. All userspace
      applications do this via memset() on the sockaddr_l2 structure. The
      RFCOMM implementation uses in-kernel L2CAP sockets and so it has to
      make sure that l2_cid is set to zero.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      37e62f55
    • Marcel Holtmann's avatar
      Bluetooth: Disallow usage of L2CAP CID setting for now · 2a517ca6
      Marcel Holtmann authored
      In the future the L2CAP layer will have full support for fixed channels
      and right now it already can export the channel assignment, but for the
      functions bind() and connect() the usage of only CID 0 is allowed. This
      allows an easy detection if the kernel supports fixed channels or not,
      because otherwise it would impossible for application to tell.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      2a517ca6
    • Marcel Holtmann's avatar
      Bluetooth: Change RFCOMM to use BT_CONNECT2 for BT_DEFER_SETUP · 8bf47941
      Marcel Holtmann authored
      When BT_DEFER_SETUP is enabled on a RFCOMM socket, then switch its
      current state from BT_OPEN to BT_CONNECT2. This gives the Bluetooth
      core a unified way to handle L2CAP and RFCOMM sockets. The BT_CONNECT2
      state is designated for incoming connections.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      8bf47941
    • Marcel Holtmann's avatar
      Bluetooth: Fix poll() misbehavior when using BT_DEFER_SETUP · d5f2d2be
      Marcel Holtmann authored
      When BT_DEFER_SETUP has been enabled on a Bluetooth socket it keeps
      signaling POLLIN all the time. This is a wrong behavior. The POLLIN
      should only be signaled if the client socket is in BT_CONNECT2 state
      and the parent has been BT_DEFER_SETUP enabled.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      d5f2d2be
    • Marcel Holtmann's avatar
      Bluetooth: Set authentication requirement before requesting it · 96a31833
      Marcel Holtmann authored
      The authentication requirement got only updated when the security level
      increased. This is a wrong behavior. The authentication requirement is
      read by the Bluetooth daemon to make proper decisions when handling the
      IO capabilities exchange. So set the value that is currently expected by
      the higher layers like L2CAP and RFCOMM.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      96a31833
    • Marcel Holtmann's avatar
      Bluetooth: Fix authentication requirements for L2CAP security check · 00ae4af9
      Marcel Holtmann authored
      The L2CAP layer can trigger the authentication via an ACL connection or
      later on to increase the security level. When increasing the security
      level it didn't use the same authentication requirements when triggering
      a new ACL connection. Make sure that exactly the same authentication
      requirements are used. The only exception here are the L2CAP raw sockets
      which are only used for dedicated bonding.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      00ae4af9
    • Marcel Holtmann's avatar
      Bluetooth: Ask upper layers for HCI disconnect reason · 2950f21a
      Marcel Holtmann authored
      Some of the qualification tests demand that in case of failures in L2CAP
      the HCI disconnect should indicate a reason why L2CAP fails. This is a
      bluntly layer violation since multiple L2CAP connections could be using
      the same ACL and thus forcing a disconnect reason is not a good idea.
      
      To comply with the Bluetooth test specification, the disconnect reason
      is now stored in the L2CAP connection structure and every time a new
      L2CAP channel is added it will set back to its default. So only in the
      case where the L2CAP channel with the disconnect reason is really the
      last one, it will propagated to the HCI layer.
      
      The HCI layer has been extended with a disconnect indication that allows
      it to ask upper layers for a disconnect reason. The upper layer must not
      support this callback and in that case it will nicely default to the
      existing behavior. If an upper layer like L2CAP can provide a disconnect
      reason that one will be used to disconnect the ACL or SCO link.
      
      No modification to the ACL disconnect timeout have been made. So in case
      of Linux to Linux connection the initiator will disconnect the ACL link
      before the acceptor side can signal the specific disconnect reason. That
      is perfectly fine since Linux doesn't make use of this value anyway. The
      L2CAP layer has a perfect valid error code for rejecting connection due
      to a security violation. It is unclear why the Bluetooth specification
      insists on having specific HCI disconnect reason.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      2950f21a
    • Marcel Holtmann's avatar
      Bluetooth: Add CID field to L2CAP socket address structure · f29972de
      Marcel Holtmann authored
      In preparation for L2CAP fixed channel support, the CID value of a
      L2CAP connection needs to be accessible via the socket interface. The
      CID is the connection identifier and exists as source and destination
      value. So extend the L2CAP socket address structure with this field and
      change getsockname() and getpeername() to fill it in.
      
      The bind() and connect() functions have been modified to handle L2CAP
      socket address structures of variable sizes. This makes them future
      proof if additional fields need to be added.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      f29972de
    • Marcel Holtmann's avatar
      Bluetooth: Request L2CAP fixed channel list if available · e1027a7c
      Marcel Holtmann authored
      If the extended features mask indicates support for fixed channels,
      request the list of available fixed channels. This also enables the
      fixed channel features bit so remote implementations can request
      information about it. Currently only the signal channel will be
      listed.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      e1027a7c
    • Marcel Holtmann's avatar
      Bluetooth: Don't enforce authentication for L2CAP PSM 1 and 3 · 435fef20
      Marcel Holtmann authored
      The recommendation for the L2CAP PSM 1 (SDP) is to not use any kind
      of authentication or encryption. So don't trigger authentication
      for incoming and outgoing SDP connections.
      
      For L2CAP PSM 3 (RFCOMM) there is no clear requirement, but with
      Bluetooth 2.1 the initiator is required to enable authentication
      and encryption first and this gets enforced. So there is no need
      to trigger an additional authentication step. The RFCOMM service
      security will make sure that a secure enough link key is present.
      
      When the encryption gets enabled after the SDP connection setup,
      then switch the security level from SDP to low security.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      435fef20
    • Marcel Holtmann's avatar
      Bluetooth: Fix double L2CAP connection request · 6a8d3010
      Marcel Holtmann authored
      If the remote L2CAP server uses authentication pending stage and
      encryption is enabled it can happen that a L2CAP connection request is
      sent twice due to a race condition in the connection state machine.
      
      When the remote side indicates any kind of connection pending, then
      track this state and skip sending of L2CAP commands for this period.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      6a8d3010
    • Marcel Holtmann's avatar
      Bluetooth: Fix race condition with L2CAP information request · 984947dc
      Marcel Holtmann authored
      When two L2CAP connections are requested quickly after the ACL link has
      been established there exists a window for a race condition where a
      connection request is sent before the information response has been
      received. Any connection request should only be sent after an exchange
      of the extended features mask has been finished.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      984947dc