- 29 Dec, 2022 37 commits
-
-
Sean Christopherson authored
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that all implementations are nops. No functional change intended. Signed-off-by:
Sean Christopherson <seanjc@google.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Acked-by:
Anup Patel <anup@brainfault.org> Message-Id: <20221130230934.1014142-10-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Now that kvm_arch_hardware_setup() is called immediately after kvm_arch_init(), fold the guts of kvm_arch_hardware_(un)setup() into kvm_arch_{init,exit}() as a step towards dropping one of the hooks. To avoid having to unwind various setup, e.g registration of several notifiers, slot in the vendor hardware setup before the registration of said notifiers and callbacks. Introducing a functional change while moving code is less than ideal, but the alternative is adding a pile of unwinding code, which is much more error prone, e.g. several attempts to move the setup code verbatim all introduced bugs. Add a comment to document that kvm_ops_update() is effectively the point of no return, e.g. it sets the kvm_x86_ops.hardware_enable canary and so needs to be unwound. Signed-off-by: -
Sean Christopherson authored
Move kvm_arch_init()'s call to kvm_timer_init() down a few lines below the XCR0 configuration code. A future patch will move hardware setup into kvm_arch_init() and slot in vendor hardware setup before the call to kvm_timer_init() so that timer initialization (among other stuff) doesn't need to be unwound if vendor setup fails. XCR0 setup on the other hand needs to happen before vendor hardware setup. Signed-off-by:
-
Sean Christopherson authored
Now that kvm_arch_hardware_setup() is called immediately after kvm_arch_init(), fold the guts of kvm_arch_hardware_(un)setup() into kvm_arch_{init,exit}() as a step towards dropping one of the hooks. No functional change intended. Signed-off-by:Eric Farman <farman@linux.ibm.com> Message-Id: <20221130230934.1014142-7-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
In preparation for folding kvm_arch_hardware_setup() into kvm_arch_init(), unwind initialization one step at a time instead of simply calling kvm_arch_exit(). Using kvm_arch_exit() regardless of which initialization step failed relies on all affected state playing nice with being undone even if said state wasn't first setup. That holds true for state that is currently configured by kvm_arch_init(), but not for state that's handled by kvm_arch_hardware_setup(), e.g. calling gmap_unregister_pte_notifier() without first registering a notifier would result in list corruption due to attempting to delete an entry that was never added to the list. Signed-off-by:
-
Sean Christopherson authored
Move the call to kvm_vfio_ops_exit() further up kvm_exit() to try and bring some amount of symmetry to the setup order in kvm_init(), and more importantly so that the arch hooks are invoked dead last by kvm_exit(). This will allow arch code to move away from the arch hooks without any change in ordering between arch code and common code in kvm_exit(). That kvm_vfio_ops_exit() is called last appears to be 100% arbitrary. It was bolted on after the fact by commit 571ee1b6 ("kvm: vfio: fix unregister kvm_device_ops of vfio"). The nullified kvm_device_ops_table is also local to kvm_main.c and is used only when there are active VMs, so unless arch code is doing something truly bizarre, nullifying the table earlier in kvm_exit() is little more than a nop. Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
-
Sean Christopherson authored
Allocate cpus_hardware_enabled after arch hardware setup so that arch "init" and "hardware setup" are called back-to-back and thus can be combined in a future patch. cpus_hardware_enabled is never used before kvm_create_vm(), i.e. doesn't have a dependency with hardware setup and only needs to be allocated before /dev/kvm is exposed to userspace. Free the object before the arch hooks are invoked to maintain symmetry, and so that arch code can move away from the hooks without having to worry about ordering changes. Signed-off-by:
Yuan Yao <yuan.yao@intel.com> Message-Id: <20221130230934.1014142-4-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Move initialization of KVM's IRQ FD workqueue below arch hardware setup as a step towards consolidating arch "init" and "hardware setup", and eventually towards dropping the hooks entirely. There is no dependency on the workqueue being created before hardware setup, the workqueue is used only when destroying VMs, i.e. only needs to be created before /dev/kvm is exposed to userspace. Move the destruction of the workqueue before the arch hooks to maintain symmetry, and so that arch code can move away from the hooks without having to worry about ordering changes. Reword the comment about kvm_irqfd_init() needing to come after kvm_arch_init() to call out that kvm_arch_init() must come before common KVM does _anything_, as x86 very subtly relies on that behavior to deal with multiple calls to kvm_init(), e.g. if userspace attempts to load kvm_amd.ko and kvm_intel.ko. Tag the code with a FIXME, as x86's subtle requirement is gross, and invoking an arch callback as the very first action in a helper that is called only from arch code is silly. Signed-off-by:
-
Sean Christopherson authored
Register /dev/kvm, i.e. expose KVM to userspace, only after all other setup has completed. Once /dev/kvm is exposed, userspace can start invoking KVM ioctls, creating VMs, etc... If userspace creates a VM before KVM is done with its configuration, bad things may happen, e.g. KVM will fail to properly migrate vCPU state if a VM is created before KVM has registered preemption notifiers. Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
x86: * Change tdp_mmu to a read-only parameter * Separate TDP and shadow MMU page fault paths * Enable Hyper-V invariant TSC control selftests: * Use TAP interface for kvm_binary_stats_test and tsc_msrs_test Signed-off-by: -
Vitaly Kuznetsov authored
Add a test for the newly introduced Hyper-V invariant TSC control feature: - HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it. - BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of architectural invariant TSC (CPUID.80000007H:EDX[8]) bit. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
-
Vitaly Kuznetsov authored
Enhance 'hyperv_features' selftest by adding a check that KVM preserves values written to PV MSRs. Two MSRs are, however, 'special': - HV_X64_MSR_EOI as it is a 'write-only' MSR, - HV_X64_MSR_RESET as it always reads as '0'. The later doesn't require any special handling right now because the test never writes anything besides '0' to the MSR, leave a TODO node about the fact. Suggested-by:
-
Vitaly Kuznetsov authored
hyperv_features test needs to set certain CPUID bits in Hyper-V feature leaves but instead of open coding this, common KVM_X86_CPU_FEATURE() infrastructure can be used. Signed-off-by:
-
Vitaly Kuznetsov authored
It may not be clear what 'msr->available' means. The test actually checks that accessing the particular MSR doesn't cause #GP, rename the variable accordingly. While on it, use 'true'/'false' instead of '1'/'0' for 'write'/ 'fault_expected' as these are boolean. Signed-off-by:
-
Vitaly Kuznetsov authored
Normally, genuine Hyper-V doesn't expose architectural invariant TSC (CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR (HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the PV MSR is set, invariant TSC bit starts to show up in CPUID. When the feature is exposed to Hyper-V guests, reenlightenment becomes unneeded. Add the feature to KVM. Keep CPUID output intact when the feature wasn't exposed to L1 and implement the required logic for hiding invariant TSC when the feature was exposed and invariant TSC control MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to disable the feature once it was enabled. For the reference, for linux guests, support for the feature was added in commit dce7cd62 ("x86/hyperv: Allow guests to enable InvariantTSC"). Signed-off-by:
-
Vitaly Kuznetsov authored
CPUID_8000_0007_EDX may come handy when X86_FEATURE_CONSTANT_TSC needs to be checked. No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
Avoid open coding BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL by adding a dedicated define. While there's only one user at this moment, the upcoming KVM implementation of Hyper-V Invariant TSC feature will need to use it as well. Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Sean Christopherson authored
When handling direct page faults, pivot on the TDP MMU being globally enabled instead of checking if the target MMU is a TDP MMU. Now that the TDP MMU is all-or-nothing, if the TDP MMU is enabled, KVM will reach direct_page_fault() if and only if the MMU is a TDP MMU. When TDP is enabled (obviously required for the TDP MMU), only non-nested TDP page faults reach direct_page_fault(), i.e. nonpaging MMUs are impossible, as NPT requires paging to be enabled and EPT faults use ept_page_fault(). Signed-off-by:
-
Sean Christopherson authored
Simplify and optimize the logic for detecting if the current/active MMU is a TDP MMU. If the TDP MMU is globally enabled, then the active MMU is a TDP MMU if it is direct. When TDP is enabled, so called nonpaging MMUs are never used as the only form of shadow paging KVM uses is for nested TDP, and the active MMU can't be direct in that case. Rename the helper and take the vCPU instead of an arbitrary MMU, as nonpaging MMUs can show up in the walk_mmu if L1 is using nested TDP and L2 has paging disabled. Taking the vCPU has the added bonus of cleaning up the callers, all of which check the current MMU but wrap code that consumes the vCPU. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use is_tdp_mmu_page() instead of querying sp->tdp_mmu_page directly so that all users benefit if KVM ever finds a way to optimize the logic. No functional change intended. Signed-off-by:
-
David Matlack authored
Rename __direct_map() to direct_map() since the leading underscores are unnecessary. This also makes the page fault handler names more consistent: kvm_tdp_mmu_page_fault() calls kvm_tdp_mmu_map() and direct_page_fault() calls direct_map(). Opportunistically make some trivial cleanups to comments that had to be modified anyway since they mentioned __direct_map(). Specifically, use "()" when referring to functions, and include kvm_tdp_mmu_map() among the various callers of disallowed_hugepage_adjust(). No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Reviewed-by:
Isaku Yamahata <isaku.yamahata@intel.com> Signed-off-by:
-
David Matlack authored
Stop calling make_mmu_pages_available() when handling TDP MMU faults. The TDP MMU does not participate in the "available MMU pages" tracking and limiting so calling this function is unnecessary work when handling TDP MMU faults. Signed-off-by:
-
David Matlack authored
Split out the page fault handling for the TDP MMU to a separate function. This creates some duplicate code, but makes the TDP MMU fault handler simpler to read by eliminating branches and will enable future cleanups by allowing the TDP MMU and non-TDP MMU fault paths to diverge. Only compile in the TDP MMU fault handler for 64-bit builds since kvm_tdp_mmu_map() does not exist in 32-bit builds. No functional change intended. Signed-off-by:
-
David Matlack authored
Move the initialization of fault.{gfn,slot} earlier in the page fault handling code for fully direct MMUs. This will enable a future commit to split out TDP MMU page fault handling without needing to duplicate the initialization of these 2 fields. Opportunistically take advantage of the fact that fault.gfn is initialized in kvm_tdp_page_fault() rather than recomputing it from fault->addr. No functional change intended. Signed-off-by: -
David Matlack authored
Handle faults on GFNs that do not have a backing memslot in kvm_faultin_pfn() and drop handle_abnormal_pfn(). This eliminates duplicate code in the various page fault handlers. Opportunistically tweak the comment about handling gfn > host.MAXPHYADDR to reflect that the effect of returning RET_PF_EMULATE at that point is to avoid creating an MMIO SPTE for such GFNs. No functional change intended. Signed-off-by:
-
David Matlack authored
Pass the kvm_page_fault struct down to kvm_handle_error_pfn() to avoid a memslot lookup when handling KVM_PFN_ERR_HWPOISON. Opportunistically move the gfn_to_hva_memslot() call and @current down into kvm_send_hwpoison_signal() to cut down on line lengths. No functional change intended. Signed-off-by:
-
David Matlack authored
Handle error PFNs in kvm_faultin_pfn() rather than relying on the caller to invoke handle_abnormal_pfn() after kvm_faultin_pfn(). Opportunistically rename kvm_handle_bad_page() to kvm_handle_error_pfn() to make it more consistent with is_error_pfn(). This commit moves KVM closer to being able to drop handle_abnormal_pfn(), which will reduce the amount of duplicate code in the various page fault handlers. No functional change intended. Signed-off-by:
-
David Matlack authored
Grab mmu_invalidate_seq in kvm_faultin_pfn() and stash it in struct kvm_page_fault. The eliminates duplicate code and reduces the amount of parameters needed for is_page_fault_stale(). Preemptively split out __kvm_faultin_pfn() to a separate function for use in subsequent commits. No functional change intended. Signed-off-by:
-
David Matlack authored
Move kvm_mmu_{init,uninit}_tdp_mmu() behind tdp_mmu_enabled. This makes these functions consistent with the rest of the calls into the TDP MMU from mmu.c, and which is now possible since tdp_mmu_enabled is only modified when the x86 vendor module is loaded. i.e. It will never change during the lifetime of a VM. This change also enabled removing the stub definitions for 32-bit KVM, as the compiler will just optimize the calls out like it does for all the other TDP MMU functions. No functional change intended. Signed-off-by: -
David Matlack authored
Change tdp_mmu to a read-only parameter and drop the per-vm tdp_mmu_enabled. For 32-bit KVM, make tdp_mmu_enabled a macro that is always false so that the compiler can continue omitting cals to the TDP MMU. The TDP MMU was introduced in 5.10 and has been enabled by default since 5.15. At this point there are no known functionality gaps between the TDP MMU and the shadow MMU, and the TDP MMU uses less memory and scales better with the number of vCPUs. In other words, there is no good reason to disable the TDP MMU on a live system. Purposely do not drop tdp_mmu=N support (i.e. do not force 64-bit KVM to always use the TDP MMU) since tdp_mmu=N is still used to get test coverage of KVM's shadow MMU TDP support, which is used in 32-bit KVM. Signed-off-by:
Kai Huang <kai.huang@intel.com> Signed-off-by:
-
Thomas Huth authored
Let's add some output here so that the user has some feedback about what is being run. Signed-off-by:
Thomas Huth <thuth@redhat.com> Message-Id: <20221004093131.40392-4-thuth@redhat.com> Signed-off-by:
-
Thomas Huth authored
The kvm_binary_stats_test test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user how far it did proceed already. Thus let's make this a little bit more user-friendly and include some TAP output via the kselftest.h interface. Signed-off-by:
Andrew Jones <andrew.jones@linux.dev> Message-Id: <20221004093131.40392-2-thuth@redhat.com> Signed-off-by:
-
Lai Jiangshan authored
Since the commit 65855ed8 ("KVM: X86: Synchronize the shadow pagetable before link it"), no sp would be linked with sp->unsync_children = 1. So make it WARN if it is the case. Signed-off-by:
Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20221212090106.378206-1-jiangshanlai@gmail.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Commit 9bcb9065 ("KVM: VMX: Get rid of eVMCS specific VMX controls sanitization") dropped 'vmcs_conf' sanitization for KVM-on-Hyper-V because there's no known Hyper-V version which would expose a feature unsupported in eVMCS in VMX feature MSRs. This works well for all currently existing Hyper-V version, however, future Hyper-V versions may add features which are supported by KVM and are currently missing in eVMCSv1 definition (e.g. APIC virtualization, PML,...). When this happens, existing KVMs will get broken. With the inverted 'unsupported by eVMCSv1' checks, we can resurrect vmcs_conf sanitization and make KVM future proof. Signed-off-by:
-
Vitaly Kuznetsov authored
In preparation to restoring vmcs_conf sanitization for KVM-on-Hyper-V, (and for completeness) add tertiary VM-execution controls to 'evmcs_supported_ctrls'. No functional change intended as KVM doesn't yet expose MSR_IA32_VMX_PROCBASED_CTLS3 to its guests. Signed-off-by:
-
Vitaly Kuznetsov authored
When a new feature gets implemented in KVM, EVMCS1_UNSUPPORTED_* defines need to be adjusted to avoid the situation when the feature is exposed to the guest but there's no corresponding eVMCS field[s] for it. This is not obvious and fragile. Invert 'unsupported by eVMCSv1' check and make it 'supported by eVMCSv1' instead, this way it's much harder to make a mistake. New features will get added to EVMCS1_SUPPORTED_* defines when the corresponding fields are added to eVMCS definition. No functional change intended. EVMCS1_SUPPORTED_* defines are composed by taking KVM_{REQUIRED,OPTIONAL}_VMX_ defines and filtering out what was previously known as EVMCS1_UNSUPPORTED_*. From all the controls, SECONDARY_EXEC_TSC_SCALING requires special handling as it's actually present in eVMCSv1 definition but is not currently supported for Hyper-V-on-KVM, just for KVM-on-Hyper-V. As evmcs_supported_ctrls will be used for both scenarios, just add it there instead of EVMCS1_SUPPORTED_2NDEXEC. Signed-off-by: -
Vitaly Kuznetsov authored
The only unsupported primary processor-based VM-execution control at the moment is CPU_BASED_ACTIVATE_TERTIARY_CONTROLS and KVM doesn't expose it in nested VMX feature MSRs anyway (see nested_vmx_setup_ctls_msrs()) but in preparation to inverting "unsupported with eVMCS" checks (and for completeness) it's better to sanitize MSR_IA32_VMX_PROCBASED_CTLS/ MSR_IA32_VMX_TRUE_PROCBASED_CTLS too. No functional change intended. Signed-off-by:
-
- 28 Dec, 2022 3 commits
-
-
Paolo Bonzini authored
Commit 8fda37cf ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test because it placed a "pop rbp" instruction after vmmcall. While this is correct and mimics what is done in the VMX case, this particular test expects a ud2 instruction right after the vmmcall, so that it can skip over it in the L1 part of the test. Inline a suitably-modified version of vmmcall() to restore the functionality of the test. Fixes: 8fda37cf ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()" Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20221130181147.9911-1-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Currently only the locking order of SRCU vs kvm->slots_arch_lock and kvm->slots_lock is documented. Extend this to kvm->lock since Xen emulation got it terribly wrong. Signed-off-by: -
Paolo Bonzini authored
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running, if that happened it could cause a deadlock. This is due to kvm_xen_eventfd_reset() doing a synchronize_srcu() inside a kvm->lock critical section. To avoid this, first collect all the evtchnfd objects in an array and free all of them once the kvm->lock critical section is over and th SRCU grace period has expired. Reported-by:
Michal Luczaj <mhal@rbox.co> Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
