mlx5_core_err already prints the name of the device.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 4ec9e7b0 ("net/mlx5: DR, Expose steering domain functionality")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The memory return by kzalloc() has already be set to zero, so
remove useless memset(0).
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Don't clear MLX5E_SQ_STATE_ENABLED on error in mlx5e_open_txqsq and
mlx5e_open_icosq, because it's not set there, and is 0 by default.

Fixes: acc6c595 ("net/mlx5e: Split open/close channels to stages")
Fixes: 9d18b514 ("net/mlx5e: Split open/close ICOSQ into stages")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

SKB parameter is no longer used in tx_post_resync_dump(),
remove it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR. It is better
to use it directly. hence just replace it.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The error return from a call to mlx5_flow_namespace_set_peer is not
being assigned to variable err and hence the error check following
the call is currently not working.  Fix this by assigning ret as
intended.

Addresses-Coverity: ("Logically dead code")
Fixes: 8463daf1 ("net/mlx5: Add support to use SMFS in switchdev mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message.
Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This function was removed in the cited commit below.

Fixes: 13e509a4 ("net/mlx5e: Remove leftover code from the PF netdev being uplink rep")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5 is dependent on IPv6 tristate since we use ipv6's nd_tbl directly,
alternatively we can use ipv6_stub->nd_tbl and remove the dependency.
Reported-by: Walter Harms <wharms@bfs.de>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When MLX5_CORE=y and PCI_HYPERV_INTERFACE=m, below errors are found:
drivers/net/ethernet/mellanox/mlx5/core/en_main.o: In function `mlx5e_nic_enable':
en_main.c:(.text+0xb649): undefined reference to `mlx5e_hv_vhca_stats_create'
drivers/net/ethernet/mellanox/mlx5/core/en_main.o: In function `mlx5e_nic_disable':
en_main.c:(.text+0xb8c4): undefined reference to `mlx5e_hv_vhca_stats_destroy'

Fix this by making MLX5_CORE imply PCI_HYPERV_INTERFACE.

Fixes: cef35af3 ("net/mlx5e: Add mlx5e HV VHCA stats agent")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Cited patch have an issue in WARN_ON_ONCE check, with wrong address ranges
are compared. Fix that by changing pointer types from u64* to void*. This
will also make code simpler to read.

In addition mlx5e_hv_vhca_fill_ring_stats can get void pointer, so remove
the unnecessary casting when calling it.

Found by static checker:
drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c:41 mlx5e_hv_vhca_fill_stats()
warn: potential pointer math issue ('buf' is a u64 pointer)

Fixes: cef35af3 ("net/mlx5e: Add mlx5e HV VHCA stats agent")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The UPS feature only works for runtime suspend, so UPS flags only
need to be set before enabling runtime suspend. Therefore, I create
a struct to record relative information, and use it before runtime
suspend.

All chips could record such information, even though not all of
them support the feature of UPS. Then, some functions could be
combined.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the static keyword to the front of declaration of g_dsaf_mode_match,
and resolve the following compiler warning that can be seen when building
with warnings enabled (W=1):

drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:27:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the static keyword to the front of declaration of iwarp_state_names,
and resolve the following compiler warning that can be seen when building
with warnings enabled (W=1):

drivers/net/ethernet/qlogic/qed/qed_iwarp.c:385:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]

Also, resolve checkpatch.pl script warning:

WARNING: static const char * array should probably be
  static const char * const
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Harini Katakam says:

====================
Fix GMII2RGMII private field

Fix the usage of external phy's priv field by gmii2rgmii driver.

Based on net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use set/get drv data in phydev's mdio device instead. Phy device priv
field maybe used by the external phy driver and should not be
overwritten.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add set/get drv_data helpers for mdio device.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arseny Solokha says:

====================
gianfar: some assorted cleanup

This is a cleanup series for the gianfar Ethernet driver, following up a
discussion in [1]. It is intended to precede a conversion of gianfar from
PHYLIB to PHYLINK API, which will be submitted later in its version 2.
However, it won't make a conversion cleaner, except for the last patch in
this series. Obviously this series is not intended for -stable.

The first patch looks super controversial to me, as it moves lots of code
around for the sole purpose of getting rid of static forward declarations
in two translation units. On the other hand, this change is purely
mechanical and cannot do any harm other than cluttering git blame output.
I can prepare an alternative patch for only swapping adjacent functions
around, if necessary.

The second patch is a trivial follow-up to the first one, making functions
that are only called from the same translation unit static.

The third patch removes some now unused macro and structure definitions
from gianfar.h, slipped away from various cleanups in the past.

The fourth patch, also suggested in [1], makes the driver consistently use
PHY connection type value obtained from a Device Tree node, instead of
ignoring it and using the one auto-detected by MAC, when connecting to PHY.
Obviously a value has to be specified correctly in DT source, or omitted
altogether, in which case the driver will fall back to auto-detection. When
querying a DT node, the driver will also take both applicable properties
into account by making a proper API call instead of open-coding the lookup
half-way correctly.

[1] https://lore.kernel.org/netdev/CA+h21hruqt6nGG5ksDSwrGH_w5GtGF4fjAMCWJne7QJrjusERQ@mail.gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Historically, gianfar only used phy-connection-type DT property when
connected to PHY in the rgmii-id mode. It ignored the property otherwise,
relying on the connection type auto-detection carried out by MAC and
providing that reconstructed mode to of_phy_connect(). It also did not
consider alternative phy-mode property at all.

Make the driver properly query DT node for PHY connection type first and
use an obtained value if it was specified there. Otherwise, if a particular
DT relies on connection type auto-detection, fall back to reconstructing
the value from MAC registers, as before.
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove now unused macro and structure definitions from gianfar.h that have
accumulated there over time.
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make functions that do not have callers outside the translation unit they
are defined in static.
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove forward declarations of various static functions located in two
driver implementation files and rearrange the corresponding definitions
accordingly.

This patch only introduces mechanical changes, namely it removes forward
declarations and moves function definitions around; it does not change any
functionality.
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements for -next

Couple of improvements for -next tree. More info in commit logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test to validate the Jumbo Frame support in stmmac in single
channel and multichannel mode.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We are already doing it by default in the TX path so we can also enable
Jumbo Frame support in the RX path independently of MTU value.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maximum MTU for XGMAC cores is 16k thus the check for presence of XGMAC
shall be done first in order to assign correct value.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RAVSEL means that only RX side is available for AVB features. As we use
both TX and RX features we need to check if RAVSEL is selected and
disable AVB if only RX side is available.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When RX Watchdog is disabled its currently not possible to configure TX
coalesce settings. Let user configure it anyway.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only consider that we have an error when HW Timestamping is not enabled
as this can give false positives due to the fact the RX Timestamping in
XGMAC and GMAC cores comes from context descriptors.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement a test for ARP Offload feature.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the ARP Offload feature in XGMAC cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds the selftests for L3 and L4 filters with DA/SA/DP/SP support.

Changes from v1:
	- Reduce stack usage (kbuild test robot)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement filters for Layer 3 and Layer 4 using TC Flower API. Add the
corresponding callbacks in XGMAC core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As we can still use the remaining TC callbacks, e.g. CBS. We should not
fail in the initialization only because RX Parser is not available.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the handling of Receive Buffer Unavailable interrupt in the DMA
handler of XGMAC cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can do better than just return 1 to userspace. Lets return a proper
Linux error code.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.4-20190904' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2019-09-04 j1939

this is a pull request for net-next/master consisting of 21 patches.

the first 12 patches are by me and target the CAN core infrastructure.
They clean up the names of variables , structs and struct members,
convert can_rx_register() to use max() instead of open coding it and
remove unneeded code from the can_pernet_exit() callback.

The next three patches are also by me and they introduce and make use of
the CAN midlayer private structure. It is used to hold protocol specific
per device data structures.

The next patch is by Oleksij Rempel, switches the
&net->can.rcvlists_lock from a spin_lock() to a spin_lock_bh(), so that
it can be used from NAPI (soft IRQ) context.

The next 4 patches are by Kurt Van Dijck, he first updates his email
address via mailmap and then extends sockaddr_can to include j1939
members.

The final patch is the collective effort of many entities (The j1939
authors: Oliver Hartkopp, Bastian Stender, Elenita Hinds, kbuild test
robot, Kurt Van Dijck, Maxime Jayat, Robin van der Gracht, Oleksij
Rempel, Marc Kleine-Budde). It adds support of SAE J1939 protocol to the
CAN networking stack.

SAE J1939 is the vehicle bus recommended practice used for communication
and diagnostics among vehicle components. Originating in the car and
heavy-duty truck industry in the United States, it is now widely used in
other parts of the world.

P.S.: This pull request doesn't invalidate my last pull request:
      "pull-request: can-next 2019-09-03".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Take only FIB events that are happening in init_net into account. No other
namespaces are supported.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>