Pull MTD fix from Boris Brezillon:
 "A SPI NOR fix to fix a timeout in the cadence QSPI controller driver"

* tag 'mtd/fixes-for-4.18-rc5' of git://git.infradead.org/linux-mtd:
  mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts

Pull kprobe fix from Steven Rostedt:
 "This fixes a memory leak in the kprobe code"

* tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobe: Release kprobe print_fmt properly

We don't release tk->tp.call.print_fmt when destroying
local uprobe. Also there's missing print_fmt kfree in
create_local_trace_kprobe error path.

Link: http://lkml.kernel.org/r/20180709141906.2390-1-jolsa@kernel.org

Cc: stable@vger.kernel.org
Fixes: e12f03d7 ("perf/core: Implement the 'perf_kprobe' PMU")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull libata fixes from Tejun Heo:

 - Jens's patches to expand the usable command depth from 31 to 32 broke
   sata_fsl due to a subtle command iteration bug. Fixed by introducing
   explicit iteration helpers and using the correct variant.

 - On some laptops, enabling LPM by default reportedly led to occasional
   hard hangs. Blacklist the affected cases.

 - Other misc fixes / changes.

* 'for-4.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: Remove depends on HAS_DMA in case of platform dependency
  ata: Fix ZBC_OUT all bit handling
  ata: Fix ZBC_OUT command block check
  ahci: Add Intel Ice Lake LP PCI ID
  ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS
  sata_nv: remove redundant pointers sdev0 and sdev1
  sata_fsl: remove dead code in tag retrieval
  sata_fsl: convert to command iterator
  libata: convert eh to command iterators
  libata: add command iterator helpers
  ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static
  libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()

Pull char/misc fixes from Greg KH:
 "Here are a few char/misc driver fixes for 4.18-rc5.

  The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that
  caused breakages for some people. Thanks to Xiubo Li for fixing them
  quickly. Other than that, minor fixes for thunderbolt, vmw_balloon,
  nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update
  where Rafael is offering to help out with reviewing driver core
  patches.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: Don't let a NULL cell_id for nvmem_cell_get() crash us
  thunderbolt: Notify userspace when boot_acl is changed
  uio: fix crash after the device is unregistered
  uio: change to use the mutex lock instead of the spin lock
  uio: use request_threaded_irq instead
  fpga: altera-cvp: Fix an error handling path in 'altera_cvp_probe()'
  ibmasm: don't write out of bounds in read handler
  MAINTAINERS: Add myself as driver core changes reviewer
  mei: discard messages from not connected client during power down.
  vmw_balloon: fix inflation with batching

Pull staging fixes from Greg KH:
 "Here are two tiny staging driver fixes for reported issues for
  4.18-rc5.

  One fixes the r8822be driver to properly work on lots of new laptops,
  the other is for the rtl8723bs driver to fix an underflow error.

  Both have been in linux-next for a while with no reported issues"

* tag 'staging-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8822be: Fix RTL8822be can't find any wireless AP
  staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data().

Pull USB fixes from Greg KH:
 "Here are a number of small USB fixes for 4.18-rc5.

  Nothing major here, just the normal set of new device ids, xhci fixes,
  and some typec fixes. The typec fix required some tiny changes in an
  i2c driver, which that maintainer acked to come through my tree.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: yurex: fix out-of-bounds uaccess in read handler
  usb: quirks: add delay quirks for Corsair Strafe
  xhci: xhci-mem: off by one in xhci_stream_id_to_ring()
  usb/gadget: aspeed-vhub: add USB_LIBCOMPOSITE dependency
  docs: kernel-parameters.txt: document xhci-hcd.quirks parameter
  USB: serial: mos7840: fix status-register error handling
  USB: serial: keyspan_pda: fix modem-status error handling
  USB: serial: cp210x: add another USB ID for Qivicon ZigBee stick
  USB: serial: ch341: fix type promotion bug in ch341_control_in()
  i2c-cht-wc: Fix bq24190 supplier
  typec: tcpm: Correctly report power_supply current and voltage for non pd supply
  usb: xhci: dbc: Don't decrement runtime PM counter if DBC is not started

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fixup devname in /proc/interrupts for card detect GPIO

  MMC host:
   - sdhci-esdhc-imx: Allow 1.8V speed-modes without 100/200MHz pinctrls
   - sunxi: Disable IRQ in low power state to prevent IRQ storm
   - dw_mmc: Fix card threshold control configuration
   - renesas_sdhi_internal_dmac: Fixup DMA error paths"

* tag 'mmc-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-esdhc-imx: allow 1.8V modes without 100/200MHz pinctrl states
  mmc: sunxi: Disable irq during pm_suspend
  mmc: dw_mmc: fix card threshold control configuration
  mmc: core: cd_label must be last entry of mmc_gpio struct
  mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abort
  mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch

Pull ACPI fix from Rafael Wysocki:
 "Address a regression in ACPICA that ceased to clear the status of GPEs
  and fixed events before entering the ACPI S5 (off) system state during
  the 4.17 cycle which caused some systems to power up immediately after
  they had been turned off"

* tag 'acpi-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Clear status of all events when entering S5

Pull MIPS fixes from Paul Burton:
 "A couple more MIPS fixes for 4.18:

   - Use async IPIs for arch_trigger_cpumask_backtrace() in order to
     avoid warnings & deadlocks, fixing a problem introduced in v3.19
     with the fix trivial to backport as far as v4.9.

   - Fix ioremap()'s MMU/TLB backed path to avoid spuriously rejecting
     valid requests due to an incorrect belief that the memory region is
     backed by potentially-in-use RAM. This fixes a regression in v4.2"

* tag 'mips_fixes_4.18_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix ioremap() RAM check
  MIPS: Use async IPIs for arch_trigger_cpumask_backtrace()
  MIPS: Call dump_stack() from show_regs()

Pull drm fixes from Dave Airlie:
 "This just contains some etnaviv fixes and a MAINTAINERS update for the
  new drm tree locations"

* tag 'drm-fixes-2018-07-10' of git://anongit.freedesktop.org/drm/drm:
  MAINTAINERS: update drm tree
  drm/etnaviv: bring back progress check in job timeout handler
  drm/etnaviv: Fix driver unregistering
  drm/etnaviv: Check for platform_device_register_simple() failure

Mail to dri-devel went out, linux-next was updated, but we forgot this
one here.

Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706072842.9009-1-daniel.vetter@ffwll.ch

Lucas wrote:
"a couple of small fixes:
- 2 patches from Fabio to fix module reloading
- one patch to fix a userspace visible regression, where the job
timeout is a bit too eager and kills legitimate jobs"
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530868450.15725.8.camel@pengutronix.de

Pull HID fixes from Jiri Kosina:

 - spectrev1 pattern fix in hiddev from Gustavo A. R. Silva

 - bounds check fix for hid-debug from Daniel Rosenberg

 - regression fix for HID autobinding from Benjamin Tissoires

 - removal of excessive logging from i2c-hid driver from Jason Andryuk

 - fix specific to 2nd generation of Wacom Intuos devices from Jason
   Gerecke

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hiddev: fix potential Spectre v1
  HID: i2c-hid: Fix "incomplete report" noise
  HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
  HID: debug: check length before copy_to_user()
  HID: core: allow concurrent registration of drivers

Update my TDA998x HDMI encoder MAINTAINERS entry to include the
dt-bindings header, and a keyword pattern to catch patches containing
the DT compatible.  Also change the status to "maintained" rather than
"supported".
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uref->field_index, uref->usage_index, finfo.field_index and cinfo.index can be
indirectly controlled by user-space, hence leading to a potential exploitation
of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/hid/usbhid/hiddev.c:473 hiddev_ioctl_usage() warn: potential spectre issue 'report->field' (local cap)
drivers/hid/usbhid/hiddev.c:477 hiddev_ioctl_usage() warn: potential spectre issue 'field->usage' (local cap)
drivers/hid/usbhid/hiddev.c:757 hiddev_ioctl() warn: potential spectre issue 'report->field' (local cap)
drivers/hid/usbhid/hiddev.c:801 hiddev_ioctl() warn: potential spectre issue 'hid->collection' (local cap)

Fix this by sanitizing such structure fields before using them to index
report->field, field->usage and hid->collection

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Commit ac75a041 ("HID: i2c-hid: fix size check and type usage") started
writing messages when the ret_size is <= 2 from i2c_master_recv.  However, my
device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop
moving the pointing stick or touchpad.  It varies, but you get ~50 messages
each time which spams the log hard.

[  95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2)

This has also been observed with a i2c-ALP0017.

[ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2)

Only print the message when ret_size is totally invalid and less than 2 to cut
down on the log spam.

Fixes: ac75a041 ("HID: i2c-hid: fix size check and type usage")
Reported-by: John Smith <john-s-84@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If pinctrl nodes for 100/200MHz are missing, the controller should
not select any mode which need signal frequencies 100MHz or higher.
To prevent such speed modes the driver currently uses the quirk flag
SDHCI_QUIRK2_NO_1_8_V. This works nicely for SD cards since 1.8V
signaling is required for all faster modes and slower modes use 3.3V
signaling only.

However, there are eMMC modes which use 1.8V signaling and run below
100MHz, e.g. DDR52 at 1.8V. With using SDHCI_QUIRK2_NO_1_8_V this
mode is prevented. When using a fixed 1.8V regulator as vqmmc-supply
the stack has no valid mode to use. In this tenuous situation the
kernel continuously prints voltage switching errors:
  mmc1: Switching to 3.3V signalling voltage failed

Avoid using SDHCI_QUIRK2_NO_1_8_V and prevent faster modes by
altering the SDHCI capability register. With that the stack is able
to select 1.8V modes even if no faster pinctrl states are available:
  # cat /sys/kernel/debug/mmc1/ios
  ...
  timing spec:    8 (mmc DDR52)
  signal voltage: 1 (1.80 V)
  ...

Link: http://lkml.kernel.org/r/20180628081331.13051-1-stefan@agner.chSigned-off-by: Stefan Agner <stefan@agner.ch>
Fixes: ad93220d ("mmc: sdhci-esdhc-imx: change pinctrl state according
to uhs mode")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

After commit 18996f2d (ACPICA: Events: Stop unconditionally
clearing ACPI IRQs during suspend/resume) the status of ACPI events
is not cleared any more when entering the ACPI S5 system state (power
off) which causes some systems to power up immediately after turing
off power in certain situations.

That is a functional regression, so address it by making the code
clear the status of all ACPI events again when entering S5 (for
system-wide suspend or hibernation the clearing of the status of all
events is not desirable, as it might cause the kernel to miss wakeup
events sometimes).

Fixes: 18996f2d (ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume)
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Thomas Hänig <haenig@cosifan.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ARM SoC fixes from Olof Johansson:
 "A small collection of fixes, sort of the usual at this point, all for
  i.MX or OMAP:

   - Enable ULPI drivers on i.MX to avoid a hang

   - Pinctrl fix for touchscreen on i.MX51 ZII RDU1

   - Fixes for ethernet clock references on am3517

   - mmc0 write protect detection fix for am335x

   - kzalloc->kcalloc conversion in an OMAP driver

   - USB metastability fix for USB on dra7

   - Fix touchscreen wakeup on am437x"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx_v4_v5_defconfig: Select ULPI support
  ARM: imx_v6_v7_defconfig: Select ULPI support
  ARM: dts: omap3: Fix am3517 mdio and emac clock references
  ARM: dts: am335x-bone-common: Fix mmc0 Write Protect
  bus: ti-sysc: Use 2-factor allocator arguments
  ARM: dts: dra7: Disable metastability workaround for USB2
  ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
  ARM: dts: am437x: make edt-ft5x06 a wakeup source

Pull x86/pti updates from Thomas Gleixner:
 "Two small fixes correcting the handling of SSB mitigations on AMD
  processors"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR
  x86/bugs: Update when to check for the LS_CFG SSBD mitigation

Pull x86 fixes from Thomas Gleixner:

 - Prevent an out-of-bounds access in mtrr_write()

 - Break a circular dependency in the new hyperv IPI acceleration code

 - Address the build breakage related to inline functions by enforcing
   gnu_inline and explicitly bringing native_save_fl() out of line,
   which also adds a set of _ARM_ARG macros which provide 32/64bit
   safety.

 - Initialize the shadow CR4 per cpu variable before using it.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Don't copy out-of-bounds data in mtrr_write
  x86/hyper-v: Fix the circular dependency in IPI enlightenment
  x86/paravirt: Make native_save_fl() extern inline
  x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>
  compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations
  x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()

Pull scheduler fixes from Thomas Gleixner:

 - The hopefully final fix for the reported race problems in
   kthread_parkme(). The previous attempt still left a hole and was
   partially wrong.

 - Plug a race in the remote tick mechanism which triggers a warning
   about updates not being done correctly. That's a false positive if
   the race condition is hit as the remote CPU is idle. Plug it by
   checking the condition again when holding run queue lock.

 - Fix a bug in the utilization estimation of a run queue which causes
   the estimation to be 0 when a run queue is throttled.

 - Advance the global expiration of the period timer when the timer is
   restarted after a idle period. Otherwise the expiry time is stale and
   the timer fires prematurely.

 - Cure the drift between the bandwidth timer and the runqueue
   accounting, which leads to bogus throttling of runqueues

 - Place the call to cpufreq_update_util() correctly so the function
   will observe the correct number of running RT tasks and not a stale
   one.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kthread, sched/core: Fix kthread_parkme() (again...)
  sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
  sched/fair: Advance global expiration when period timer is restarted
  sched/fair: Fix bandwidth timer clock drift condition
  sched/rt: Fix call to cpufreq_update_util()
  sched/nohz: Skip remote tick on idle task entirely

Pull objtool fix from Thomas Gleixner:
 "A single fix for objtool to address a bug in handling the cold
  subfunction detection for aliased functions which was added recently.
  The bug causes objtool to enter an infinite loop"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Support GCC 8 '-fnoreorder-functions'

Pull crypto fixes from Herbert Xu:

 - add missing RETs in x86 aegis/morus

 - fix build error in arm speck

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86 - Add missing RETs
  crypto: arm/speck - fix building in Thumb2 mode

Pull ext4 bugfixes from Ted Ts'o:
 "Bug fixes for ext4; most of which relate to vulnerabilities where a
  maliciously crafted file system image can result in a kernel OOPS or
  hang.

  At least one fix addresses an inline data bug could be triggered by
  userspace without the need of a crafted file system (although it does
  require that the inline data feature be enabled)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: check superblock mapped prior to committing
  ext4: add more mount time checks of the superblock
  ext4: add more inode number paranoia checks
  ext4: avoid running out of journal credits when appending to an inline file
  jbd2: don't mark block as modified if the handle is out of credits
  ext4: never move the system.data xattr out of the inode body
  ext4: clear i_data in ext4_inode_info when removing inline data
  ext4: include the illegal physical block in the bad map ext4_error msg
  ext4: verify the depth of extent tree in ext4_find_extent()
  ext4: only look at the bg_flags field if it is valid
  ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
  ext4: always check block group bounds in ext4_init_block_bitmap()
  ext4: always verify the magic number in xattr blocks
  ext4: add corruption check in ext4_xattr_set_entry()
  ext4: add warn_on_error mount option

Pull PCI fixes from Bjorn Helgaas:

 - Fix a use-after-free in the endpoint code (Dan Carpenter)

 - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven)

 - Fix an nfp regression caused by a change in how we limit the number
   of VFs we can enable (Jakub Kicinski)

 - Fix failure path cleanup issues in the new R-Car gen3 PHY support
   (Marek Vasut)

 - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc
   Guire)

* tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  nfp: stop limiting VFs to 0
  PCI/IOV: Reset total_VFs limit after detaching PF driver
  PCI: faraday: Add missing of_node_put()
  PCI: xilinx-nwl: Add missing of_node_put()
  PCI: xilinx: Add missing of_node_put()
  PCI: endpoint: Use after free in pci_epf_unregister_driver()
  PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
  PCI: rcar: Clean up PHY init on failure
  PCI: rcar: Shut the PHY down in failpath

Pull cifs fixes from Steve French:
 "Five smb3/cifs fixes for stable (including for some leaks and memory
  overwrites) and also a few fixes for recent regressions in packet
  signing.

  Additional testing at the recent SMB3 test event, and some good work
  by Paulo and others spotted the issues fixed here. In addition to my
  xfstest runs on these, Aurelien and Stefano did additional test runs
  to verify this set"

* tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
  cifs: Fix infinite loop when using hard mount option
  cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
  cifs: Fix memory leak in smb2_set_ea()
  cifs: fix SMB1 breakage
  cifs: Fix validation of signed data in smb2
  cifs: Fix validation of signed data in smb3+
  cifs: Fix use after free of a mid_q_entry

Pull dma-mapping fix from Christoph Hellwig:
 "Revert an incorrect dma-mapping commit for 4.18-rc"

* tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping:
  Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"

Pull dmaengine fixes from Vinod Koul:
 "We have few odd driver fixes and one email update change for you this
  time:

   - Driver fixes for k3dma (off by one), pl330 (burst residue
     granularity) and omap-dma (incorrect residue_granularity)

   - Sinan's email update"

* tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
  dmaengine: pl330: report BURST residue granularity
  MAINTAINERS: Update email-id of Sinan Kaya
  dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity

Pull IPMI fixes from Corey Minyard:
 "A couple of small fixes: one to the BMC side of things that fixes an
  interrupt issue, and one oops fix if init fails in a certain way on
  the client driver"

* tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc: fix IRQ exception if the channel is not open
  ipmi: Cleanup oops on initialization failure

Pull arm64 LDFLAGS clean-up from Catalin Marinas:

 - use aarch64elf instead of aarch64linux

 - move endianness options to LDFLAGS instead from LD

 - remove no-op '-p' linker flag

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: remove no-op -p linker flag
  arm64: add endianness option to LDFLAGS instead of LD
  arm64: Use aarch64elf and aarch64elfb emulation mode variants

Don't access the provided buffer out of bounds - this can cause a kernel
out-of-bounds read when invoked through sys_splice() or other things that
use kernel_write()/__kernel_write().

Fixes: 7f8ec5a4 ("x86/mtrr: Convert to use strncpy_from_user() helper")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com

In commit ca04d9d3 ("phy: qcom-qusb2: New driver for QUSB2 PHY on
Qcom chips") you can see a call like:

  devm_nvmem_cell_get(dev, NULL);

Note that the cell ID passed to the function is NULL.  This is because
the qcom-qusb2 driver is expected to work only on systems where the
PHY node is hooked up via device-tree and is nameless.

This works OK for the most part.  The first thing nvmem_cell_get()
does is to call of_nvmem_cell_get() and there it's documented that a
NULL name is fine.  The problem happens when the call to
of_nvmem_cell_get() returns -EINVAL.  In such a case we'll fall back
to nvmem_cell_get_from_list() and eventually might (if nvmem_cells
isn't an empty list) crash with something that looks like:

 strcmp
 nvmem_find_cell
 __nvmem_device_get
 nvmem_cell_get_from_list
 nvmem_cell_get
 devm_nvmem_cell_get
 qusb2_phy_probe

There are several different ways we could fix this problem:

One could argue that perhaps the qcom-qusb2 driver should be changed
to use of_nvmem_cell_get() which is allowed to have a NULL name.  In
that case, we'd need to add a patche to introduce
devm_of_nvmem_cell_get() since the qcom-qusb2 driver is using devm
managed resources.

One could also argue that perhaps we could just add a name to
qcom-qusb2.  That would be OK but I believe it effectively changes the
device tree bindings, so maybe it's a no-go.

In this patch I have chosen to fix the problem by simply not crashing
when a NULL cell_id is passed to nvmem_cell_get().

NOTE: that for the qcom-qusb2 driver the "nvmem-cells" property is
defined to be optional and thus it's expected to be a common case that
we would hit this crash and this is more than just a theoretical fix.

Fixes: ca04d9d3 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The commit 9aaa3b8b ("thunderbolt: Add support for preboot ACL")
introduced boot_acl attribute but missed the fact that now userspace
needs to poll the attribute constantly to find out whether it has
changed or not. Fix this by sending notification to the userspace
whenever the boot_acl attribute is changed.

Fixes: 9aaa3b8b ("thunderbolt: Add support for preboot ACL")
Reported-and-tested-by: Christian Kellner <christian@kellner.me>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Christian Kellner <christian@kellner.me>
Acked-by: Yehezkel Bernat <yehezkelshb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For the target_core_user use case, after the device is unregistered
it maybe still opened in user space, then the kernel will crash, like:

[  251.163692] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  251.163820] IP: [<ffffffffc0736213>] show_name+0x23/0x40 [uio]
[  251.163965] PGD 8000000062694067 PUD 62696067 PMD 0
[  251.164097] Oops: 0000 [#1] SMP
...
[  251.165605]  e1000 mptscsih mptbase drm_panel_orientation_quirks dm_mirror dm_region_hash dm_log dm_mod
[  251.166014] CPU: 0 PID: 13380 Comm: tcmu-runner Kdump: loaded Not tainted 3.10.0-916.el7.test.x86_64 #1
[  251.166381] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[  251.166747] task: ffff971eb91db0c0 ti: ffff971e9e384000 task.ti: ffff971e9e384000
[  251.167137] RIP: 0010:[<ffffffffc0736213>]  [<ffffffffc0736213>] show_name+0x23/0x40 [uio]
[  251.167563] RSP: 0018:ffff971e9e387dc8  EFLAGS: 00010282
[  251.167978] RAX: 0000000000000000 RBX: ffff971e9e3f8000 RCX: ffff971eb8368d98
[  251.168408] RDX: ffff971e9e3f8000 RSI: ffffffffc0738084 RDI: ffff971e9e3f8000
[  251.168856] RBP: ffff971e9e387dd0 R08: ffff971eb8bc0018 R09: 0000000000000000
[  251.169296] R10: 0000000000001000 R11: ffffffffa09d444d R12: ffffffffa1076e80
[  251.169750] R13: ffff971e9e387f18 R14: 0000000000000001 R15: ffff971e9cfb1c80
[  251.170213] FS:  00007ff37d175880(0000) GS:ffff971ebb600000(0000) knlGS:0000000000000000
[  251.170693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  251.171248] CR2: 0000000000000008 CR3: 00000000001f6000 CR4: 00000000003607f0
[  251.172071] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  251.172640] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  251.173236] Call Trace:
[  251.173789]  [<ffffffffa0c9b2d3>] dev_attr_show+0x23/0x60
[  251.174356]  [<ffffffffa0f561b2>] ? mutex_lock+0x12/0x2f
[  251.174892]  [<ffffffffa0ac6d9f>] sysfs_kf_seq_show+0xcf/0x1f0
[  251.175433]  [<ffffffffa0ac54e6>] kernfs_seq_show+0x26/0x30
[  251.175981]  [<ffffffffa0a63be0>] seq_read+0x110/0x3f0
[  251.176609]  [<ffffffffa0ac5d45>] kernfs_fop_read+0xf5/0x160
[  251.177158]  [<ffffffffa0a3d3af>] vfs_read+0x9f/0x170
[  251.177707]  [<ffffffffa0a3e27f>] SyS_read+0x7f/0xf0
[  251.178268]  [<ffffffffa0f648af>] system_call_fastpath+0x1c/0x21
[  251.178823] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 d3 e8 7e 96 56 e0 48 8b 80 d8 02 00 00 48 89 df 48 c7 c6 84 80 73 c0 <48> 8b 50 08 31 c0 e8 e2 67 44 e0 5b 48 98 5d c3 0f 1f 00 66 2e
[  251.180115] RIP  [<ffffffffc0736213>] show_name+0x23/0x40 [uio]
[  251.180820]  RSP <ffff971e9e387dc8>
[  251.181473] CR2: 0000000000000008

CC: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
CC: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We are hitting a regression with the following commit:

commit a93e7b33
Author: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Date:   Mon May 14 13:32:23 2018 +1200

    uio: Prevent device destruction while fds are open

The problem is the addition of spin_lock_irqsave in uio_write. This
leads to hitting  uio_write -> copy_from_user -> _copy_from_user ->
might_fault and the logs filling up with sleeping warnings.

I also noticed some uio drivers allocate memory, sleep, grab mutexes
from callouts like open() and release and uio is now doing
spin_lock_irqsave while calling them.
Reported-by: Mike Christie <mchristi@redhat.com>
CC: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Prepraing for changing to use mutex lock.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If 'fpga_mgr_create()' fails, we should release some resources, as done
in the other error handling path of the function.

Fixes: 7085e2a9 ("fpga: manager: change api, don't use drvdata")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>