Log a warning once when dma_alloc_coherent fails because the platform
does not support coherent allocations at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>

The logic in dma_direct_alloc when to use the atomic pool vs remapping
grew a bit unreadable.  Consolidate it into a single check, and clean
up the set_uncached vs remap logic a bit as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>

Instead of using arch_dma_alloc if none of the generic coherent
allocators are used, require the architectures to explicitly opt into
providing it.  This will used to deal with the case of m68knommu and
coldfire where we can't do any coherent allocations whatsoever, and
also makes it clear that arch_dma_alloc is a last resort.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>

CONFIG_DMA_GLOBAL_POOL can't be combined with other DMA coherent
allocators.  Add dependencies to Kconfig to document this, and make
kconfig complain about unmet dependencies if someone tries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, netfilter, WiFi.

  Feels like an up-tick in regression fixes, mostly for older releases.
  The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
  fairly clear-cut user reported regressions. The mlx5 DMA bug was
  causing strife for 390x folks. The fixes themselves are not
  particularly scary, tho. No open investigations / outstanding reports
  at the time of writing.

  Current release - regressions:

   - eth: mlx5: perform DMA operations in the right locations, make
     devices usable on s390x, again

   - sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
     curve, previous fix of rejecting invalid config broke some scripts

   - rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock

   - revert "ethtool: Fix mod state of verbose no_mask bitset", needs
     more work

  Current release - new code bugs:

   - tcp: fix listen() warning with v4-mapped-v6 address

  Previous releases - regressions:

   - tcp: allow tcp_disconnect() again when threads are waiting, it was
     denied to plug a constant source of bugs but turns out .NET depends
     on it

   - eth: mlx5: fix double-free if buffer refill fails under OOM

   - revert "net: wwan: iosm: enable runtime pm support for 7560", it's
     causing regressions and the WWAN team at Intel disappeared

   - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
     single skb, fix single-stream perf regression on some devices

  Previous releases - always broken:

   - Bluetooth:
      - fix issues in legacy BR/EDR PIN code pairing
      - correctly bounds check and pad HCI_MON_NEW_INDEX name

   - netfilter:
      - more fixes / follow ups for the large "commit protocol" rework,
        which went in as a fix to 6.5
      - fix null-derefs on netlink attrs which user may not pass in

   - tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
     Debian for keeping HZ=250 alive)

   - net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
     letting frankenstein UDP super-frames from getting into the stack

   - net: fix interface altnames when ifc moves to a new namespace

   - eth: qed: fix the size of the RX buffers

   - mptcp: avoid sending RST when closing the initial subflow"

* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
  Revert "ethtool: Fix mod state of verbose no_mask bitset"
  selftests: mptcp: join: no RST when rm subflow/addr
  mptcp: avoid sending RST when closing the initial subflow
  mptcp: more conservative check for zero probes
  tcp: check mptcp-level constraints for backlog coalescing
  selftests: mptcp: join: correctly check for no RST
  net: ti: icssg-prueth: Fix r30 CMDs bitmasks
  selftests: net: add very basic test for netdev names and namespaces
  net: move altnames together with the netdevice
  net: avoid UAF on deleted altname
  net: check for altname conflicts when changing netdev's netns
  net: fix ifname in netlink ntf during netns move
  net: ethernet: ti: Fix mixed module-builtin object
  net: phy: bcm7xxx: Add missing 16nm EPHY statistics
  ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
  tcp_bpf: properly release resources on error paths
  net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
  net: mdio-mux: fix C45 access returning -EIO after API change
  tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
  octeon_ep: update BQL sent bytes before ringing doorbell
  ...

Merge tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai ChenL
 "Fix 4-level pagetable building, disable WUC for pgprot_writecombine()
  like ioremap_wc(), use correct annotation for exception handlers, and
  a trivial cleanup"

* tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()
  LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
  LoongArch: Export symbol invalid_pud_table for modules building
  LoongArch: Use SYM_CODE_* to annotate exception handlers

Pull slab fix from Vlastimil Babka:

 - stable fix to prevent kernel warnings with KASAN_HW_TAGS on arm64
   due to improperly resolved kmalloc alignment restrictions (Catalin
   Marinas)

* tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign()

Pull seccomp fix from Kees Cook:

 - Fix seccomp_unotify perf benchmark for 32-bit (Jiri Slaby)

* tag 'seccomp-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  perf/benchmark: fix seccomp_unotify benchmark for 32-bit

Pull vfs fix from Christian Brauner:
 "An openat() call from io_uring triggering an audit call can apparently
  cause the refcount of struct filename to be incremented from multiple
  threads concurrently during async execution, triggering a refcount
  underflow and hitting a BUG_ON(). That bug has been lurking around
  since at least v5.16 apparently.

  Switch to an atomic counter to fix that. The underflow check is
  downgraded from a BUG_ON() to a WARN_ON_ONCE() but we could easily
  remove that check altogether tbh"

* tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  audit,io_uring: io_uring openat triggers audit reference count underflow

This reverts commit 108a36d0.

It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
        Supports Wake-on: pg
        Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
        Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
        Wake-on: pg
...

This worked correctly before this commit because we were always updating
a zero bitmap (since commit 66991703 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d0 ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ntfs3 fixes from Konstantin Komarov:

 - memory leak

 - some logic errors, NULL dereferences

 - some code was refactored

 - more sanity checks

* tag 'ntfs3_for_6.6' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Avoid possible memory leak
  fs/ntfs3: Fix directory element type detection
  fs/ntfs3: Fix possible null-pointer dereference in hdr_find_e()
  fs/ntfs3: Fix OOB read in ntfs_init_from_boot
  fs/ntfs3: fix panic about slab-out-of-bounds caused by ntfs_list_ea()
  fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
  fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
  fs/ntfs3: Do not allow to change label if volume is read-only
  fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
  fs/ntfs3: Refactoring and comments
  fs/ntfs3: Fix alternative boot searching
  fs/ntfs3: Allow repeated call to ntfs3_put_sbi
  fs/ntfs3: Use inode_set_ctime_to_ts instead of inode_set_ctime
  fs/ntfs3: Fix shift-out-of-bounds in ntfs_fill_super
  fs/ntfs3: fix deadlock in mark_as_free_ex
  fs/ntfs3: Add more attributes checks in mi_enum_attr()
  fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
  fs/ntfs3: Write immediately updated ntfs state
  fs/ntfs3: Add ckeck in ni_update_parent()

Mat Martineau says:

====================
mptcp: Fixes for v6.6

Patch 1 corrects the logic for MP_JOIN tests where 0 RSTs are expected.

Patch 2 ensures MPTCP packets are not incorrectly coalesced in the TCP
backlog queue.

Patch 3 avoids a zero-window probe and associated WARN_ON_ONCE() in an
expected MPTCP reinjection scenario.

Patches 4 & 5 allow an initial MPTCP subflow to be closed cleanly
instead of always sending RST. Associated selftest is updated.
====================

Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-0-17ecb002e41d@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.

This patch makes sure RST are not sent when removing any subflows or any
addresses.

Fixes: c2b2ae39 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When closing the first subflow, the MPTCP protocol unconditionally
calls tcp_disconnect(), which in turn generates a reset if the subflow
is established.

That is unexpected and different from what MPTCP does with MPJ
subflows, where resets are generated only on FASTCLOSE and other edge
scenarios.

We can't reuse for the first subflow the same code in place for MPJ
subflows, as MPTCP clean them up completely via a tcp_close() call,
while must keep the first subflow socket alive for later re-usage, due
to implementation constraints.

This patch adds a new helper __mptcp_subflow_disconnect() that
encapsulates, a logic similar to tcp_close, issuing a reset only when
the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown
otherwise.

Fixes: c2b2ae39 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Christoph reported that the MPTCP protocol can find the subflow-level
write queue unexpectedly not empty while crafting a zero-window probe,
hitting a warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70
Modules linked in:
CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312
RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00
RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b
RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c
R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580
R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200
FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0
Call Trace:
 <TASK>
 __subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545
 __mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614
 mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391
 release_sock+0xf6/0x100 net/core/sock.c:3521
 mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746
 process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630
 worker_thread+0x3a7/0x610 kernel/workqueue.c:2784
 kthread+0x143/0x180 kernel/kthread.c:388
 ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304
 </TASK>

The root cause of the issue is that expectations are wrong: e.g. due
to MPTCP-level re-injection we can hit the critical condition.

Explicitly avoid the zero-window probe when the subflow write queue
is not empty and drop the related warnings.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/444
Fixes: f70cad10 ("mptcp: stop relying on tcp_tx_skb_cache")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-3-17ecb002e41d@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The MPTCP protocol can acquire the subflow-level socket lock and
cause the tcp backlog usage. When inserting new skbs into the
backlog, the stack will try to coalesce them.

Currently, we have no check in place to ensure that such coalescing
will respect the MPTCP-level DSS, and that may cause data stream
corruption, as reported by Christoph.

Address the issue by adding the relevant admission check for coalescing
in tcp_add_backlog().

Note the issue is not easy to reproduce, as the MPTCP protocol tries
hard to avoid acquiring the subflow-level socket lock.

Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/420Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-2-17ecb002e41d@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.

But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.

Fixes: 6bf41020 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The bitmasks for EMAC_PORT_DISABLE and EMAC_PORT_FORWARD r30 commands are
wrong in the driver.

Update the bitmasks of these commands to the correct ones as used by the
ICSSG firmware. These bitmasks are backwards compatible and work with
any ICSSG firmware version.

Fixes: e9b4ece7 ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231018150715.3085380-1-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fix from David Sterba:
 "Fix a bug in chunk size decision that could lead to suboptimal
  placement and filling patterns"

* tag 'for-6.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix stripe length calculation for non-zoned data chunk allocation

Jakub Kicinski says:

====================
net: fix bugs in device netns-move and rename

Daniel reported issues with the uevents generated during netdev
namespace move, if the netdev is getting renamed at the same time.

While the issue that he actually cares about is not fixed here,
there is a bunch of seemingly obvious other bugs in this code.
Fix the purely networking bugs while the discussion around
the uevent fix is still ongoing.
====================

Link: https://lore.kernel.org/r/20231018013817.2391509-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add selftest for fixes around naming netdevs and namespaces.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The altname nodes are currently not moved to the new netns
when netdevice itself moves:

  [ ~]# ip netns add test
  [ ~]# ip -netns test link add name eth0 type dummy
  [ ~]# ip -netns test link property add dev eth0 altname some-name
  [ ~]# ip -netns test link show dev some-name
  2: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
      altname some-name
  [ ~]# ip -netns test link set dev eth0 netns 1
  [ ~]# ip link
  ...
  3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
      altname some-name
  [ ~]# ip li show dev some-name
  Device "some-name" does not exist.

Remove them from the hash table when device is unlisted
and add back when listed again.

Fixes: 36fbf1e5 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.

Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.

Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:

 [ ~]$ ip link add dev eth0 type dummy

 [ ~]$ ip netns add test
 [ ~]$ ip -netns test link add dev ethX netns test type dummy
 [ ~]$ ip -netns test link property add dev ethX altname eth0
 [ ~]$ ip -netns test link set dev ethX netns 1

 [ ~]$ ip link
 ...
 3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
 ...
 5: ethX: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
     link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
     altname eth0

Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.

Fixes: 36fbf1e5 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.

Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:

 5: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
     link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
 6: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
     link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff

 [ ~]# ip link set dev eth0 netns 1 name eth1

ip monitor inside netns:
 Deleted inet eth0
 Deleted inet6 eth0
 Deleted 5: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
     link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7

Name is reported as eth1 in old netns for ifindex 5, already renamed.

Fixes: d9031024 ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

With CONFIG_TI_K3_AM65_CPSW_NUSS=y and CONFIG_TI_ICSSG_PRUETH=m,
k3-cppi-desc-pool.o is linked to a module and also to vmlinux even though
the expected CFLAGS are different between builtins and modules.

The build system is complaining about the following:

k3-cppi-desc-pool.o is added to multiple modules: icssg-prueth
ti-am65-cpsw-nuss

Introduce the new module, k3-cppi-desc-pool, to provide the common
functions to ti-am65-cpsw-nuss and icssg-prueth.

Fixes: 128d5874 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231018064936.3146846-1-danishanwar@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
netfilter: updates for net

First patch, from Phil Sutter, reduces number of audit notifications
when userspace requests to re-set stateful objects.
This change also comes with a selftest update.

Second patch, also from Phil, moves the nftables audit selftest
to its own netns to avoid interference with the init netns.

Third patch, from Pablo Neira, fixes an inconsistency with the "rbtree"
set backend: When set element X has expired, a request to delete element
X should fail (like with all other backends).

Finally, patch four, also from Pablo, reverts a recent attempt to speed
up abort of a large pending update with the "pipapo" set backend.

It could cause stray references to remain in the set, which then
results in a double-free.

* tag 'nf-23-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: revert do not remove elements if set backend implements .abort
  netfilter: nft_set_rbtree: .deactivate fails if element has expired
  selftests: netfilter: Run nft_audit.sh in its own netns
  netfilter: nf_tables: audit log object reset once per table
====================

Link: https://lore.kernel.org/r/20231018125605.27299-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
A few more fixes:
 * prevent value bounce/glitch in rfkill GPIO probe
 * fix lockdep report in rfkill
 * fix error path leak in mac80211 key handling
 * use system_unbound_wq for wiphy work since it
   can take longer

* tag 'wireless-2023-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  net: rfkill: reduce data->mtx scope in rfkill_fop_open
  net: rfkill: gpio: prevent value glitch during probe
  wifi: mac80211: fix error path key leak
  wifi: cfg80211: use system_unbound_wq for wiphy work
====================

Link: https://lore.kernel.org/r/20231018071041.8175-2-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.
Reported-by: Justin Chen <justin.chen@broadcom.com>
Fixes: f68d08c4 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported a data-race while accessing nh->nh_saddr_genid [1]

Add annotations, but leave the code lazy as intended.

[1]
BUG: KCSAN: data-race in fib_select_path / fib_select_path

write to 0xffff8881387166f0 of 4 bytes by task 6778 on cpu 1:
fib_info_update_nhc_saddr net/ipv4/fib_semantics.c:1334 [inline]
fib_result_prefsrc net/ipv4/fib_semantics.c:1354 [inline]
fib_select_path+0x292/0x330 net/ipv4/fib_semantics.c:2269
ip_route_output_key_hash_rcu+0x659/0x12c0 net/ipv4/route.c:2810
ip_route_output_key_hash net/ipv4/route.c:2644 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2872
send4+0x1f5/0x520 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read to 0xffff8881387166f0 of 4 bytes by task 6759 on cpu 0:
fib_result_prefsrc net/ipv4/fib_semantics.c:1350 [inline]
fib_select_path+0x1cb/0x330 net/ipv4/fib_semantics.c:2269
ip_route_output_key_hash_rcu+0x659/0x12c0 net/ipv4/route.c:2810
ip_route_output_key_hash net/ipv4/route.c:2644 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2872
send4+0x1f5/0x520 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x959d3217 -> 0x959d3218

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 6759 Comm: kworker/u4:15 Not tainted 6.6.0-rc4-syzkaller-00029-gcbf3a2cb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker

Fixes: 436c3b66 ("ipv4: Invalidate nexthop cache nh_saddr more correctly.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231017192304.82626-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the blamed commit below, I completely forgot to release the acquired
resources before erroring out in the TCP BPF code, as reported by Dan.

Address the issues by replacing the bogus return with a jump to the
relevant cleanup code.

Fixes: 419ce133 ("tcp: allow again tcp_disconnect() when threads are waiting")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/8f99194c698bcef12666f0a9a999c58f8b1cb52c.1697557782.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Christian Theune says:
   I upgraded from 6.1.38 to 6.1.55 this morning and it broke my traffic shaping script,
   leaving me with a non-functional uplink on a remote router.

A 'rt' curve cannot be used as a inner curve (parent class), but we were
allowing such configurations since the qdisc was introduced. Such
configurations would trigger a UAF as Budimir explains:
   The parent will have vttree_insert() called on it in init_vf(),
   but will not have vttree_remove() called on it in update_vf()
   because it does not have the HFSC_FSC flag set.

The qdisc always assumes that inner classes have the HFSC_FSC flag set.
This is by design as it doesn't make sense 'qdisc wise' for an 'rt'
curve to be an inner curve.

Budimir's original patch disallows users to add classes with a 'rt'
parent, but this is too strict as it breaks users that have been using
'rt' as a inner class. Another approach, taken by this patch, is to
upgrade the inner 'rt' into a 'sc', warning the user in the process.
It avoids the UAF reported by Budimir while also being more permissive
to bad scripts/users/code using 'rt' as a inner class.

Users checking the `tc class ls [...]` or `tc class get [...]` dumps would
observe the curve change and are potentially breaking with this change.

v1->v2: https://lore.kernel.org/all/20231013151057.2611860-1-pctammela@mojatatu.com/
- Correct 'Fixes' tag and merge with revert (Jakub)

Cc: Christian Theune <ct@flyingcircus.io>
Cc: Budimir Markovic <markovicbudimir@gmail.com>
Fixes: b3d26c57 ("net/sched: sch_hfsc: Ensure inner classes have fsc curve")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231017143602.3191556-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The mii_bus API conversion to read_c45() and write_c45() did not cover
the mdio-mux driver before read() and write() were made C22-only.

This broke arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso.
The -EOPNOTSUPP from mdiobus_c45_read() is transformed by
get_phy_c45_devs_in_pkg() into -EIO, is further propagated to
of_mdiobus_register() and this makes the mdio-mux driver fail to probe
the entire child buses, not just the PHYs that cause access errors.

Fix the regression by introducing special c45 read and write accessors
to mdio-mux which forward the operation to the parent MDIO bus.

Fixes: db1a63ae ("net: phy: Remove fallback to old C45 method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231017143144.3212657-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 75eefc6c ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.

Then later, commit 75c119af ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.

Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.

Many thanks to Stefan for his invaluable help !

Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue")
Link: https://lore.kernel.org/netdev/7f31ddc8-9971-495e-a1f6-819df542e0af@gmx.net/Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231017124526.4060202-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sometimes Tx is completed immediately after doorbell is updated, which
causes Tx completion routing to update completion bytes before the
same packet bytes are updated in sent bytes in transmit function, hence
hitting BUG_ON() in dql_completed(). To avoid this, update BQL
sent bytes before ringing doorbell.

Fixes: 37d79d05 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231017105030.2310966-1-srasheed@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 7d5cb68a (perf/benchmark: add a new benchmark for
seccom_unotify) added a reference to __NR_seccomp into perf. This is
fine as it added also a definition of __NR_seccomp for 64-bit. But it
failed to do so for 32-bit as instead of ifndef, ifdef was used.

Fix this typo (so fix the build of perf on 32-bit).

Fixes: 7d5cb68a (perf/benchmark: add a new benchmark for seccom_unotify)
Cc: Andrei Vagin <avagin@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231017083019.31733-1-jirislaby@kernel.orgSigned-off-by: Kees Cook <keescook@chromium.org>

Pull spi fix from Mark Brown:
 "A fix for the npcm-fiu driver in cases where there are no dummy bytes
  during reads"

* tag 'spi-fix-v6-6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0

Pull regmap fix from Mark Brown:
 "A straightforward fix from Johan for a long standing bug in cases
  where we both have regmaps without devices and something is using
  dev_get_regmap()"

* tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix NULL deref on lookup

nf_tables_abort_release() path calls nft_set_elem_destroy() for
NFT_MSG_NEWSETELEM which releases the element, however, a reference to
the element still remains in the working copy.

Fixes: ebd032fa ("netfilter: nf_tables: do not remove elements if set backend implements .abort")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

This allows to remove an expired element which is not possible in other
existing set backends, this is more noticeable if gc-interval is high so
expired elements remain in the tree. On-demand gc also does not help in
this case, because this is delete element path. Return NULL if element
has expired.

Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>